aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-07seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macroAndy Shevchenko
The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current users, which are many of them, and for new comers to decrease code duplication. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-01-29Merge tag 'regmap-v4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A very busy release for regmap, all fairly specialist stuff but useful: - Support for disabling locking from Bartosz Golaszewski, allowing users that handle their own locking to save some overhead. - Support for hwspinlocks in syscons in MFD from Baolin Wang, this is going through the regmap tree since the first users turned up some some cases that needed interface tweaks with 0 being used as a syscon identifier. - Support for devices with no read or write flag from Andrew F. Davis. - Basic support for devices on SoundWire buses from Vinod Koul" * tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: mfd: syscon: Add hardware spinlock support regmap: Allow empty read/write_flag_mask regcache: flat: Un-inline index lookup from cache access regmap: Add SoundWire bus support regmap: Add one flag to indicate if a hwlock should be used regmap: debugfs: document why we don't create the debugfs entries regmap: debugfs: emit a debug message when locking is disabled regmap: use proper part of work_buf for storing val regmap: potentially duplicate the name string stored in regmap regmap: Disable debugfs when locking is disabled regmap: rename regmap_lock_unlock_empty() to regmap_lock_unlock_none() regmap: allow to disable all locking mechanisms regmap: Remove the redundant config to select hwspinlock
2018-01-29Merge tag 'mfd-next-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for RAVE Supervisory Processor Moved drivers: - Move Realtek Card Reader Driver to Misc New Device Support: - Add support for Pinctrl to axp20x New Functionality: - Add resume support to atmel-flexcom Fix-ups: - Split MFD (mfd) and userspace handlers (platform) in cros_ec - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core - Clean-up error handling in ab8500-debugfs - General tidying up in tmio_core - Kconfig fix-ups for qcom-pm8xxx - Licensing changes (SPDX) to stm32-lptimer, stm32-timers - Device Tree fixups in mc13xxx - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc, kempld-core, intel_soc_pmic_core.c, ab8500-debugfs" * tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro atmel_flexcom: Support resuming after a chip reset mfd: Remove duplicate includes dt-bindings: mfd: mc13xxx: Add the unit address to sysled mfd: stm32: Adopt SPDX identifier mfd: axp20x: Add pinctrl cell for AXP813 mfd: pm8xxx: Make elegible for COMPILE_TEST mfd: kempld-core: Use resource_size function on resource object mfd: tmio: Move register macros to tmio_core.c mfd: cros ec: spi: Simplify delay handling between SPI messages mfd: palmas: Assign the right powerhold mask for tps65917 mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers() mfd: ti_am335x_tscadc: Remove redundant assignment to node mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed' dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver watchdog: Add RAVE SP watchdog driver mfd: Add driver for RAVE Supervisory Processor serdev: Introduce devm_serdev_device_open() ...
2018-01-18Merge branch 'pm-core'Rafael J. Wysocki
* pm-core: (29 commits) dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag PM: i2c-designware-platdrv: Optimize power management PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path PM / core: Assign the wakeup_path status flag in __device_prepare() PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization PM / core: Add helpers for subsystem callback selection PM / wakeup: Drop redundant check from device_init_wakeup() PM / wakeup: Drop redundant check from device_set_wakeup_enable() PM / wakeup: only recommend "call"ing device_init_wakeup() once ...
2018-01-12Merge remote-tracking branches 'regmap/topic/const', 'regmap/topic/flat', ↵Mark Brown
'regmap/topic/hwspinlock' and 'regmap/topic/nolock' into regmap-next
2018-01-12mfd: syscon: Add hardware spinlock supportBaolin Wang
Some system control registers need hardware spinlock to synchronize between the multiple subsystems, so we should add hardware spinlock support for syscon. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPENDRafael J. Wysocki
Make the intel-lpss driver set DPM_FLAG_SMART_SUSPEND for its devices which will allow them to stay in runtime suspend during system suspend unless they need to be reconfigured for some reason. Also make it avoid resuming its child devices if they have DPM_FLAG_SMART_SUSPEND set to allow them to remain in runtime suspend during system suspend. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-01-08mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo LakeMika Westerberg
Just to be on the safe side, don't touch the bit. If write access to the flash chip is needed, the BIOS needs to enable it explicitly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatileHans de Goede
The input current limit bits get updated by the charger detection logic, so we should not cache the contents of this register. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macroAndy Shevchenko
This macro deduplicates a lot of similar code in the ab8500-debugfs.c module. Targeting to be moved to seq_file.h eventually. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08atmel_flexcom: Support resuming after a chip resetRomain Izard
The controller used by a flexcom module is configured at boot, and left alone after this. In the suspend mode called "backup with self-refresh" available on SAMA5D2, the chip will resume with most of its registers reset. In this case, we need to restore the state of the flexcom driver on resume. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: Remove duplicate includesPravin Shedge
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: stm32: Adopt SPDX identifierBenjamin Gaignard
Add SPDX identifier Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: axp20x: Add pinctrl cell for AXP813Quentin Schulz
As GPIO/pinctrl driver now supports AXP813, add a cell for it. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: pm8xxx: Make elegible for COMPILE_TESTLinus Walleij
This should be enabled so that we get full compile coverage of the PM8xxx MFD core with the different subdrivers. Tested on the build servers. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: kempld-core: Use resource_size function on resource objectVasyl Gomonovych
drivers/mfd/kempld-core.c:461:13-16: WARNING: Suspicious code. resource_size is maybe missing with ioport Generated by: scripts/coccinelle/api/resource_size.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: tmio: Move register macros to tmio_core.cMasahiro Yamada
These registers are only used in drivers/mfd/tmio_core.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: cros ec: spi: Simplify delay handling between SPI messagesJon Hunter
The EC SPI driver prevents SPI transfers being to rapidly by keeping track of the time the last transfer was issued via the 'last_transfer_ns' variable. Previously, if the 'last_transfer_ns' variable was zero, this indicated that no previous transfer had been sent and that no delay was needed. However, the EC SPI driver has been updated to always initialise the 'last_transfer_ns' variable during probe and therefore, it is no longer necessary to test if it is zero. Remove the code that checks if this variable is zero. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: palmas: Assign the right powerhold mask for tps65917Keerthy
The powerhold mask for TPS65917 is different when comapred to the other palmas versions. Hence assign the right mask that enables power off of tps65917 pmic correctly. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: ab8500-debugfs: Use common error handling code in ↵Markus Elfring
ab8500_print_modem_registers() Add jump targets so that two error messages are stored only once at the end of this function implementation. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: ti_am335x_tscadc: Remove redundant assignment to nodeColin Ian King
Node is being initialized a value that is never read, it is being written over a few statements into the function with the return value from call to of_get_child_by_name. Hence this initialization can be removed. Cleans up clang warning: drivers/mfd/ti_am335x_tscadc.c:127:22: warning: Value stored to 'node' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'Arvind Yadav
Trivial fix to spelling mistakes in 'pcf50633_client_dev_register'. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08Merge branches 'ib-mfd-leds-4.16', 'ib-mfd-memstick-misc-mmc-4.16', ↵Lee Jones
'ib-mfd-platform-4.16' and 'ib-mfd-tty-watchdog-4.16', tag 'ib-extcon-mfd-4.16-1' into ibs-for-mfd-merged Immutable branch for both MFD and EXTCON tree.
2018-01-08mfd: Add driver for RAVE Supervisory ProcessorAndrey Smirnov
Add a driver for RAVE Supervisory Processor, an MCU implementing various bits of housekeeping functionality (watchdoging, backlight control, LED control, etc) on RAVE family of products by Zodiac Inflight Innovations. This driver implementes core MFD/serdev device as well as communication subroutines necessary for commanding the device. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-05mfd: rtsx: Release IRQ during shutdownSinan Kaya
'Commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")' revealed a resource leak in rtsx_pci driver during shutdown. Issue shows up as a warning during shutdown as follows: remove_proc_entry: removing non-empty directory 'irq/17', leaking at least 'rtsx_pci' WARNING: CPU: 0 PID: 1578 at fs/proc/generic.c:572 remove_proc_entry+0x11d/0x130 Modules linked in <long list but none that are out-of-tree> ... Call Trace: unregister_irq_proc free_desc irq_free_descs mp_unmap_irq acpi_unregister_gsi_apic acpi_pci_irq_disable do_pci_disable_device pci_disable_device device_shutdown kernel_restart Sys_reboot Even though rtsx_pci driver implements a shutdown callback, it is not releasing the interrupt that it registered during probe. This is causing the ACPI layer to complain that the shared IRQ is in use while freeing IRQ. This code releases the IRQ to prevent resource leak and eliminate the warning. Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown") Link: https://bugzilla.kernel.org/show_bug.cgi?id=198141 Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-12-28kernel/irq: Extend lockdep class for request mutexAndrew Lunn
The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
2017-12-15cros_ec: Move cros_ec_dev module to drivers/mfdThierry Escande
The cros_ec_dev module is responsible for registering the MFD devices attached to the ChromeOS EC. This patch moves this module to drivers/mfd so calls to mfd_add_devices() are not done from outside the MFD subtree anymore. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-12-15cros_ec: Split cros_ec_devs moduleThierry Escande
This patch splits the cros_ec_devs module in two parts with a cros_ec_dev module responsible for handling MFD devices registration and a cros_ec_ctl module responsible for handling the various user-space interfaces. For consistency purpose, the driver name for the cros_ec_dev module is now cros-ec-dev instead of cros-ec-ctl. In the next commit, the new cros_ec_dev module will be moved to the MFD subtree so mfd_add_devices() calls are not done from outside MFD. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-29mfd: cros ec: spi: Fix "in progress" error signalingShawn Nematbakhsh
For host commands that take a long time to process, cros ec can return early by signaling a EC_RES_IN_PROGRESS result. The host must then poll status with EC_CMD_GET_COMMS_STATUS until completion of the command. None of the above applies when data link errors are encountered. When errors such as EC_SPI_PAST_END are encountered during command transmission, it usually means the command was not received by the EC. Treating such errors as if they were 'EC_RES_IN_PROGRESS' results is almost always the wrong decision, and can result in host commands silently being lost. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-29mfd: twl6040: Fix child-node lookupJohan Hovold
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Cc: stable <stable@vger.kernel.org> # 3.5 Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-29mfd: twl4030-audio: Fix sibling-node lookupJohan Hovold
A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Cc: stable <stable@vger.kernel.org> # 3.7 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-29mfd: cros ec: spi: Don't send first message too soonJon Hunter
On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Cc: <stable@vger.kernel.org> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-29misc: rtsx: Move Realtek Card Reader Driver to miscRui Feng
Because Realtek card reader drivers are pcie and usb drivers, and they bridge mmc subsystem and memstick subsystem, they are not mfd drivers. Greg and Lee Jones had a discussion about where to put the drivers, the result is that misc is a good place for them, so I move all files to misc. If I don't move them to a right place, I can't add any patch for this driver. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-16Merge tag 'mfd-next-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...
2017-11-14Merge tag 'sound-4.15-rc1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are no big surprising changes in this cycle, yet not too boring, either. The biggest change from diffstat POV is the removal of the legacy OSS driver codes that have been already disabled for a long time. This will bring a few trivial merge conflicts. As new features in ASoC side, there are two things: a new AC97 bus implementation and AMD Stony platform support. Both include the relevant changes shared with other subsystems, e.g. AC97 MFD changes and DRM AMD changes. Some other highlighted topics are: - A bunch of USB-audio drivers got the hardening against the malicious device accesses with a new helper code for endpoint sanity check - Lots of cleanups for ASoC Intel platform code, including support for their open source audio firmware - Continued ASoC core componentization works - Support for scaling MCLK with sample rate in ASoC simple-card - Stabler PCM hot-unplug capability, especially for ASoC usages" * tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits) Documentation: sound: hd-audio: notes.rst ASoC: bcm2835: Support left/right justified and DSP modes ASoC: bcm2835: Enforce full symmetry ASoC: bcm2835: Support additional samplerates up to 384kHz ASoC: bcm2835: Add support for TDM modes ASoC: add mclk-fs support to audio graph card ASoC: add mclk-fs to audio graph card binding ASoC: rt5514: work around link error ASoC: rt5514: mark PM functions as __maybe_unused ASoC: rt5663: Check the JD status in the button pushing ASoC: amd: Modified DMA transfer Mechanism for Playback ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+ ASoC: da7213: add support for DSP modes ASoC: sun8i-codec: Add a comment on the LRCK inversion ASoC: sun8i-codec: Set the BCLK divider ASoC: rt5663: Delay and retry reading rt5663 ID register ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds ASoC: cs42l56: Fix reset GPIO name in example DT binding ASoC: rt5514-spi: check irq status to schedule data copy in resume function ...
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-10Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mfd', ↵Mark Brown
'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01Merge branch 'for-wolfram' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into i2c/for-4.15 Refactor i2c-gpio and its users to use gpiod. Done by GPIO maintainer LinusW.
2017-11-01mfd: axp20x: Add axp20x-regulator cell for AXP813Chen-Yu Tsai
Now that axp20x-regulator supports AXP813, we can add a cell for it to enable it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-01mfd: Add Spreadtrum SC27xx series PMICs driverBaolin Wang
This patch adds support for Spreadtrum SC27xx series PMIC MFD core, and It provides communication through the SPI interfaces. The SC27xx series PMICs contains the following 6 major components: - DCDCs - LDOs - Battery management system - Audio codec - User interface function, such as indicator, flash LED - IC level function, such as power on/off, type-c Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-11-01mfd: ssbi: Use devm_of_platform_populate()Benjamin Gaignard
Use devm_of_platform_populate() instead of of_platform_populate() to be sure that of_platform_depopulate() is called when removing the driver. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-30i2c: gpio: Augment all boardfiles to use open drainLinus Walleij
We now handle the open drain mode internally in the I2C GPIO driver, but we will get warnings from the gpiolib that we override the default mode of the line so it becomes open drain. We can fix all in-kernel users by simply passing the right flag along in the descriptor table, and we already touched all of these files in the series so let's just tidy it up. Cc: Steven Miao <realmz6@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Wu, Aaron <Aaron.Wu@analog.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-30i2c: gpio: Convert to use descriptorsLinus Walleij
This converts the GPIO-based I2C-driver to using GPIO descriptors instead of the old global numberspace-based GPIO interface. We: - Convert the driver to unconditionally grab two GPIOs from the device by index 0 (SDA) and 1 (SCL) which will work fine with device tree and descriptor tables. The existing device trees will continue to work just like before, but without any roundtrip through the global numberspace. - Brutally convert all boardfiles still passing global GPIOs by registering descriptor tables associated with the devices instead so this driver does not need to keep supporting passing any GPIO numbers as platform data. There is no stepwise approach as elegant as this, I strongly prefer this big hammer over any antsteps for this conversion. This way the old GPIO numbers go away and NEVER COME BACK. Special conversion for the different boards utilizing I2C-GPIO: - EP93xx (arch/arm/mach-ep93xx): pretty straight forward as all boards were using the same two GPIO lines, just define these two in a lookup table for "i2c-gpio" and register these along with the device. None of them define any other platform data so just pass NULL as platform data. This platform selects GPIOLIB so all should be smooth. The pins appear on a gpiochip for bank "G" as pins 1 (SDA) and 0 (SCL). - IXP4 (arch/arm/mach-ixp4): descriptor tables have to be registered for each board separately. They all use "IXP4XX_GPIO_CHIP" so it is pretty straight forward. Most board define no other platform data than SCL/SDA so they can drop the #include of <linux/i2c-gpio.h> and assign NULL to platform data. The "goramo_mlr" (Goramo Multilink Router) board is a bit worrisome: it implements its own I2C bit-banging in the board file, and optionally registers an I2C serial port, but claims the same GPIO lines for itself in the board file. This is not going to work: there will be competition for the GPIO lines, so delete the optional extra I2C bus instead, no I2C devices are registered on it anyway, there are just hints that it may contain an EEPROM that may be accessed from userspace. This needs to be fixed up properly by the serial clock using I2C emulation so drop a note in the code. - KS8695 board acs5k (arch/arm/mach-ks8695/board-acs5.c) has some platform data in addition to the pins so it needs to be kept around sans GPIO lines. Its GPIO chip is named "KS8695" and the arch selects GPIOLIB. - PXA boards (arch/arm/mach-pxa/*) use some of the platform data so it needs to be preserved here. The viper board even registers two GPIO I2Cs. The gpiochip is named "gpio-pxa" and the arch selects GPIOLIB. - SA1100 Simpad (arch/arm/mach-sa1100/simpad.c) defines a GPIO I2C bus, and the arch selects GPIOLIB. - Blackfin boards (arch/blackfin/bf533 etc) for these I assume their I2C GPIOs refer to the local gpiochip defined in arch/blackfin/kernel/bfin_gpio.c names "BFIN-GPIO". The arch selects GPIOLIB. The boards get spiked with IF_ENABLED(I2C_GPIO) but that is a side effect of it being like that already (I would just have Kconfig select I2C_GPIO and get rid of them all.) I also delete any platform data set to 0 as it will get that value anyway from static declartions of platform data. - The MIPS selects GPIOLIB and the Alchemy machine is using two local GPIO chips, one of them has a GPIO I2C. We need to adjust the local offset from the global number space here. The ATH79 has a proper GPIO driver in drivers/gpio/gpio-ath79.c and AFAICT the chip is named "ath79-gpio" and the PB44 PCF857x expander spawns from this on GPIO 1 and 0. The latter board only use the platform data to specify pins so it can be cut altogether after this. - The MFD Silicon Motion SM501 is a special case. It dynamically spawns an I2C bus off the MFD using sm501_create_subdev(). We use an approach to dynamically create a machine descriptor table and attach this to the "SM501-LOW" or "SM501-HIGH" gpiochip. We use chip-local offsets to grab the right lines. We can get rid of two local static inline helpers as part of this refactoring. Cc: Steven Miao <realmz6@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Heiko Schocher <hs@denx.de> Acked-by: Wu, Aaron <Aaron.Wu@analog.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-24mfd: fsl-imx25: Clean up irq settings during removalMartin Kaiser
When fsl-imx25-tsadc is compiled as a module, loading, unloading and reloading the module will lead to a crash. Unable to handle kernel paging request at virtual address bf005430 [<c004df6c>] (irq_find_matching_fwspec) from [<c028d5ec>] (of_irq_get+0x58/0x74) [<c028d594>] (of_irq_get) from [<c01ff970>] (platform_get_irq+0x48/0xc8) [<c01ff928>] (platform_get_irq) from [<bf00e33c>] (mx25_tsadc_probe+0x220/0x2f4 [fsl_imx25_tsadc]) irq_find_matching_fwspec() loops over all registered irq domains. The irq domain is still registered from last time the module was loaded but the pointer to its operations is invalid after the module was unloaded. Add a removal function which clears the irq handler and removes the irq domain. With this cleanup in place, it's possible to unload and reload the module. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-24mfd: mxs-lradc: Fix error handling in mxs_lradc_probe()Alexey Khoroshilov
There is the only path, where mxs_lradc_probe() leaves clk undisabled, since it does return instead of goto err_clk. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-24mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT methodJoakim Tjernlund
Avoton/Rangeley are based on Silvermount micro-architecture, like Bay Trail, and uses the INTEL_SPI_BYT method to drive SPI. Cc: stable@vger.kernel.org Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-10-13mfd: tps65218: Introduce dependency on CONFIG_OFKeerthy
Currently the driver boots only via device tree hence add a dependency on CONFIG_OF. This leaves with a bunch of unused code so clean that up. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>