aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2023-07-23mfd: pm8008: Fix module autoloadingJohan Hovold
commit d420c9886f5369697047b880221789bf0054e438 upstream. Add the missing module device table alias to that the driver can be autoloaded when built as a module. Cc: stable@vger.kernel.org # 5.14 Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230526091646.17318-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19mfd: stmpe: Only disable the regulators if they are enabledChristophe JAILLET
[ Upstream commit 104d32bd81f620bb9f67fbf7d1159c414e89f05f ] In stmpe_probe(), if some regulator_enable() calls fail, probing continues and there is only a dev_warn(). So, if stmpe_probe() is called the regulator may not be enabled. It is cleaner to test it before calling regulator_disable() in the remove function. Fixes: 9c9e321455fb ("mfd: stmpe: add optional regulators") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/8de3aaf297931d655b9ad6aed548f4de8b85425a.1686998575.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19mfd: stmfx: Nullify stmfx->vdd in case of errorAmelie Delaunay
[ Upstream commit 7c81582c0bccb4757186176f0ee12834597066ad ] Nullify stmfx->vdd in case devm_regulator_get_optional() returns an error. And simplify code by returning an error only if return code is not -ENODEV, which means there is no vdd regulator and it is not an issue. Fixes: d75846ed08e6 ("mfd: stmfx: Fix dev_err_probe() call in stmfx_chip_init()") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20230609092804.793100-2-amelie.delaunay@foss.st.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19mfd: stmfx: Fix error path in stmfx_chip_initAmelie Delaunay
[ Upstream commit f592cf624531286f8b52e40dcfc157a5a7fb115c ] In error path, disable vdd regulator if it exists, but don't overload ret. Because if regulator_disable() is successful, stmfx_chip_init will exit successfully while chip init failed. Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20230609092804.793100-1-amelie.delaunay@foss.st.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19mfd: intel-lpss: Add missing check for platform_get_resourceJiasheng Jiang
[ Upstream commit d918e0d5824495a75d00b879118b098fcab36fdb ] Add the missing check for platform_get_resource and return error if it fails. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230609014818.28475-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19mfd: wcd934x: Fix an error handling path in wcd934x_slim_probe()Christophe JAILLET
[ Upstream commit f190b4891a3f9fac123a7afd378d4143a2723313 ] If devm_gpiod_get_optional() fails, some resources need to be released, as already done in the .remove() function. While at it, remove the unneeded error code from a dev_err_probe() call. It is already added in a human readable way by dev_err_probe() itself. Fixes: 6a0ee2a61a31 ("mfd: wcd934x: Replace legacy gpio interface for gpiod") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/02d8447f6d1df52cc8357aae698152e9a9be67c6.1684565021.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19mfd: rt5033: Drop rt5033-battery sub-deviceStephan Gerhold
[ Upstream commit 43db1344e0f8c1eb687a1d6cd5b0de3009ab66cb ] The fuel gauge in the RT5033 PMIC (rt5033-battery) has its own I2C bus and interrupt lines. Therefore, it is not part of the MFD device and needs to be specified separately in the device tree. Fixes: 0b271258544b ("mfd: rt5033: Add Richtek RT5033 driver core.") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/6a8a19bc67b5be3732882e8131ad2ffcb546ac03.1684182964.git.jahau@rocketmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDsJarkko Nikula
[ Upstream commit 72d4a1683741ee578da0e265886e6a7f3d42266c ] Add Intel Meteor Lake PCH-S also called as Meteor Point-S LPSS PCI IDs. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230330132618.4108665-1-jarkko.nikula@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24mfd: dln2: Fix memory leak in dln2_probe()Qiang Ning
[ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ] When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets to call usb_put_dev() to decrease the refcount of dln2->usb_dev. Fix this by adding usb_put_dev() in the error handling code of dln2_probe(). Signed-off-by: Qiang Ning <qning0106@126.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_modelsHans de Goede
[ Upstream commit ded99b89d25fd73a1d7bd910378e0339fd9d4c4a ] The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge setup as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to intel_cht_wc_models with driver_data set to INTEL_CHT_WC_LENOVO_YOGABOOK1. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mfd: arizona-spi: Add missing MODULE_DEVICE_TABLECharles Keepax
[ Upstream commit 972c91fd7beddc3f19c8c855f6e60e7dbd435cbd ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as a module. Fixes: 3f65555c417c ("mfd: arizona: Split of_match table into I2C and SPI versions") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230323134138.834369-1-ckeepax@opensource.cirrus.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mfd: ocelot-spi: Fix unsupported bulk readColin Foster
[ Upstream commit f0484d2f80a72022b7fac72bcb406392900ef1eb ] Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read operations over SPI. Many SPI buses have hardware that can optimize consecutive reads. Essentially an address is written to the chip, and if the SPI controller continues to toggle the clock, subsequent register values are reported. This can lead to significant optimizations, because the time between "address is written to the chip" and "chip starts to report data" can often take a fixed amount of time. When support for Ocelot chips were added in commit f3e893626abe ("mfd: ocelot: Add support for the vsc7512 chip via spi") it was believed that this optimization was supported. However it is not. Most register transactions with the Ocelot chips are not done in bulk, so this bug could go unnoticed. The one scenario where bulk register operations _are_ performed is when polling port statistics counters, which was added in commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for stats"). Things get slightly more complicated here... A bug was introduced in commit d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset") that broke the optimization of bulk reads. This means that when Ethernet support for the VSC7512 chip was added in commit 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control") things were actually working "as expected". The bulk read opmtimization was discovered, and fixed in commit 6acc72a43eac ("net: mscc: ocelot: fix stats region batching") and the timing optimizations for SPI were noticed. A bulk read went from ~14ms to ~2ms. But this timing improvement came at the cost of every register reading zero due the fact that bulk reads don't work. The read timings increase back to 13-14ms, but that's a price worth paying in order to receive valid data. This is verified in a DSA setup (cpsw-new switch tied to port 0 on the VSC7512, after having been running overnight) Rx Octets: 16222055 # Counters from CPSW switch Tx Octets: 12034702 Net Octets: 28256757 p00_rx_octets: 12034702 # Counters from Ocelot switch p00_rx_frames_below_65_octets: 0 p00_rx_frames_65_to_127_octets: 88188 p00_rx_frames_128_to_255_octets: 13 p00_rx_frames_256_to_511_octets: 0 p00_rx_frames_512_to_1023_octets: 0 p00_rx_frames_over_1526_octets: 3306 p00_tx_octets: 16222055 Fixes: f3e893626abe ("mfd: ocelot: Add support for the vsc7512 chip via spi") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mfd: tqmx86: Correct board names for TQMxE39xMatthias Schiffer
[ Upstream commit f376c479668557bcc2fd9e9fbc0f53e7819a11cd ] It seems that this driver was developed based on preliminary documentation. Report the correct names for all TQMxE39x variants, as they are used by the released hardware revisions: - Fix names for TQMxE39C1/C2 board IDs - Distinguish TQMxE39M and TQMxE39S, which use the same board ID The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate Uses Configuration) register of the GPIO controller. This also prepares for the correct handling of the differences between the GPIO controllers of our COMe and SMARC modules. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mfd: tqmx86: Specify IO port register range more preciselyMatthias Schiffer
[ Upstream commit 051c69ff4f607aa114c7bbdd7c41ed881367aeee ] Registers 0x160..0x17f are unassigned. Use 0x180 as base register and update offets accordingly. Also change the size of the range to include 0x19f. While 0x19f is currently reserved for future extensions, so are several of the previous registers up to 0x19e, and it is weird to leave out just the last one. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mfd: tqmx86: Do not access I2C_DETECT register through io_baseMatthias Schiffer
[ Upstream commit 1be1b23696b3d4b0231c694f5e0767b4471d33a9 ] The I2C_DETECT register is at IO port 0x1a7, which is outside the range passed to devm_ioport_map() for io_base, and was only working because there aren't actually any bounds checks for IO port accesses. Extending the range does not seem like a good solution here, as it would then conflict with the IO resource assigned to the I2C controller. As this is just a one-off access during probe, use a simple inb() instead. While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leakLiang He
[ Upstream commit 4414a7ab80cebf715045e3c4d465feefbad21139 ] In arizona_clk32k_enable(), we should use pm_runtime_resume_and_get() as pm_runtime_get_sync() will increase the refcnt even when it returns an error. Signed-off-by: Liang He <windhl@126.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105061055.1509261-1-windhl@126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()Qiheng Lin
[ Upstream commit 8b450dcff23aa254844492831a8e2b508a9d522d ] `req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure. Fixes: 08c3e06a5eb2 ("mfd: PCF50633 adc driver") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10mfd: cs5535: Don't build on UMLRandy Dunlap
[ Upstream commit 5ec32a3e4053c1a726b45381d56aa9e39eaf3911 ] The cs5535-mfd driver uses CPU-specific data that is not available for ARCH=um builds, so don't allow it to be built for UML. Prevents these build errors: In file included from ../arch/x86/include/asm/olpc.h:7, from ../drivers/mfd/cs5535-mfd.c:17: ../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’: ../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && ../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 17 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 18 | (boot_cpu_data.x86_model == 5)); ../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’: ../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’ 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’? 23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && ../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’ 24 | (boot_cpu_data.x86 == 5) && ../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’ 25 | (boot_cpu_data.x86_model == 10)); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-04mfd: mt6360: Add bounds checking in Regmap read/write call-backsChiYuan Huang
commit 5f4f94e9f26cca6514474b307b59348b8485e711 upstream. Fix the potential risk of OOB read if bank index is over the maximum. Refer to the discussion list for the experiment result on mt6370. https://lore.kernel.org/all/20220914013345.GA5802@cyhuang-hp-elitebook-840-g3.rt/ If not to check the bound, there is the same issue on mt6360. Cc: stable@vger.kernel.org Fixes: 3b0850440a06c (mfd: mt6360: Merge different sub-devices I2C read/write) Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/1664416817-31590-1-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31mfd: qcom_rpm: Use devm_of_platform_populate() to simplify codeChristophe JAILLET
[ Upstream commit e48dee96046246980d476714b3f6684d45f29c13 ] Use devm_of_platform_populate() instead of hand-writing it. This simplifies the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/fd997dc92b9cee219e9c55e22959a94f4bbf570b.1668949256.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31mfd: pm8008: Fix return value check in pm8008_probe()Yang Yingliang
[ Upstream commit 14f8c55d48e02157519fbcb3a5de557abd8a06e2 ] In case of error, the function devm_regmap_init_i2c() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221125073626.1868229-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()Christophe JAILLET
[ Upstream commit 36579aca877a62f67ecd77eb3edefc4c86292406 ] If an error occurs after the clk_prepare_enable() call, a corresponding clk_disable_unprepare() should be called. Simplify code and switch to devm_clk_get_enabled() to fix it. Fixes: 3526403353c2 ("mfd: qcom_rpm: Handle message RAM clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/e39752476d02605b2be46cab7115f71255ce13a8.1668949256.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQMatti Vaittinen
[ Upstream commit 85842c46fd47fa6bd78681c154223bed27d5fd19 ] The BD957x driver uses REGMAP_IRQ but does not 'select' to depend on it. This can cause build failures. Select REGMAP_IRQ for BD957X. Fixes: 0e9692607f94 ("mfd: bd9576: Add IRQ support") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/Y3SdCWkRr1L64SWK@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fi Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31mfd: axp20x: Do not sleep in the power off handlerSamuel Holland
[ Upstream commit 3f37d4f695cff180033254b9ed5adc8ab927cba9 ] Since commit 856c288b0039 ("ARM: Use do_kernel_power_off()"), the function axp20x_power_off() now runs inside a RCU read-side critical section, so it is not allowed to call msleep(). Use mdelay() instead. Fixes: 856c288b0039 ("ARM: Use do_kernel_power_off()") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221105212909.6526-1-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-23Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"Jason A. Donenfeld
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-07Merge tag 'mfd-next-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-09-29mfd: syscon: Remove repetition of the regmap_get_val_endian()Andy Shevchenko
Since the commit 0dbdb76c0ca8 ("regmap: mmio: Parse endianness definitions from DT") regmap MMIO parses DT itsef, no need to repeat this in the caller(s). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220808140811.26734-1-andriy.shevchenko@linux.intel.com
2022-09-28mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLEYang Yingliang
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: f3e893626abe ("mfd: ocelot: Add support for the vsc7512 chip via spi") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220922103703.1731266-1-yangyingliang@huawei.com
2022-09-28mfd: da9061: Fix Failed to set Two-Wire Bus Mode.Jens Hillenstedt
In da9062_i2c_probe() regmap_clear_bits() tries to access CONFIG_J register. As CONFIG_J is not present in da9061_aa_writeable_ranges[] probe of da9061 fails: da9062 2-0058: Entering I2C mode! da9062 2-0058: Failed to set Two-Wire Bus Mode. da9062: probe of 2-0058 failed with error -5 Add CONFIG_J register to da9061_aa_writeable_ranges[]. Fixes: 5c6f0f456351 ("mfd: da9062: Support SMBus and I2C mode") Signed-off-by: Jens Hillenstedt <jens.hillenstedt@ise.de> Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220915092004.168744-1-jens.hillenstedt@ise.de
2022-09-28mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()Peng Wu
The gpiochip_request_own_desc() function returns error pointers on error, it doesn't return NULL. Fixes: 0ef5164a81fbf ("mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver") Signed-off-by: Peng Wu <wupeng58@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220913071659.94677-1-wupeng58@huawei.com
2022-09-28mfd: sm501: Add check for platform_driver_register()Jiasheng Jiang
As platform_driver_register() can return error numbers, it should be better to check platform_driver_register() and deal with the exception. Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220913091112.1739138-1-jiasheng@iscas.ac.cn
2022-09-28mfd: twl4030: Add missed linux/device.h headerAndy Shevchenko
With compile testing on non-OMAP platforms compiler might be not happy: In function ‘twl4030_sih_setup’: error: implicit declaration of function ‘dev_err’ [-Werror=implicit-function-declaration] error: implicit declaration of function ‘dev_info’ [-Werror=implicit-function-declaration] In function ‘twl4030_init_irq’: error: invalid use of undefined type ‘struct device’ Add missed header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220923175401.8723-1-andriy.shevchenko@linux.intel.com
2022-09-28mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etcAndy Shevchenko
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less heavier for builds than the use of __maybe_unused attributes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220906134256.14293-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2022-09-28mfd: stmpe: Switch to using gpiod APIDmitry Torokhov
This patch switches the driver away from legacy gpio/of_gpio API to gpiod API, and removes use of of_get_named_gpio_flags() which I want to make private to gpiolib. We also need to patch relevant DTS files, as the original code relied on the fact that of_get_named_gpio_flags() would fetch any data encoded in GPIO flags, even if it does not reflect valid flags for a GPIO. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/YxeS1BK2OBH1P/kO@google.com
2022-09-28mfd/omap1: htc-i2cpld: Convert to a pure GPIO driverLinus Walleij
Instead of passing GPIO numbers pertaining to ourselves through platform data, just request GPIO descriptors from our own GPIO chips and use them, and cut down on the unnecessary complexity. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905115810.5987-1-linus.walleij@linaro.org
2022-09-28mfd: intel-m10-bmc: Add d5005 bmc secure update driverRuss Weight
Add the D5005 BMC secure update driver to the MAX10 BMC driver for D5005 devices. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220902165706.518074-2-russell.h.weight@intel.com
2022-09-28mfd: qcom-spmi-pmic: Add support for PMP8074Robert Marko
Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm IPQ8074 SoC-s. It shares the same subtype identifier as PM8901. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220818221815.346233-2-robimarko@gmail.com
2022-09-28mfd: Move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220818210030.7012-1-wsa+renesas@sang-engineering.com
2022-09-28mfd: fsl-imx25: Fix check for platform_get_irq() errorsDan Carpenter
The mx25_tsadc_remove() function assumes all non-zero returns are success but the platform_get_irq() function returns negative on error and positive non-zero values on success. It never returns zero, but if it did then treat that as a success. Fixes: 18f773937968 ("mfd: fsl-imx25: Clean up irq settings during removal") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/YvTfkbVQWYKMKS/t@kili
2022-09-28mfd: rt5120: Add Richtek PMIC supportChiYuan Huang
Add Richtek RT5120 PMIC I2C driver. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/1660100142-32493-3-git-send-email-u0084500@gmail.com
2022-09-28mfd: core: Delete corresponding OF node entries from list on MFD removalMichal Oleszczyk
When we consider MFD which implements hotplug (e.g. USB hotplug driver based on product and vendor IDs) functionality it turns out that its sub-devices are correctly matched with corresponding device tree nodes only at the first time. When physical device reboots or is replugged (and MFD driver is disconnected and probed back again) all sub-devices fails in mfd_add_device() with error 'Failed to locate of_node'. The reason of that behavior is that when any MFD sub-device is created for the first time (and matched with device tree node) it is added to the mfd_of_node_list. It looks like this list is never cleaned even if devices added there are intentionally removed from the system. So when MFD device is replugged and all sub-devices are matched with their device tree nodes again they fail as matched nodes already exist in mfd_of_node_list. In other words current implementation does not support MFD with hotplug feature. This commit extends MFD core for hotplugging support by removing appropriate OF node entry from mfd_of_node_list when corresponding device is removed from the system. Thanks to that when device is added once again it can be matched with its device tree node successfully. Signed-off-by: Michal Oleszczyk <oleszczyk.m@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220809060336.31892-1-m.oleszczyk@grinn-global.com
2022-09-28mfd: twl-core: Fix double "to to" in comment.Jason Wang
The double `to' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220802201757.8142-1-wangborong@cdjrlc.com
2022-09-28mfd: lp8788: Fix an error handling path in lp8788_irq_init() and ↵Christophe JAILLET
lp8788_irq_init() In lp8788_irq_init(), if an error occurs after a successful irq_domain_add_linear() call, it must be undone by a corresponding irq_domain_remove() call. irq_domain_remove() should also be called in lp8788_irq_exit() for the same reason. Fixes: eea6b7cc53aa ("mfd: Add lp8788 mfd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/bcd5a72c9c1c383dd6324680116426e32737655a.1659261275.git.christophe.jaillet@wanadoo.fr
2022-09-28mfd: lp8788: Fix an error handling path in lp8788_probe()Christophe JAILLET
Should an error occurs in mfd_add_devices(), some resources need to be released, as already done in the .remove() function. Add an error handling path and a lp8788_irq_exit() call to undo a previous lp8788_irq_init(). Fixes: eea6b7cc53aa ("mfd: Add lp8788 mfd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/18398722da9df9490722d853e4797350189ae79b.1659261275.git.christophe.jaillet@wanadoo.fr
2022-09-28mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()Christophe JAILLET
If devm_of_platform_populate() fails, some resources need to be released. Introduce a mx25_tsadc_unset_irq() function that undoes mx25_tsadc_setup_irq() and call it both from the new error handling path of the probe and in the remove function. Fixes: a55196eff6d6 ("mfd: fsl-imx25: Use devm_of_platform_populate()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/d404e04828fc06bcfddf81f9f3e9b4babbe35415.1659269156.git.christophe.jaillet@wanadoo.fr
2022-09-28mfd: silergy,sy7636a: Add config option MFD_SY7636AAlistair Francis
Add a specific MFD_SY7636A config option. As part of this change we can use MFD_SY7636A as a dependency for all SY7636a components and also remove the name from MFD_SIMPLE_MFD_I2C as it no longer needs to be selectable. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220525115554.430971-2-alistair@alistair23.me
2022-09-28mfd: mt6370: Add MediaTek MT6370 supportChiYuan Huang
This adds support for the MediaTek MT6370 SubPMIC. MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight driver, display bias voltage supply, one general purpose LDO, and the USB Type-C & PD controller complies with the latest USB Type-C and PD standards. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220805070610.3516-8-peterwu.pub@gmail.com
2022-09-28mfd: rk808: Add Rockchip rk817 battery charger supportChris Morgan
Add rk817 charger support cell to rk808 mfd driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220808173809.11320-3-macroalpha82@gmail.com
2022-09-28mfd: intel_soc_pmic_crc: Update the copyright yearAndy Shevchenko
Update the copyright year to be 2012-2014, 2022. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220801114211.36267-10-andriy.shevchenko@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 22:40:37 +0000