aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/core
AgeCommit message (Expand)Author
2015-08-31mmc: core: fix race condition in mmc_wait_data_doneJialing Fu
2015-08-27mmc: block: skip trim for some kingston eMMCsShawn Lin
2015-08-27mmc: host: use of_property_read_bool()Sergei Shtylyov
2015-08-27mmc: core: Fixed bug in one erase-group budget TRIMRobin van der Gracht
2015-08-17mmc: core: Optimize case for exactly one erase-group budgetDavid Jander
2015-06-04mmc: core: Attach PM domain prior probing of SDIO func driverUlf Hansson
2015-06-04mmc: core: Remove redundant ->power_restore() callback for SDUlf Hansson
2015-06-04mmc: core: Remove redundant ->power_restore() callback for MMCUlf Hansson
2015-06-01mmc: mmc: Add driver strength selectionAdrian Hunter
2015-06-01mmc: mmc: Read card's valid driver strength maskAdrian Hunter
2015-06-01mmc: core: Record card drive strengthAdrian Hunter
2015-06-01mmc: core: Factor out common code in drive strength selectionAdrian Hunter
2015-06-01mmc: core: Add 'card' to drive strength selection callbackAdrian Hunter
2015-06-01mmc: core: Simplify card drive strength maskAdrian Hunter
2015-06-01mmc: core: Allow card drive strength to be different to hostAdrian Hunter
2015-06-01mmc: core: Reset driver type to defaultAdrian Hunter
2015-06-01mmc: core: Increase delay for voltage to stabilize from 3.3V to 1.8VDoug Anderson
2015-06-01mmc: cast u8 to unsigned long long to avoid unexpected errorKuninori Morimoto
2015-06-01mmc: dt: Allow to specify that no write protect signal is presentLars-Peter Clausen
2015-06-01mmc: Add support for disabling write-protect detectionLars-Peter Clausen
2015-06-01mmc: core: Don't print reset warning if reset is not supportedAdrian Hunter
2015-06-01mmc: core: Flag re-tuning is needed on CRC errorsAdrian Hunter
2015-06-01mmc: core: Add support for HS400 re-tuningAdrian Hunter
2015-06-01mmc: core: Separate out the mmc_switch status check so it can be re-usedAdrian Hunter
2015-06-01mmc: mmc: Hold re-tuning in mmc_sleep()Adrian Hunter
2015-06-01mmc: core: Hold re-tuning while bkops ongoingAdrian Hunter
2015-06-01mmc: core: Hold re-tuning during erase commandsAdrian Hunter
2015-06-01mmc: core: Hold re-tuning during switch commandsAdrian Hunter
2015-06-01mmc: core: Add support for re-tuning before each requestAdrian Hunter
2015-06-01mmc: core: Enable / disable re-tuningAdrian Hunter
2015-06-01mmc: host: Add facility to support re-tuningAdrian Hunter
2015-05-25mmc: sdio: add reset callback to bus operationsAndreas Fenkart
2015-05-04mmc: core: add missing pm event in mmc_pm_notify to fix hib restoreGrygorii Strashko
2015-04-17Revert "mmc: core: Convert mmc_driver to device_driver"Ulf Hansson
2015-04-17mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()Javier Martinez Canillas
2015-04-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jik...Linus Torvalds
2015-04-02mmc: Add support for marking hpi as broken through devicetreeHans de Goede
2015-03-31mmc: core: Enable runtime PM management of host devicesUlf Hansson
2015-03-27mmc: core: Remove the ->enable|disable() callbacksNeilBrown
2015-03-23mmc: core: fold mmc_set_bus_width calls into sdio_enable_4bit_bus.NeilBrown
2015-03-23mmc: pwrseq: simplify alloc/free hooksAlexandre Courbot
2015-03-19mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_allocNeilBrown
2015-03-06treewide: Fix typo in printk messagesMasanari Iida
2015-02-04mmc: pwrseq: add driver for emmc hardware resetMarek Szyprowski
2015-02-03mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON stateUlf Hansson
2015-01-30mmc: pwrseq_simple: Add optional reference clock supportJavier Martinez Canillas
2015-01-30mmc: pwrseq_simple: Extend to support more pinsJavier Martinez Canillas
2015-01-29mmc: Resolve BKOPS compatability issueAlexey Skidanov
2015-01-28mmc: pwrseq_simple: Add support for a reset GPIO pinUlf Hansson
2015-01-28mmc: pwrseq: Initial support for the simple MMC power sequence providerUlf Hansson
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 05:42:35 +0000