index
:
linux.git
iio/light/color-sensors
sunxi/cedar/a33-support
sunxi/cedar/mmio-trace
sunxi/cedrus/jpeg-base
sunxi/cedrus/jpeg-nv16
sunxi/platform/irq-debounce
Linux kernel
git repo user
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
drivers
/
mtd
/
devices
Age
Commit message (
Expand
)
Author
2014-04-14
mtd: m25p80: use the SPI nor framework
Brian Norris
2014-03-25
mtd: devices: elm: update DRIVER_NAME as "omap-elm"
Pekon Gupta
2014-03-25
mtd: devices: elm: configure parallel channels based on ecc_steps
Pekon Gupta
2014-03-25
mtd: devices: elm: clean elm_load_syndrome
Pekon Gupta
2014-03-25
mtd: devices: elm: check for hardware engine's design constraints
Pekon Gupta
2014-03-20
mtd: st_spi_fsm: Succinctly reorganise .remove()
Lee Jones
2014-03-20
mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
Lee Jones
2014-03-20
mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
Lee Jones
2014-03-20
mtd: st_spi_fsm: Avoid duplicating MTD core code
Lee Jones
2014-03-20
mtd: st_spi_fsm: Remove useless consts from function arguments
Lee Jones
2014-03-20
mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
Lee Jones
2014-03-20
mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
Lee Jones
2014-03-20
mtd: st_spi_fsm: Add the ability to write to FSM's status register
Lee Jones
2014-03-20
mtd: st_spi_fsm: Add the ability to read the FSM's status
Lee Jones
2014-03-20
mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply a busy wait for post-write status
Lee Jones
2014-03-20
mtd: st_spi_fsm: Write to Flash via the FSM FIFO
Lee Jones
2014-03-20
mtd: st_spi_fsm: Add the ability to read from a Serial Flash device
Lee Jones
2014-03-20
mtd: st_spi_fsm: Prepare default sequences for read/write/erase
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations
Lee Jones
2014-03-20
mtd: st_spi_fsm: Provide the default read/write configurations
Lee Jones
2014-03-20
mtd: st_spi_fsm: Update the flash Volatile Configuration Register
Lee Jones
2014-03-20
mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode
Lee Jones
2014-03-20
mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset
Lee Jones
2014-03-20
mtd: st_spi_fsm: Prepare read/write sequences according to configuration
Lee Jones
2014-03-20
mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode
Lee Jones
2014-03-20
mtd: st_spi_fsm: Provide the erase one sector sequence
Lee Jones
2014-03-20
mtd: st_spi_fsm: Fetch boot-device from mode pins
Lee Jones
2014-03-20
mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s)
Lee Jones
2014-03-20
mtd: st_spi_fsm: Use device size to determine address width
Lee Jones
2014-03-20
mtd: st_spi_fsm: Search for preferred FSM message sequence configurations
Lee Jones
2014-03-20
mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID
Lee Jones
2014-03-20
mtd: st_spi_fsm: Provide device look-up table
Lee Jones
2014-03-20
mtd: devices: Provide header for shared OPCODEs and SFDP commands
Lee Jones
2014-03-20
mtd: st_spi_fsm: Add support for JEDEC ID extraction
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply framework for device requests
Lee Jones
2014-03-20
mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions
Lee Jones
2014-03-20
mtd: st_spi_fsm: Supply all register address and bit logic defines
Lee Jones
2014-03-20
mtd: st_spi_fsm: Allocate resources and register with MTD framework
Lee Jones
2014-03-10
mtd: Fix the behavior of OTP write if there is not enough room for data
Christian Riesch
2014-03-10
mtd: block2mtd: check device size
Fabian Frederick
2014-03-10
mtd: m25p80: add Macronix mx66l1g55g 1Gbit SPI flash
Brian Norris
2014-03-10
mtd: Add a retlen parameter to _get_{fact,user}_prot_info
Christian Riesch
2014-03-10
mtd: m25p80: add support for the Spansion s25fl008k chip
Kuninori Morimoto
2014-03-10
mtd: pmc551: Remove unnecessary OOM messages
Jingoo Han
[prev]
[next]