aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/s3c2410.c
AgeCommit message (Collapse)Author
2017-06-01mtd: nand: Pass the CS line to ->setup_data_interface()Boris Brezillon
Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface() request. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-07mtd: s3c2410: parse the device configuration from OF nodeSergio Prado
Allows configuring Samsung's s3c2410 memory controller using a devicetree. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-07mtd: s3c2410: make ecc mode configurable via platform dataSergio Prado
Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode field in the drivers's platform data structure so it can be selectable via platform data. Also setting this field to NAND_ECC_SOFT in all boards using this driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: s3c2410: Register cpufreq notifier only on S3C24xxKrzysztof Kozlowski
The driver registered for CPU frequency transitions to recalculate its clock when ARM clock frequency changes (ratio between frequencies of ARM's parent clock (fclk) and clock for peripherals remains fixed). This is needed only on S3C24xx platform when cpufreq driver is enabled so limit the ifdef to respective cpufreq Kconfig. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-23mtd: nand: import nand_hw_control_init()Marc Gonzalez
The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-05mtd: nand: s3c2410: set ECC algorithm explicitlyRafał Miłecki
This is part of process deprecating NAND_ECC_SOFT_BCH (and switching to enum nand_ecc_algo). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-05mtd: nand: s3c2410: switch to mtd_ooblayout_opsBoris Brezillon
Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-19mtd: nand: s3c2410: fix bug in s3c2410_nand_correct_data()Zhaoxiu Zeng
If there is only one bit difference in the ECC, the function should return 1. The result of "diff0 & ~(1<<fls(diff0))" is equal to diff0, so the function actually returns -1. Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-01-26mtd: nand: s3c2410: kill the ->ecc_layout fieldBoris BREZILLON
The s3c2410 is allowing board data to overload the default ECC layout defined inside the driver, but this feature is not used by board specific definitions. Kill this field so that we can easily move to a model where ecclayout are dynamically allocated by the NAND controller driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-07mtd: nand: make use of nand_set/get_controller_data() helpersBoris BREZILLON
New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few rebase conflicts] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: remove useless mtd->priv = chip assignmentsBoris BREZILLON
mtd_to_nand() now uses the container_of() approach to transform an mtd_info pointer into a nand_chip one. Drop useless mtd->priv assignments from NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: s3c2410: use the mtd instance embedded in struct nand_chipBoris BREZILLON
struct nand_chip now embeds an mtd device. Make use of this mtd instance. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-08mtd: nand: make use of mtd_to_nand() in NAND driversBoris BREZILLON
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all NAND drivers to use it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: s3c2410: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-07mtd: s3c2410: Constify platform_device_idKrzysztof Kozlowski
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-28mtd: s3c2410: drop useless / misspelled debug printsBrian Norris
s3c2410_nand_probe is not the name of the function. These prints have little utility, so let's just kill them. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-20mtd: nand: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-02mtd: s3c2410: Move to clk_prepare_enable/clk_disable_unprepareVasily Khoruzhick
Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [Brian: dropped one incorrect hunk] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-22mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.cSachin Kamat
plat/regs-nand.h is used only by S3C2410 nand driver. Since there are no other users, merge this file into the driver code to remove platform dependency. While at it also remove unused macros. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: s3c2410: Remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-08-30mtd: nand: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: nand: s3c2410: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-25mtd: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-19Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-11-19Fix misspellings of "whether" in comments.Adam Buchbinder
"Whether" is misspelled in various comments across the tree; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-18mtd: s3c2410: Fix potential NULL pointer dereference errorSachin Kamat
'set' is tested for NULL. But subsequently accessed without the check. Thus making it conditional to avoid NULL pointer dereferencing. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-09Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse
git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
2012-09-29mtd: s3c2410: Fix compiler warningsSachin Kamat
Fixes the following warnings: ‘s3c2410_nand_correct_data’ defined but not used [-Wunused-function] ‘s3c2410_nand_enable_hwecc’ defined but not used [-Wunused-function] ‘s3c2412_nand_enable_hwecc’ defined but not used [-Wunused-function] ‘s3c2440_nand_enable_hwecc’ defined but not used [-Wunused-function] ‘s3c2410_nand_calculate_ecc’ defined but not used [-Wunused-function] ‘s3c2412_nand_calculate_ecc’ defined but not used [-Wunused-function] ‘s3c2440_nand_calculate_ecc’ defined but not used [-Wunused-function] The above functions are called only when CONFIG_MTD_NAND_S3C2410_HWECC is defined. Thus making them conditional. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use devm_* functionsSachin Kamat
devm_* functions are device managed functions and make cleanup code simpler and smaller. devm_kzalloc, devm_clk_get and devm_request_and_ioremap functions are used. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: use %*ph[CN] to dump small buffersAndy Shevchenko
There is new format specified that helps to dump small buffers. It makes the code simpler and nicer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Fix line over 80 characters warningSachin Kamat
Fixes the following checkpatch warnings: WARNING: line over 80 characters Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Fix checkpatch warnings and errors related to whitespacesSachin Kamat
Fixes checkpatch warnings and errors related to whitespaces. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Do not initialise statics to 0 or NULLSachin Kamat
Fixes the following checkpatch errors: ERROR: do not initialise statics to 0 or NULL +static int hardware_ecc = 0; ERROR: do not initialise statics to 0 or NULL +static const int clock_stop = 0; Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use <linux/io.h> instead of <asm/io.h>Sachin Kamat
Fixes the following checkpatch warning: WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use pr_* instead of printkSachin Kamat
Use pr_* instead of printk. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use module_platform_driver()Sachin Kamat
This makes the code simpler by eliminating module_init() and module_exit(). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-03-27mtd: flash drivers set ecc strengthMike Dunn
Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: do not use plain 0 as NULLArtem Bityutskiy
The first 3 arguments of 'mtd_device_parse_register()' are pointers, but many callers pass '0' instead of 'NULL'. Fix this globally. Thanks to coccinelle for making it easy to do with the following semantic patch: @@ expression mtd, types, parser_data, parts, nr_parts; @@ ( -mtd_device_parse_register(mtd, 0, parser_data, parts, nr_parts) +mtd_device_parse_register(mtd, NULL, parser_data, parts, nr_parts) | -mtd_device_parse_register(mtd, types, 0, parts, nr_parts) +mtd_device_parse_register(mtd, types, NULL, parts, nr_parts) | -mtd_device_parse_register(mtd, types, parser_data, 0, nr_parts) +mtd_device_parse_register(mtd, types, parser_data, NULL, nr_parts) ) Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-09-11mtd: s3c2410 nand: Remove uncessary null checkJonghwan Choi
clk_get() return a pointer to the struct clk or an ERR_PTR(). Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: s3c2410.c: use mtd_device_parse_registerDmitry Eremin-Solenikov
Replace custom invocations of parse_mtd_partitions and mtd_device_register with common mtd_device_parse_register call. This would bring: standard handling of all errors, fallback to default partitions, etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: s3c2410 don't specify default parsing optionsDmitry Eremin-Solenikov
Since 'cmdline, NULL' is now a default for parse_mtd_partitions, don't specify this in every driver, instead pass NULL to force parse_mtd_partitions to use default. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-25mtd: s3c2410 nand: convert to mtd_device_register()Jamie Iles
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: nand: fix S3C NAND clock stopJiri Pinkava
Current implementation of s3c2410_nand_select_chip call clk_disable every time when chip = -1 (de-select). This happend multiple times even if chip was already de-selected. This causes disabling clock even if they are already disabled and due to nature of clock subsytem implementation this causes nand clock to be disabled and newer enabled again. Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: s3c nand: parsing command-line partitions prior to set->partitionsConke Hu
Current driver prevents command-line partitions from being parsed when built-in partitions are defined in s3c2410_nand_set object, but it is not desirable in some cases. This patch tries to parse commad-line partitions prior to the built-in. Signed-off-by: Conke Hu <conke@maxwit.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-13drivers/mtd/nand: Use kzallocJulia Lawall
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()David Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 15:55:45 +0000