aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi
AgeCommit message (Collapse)Author
2012-03-27mtd: remove R/O checking duplicationArtem Bityutskiy
Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: do not duplicate length and offset checks in driversArtem Bityutskiy
We already verify that offset and length are within the MTD device size in the MTD API functions. Let's remove the duplicated checks in drivers. This patch only affects the following API's: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch adds a bit of noise by removing too sparse empty lines, but this is not too bad. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: add leading underscore to all mtd functionsArtem Bityutskiy
This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-15UBI: use own macros for the layout volumeRichard Weinberger
This is a minor nicification: UBI_LAYOUT_VOLUME_TYPE and UBI_LAYOUT_VOLUME_ALIGN are currently defined but not used - use them. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-01-15UBI: fix nameless volumes handlingRichard Weinberger
Currently it's possible to create a volume without a name. E.g: ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N "" After that vtbl_check() will always fail because it does not permit empty strings. Cc: stable@kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-01-13Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix key printing UBIFS: use snprintf instead of sprintf when printing keys UBIFS: fix debugging messages UBIFS: make debugging messages light again UBI: fix debugging messages UBI: make vid_hdr non-static
2012-01-11UBI: fix debugging messagesArtem Bityutskiy
Patch ab50ff684707031ed4bad2fdd313208ae392e5bb broke UBI debugging messages: before that commit when UBI debugging was enabled, users saw few useful debugging messages after attaching an MTD device. However, that patch turned 'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have to enable them first via /sys/kernel/debug/dynamic_debug/control, which is very impractical. This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just as it was before the breakage. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org [3.0+]
2012-01-10Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBI: fix use-after-free on error path UBI: fix missing scrub when there is a bit-flip UBIFS: Use kmemdup rather than duplicating its implementation
2012-01-10UBI: make vid_hdr non-staticRichard Weinberger
Remove 'static' modifier from the 'vid_hdr' local variable. I do not know how it slipped in, but this is a bug and will break UBI if someone attaches 2 UBI volumes at the same time. Artem: amended teh commit message, added -stable. Signed-off-by: Richard Weinberger <rw@linutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
2012-01-09mtd: introduce mtd_can_have_bb helperArtem Bityutskiy
This patch introduces new 'mtd_can_have_bb()' helper function which checks whether the flash can have bad eraseblocks. Then it changes all the direct 'mtd->block_isbad' use cases with 'mtd_can_have_bb()'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->sync directlyArtem Bityutskiy
This patch teaches 'mtd_sync()' to do nothing when the MTD driver does not have the '->sync()' method, which allows us to remove all direct 'mtd->sync' accesses. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_block_markbad interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_block_isbad interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_sync interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_erase interfaceArtem Bityutskiy
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-05UBI: fix use-after-free on error pathArtem Bityutskiy
When we fail to erase a PEB, we free the corresponding erase entry object, but then re-schedule this object if the error code was something like -EAGAIN. Obviously, it is a bug to use the object after we have freed it. Reported-by: Emese Revfy <re.emese@gmail.com> Cc: stable@kernel.org [v2.6.23+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-11-30UBI: fix missing scrub when there is a bit-flipBhavesh Parekh
Under some cases, when scrubbing the PEB if we did not get the lock on the PEB it fails to scrub. Add that PEB again to the scrub list Artem: minor amendments. Cc: stable@kernel.org [2.6.31+] Signed-off-by: Bhavesh Parekh <bparekh@nvidia.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-10-31mtd: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker
These two common macros will be no longer present everywhere. Call out the include needs of them explicitly where required. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-21mtd: utilize `mtd_is_*()' functionsBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-19UBI: do not link debug messages when debugging is disabledArtem Bityutskiy
Michal Marek spotted the same issue in UBIFS and this patch fixes UBI, see "UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled" When UBI debugging is disabled, we have debugging messages defined as: if (0) pr_debug() But pr_debug macro defines data structures with debugging data and makes the linux binary larger, even though we have "if (0)". Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits) vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp isofs: Remove global fs lock jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory fix IN_DELETE_SELF on overwriting rename() on ramfs et.al. mm/truncate.c: fix build for CONFIG_BLOCK not enabled fs:update the NOTE of the file_operations structure Remove dead code in dget_parent() AFS: Fix silly characters in a comment switch d_add_ci() to d_splice_alias() in "found negative" case as well simplify gfs2_lookup() jfs_lookup(): don't bother with . or .. get rid of useless dget_parent() in btrfs rename() and link() get rid of useless dget_parent() in fs/btrfs/ioctl.c fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers drivers: fix up various ->llseek() implementations fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek Ext4: handle SEEK_HOLE/SEEK_DATA generically Btrfs: implement our own ->llseek fs: add SEEK_HOLE and SEEK_DATA flags reiserfs: make reiserfs default to barrier=flush ... Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new shrinker callout for the inode cache, that clashed with the xfs code to start the periodic workers later.
2011-07-20fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlersJosef Bacik
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-07UBI: remove dead codeArtem Bityutskiy
Thanks to new gcc 4.6 for issuing the following warning: drivers/mtd/ubi/vtbl.c: In function ‘create_vtbl’: drivers/mtd/ubi/vtbl.c:311:33: warning: variable ‘old_seb’ set but not used [-Wunused-but-set-variable] This patch removes some dead code and fixes the warning. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: dump stack when switching to R/O modeArtem Bityutskiy
If we have debugging enabled and switching to R/O mode because of an error - dump the stack to improve UBI error reporting and make the further diagnostics easier to do. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: fix oops in error pathArtem Bityutskiy
This patch fixes an oops in the error path of 'ubi_attach_mtd_dev()'. If anything after 'uif_init()' fails, we get an oops in 'cancel_pending()'. The reason is that 'uif_close()' drops the last reference count for 'ubi->dev' and whole 'struct ubi_device' is freed. And then 'ubi_wl_close()'->'cancel_pending()' tries to access the 'ubi' pointer and problems begin. Note, in 'ubi_detach_mtd_dev()' function we get a device reference to work-around this issue. Do the same in the error path of 'ubi_attach_mtd_dev()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: switch debugging tests knobs to debugfsArtem Bityutskiy
Kill the UBI 'debug_tsts' module parameter and switch to debugfs. Create per-test mode files there. E.g., to enable bit-flips emulation you may just do: echo 1 > /sys/kernel/debug/ubi/ubi0/tst_emulate_bitflips Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: make it possible to use struct ubi_device in debug.hArtem Bityutskiy
Current layout does not allow us to add inline functions to debug.h which use the 'struct ubi_device' object, because it is undefined there. Move '#include "debug.h"' in "ubi.h" down so to make 'struct ubi_device" be defined. Additionally, this makes it possible to remove a bunch of forward declarations in "debug.h". This is a preparation to the next patch. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: prepare debugging stuff to further debugfs conversionArtem Bityutskiy
We'll need the 'struct ubi_device *ubi' pointer in every debugging function (to access the ->dbg field), so add this pointer to all the functions implementing UBI debugging test modes like 'ubi_dbg_is_bitflip()' etc. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-01UBI: use debugfs for the extra checks knobsArtem Bityutskiy
This patch introduces debugfs support to UBI. All the UBI stuff is kept in the "ubi" debugfs directory, which contains per-UBI device "ubi/ubiX" sub-directories, containing debugging files. This file also creates "ubi/ubiX/chk_gen" and "ubi/ubiX/chk_io" knobs for switching general and I/O extra checks on and off. And it removes the 'debug_chks' UBI module parameters. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-31UBI: change the interface of a debugging check functionArtem Bityutskiy
This is a minor preparational patch which changes the 'paranoid_check_in_wl_tree()' function interface by adding the 'ubi' parameter which will be needed there in the next patch. And while on it, add "const" qualifier to the 'ubi' parameter of the 'paranoid_check_in_pq()' function. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (97 commits) mtd: kill CONFIG_MTD_PARTITIONS mtd: remove add_mtd_partitions, add_mtd_device and friends mtd: convert remaining users to mtd_device_register() mtd: samsung onenand: convert to mtd_device_register() mtd: omap2 onenand: convert to mtd_device_register() mtd: txx9ndfmc: convert to mtd_device_register() mtd: tmio_nand: convert to mtd_device_register() mtd: socrates_nand: convert to mtd_device_register() mtd: sharpsl: convert to mtd_device_register() mtd: s3c2410 nand: convert to mtd_device_register() mtd: ppchameleonevb: convert to mtd_device_register() mtd: orion_nand: convert to mtd_device_register() mtd: omap2: convert to mtd_device_register() mtd: nomadik_nand: convert to mtd_device_register() mtd: ndfc: convert to mtd_device_register() mtd: mxc_nand: convert to mtd_device_register() mtd: mpc5121_nfc: convert to mtd_device_register() mtd: jz4740_nand: convert to mtd_device_register() mtd: h1910: convert to mtd_device_register() mtd: fsmc_nand: convert to mtd_device_register() ... Fixed up trivial conflicts in - drivers/mtd/maps/integrator-flash.c: removed in ARM tree - drivers/mtd/maps/physmap.c: addition of afs partition probe type clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-25mtd: convert remaining users to mtd_device_register()Jamie Iles
The older add_mtd_device()/add_mtd_partitions() and their removal counterparts will soon be gone. Replace uses with mtd_device_register() and mtd_device_unregister(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-20UBI: switch to dynamic printksArtem Bityutskiy
Remove custom dynamic prints and the module parameter to toggle them and use the generic kernel dynamic printk infrastructure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20UBI: turn some macros into static inlineArtem Bityutskiy
Similarly as we have done for UBIFS in 1dcffad74183bb00e8129ba1c5bb2c9931d31bd7, turn the debugging macros into static inline functions, for the same reasons: to avoid gcc 4.5 warnings. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20UBI: improve checking in debugging printsArtem Bityutskiy
When debugging is disabled, define debugging prints as if (0) printk() to make sure that the compiler still the format string in debugging messages even if debugging is disabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: fix typo in a messageArtem Bityutskiy
When a PEB passes the torture test, UBI prints "do not mark it a bad", but should print "do not mark it as bad". This patch corrects the typo. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: fix minor stylistic issuesArtem Bityutskiy
Fix checkpatch.pl errors and warnings: * space before tab * line over 80 characters * include linux/ioctl.h instead of asm/ioctl.h Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: use __packed instead of __attribute__((packed))Artem Bityutskiy
There was an attempt to standartize various "__attribute__" and other macros in order to have potentially portable and more consistent code, see commit 82ddcb040570411fc2d421d96b3e69711c670328. Note, that commit refers Rober Love's blog post, but the URL is broken, the valid URL is: http://blog.rlove.org/2005/10/with-little-help-from-your-compiler.html Moreover, nowadays checkpatch.pl warns about using __attribute__((packed)): "WARNING: __packed is preferred over __attribute__((packed))" It is not a big deal for UBI to use __packed, so let's do it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: re-name set volume properties ioctlArtem Bityutskiy
Rename the ioctl which sets volume properties from 'UBI_IOCSETPROP' to 'UBI_IOCSETVOLPROP' to reflect the fact that this ioctl is about volume properties, not device properties. This is also consistent with the other volume ioctl name - 'UBI_IOCVOLUP'. The main motivation for the re-name, however, is that we are going to introduce the per-UBI device "set properties" ioctl, so we need good and logical naming. At the same time, re-name the "set volume properties request" data structure from 'struct ubi_set_prop_req' to 'struct ubi_set_vol_prop_req'. And re-name 'UBI_PROP_DIRECT_WRITE' to 'UBI_VOL_PROP_DIRECT_WRITE'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: make the control character device non-seekableArtem Bityutskiy
This patch makes the UBI control device (/dev/ubi_ctrl) non-seekable. The seek operation does is not applicable to this file, so it is cleaner to explicitly return error (which the added 'no_llseek()') does than trying to change the position (which the removed 'default_llseek()' does). This is an API break, but the only known user of this interface is mtd-utils which does not need the seeking functionality. And any app which relies on this is broken, but I'm not aware of such apps. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-07Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubifs-2.6: UBI: do not select KALLSYMS_ALL UBI: do not compare array with NULL UBI: check if we are in RO mode in the erase routine UBIFS: fix debugging failure in dbg_check_space_info UBIFS: fix error path in dbg_debugfs_init_fs UBIFS: unify error path dbg_debugfs_init_fs UBIFS: do not select KALLSYMS_ALL UBIFS: fix assertion warnings UBIFS: fix oops on error path in read_pnode UBIFS: do not read flash unnecessarily
2011-04-05UBI: do not select KALLSYMS_ALLArtem Bityutskiy
All UBI needs is to make sure we stacktraces when UBI debugging is enabled. It is enough to select KALLSYMS for this, KALLSYMS_ALL is not necessary. And the current Kconfig line we have: select KALLSYMS_ALL if KALLSYMS && DEBUG_KERNEL is just too complex to be sane and right. But this "if" part there is needed to prevent "unmet direct dependency" warnings, because KALLSYMS_ALL depends on KALLSYMS and DEBUG_KERNEL, so we cannot just select KALLSYMS_ALL. Anyway, this feels messy, and we do not seem to really need KALLSYMS_ALL, so select KALLSYMS instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-04-05UBI: do not compare array with NULLArtem Bityutskiy
Coverity spotted that UBI debugging code tries to compare an array and NULL, which obviously makes little sense. Kill this check. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-05UBI: check if we are in RO mode in the erase routineArtem Bityutskiy
'do_sync_erase()' has to check whether we are in R/O mode before erasing the PEB. This patch adds the check and while on it, adds an assertion which validates the 'pnum' argument, as well as removes a check which is always true because it has already been done few lines before. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-24UBI: use GFP_NOFS properlyArtem Bityutskiy
This patch fixes a brown-paperbag bug which was introduced by me: I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make sure my allocations do not cause write-back. But the correct form is "GFP_NOFS". Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-03-18Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits) UBIFS: clean-up commentaries UBIFS: save 128KiB or more RAM UBIFS: allocate orphans scan buffer on demand UBIFS: allocate lpt dump buffer on demand UBIFS: allocate ltab checking buffer on demand UBIFS: allocate scanning buffer on demand UBIFS: allocate dump buffer on demand UBIFS: do not check data crc by default UBIFS: simplify UBIFS Kconfig menu UBIFS: print max. index node size UBIFS: handle allocation failures in UBIFS write path UBIFS: use max_write_size during recovery UBIFS: use max_write_size for write-buffers UBIFS: introduce write-buffer size field UBI: incorporate LEB offset information UBIFS: incorporate maximum write size UBI: provide LEB offset information UBI: incorporate maximum write size UBIFS: fix LEB number in printk UBIFS: restrict world-writable debugfs files ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 23:11:04 +0000