aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2015-11-16mtd: nand: fix shutdown/reboot for multi-chip systemsBrian Norris
If multiple NAND chips are registered to the same controller, then when rebooting the system, the first one will grab the controller lock, while the second will wait forever for the first one to release it. i.e., a classic deadlock. This problem was solved for a similar case (suspend/resume) back in commit 6b0d9a841249 ("mtd: nand: fix multi-chip suspend problem"), and the shutdown state really isn't much different for us, so rather than adding a new special case to nand_get_device(), we can just overload the FL_PM_SUSPENDED state. Now, multiple chips can "get" the same controller lock (preventing further I/O), while we still allow other chips to pass through nand_shutdown(). Original report: http://thread.gmane.org/gmane.linux.drivers.mtd/59726 http://lists.infradead.org/pipermail/linux-mtd/2015-July/059992.html Fixes: 72ea403669c7 ("mtd: nand: added nand_shutdown") Reported-by: Andrew E. Mileski <andrewm@isoar.ca> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Andrew E. Mileski <andrewm@isoar.ca> Acked-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-16mtd: jz4740_nand: fix build on jz4740 after removing gpio.hBrian Norris
Fallout from commit 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") We see errors like this: drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_detect_bank': drivers/mtd/nand/jz4740_nand.c:340:9: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c:340:9: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/nand/jz4740_nand.c:359:2: error: implicit declaration of function 'jz_gpio_set_function' [-Werror=implicit-function-declaration] drivers/mtd/nand/jz4740_nand.c:359:29: error: 'JZ_GPIO_FUNC_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c:399:29: error: 'JZ_GPIO_FUNC_NONE' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_probe': drivers/mtd/nand/jz4740_nand.c:528:13: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) drivers/mtd/nand/jz4740_nand.c: In function 'jz_nand_remove': drivers/mtd/nand/jz4740_nand.c:555:14: error: 'JZ_GPIO_MEM_CS0' undeclared (first use in this function) Patched similarly to: https://patchwork.linux-mips.org/patch/11089/ Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-10Merge tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS updates from Richard Weinberger: - access time support for UBIFS by Dongsheng Yang - random cleanups and bug fixes all over the place * tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs: ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs ubifs: make ubifs_[get|set]xattr atomic UBIFS: Delete unnecessary checks before the function call "iput" UBI: Remove in vain semicolon UBI: Fastmap: Fix PEB array type UBIFS: Fix possible memory leak in ubifs_readdir() fs/ubifs: remove unnecessary new_valid_dev check ubi: fastmap: Implement produce_free_peb() UBIFS: print verbose message when rescanning a corrupted node UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened UBI: drop null test before destroy functions UBI: Update comments to reflect UBI_METAONLY flag UBI: Fix debug message UBI: Fix typo in comment UBI: Fastmap: Simplify expression UBIFS: fix a typo in comment of ubifs_budget_req UBIFS: use kmemdup rather than duplicating its implementation
2015-11-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
2015-11-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "Trivial stuff from trivial tree that can be trivially summed up as: - treewide drop of spurious unlikely() before IS_ERR() from Viresh Kumar - cosmetic fixes (that don't really affect basic functionality of the driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek - various comment / printk fixes and updates all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: bcache: Really show state of work pending bit hwmon: applesmc: fix comment typos Kconfig: remove comment about scsi_wait_scan module class_find_device: fix reference to argument "match" debugfs: document that debugfs_remove*() accepts NULL and error values net: Drop unlikely before IS_ERR(_OR_NULL) mm: Drop unlikely before IS_ERR(_OR_NULL) fs: Drop unlikely before IS_ERR(_OR_NULL) drivers: net: Drop unlikely before IS_ERR(_OR_NULL) drivers: misc: Drop unlikely before IS_ERR(_OR_NULL) UBI: Update comments to reflect UBI_METAONLY flag pktcdvd: drop null test before destroy functions
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06UBI: Remove in vain semicolonRichard Weinberger
...found while browsing. Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-06UBI: Fastmap: Fix PEB array typeEzequiel García
The PEB array is an array of __be32, so let's fix the scan_pool() prototype accordingly. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-06Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "Core: - WARN (in some cases) when a struct mtd_info is registered multiple times; in the past this was "supported", but it's still error prone for future development. There's only one ugly case of this left in the tree (that we're aware of) and the owners are aware of the problems there. - fix potential deadlock in the blkdev removal path NOTE: the (potential) deadlock was introduced in a for-stable patch. This one is also marked for -stable. - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space vs 64-bit kernel space - Set MTD parent device correctly throughout the tree, so the tree structure appears correctly in sysfs; many drivers were missing this (soft) requirement - Move device tree partitions (ofpart) into a dedicated 'partitions' subnode; this helps to disambiguate whether a node is a partition or some other auxiliary data - Improve error handling for partitioning failures NAND: - General: Increase timeout period, for corner-case systems with less-than-accurate jiffies - Fix OF-based autoloading of several NAND drivers when built as modules - pxa3xx_nand: - Rework timing configuration to be more dynamic - Refactor PM support - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips) - sunxi_nand: refactoring and a few bug fixes - vf610: new NAND driver - FSMC: add SW BCH support; support common NAND DT bindings - lpc32xx_slc: refactor and improve timing calculations logic - denali: support for rev 5.1 SPI NOR: - Layering improvements - Added Winbond lock/unlock support - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support - Increase full-chip-erase timeout linearly with flash size - fsl-quadspi: fix compile for non-ARM architectures - New flash support" * tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits) mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call mtd: nand: sunxi: avoid retrieving data before ECC pass mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk() mtd: blkdevs: fix potential deadlock + lockdep warnings mtd: ofpart: move ofpart partitions to a dedicated dt node doc: dt: mtd: support partitions in a special 'partitions' subnode mtd: brcmnand: Force 8bit mode before doing nand_scan_ident() mtd: brcmnand: factor out CFG and CFG_EXT bitfields mtd: mtdpart: Do not fail mtd probe when parsing partitions fails mtd: fsl-quadspi: fix macro collision problems with READ/WRITE mtd: warn when registering the same master many times mtd: fixup corner case error handling in mtd_device_parse_register() mtd: tests: Replace timeval with ktime_t mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600 mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper mtd: nand: increase ready wait timeout and report timeouts mtd: docg3: off by one in doc_register_sysfs() mtd: pxa3xx_nand: clean up the pxa3xx timings mtd: pxa3xx_nand: rework flash detection and timing setup mtd: pxa3xx_nand: add helpers to setup the timings ...
2015-11-06mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_callBrian Norris
There are multiple types of users of mtd->reboot_notifier.notifier_call: (1) A while back, the cfi_cmdset_000{1,2} chip drivers implemented a reboot notifier to (on a best effort basis) attempt to reset their flash chips before rebooting. (2) More recently, we implemented a common _reboot() hook so that MTD drivers (particularly, NAND flash) could better halt I/O operations without having to reimplement the same notifier boilerplate. Currently, the WARN_ONCE() condition here was written to handle (2), but at the same time it mis-diagnosed case (1) as an already-registered MTD. Let's fix this by having the WARN_ONCE() condition better imitate the condition that immediately follows it. (Wow, I don't know how I missed that one.) (Side note: Unfortunately, we can't yet combine the reboot notifier code for (1) and (2) with a patch like [1], because some users of (1) also use mtdconcat, and so the mtd_info struct from cfi_cmdset_000{1,2} won't actually get registered with mtdcore, and therefore their reboot notifier won't get registered.) [1] http://patchwork.ozlabs.org/patch/417981/ Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jesper Nilsson <jespern@axis.com> Cc: linux-cris-kernel@axis.com Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-02mtd: nand: sunxi: avoid retrieving data before ECC passBoris BREZILLON
The in-band data are copied twice: before ECC correction and after the ECC engine has fixed all the fixable bitflips. Drop the useless memcpy_fromio operation by passing a NULL pointer when calling sunxi_nfc_read_buf(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-02mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk()Boris BREZILLON
The sunxi_nfc_hw_ecc_read/write_chunk() functions try to avoid changing the column address if unnecessary, but the logic to determine whether it's necessary or not is currently wrong: it adds the ecc->bytes value to the current offset where it should actually add ecc->size. Fixes: 913821bdd211 ("mtd: nand: sunxi: introduce sunxi_nfc_hw_ecc_read/write_chunk()") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-30mtd: blkdevs: fix potential deadlock + lockdep warningsBrian Norris
Commit 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") fixed a race condition but due to poor ordering of the mutex acquisition, introduced a potential deadlock. The deadlock can occur, for example, when rmmod'ing the m25p80 module, which will delete one or more MTDs, along with any corresponding mtdblock devices. This could potentially race with an acquisition of the block device as follows. -> blktrans_open() -> mutex_lock(&dev->lock); -> mutex_lock(&mtd_table_mutex); -> del_mtd_device() -> mutex_lock(&mtd_table_mutex); -> blktrans_notify_remove() -> del_mtd_blktrans_dev() -> mutex_lock(&dev->lock); This is a classic (potential) ABBA deadlock, which can be fixed by making the A->B ordering consistent everywhere. There was no real purpose to the ordering in the original patch, AFAIR, so this shouldn't be a problem. This ordering was actually already present in del_mtd_blktrans_dev(), for one, where the function tried to ensure that its caller already held mtd_table_mutex before it acquired &dev->lock: if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so we always acquire mtd_table_mutex first. Snippets of the lockdep output follow: # modprobe -r m25p80 [ 53.419251] [ 53.420838] ====================================================== [ 53.427300] [ INFO: possible circular locking dependency detected ] [ 53.433865] 4.3.0-rc6 #96 Not tainted [ 53.437686] ------------------------------------------------------- [ 53.444220] modprobe/372 is trying to acquire lock: [ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.457271] [ 53.457271] but task is already holding lock: [ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100 [ 53.471321] [ 53.471321] which lock already depends on the new lock. [ 53.471321] [ 53.479856] [ 53.479856] the existing dependency chain (in reverse order) is: [ 53.487660] -> #1 (mtd_table_mutex){+.+.+.}: [ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4 [ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0 [ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320 [ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314 [ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c [ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0 [ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc [ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.536375] -> #0 (&new->lock){+.+...}: [ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc [ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc [ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84 [ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100 [ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8 [ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48 [ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34 [ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114 [ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c [ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108 [ 53.600748] [<c03dacc0>] device_del+0x10c/0x210 [ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20 [ 53.611849] [<c046d878>] __unregister+0x10/0x20 [ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c [ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c [ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8 [ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114 [ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8 [ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0 [ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4 [ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c [ 53.664621] [ 53.664621] other info that might help us debug this: [ 53.664621] [ 53.672979] Possible unsafe locking scenario: [ 53.672979] [ 53.679169] CPU0 CPU1 [ 53.683900] ---- ---- [ 53.688633] lock(mtd_table_mutex); [ 53.692383] lock(&new->lock); [ 53.698306] lock(mtd_table_mutex); [ 53.704658] lock(&new->lock); [ 53.707946] [ 53.707946] *** DEADLOCK *** Fixes: 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount") Reported-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <stable@vger.kernel.org>
2015-10-30mtd: ofpart: move ofpart partitions to a dedicated dt nodeMichal Suchanek
Parsing direct subnodes of a mtd device as partitions is unreliable since the mtd device is also part of its bus subsystem and can contain bus data in subnodes. Move ofpart data to a subnode of its own so it is clear which data is part of the partition layout. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-30mtd: brcmnand: Force 8bit mode before doing nand_scan_ident()Anup Patel
Just like other NAND controllers, the NAND READID command only works in 8bit mode for all versions of BRCMNAND controller. This patch forces 8bit mode for each NAND CS in brcmnand_init_cs() before doing nand_scan_ident() to ensure that BRCMNAND controller is in 8bit mode when NAND READID command is issued. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-30mtd: brcmnand: factor out CFG and CFG_EXT bitfieldsBrian Norris
Use enum instead of magic numbers for CFG and CFG_EXT bitfields. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Anup Patel <anup.patel@broadcom.com>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26mtd: mtdpart: Do not fail mtd probe when parsing partitions failsBrian Norris
Due to wrong assumption in ofpart ofpart fails on Exynos on SPI chips with no partitions because the subnode containing controller data confuses the ofpart parser. Thus compiling in ofpart support automatically fails probing any SPI NOR flash without partitions on Exynos. Compiling in a partitioning scheme should not cause probe of otherwise valid device to fail. Instead, let's do the following: * try parsers until one succeeds * if no parser succeeds, report the first error we saw * even in the failure case, allow MTD to probe, with fallback partitions or no partitions at all -- the master device will still be registered Issue report and comments initially by Michal Suchanek. Reported-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: fsl-quadspi: fix macro collision problems with READ/WRITEHan Xu
Change the READ/WRITE to FSL_READ/FSL_WRITE to resolve any possible namespace collisions with READ/WRITE macros (e.g., from <linux/fs.h>). Problems have been seen, for example, on mips: >> drivers/mtd/spi-nor/fsl-quadspi.c:186:5: error: 'LUT_0' undeclared (first use in this function) ((LUT_##ins) << INSTR0_SHIFT)) ^ >> drivers/mtd/spi-nor/fsl-quadspi.c:188:30: note: in expansion of macro 'LUT0' On SPARC: drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_init_lut': drivers/mtd/spi-nor/fsl-quadspi.c:369:1: error: 'LUT_0' undeclared (first use in this function) drivers/mtd/spi-nor/fsl-quadspi.c:418:1: error: pasting "LUT_" and "(" does not give a valid preprocessing token drivers/mtd/spi-nor/fsl-quadspi.c:418:2: error: implicit declaration of function 'LUT_' And surely on others. Fixes: d26a22d06708 ("mtd: fsl-quadspi: allow building for other ARCHes with COMPILE_TEST") Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Han Xu <b45815@freescale.com> [Brian: rewrote commit description] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: warn when registering the same master many timesBrian Norris
When CONFIG_MTD_PARTITIONED_MASTER=y, it is fatal to call mtd_device_parse_register() twice on the same MTD, as we try to register the same device/kobject multipile times. When CONFIG_MTD_PARTITIONED_MASTER=n, calling mtd_device_parse_register() is more of just a nuisance, as we can mostly navigate around any conflicting actions. But anyway, doing so is a Bad Thing (TM), and we should complain loudly for any drivers that try to do this. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2015-10-26mtd: fixup corner case error handling in mtd_device_parse_register()Brian Norris
Since commit 3efe41be224c ("mtd: implement common reboot notifier boilerplate"), we might try to register a reboot notifier for an MTD that failed to register. Let's avoid this by making the error path clearer. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2015-10-26mtd: tests: Replace timeval with ktime_tShraddha Barke
Changes the 32-bit time type timeval to the 64-bit time type ktime_t, since 32-bit systems using struct timeval will break in the year 2038. Correspondingly change do_gettimeofday() to ktime_get() since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval.Here, ktime_get() is used instead of ktime_get_real() since ktime_get() uses monotonic clock. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600Stefan Roese
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can be used by boards equipped with a NAND chip that requires 4-bit ECC strength. The SPEAr600 HW ECC only supports 1-bit ECC strength. To enable SW BCH4, you need to specify this in your nand controller DT node: nand-ecc-mode = "soft_bch"; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; Tested on a custom SPEAr600 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> [Brian: tweaked the comments a bit] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helperBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-10-26mtd: nand: increase ready wait timeout and report timeoutsAlex Smith
If nand_wait_ready() times out, this is silently ignored, and its caller will then proceed to read from/write to the chip before it is ready. This can potentially result in corruption with no indication as to why. While a 20ms timeout seems like it should be plenty enough, certain behaviour can cause it to timeout much earlier than expected. The situation which prompted this change was that CPU 0, which is responsible for updating jiffies, was holding interrupts disabled for a fairly long time while writing to the console during a printk, causing several jiffies updates to be delayed. If CPU 1 happens to enter the timeout loop in nand_wait_ready() just before CPU 0 re- enables interrupts and updates jiffies, CPU 1 will immediately time out when the delayed jiffies updates are made. The result of this is that nand_wait_ready() actually waits less time than the NAND chip would normally take to be ready, and then read_page() proceeds to read out bad data from the chip. The situation described above may seem unlikely, but in fact it can be reproduced almost every boot on the MIPS Creator Ci20. Therefore, this patch increases the timeout to 400ms. This should be enough to cover cases where jiffies updates get delayed. In nand_wait() the timeout was previously chosen based on whether erasing or programming. This is changed to be 400ms unconditionally as well to avoid similar problems there. nand_wait() is also slightly refactored to be consistent with nand_wait{,_status}_ready(). These changes should have no effect during normal operation. Debugging this was made more difficult by the misleading comment above nand_wait_ready() stating "The timeout is caught later" - no timeout was ever reported, leading me away from the real source of the problem. Therefore, a pr_warn() is added when a timeout does occur so that it is easier to pinpoint similar problems in future. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Reviewed-by: Niklas Cassel <niklas.cassel@axis.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: docg3: off by one in doc_register_sysfs()Dan Carpenter
Smatch found a bug in the error handling: drivers/mtd/devices/docg3.c:1634 doc_register_sysfs() error: buffer overflow 'doc_sys_attrs' 4 <= 4 The problem is that if the very last device_create_file() fails, then we are beyond the end of the array. Actually, any time i == 3 then there is a problem. We can fix this an simplify the code at the same time by moving the !ret conditions out of the for loops and using a goto instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: clean up the pxa3xx timingsAntoine Ténart
With the previous modifications, lots of pxa3xx specific definitions can be removed. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: rework flash detection and timing setupAntoine Ténart
Rework the pxa3xx_nand driver to allow using functions exported by the nand framework to detect the flash and the timings. Then setup the timings using the helpers previously added. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: add helpers to setup the timingsAntoine Ténart
Add helpers to setup the timings in the pxa3xx driver. These helpers allow to either make use of the nand framework nand_sdr_timings or the pxa3xx specific pxa3xx_nand_host, for compatibility reasons. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: pxa3xx_nand: fix some compile issues on non-ARM archesAntoine Ténart
Using readsl() result in a build error on i386. Fix this by using ioread32_rep() instead, to allow compile testing the pxa3xx nand driver on other architectures later. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: lpc32xx_mlc: fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #206 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x208/0x248) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: lpc32xx_slc: fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #201 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x290/0x568) [<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20) [<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: maps: rbtx4939-flash: fix compile errorBrian Norris
We got the syntax wrong here. Compile tested this time! Error: drivers/mtd/maps/rbtx4939-flash.c: In function 'rbtx4939_flash_probe': >> drivers/mtd/maps/rbtx4939-flash.c:99:11: error: request for member 'dev' in something not a structure or union info->mtd.dev.parent = &dev->dev; ^ Fixes: 9aa7e50276c1 ("mtd: maps: rbtx4939-flash: show parent device in sysfs") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Frans Klaver <fransklaver@gmail.com>
2015-10-19mtd: mtdram: check offs and len in mtdram->eraseDongsheng Yang
We should prevent user to erasing mtd device with an unaligned offset or length. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: pxa3xx_nand: switch to device PMBrian Norris
The old PM model is deprecated. This is equivalent. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-19mtd: pxa3xx_nand: don't duplicate MTD suspend/resumeBrian Norris
mtd_{suspend,resume}() get called from mtdcore in a class suspend/resume callback. We don't need to call them again here. In practice, this would actually work OK, as nand_base actually handles nesting OK -- it just might print warnings. Untested, but there are few (no?) users of PM for this driver AFAIK. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2015-10-19mtd: fsl-quadspi: Include <linux/sizes.h> to avoid build errorFabio Estevam
Building for x86 results in the following build errors: drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_init_lut': >> drivers/mtd/spi-nor/fsl-quadspi.c:355:21: error: 'SZ_16M' undeclared (first use in this function) if (q->nor_size <= SZ_16M) { ^ drivers/mtd/spi-nor/fsl-quadspi.c:355:21: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_read': >> drivers/mtd/spi-nor/fsl-quadspi.c:208:27: error: 'SZ_4M' undeclared (first use in this function) #define QUADSPI_MIN_IOMAP SZ_4M ^ >> drivers/mtd/spi-nor/fsl-quadspi.c:845:25: note: in expansion of macro 'QUADSPI_MIN_IOMAP' q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; Explicitly include <linux/sizes.h> to fix the problem. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-19mtd: fsl-quadspi: allow building for other ARCHes with COMPILE_TESTBrian Norris
This driver doesn't actually need ARCH_MXC to compile. Relax the constraints. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Han xu <han.xu@freescale.com>
2015-10-19mtd: fsl-quadspi: fix printk() format warning for size_tBrian Norris
Seen when compile-testing on non-32-bit arch: CC drivers/mtd/spi-nor/fsl-quadspi.o drivers/mtd/spi-nor/fsl-quadspi.c: In function 'fsl_qspi_read': drivers/mtd/spi-nor/fsl-quadspi.c:873:2: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat=] dev_dbg(q->dev, "cmd [%x],read from 0x%p, len:%d\n", ^ Also drop the '0x' prefixing to the '%p' formatter, since %p already knows how to format pointers appropriately. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Han xu <han.xu@freescale.com>
2015-10-19mtd: spi-nor: add DUAL_READ for w25q{32,64}dwBrian Norris
These flash support dual and quad read. Tested dual read on the 32 Mbit version. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: disable protection for Winbond flash at startupBrian Norris
In case the flash was locked at boot time. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: support lock/unlock/is_locked for WinbondBrian Norris
Many other flash share the same features as ST Micro. I've tested some Winbond flash, so add them. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: add mtd_is_locked() supportBrian Norris
This enables ioctl(MEMISLOCKED). Status can now be reported in the mtdinfo or flash_lock utilities found in mtd-utils. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: refactor block protection functionsBrian Norris
This code was a bit sloppy, would produce a lot of copy-and-paste, and did not always provide a sensible interface: * It didn't validate the length for LOCK and the offset for UNLOCK, so we were essentially discarding half of the user-supplied data and assuming what they wanted to lock/unlock * It didn't do very good error checking * It didn't make use of the fact that this operation works on power-of-two dimensions So, rewrite this to do proper bit arithmetic rather than a bunch of hard-coded condition tables. Now we have: * More comments on how this was derived * Notes on what is (and isn't) supported * A more exendible function, so we could add support for other protection ranges * More accurate locking - e.g., suppose the top quadrant is locked (75% to 100%); then in the following cases, case (a) will succeed but (b) will not (return -EINVAL): (a) user requests lock 3rd quadrant (50% to 75%) (b) user requests lock 3rd quadrant, minus a few blocks (e.g., 50% to 73%) Case (b) *should* fail, since we'd have to lock blocks that weren't requested. But the old implementation didn't know the difference and would lock the entire second half (50% to 100%) This refactoring work will also help enable the addition of mtd_is_locked() support and potentially the support of bottom boot protection (TB=1). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: use SNOR_MFR_* instead of CFI_MFR_*Brian Norris
No functional change, just cosmetic. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: Add support for s25fl004kSean Nyekjaer
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: spi-nor: s25fl204k supports dual I/0Sean Nyekjaer
Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: pass page number to ecc->write_xxx() methodsBoris BREZILLON
The ->read_xxx() methods are all passed the page number the NAND controller is supposed to read, but ->write_xxx() do not have such a parameter. This is a problem if we want to properly implement data scrambling/randomization in order to mitigate MLC sensibility to repeated pattern: to prevent bitflips in adjacent pages in the same block we need to avoid repeating the same pattern at the same offset in those pages, hence the randomizer/scrambler engine need to be passed the page value in order to adapt its seed accordingly. Moreover, adding the page parameter to the ->write_xxx() methods add some consistency to the current API. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Josh Wu <josh.wu@atmel.com> CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Huang Shijie <shijie.huang@arm.com> CC: Stefan Agner <stefan@agner.ch> CC: devel@driverdev.osuosl.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: nand: txx9ndfmc: show parent device in sysfsFrans Klaver
Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 07:05:10 +0000