aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)Author
2023-11-28net: dsa: lan9303: consequently nested-lock physical MDIOAlexander Sverdlin
commit 5a22fbcc10f3f7d94c5d88afbbffa240a3677057 upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25net: dsa: bcm_sf2: Fix possible memory leak in bcm_sf2_mdio_register()Jinjie Ruan
commit 61b40cefe51af005c72dbdcf975a3d166c6e6406 upstream. In bcm_sf2_mdio_register(), the class_find_device() will call get_device() to increment reference count for priv->master_mii_bus->dev if of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register() fails, it will call get_device() twice without decrement reference count for the device. And it is the same if bcm_sf2_mdio_register() succeeds but fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the reference count has not decremented to zero, the dev related resource will not be freed. So remove the get_device() in bcm_sf2_mdio_register(), and call put_device() if mdiobus_alloc() or mdiobus_register() fails and in bcm_sf2_mdio_unregister() to solve the issue. And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and just return 0 if it succeeds to make it cleaner. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-19net: dsa: qca8k: fix potential MDIO bus conflict when accessing internal ↵Marek Behún
PHYs via management frames [ Upstream commit 526c8ee04bdbd4d8d19a583b1f3b06700229a815 ] Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus also Micron ethernet PHY (dedicated to the WAN port). We've been experiencing a strange behavior of the WAN ethernet interface, wherein the WAN PHY started timing out the MDIO accesses, for example when the interface was brought down and then back up. Bisecting led to commit 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet"), which added support to access the QCA8337 switch's internal PHYs via management ethernet frames. Connecting the MDIO bus pins onto an oscilloscope, I was able to see that the MDIO bus was active whenever a request to read/write an internal PHY register was done via an management ethernet frame. My theory is that when the switch core always communicates with the internal PHYs via the MDIO bus, even when externally we request the access via ethernet. This MDIO bus is the same one via which the switch and internal PHYs are accessible to the board, and the board may have other devices connected on this bus. An ASCII illustration may give more insight: +---------+ +----| | | | WAN PHY | | +--| | | | +---------+ | | | | +----------------------------------+ | | | QCA8337 | MDC | | | +-------+ | ------o-+--|--------o------------o--| | | MDIO | | | | | PHY 1 |-|--to RJ45 --------o--|---o----+---------o--+--| | | | | | | | +-------+ | | +-------------+ | o--| | | | | MDIO MDC | | | | PHY 2 |-|--to RJ45 eth1 | | | o--+--| | | -----------|-|port0 | | | +-------+ | | | | | o--| | | | | switch core | | | | PHY 3 |-|--to RJ45 | +-------------+ o--+--| | | | | | +-------+ | | | o--| ... | | +----------------------------------+ When we send a request to read an internal PHY register via an ethernet management frame via eth1, the switch core receives the ethernet frame on port 0 and then communicates with the internal PHY via MDIO. At this time, other potential devices, such as the WAN PHY on Turris 1.x, cannot use the MDIO bus, since it may cause a bus conflict. Fix this issue by locking the MDIO bus even when we are accessing the PHY registers via ethernet management frames. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absentFabio Estevam
[ Upstream commit 6ccf50d4d4741e064ba35511a95402c63bbe21a8 ] Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: block FDB accesses that are concurrent with a switch resetVladimir Oltean
[ Upstream commit 86899e9e1e29e854b5f6dcc24ba4f75f792c89aa ] Currently, when we add the first sja1105 port to a bridge with vlan_filtering 1, then we sometimes see this output: sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2 It is because sja1105_fdb_add() runs from the dsa_owq which is no longer serialized with switch resets since it dropped the rtnl_lock() in the blamed commit. Either performing the FDB accesses before the reset, or after the reset, is equally fine, because sja1105_static_fdb_change() backs up those changes in the static config, but FDB access during reset isn't ok. Make sja1105_static_config_reload() take the fdb_lock to fix that. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: serialize sja1105_port_mcast_flood() with other FDB accessesVladimir Oltean
[ Upstream commit ea32690daf4fa525dc5a4d164bd00ed8c756e1c6 ] sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood() runs from switchdev_deferred_process_work(). Prior to the blamed commit, they used to be indirectly serialized through the rtnl_lock(), which no longer holds true because dsa_owq dropped that. So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP elements concurrently compared to when we change them, in sja1105_static_fdb_change(). That is not ideal, since it might result in data corruption. Introduce a mutex which serializes accesses to the hardware FDB and to the static config elements for the L2 Address Lookup table. I can't find a good reason to add locking around sja1105_fdb_dump(). I'll add it later if needed. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: fix multicast forwarding working only for last added mdb ↵Vladimir Oltean
entry [ Upstream commit 7cef293b9a634a05fcce9e1df4aee3aeed023345 ] The commit cited in Fixes: did 2 things: it refactored the read-back polling from sja1105_dynamic_config_read() into a new function, sja1105_dynamic_config_wait_complete(), and it called that from sja1105_dynamic_config_write() too. What is problematic is the refactoring. The refactored code from sja1105_dynamic_config_poll_valid() works like the previous one, but the problem is that it uses another packed_buf[] SPI buffer, and there was code at the end of sja1105_dynamic_config_read() which was relying on the read-back packed_buf[]: /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. */ if (entry) ops->entry_packing(packed_buf, entry, UNPACK); After the change, the packed_buf[] that this code sees is no longer the entry read back from hardware, but the original entry that the caller passed to the sja1105_dynamic_config_read(), packed into this buffer. This difference is the most notable with the SJA1105_SEARCH uses from sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic added by commit 728db843df88 ("net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address") to figure out whether the address we're trying to add matches on any existing hardware entry, with the exception of the catch-all multicast address. That logic was broken, because with sja1105_dynamic_config_read() not working properly, it doesn't return us the entry read back from hardware, but the entry that we passed to it. And, since for multicast, a match will always exist, it will tell us that any mdb entry already exists at index=0 L2 Address Lookup table. It is index=0 because the caller doesn't know the index - it wants to find it out, and sja1105_dynamic_config_read() does: if (index < 0) { // SJA1105_SEARCH /* Avoid copying a signed negative number to an u64 */ cmd.index = 0; // <- this cmd.search = true; } else { cmd.index = index; cmd.search = false; } So, to the caller of sja1105_dynamic_config_read(), the returned info looks entirely legit, and it will add all mdb entries to FDB index 0. There, they will always overwrite each other (not to mention, potentially they can also overwrite a pre-existing bridge fdb entry), and the user-visible impact will be that only the last mdb entry will be forwarded as it should. The others won't (will be flooded or dropped, depending on the egress flood settings). Fixing is a bit more complicated, and involves either passing the same packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all the extra processing on the packed_buf[] to sja1105_dynamic_config_wait_complete(). I've opted for the latter, because it makes sja1105_dynamic_config_wait_complete() a bit more self-contained. Fixes: df405910ab9f ("net: dsa: sja1105: wait for dynamic config command completion on writes too") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: propagate exact error code from ↵Vladimir Oltean
sja1105_dynamic_config_poll_valid() [ Upstream commit c956798062b5a308db96e75157747291197f0378 ] Currently, sja1105_dynamic_config_wait_complete() returns either 0 or -ETIMEDOUT, because it just looks at the read_poll_timeout() return code. There will be future changes which move some more checks to sja1105_dynamic_config_poll_valid(). It is important that we propagate their exact return code (-ENOENT, -EINVAL), because callers of sja1105_dynamic_config_read() depend on them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 7cef293b9a63 ("net: dsa: sja1105: fix multicast forwarding working only for last added mdb entry") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: hide all multicast addresses from "bridge fdb show"Vladimir Oltean
[ Upstream commit 02c652f5465011126152bbd93b6a582a1d0c32f1 ] Commit 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") has partially hidden some multicast entries from showing up in the "bridge fdb show" output, but it wasn't enough. Addresses which are added through "bridge mdb add" still show up. Hide them all. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: complete tc-cbs offload support on SJA1110Vladimir Oltean
[ Upstream commit 180a7419fe4adc8d9c8e0ef0fd17bcdd0cf78acd ] The blamed commit left this delta behind: struct sja1105_cbs_entry { - u64 port; - u64 prio; + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ u64 credit_hi; u64 credit_lo; u64 send_slope; u64 idle_slope; }; but did not actually implement tc-cbs offload fully for the new switch. The offload is accepted, but it doesn't work. The difference compared to earlier switch generations is that now, the table of CBS shapers is sparse, because there are many more shapers, so the mapping between a {port, prio} and a table index is static, rather than requiring us to store the port and prio into the sja1105_cbs_entry. So, the problem is that the code programs the CBS shaper parameters at a dynamic table index which is incorrect. All that needs to be done for SJA1110 CBS shapers to work is to bypass the logic which allocates shapers in a dense manner, as for SJA1105, and use the fixed mapping instead. Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many timesVladimir Oltean
[ Upstream commit 894cafc5c62ccced758077bd4e970dc714c42637 ] After running command [2] too many times in a row: [1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 [2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \ idleslope 120000 sendslope -880000 locredit -1320 hicredit 180 (aka more than priv->info->num_cbs_shapers times) we start seeing the following error message: Error: Specified device failed to setup cbs hardware offload. This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents the same API for the qdisc create and replace cases, and the sja1105 driver fails to distinguish between the 2. Thus, it always thinks that it must allocate the same shaper for a {port, queue} pair, when it may instead have to replace an existing one. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offloadVladimir Oltean
[ Upstream commit 954ad9bf13c4f95a4958b5f8433301f2ab99e1f5 ] More careful measurement of the tc-cbs bandwidth shows that the stream bandwidth (effectively idleslope) increases, there is a larger and larger discrepancy between the rate limit obtained by the software Qdisc, and the rate limit obtained by its offloaded counterpart. The discrepancy becomes so large, that e.g. at an idleslope of 40000 (40Mbps), the offloaded cbs does not actually rate limit anything, and traffic will pass at line rate through a 100 Mbps port. The reason for the discrepancy is that the hardware documentation I've been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which the credit counter is increased". Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf (for SJA1110), the wording is different: "This field specifies the value, in bytes per second times link speed, by which the credit counter is increased". So there's an extra scaling for link speed that the driver is currently not accounting for, and apparently (empirically), that link speed is expressed in Kbps. I've pondered whether to pollute the sja1105_mac_link_up() implementation with CBS shaper reprogramming, but I don't think it is worth it. IMO, the UAPI exposed by tc-cbs requires user space to recalculate the sendslope anyway, since the formula for that depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. So we use the offload->sendslope and offload->idleslope to deduce the original port_transmit_rate from the CBS formula, and use that value to scale the offload->sendslope and offload->idleslope to values that the hardware understands. Some numerical data points: 40Mbps stream, max interfering frame size 1500, port speed 100M --------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -60000 locredit -900 hicredit 600 which result in hardware values: Before (doesn't work) After (works) credit_hi 600 600 credit_lo 900 900 send_slope 7500000 75 idle_slope 5000000 50 40Mbps stream, max interfering frame size 1500, port speed 1G ------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -960000 locredit -1440 hicredit 60 which result in hardware values: Before (doesn't work) After (works) credit_hi 60 60 credit_lo 1440 1440 send_slope 120000000 120 idle_slope 5000000 5 5.12Mbps stream, max interfering frame size 1522, port speed 100M ----------------------------------------------------------------- tc-cbs parameters: idleslope 5120 sendslope -94880 locredit -1444 hicredit 77 which result in hardware values: Before (doesn't work) After (works) credit_hi 77 77 credit_lo 1444 1444 send_slope 11860000 118 idle_slope 640000 6 Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundariesLukasz Majewski
[ Upstream commit 8d7ae22ae9f8c8a4407f8e993df64440bdbd0cee ] The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30net: dsa: mt7530: fix handling of 802.1X PAE framesArınç ÜNAL
[ Upstream commit e94b590abfff2cdbf0bdaa7d9904364c8d480af5 ] 802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30net: dsa: felix: fix oversize frame dropping for always closed tc-taprio gatesVladimir Oltean
[ Upstream commit d44036cad31170da0cb9c728e80743f84267da6e ] The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23net: dsa: mv88e6xxx: Wait for EEPROM done before HW resetAlfred Lee
[ Upstream commit 23d775f12dcd23d052a4927195f15e970e27ab26 ] If the switch is reset during active EEPROM transactions, as in just after an SoC reset after power up, the I2C bus transaction may be cut short leaving the EEPROM internal I2C state machine in the wrong state. When the switch is reset again, the bad state machine state may result in data being read from the wrong memory location causing the switch to enter unexpected mode rendering it inoperational. Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by: Alfred Lee <l00g33k@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-16net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on ↵Vladimir Oltean
driver remove commit a94c16a2fda010866b8858a386a8bfbeba4f72c5 upstream. When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11net: dsa: fix value check in bcm_sf2_sw_probe()Yuanjun Gong
[ Upstream commit dadc5b86cc9459581f37fe755b431adc399ea393 ] in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi
commit dfd739f182b00b02bd7470ed94d112684cc04fa2 upstream. The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03net: dsa: qca8k: fix broken search_and_delChristian Marangi
commit ae70dcb9d9ecaf7d9836d3e1b5bef654d7ef5680 upstream. On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi
commit 80248d4160894d7e40b04111bdbaa4ff93fc4bd7 upstream. On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27net: dsa: microchip: correct KSZ8795 static MAC table accessTristram Ha
[ Upstream commit 4bdf79d686b49ac49373b36466acfb93972c7d7c ] The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: dsa: microchip: ksz8_r_sta_mac_table(): Avoid using error code for ↵Oleksij Rempel
empty entries [ Upstream commit 559901b46810e82ba5321a5e789f994b65d3bc3d ] Prepare for the next patch by ensuring that ksz8_r_sta_mac_table() does not use error codes for empty entries. This change will enable better handling of read/write errors in the upcoming patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: dsa: microchip: ksz8: Make ksz8_r_sta_mac_table() staticOleksij Rempel
[ Upstream commit b5751cdd7dbe618a03951bdd4c982a71ba448b1b ] As ksz8_r_sta_mac_table() is only used within ksz8795.c, there is no need to export it. Make the function static for better encapsulation. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27net: dsa: microchip: ksz8: Separate static MAC table operations for code reuseOleksij Rempel
[ Upstream commit f6636ff69ec4f2c94a5ee1d032b21cfe1e0a5678 ] Move static MAC table operations to separate functions in order to reuse the code for add/del_fdb. This is needed to address kernel warnings caused by the lack of fdb add function support in the current driver. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 4bdf79d686b4 ("net: dsa: microchip: correct KSZ8795 static MAC table access") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27dsa: mv88e6xxx: Do a final check before timing outLinus Walleij
[ Upstream commit 95ce158b6c93b28842b54b42ad1cb221b9844062 ] I get sporadic timeouts from the driver when using the MV88E6352. Reading the status again after the loop fixes the problem: the operation is successful but goes undetected. Some added prints show things like this: [ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1b reg 0b, mask 8000, val 0000, data c000 [ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for ATU op 4000, fid 0001 (...) [ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1c reg 18, mask 8000, val 0000, data 9860 [ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting for PHY command 1860 to complete The reason is probably not the commands: I think those are mostly fine with the 50+50ms timeout, but the problem appears when OpenWrt brings up several interfaces in parallel on a system with 7 populated ports: if one of them take more than 50 ms and waits one or more of the others can get stuck on the mutex for the switch and then this can easily multiply. As we sleep and wait, the function loop needs a final check after exiting the loop if we were successful. Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23net: dsa: qca8k: Add check for skb_copyJiasheng Jiang
[ Upstream commit 87355b7c3da9bfd81935caba0ab763355147f7b0 ] Add check for the return value of skb_copy in order to avoid NULL pointer dereference. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: dsa: sja1105: always enable the send_meta optionsVladimir Oltean
[ Upstream commit a372d66af48506d9f7aaae2a474cd18f14d98cb8 ] incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless PTP RX timestamping is enabled. The incl_srcpt option was initially unconditionally enabled, then that changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that it now needs to be always enabled, otherwise the driver does not have a reliable source of information regarding source_port and switch_id for link-local traffic (tag_8021q VLANs may be imprecise since now they identify an entire bridging domain when ports are not standalone). If we accept that PTP RX timestamping (and therefore, meta frame generation) is always enabled in hardware, then that limitation could be avoided and packets with any MAC DA can be properly received, because meta frames do contain the original bytes from the MAC DA of their associated link-local packet. This change enables meta frame generation unconditionally, which also has the nice side effects of simplifying the switch control path (a switch reset is no longer required on hwtstamping settings change) and the tagger data path (it no longer needs to be informed whether to expect meta frames or not - it always does). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: dsa: vsc73xx: fix MTU configurationPawel Dembicki
[ Upstream commit 3cf62c8177adb0db9e15c8b898c44f997acf3ebf ] Switch in MAXLEN register stores the maximum size of a data frame. The MTU size is 18 bytes smaller than the frame size. The current settings are causing problems with packet forwarding. This patch fixes the MTU settings to proper values. Fixes: fb77ffc6ec86 ("net: dsa: vsc73xx: make the MTU configurable") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: dsa: sja1105: always enable the INCL_SRCPT optionVladimir Oltean
[ Upstream commit b4638af8885af93cd70351081da1909c59342440 ] Link-local traffic on bridged SJA1105 ports is sometimes tagged by the hardware with source port information (when the port is under a VLAN aware bridge). The tag_8021q source port identification has become more loose ("imprecise") and will report a plausible rather than exact bridge port, when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local traffic always needs to know the precise source port. Modify the driver logic (and therefore: the tagging protocol itself) to always include the source port information with link-local packets, regardless of whether the port is standalone, under a VLAN-aware or VLAN-unaware bridge. This makes it possible for the tagging driver to give priority to that information over the tag_8021q VLAN header. The big drawback with INCL_SRCPT is that it makes it impossible to distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and 01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4 with zeroes. Only if PTP RX timestamping is enabled, the switch will generate a META follow-up frame containing the RX timestamp and the original bytes 3 and 4 of the MAC DA. Those will be used to patch up the original packet. Nonetheless, in the absence of PTP RX timestamping, we have to live with this limitation, since it is more important to have the more precise source port information for link-local traffic. Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID") Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19net: dsa: felix: don't drop PTP frames with tag_8021q when RX timestamping ↵Vladimir Oltean
is disabled [ Upstream commit 2edcfcbb3c5946609be1d8875473a240b170673b ] The driver implements a workaround for the fact that it doesn't have an IRQ source to tell it whether PTP frames are available through the extraction registers, for those frames to be processed and passed towards the network stack. That workaround is to configure the switch, through felix_hwtstamp_set() -> felix_update_trapping_destinations(), to create two copies of PTP packets: one sent over Ethernet to the DSA master, and one to be consumed through the aforementioned CPU extraction queue registers. The reason why we want PTP packets to be consumed through the CPU extraction registers in the first place is because we want to see their hardware RX timestamp. With tag_8021q, that is only visible that way, and it isn't visible with the copy of the packet that's transmitted over Ethernet. The problem with the workaround implementation is that it drops the packet received over Ethernet, in expectation of its copy being present in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't run (aka PTP RX timestamping is disabled), the driver will drop the original PTP frame and there will be no copy of it in the CPU extraction registers. So, the network stack will simply not see any PTP frame. Look at the port's trapping configuration to see whether the driver has previously enabled the CPU extraction registers. If it hasn't, just don't RX timestamp the frame and let it be passed up the stack by DSA, which is perfectly fine. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28net: dsa: mt7530: fix handling of LLDP framesArınç ÜNAL
[ Upstream commit 8332cf6fd7c7087dbc2067115b33979c9851bbc4 ] LLDP frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat LLDP frames as regular multicast frames, therefore flooding them to user ports. To fix this, set LLDP frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28net: dsa: mt7530: fix handling of BPDUs on MT7530 switchArınç ÜNAL
[ Upstream commit d7c66073559386b836bded7cdc8b66ee5c049129 ] BPDUs are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT7530 switch treats BPDUs as regular multicast frames, therefore flooding them to user ports. To fix this, set BPDUs to be trapped to the CPU port. Group this on mt7530_setup() and mt7531_setup_common() into mt753x_trap_frames() and call that. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switchArınç ÜNAL
[ Upstream commit 4ae90f90e4909e3014e2dc6a0627964617a7b824 ] All MT7530 switch IP variants share the MT7530_MFC register, but the current driver only writes it for the switch variant that is integrated in the MT7621 SoC. Modify the code to include all MT7530 derivatives. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo framesVladimir Oltean
[ Upstream commit 6ac7a27a8b07588497ed53dfd885df9c72bc67e0 ] The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methodsAlexander Sverdlin
[ Upstream commit 5a59a58ec25d44f853c26bdbfda47d73b3067435 ] LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1]. Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement. Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95 [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09net: dsa: mv88e6xxx: Increase wait after reset deactivationAndreas Svensson
[ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ] A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by: Andreas Svensson <andreas.svensson@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30net: dsa: mv88e6xxx: Add RGMII delay to 88E6320Steffen Bätz
commit 91e87045a5ef6f7003e9a2cb7dfa435b9b002dbe upstream. Currently, the .port_set_rgmii_delay hook is missing for the 88E6320 family, which causes failure to retrieve an IP address via DHCP. Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII delay for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode. Tested on a custom i.MX8MN board connected to an 88E6320 switch. This change also applies safely to the 88E6321 variant. The only difference between 88E6320 versus 88E6321 is the temperature grade and pinout. They share exactly the same MDIO register map for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode. Signed-off-by: Steffen Bätz <steffen@innosonix.de> [fabio: Improved commit log and extended it to mv88e6321_ops] Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221028163158.198108-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offsetMarco Migliore
[ Upstream commit 1323e0c6e1d7e103d59384c3ac50f72b17a6936c ] According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24net: dsa: rzn1-a5psw: disable learning for standalone portsClément Léger
[ Upstream commit ec52b69c046a6219011af780aca155a96719637b ] When ports are in standalone mode, they should have learning disabled to avoid adding new entries in the MAC lookup table which might be used by other bridge ports to forward packets. While adding that, also make sure learning is enabled for CPU port. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24net: dsa: rzn1-a5psw: fix STP states handlingAlexis Lothoré
[ Upstream commit ebe9bc50952757b4b25eaf514da7c464196c9606 ] stp_set_state() should actually allow receiving BPDU while in LEARNING mode which is not the case. Additionally, the BLOCKEN bit does not actually forbid sending forwarded frames from that port. To fix this, add a5psw_port_tx_enable() function which allows to disable TX. However, while its name suggest that TX is totally disabled, it is not and can still allow to send BPDUs even if disabled. This can be done by using forced forwarding with the switch tagging mechanism but keeping "filtering" disabled (which is already the case in the rzn1-a5sw tag driver). With these fixes, STP support is now functional. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24net: dsa: rzn1-a5psw: enable management frames for CPU portClément Léger
[ Upstream commit 9e4b45f20c5aac786c728619e5ee746bffce1798 ] Currently, management frame were discarded before reaching the CPU port due to a misconfiguration of the MGMT_CONFIG register. Enable them by setting the correct value in this register in order to correctly receive management frame and handle STP. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17net: dsa: mt7530: fix network connectivity with multiple CPU portsArınç ÜNAL
[ Upstream commit 120a56b01beed51ab5956a734adcfd2760307107 ] On mt753x_cpu_port_enable() there's code that enables flooding for the CPU port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports are enabled, port 6 becomes the only port to forward the frames to. But port 5 is the active port, so no frames received from the user ports will be forwarded to port 5 which breaks network connectivity. Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix this issue by setting the bit that corresponds to the CPU port without overwriting the other bits. Clear the bits beforehand only for the MT7531 switch. According to the documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and UNU_FFP bits are set to 1 for MT7531, 0 for MT7530. The commit 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") silently changed the method to set the bits on the MT7530_MFC. Instead of clearing the relevant bits before mt7530_cpu_port_enable() which runs under a for loop, the commit started doing it on mt7530_cpu_port_enable(). Back then, this didn't really matter as only a single CPU port could be used since the CPU port number was hardcoded. The driver was later changed with commit 1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp instead of constant") to retrieve the CPU port via dp->cpu_dp. With that, this silent change became an issue for when using multiple CPU ports. Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17net: dsa: mt7530: split-off common parts from mt7531_setupDaniel Golle
[ Upstream commit 7f54cc9772ced2d76ac11832f0ada43798443ac9 ] MT7988 shares a significant part of the setup function with MT7531. Split-off those parts into a shared function which is going to be used also by mt7988_setup. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 120a56b01bee ("net: dsa: mt7530: fix network connectivity with multiple CPU ports") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621Arınç ÜNAL
[ Upstream commit 37c218d8021e36e226add4bab93d071d30fe0704 ] The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpuAngelo Dureghello
[ Upstream commit 6686317855c6997671982d4489ccdd946f644957 ] Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu processing. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Fixes: 51c901a775621 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11net: dsa: qca8k: remove assignment of an_enabled in pcs_get_state()Russell King (Oracle)
[ Upstream commit 9ef70d0130f282638b28cfce24222f71ada00c9c ] pcs_get_state() implementations are not supposed to alter an_enabled. Remove this assignment. Fixes: b3591c2a3661 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1pdsE5-00Dl2l-8F@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26net: dsa: b53: mmap: add phy opsÁlvaro Fernández Rojas
[ Upstream commit 45977e58ce65ed0459edc9a0466d9dfea09463f5 ] Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13net: dsa: mv88e6xxx: Reset mv88e6393x force WD event bitGustav Ekelund
[ Upstream commit 089b91a0155c4de1209a07ff2a7dd299ff3ece47 ] The force watchdog event bit is not cleared during SW reset in the mv88e6393x switch. This is a different behavior compared to mv886390 which clears the force WD event bit as advertised. This causes a force WD event to be handled over and over again as the SW reset following the event never clears the force WD event bit. Explicitly clear the watchdog event register to 0 in irq_action when handling an event to prevent the switch from sending continuous interrupts. Marvell aren't aware of any other stuck bits apart from the force WD bit. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family" Signed-off-by: Gustav Ekelund <gustaek@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06net: dsa: mv88e6xxx: replace VTU violation prints with trace pointsVladimir Oltean
commit 9e3d9ae52b5657399a7b61258cc7482434a911bb upstream. It is possible to trigger these VTU violation messages very easily, it's only necessary to send packets with an unknown VLAN ID to a port that belongs to a VLAN-aware bridge. Do a similar thing as for ATU violation messages, and hide them in the kernel's trace buffer. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_vtu_miss_violation mv88e6xxx:mv88e6xxx_vtu_member_violation $ trace-cmd report Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 14:39:13 +0000