aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio
AgeCommit message (Collapse)Author
2021-09-07Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-07cxgb3: fix oops on module removalHeiner Kallweit
When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b8928927f ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04ethtool: Fix an error code in cxgb2.cYang Li
When adapter->registered_device_map is NULL, the value of err is uncertain, we set err to -EINVAL to avoid ambiguity. Clean up smatch warning: drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing error code 'err' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31cxgb4: Use pci_vpd_find_id_string() to find VPD ID stringHeiner Kallweit
Use pci_vpd_find_id_string() to find the VPD ID string. This simplifies the code and avoids the need for pci_vpd_lrdt_size(). Link: https://lore.kernel.org/r/19ea2e9b-6e94-288a-6612-88db01b1b417@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26cxgb4: dont touch blocked freelist bitmap after freeRahul Lakkireddy
When adapter init fails, the blocked freelist bitmap is already freed up and should not be touched. So, move the bitmap zeroing closer to where it was successfully allocated. Also handle adapter init failure unwind path immediately and avoid setting up RDMA memory windows. Fixes: 5b377d114f2b ("cxgb4: Add debugfs facility to inject FL starvation") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25cxgb4: Properly revert VPD changesNathan Chancellor
Clang warns: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2785:2: error: variable 'kw_offset' is uninitialized when used here [-Werror,-Wuninitialized] FIND_VPD_KW(i, "RV"); ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2776:39: note: expanded from macro 'FIND_VPD_KW' var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \ ^~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2748:34: note: initialize the variable 'kw_offset' to silence this warning unsigned int vpdr_len, kw_offset, id_len; ^ = 0 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2785:2: error: variable 'vpdr_len' is uninitialized when used here [-Werror,-Wuninitialized] FIND_VPD_KW(i, "RV"); ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2776:50: note: expanded from macro 'FIND_VPD_KW' var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \ ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2748:23: note: initialize the variable 'vpdr_len' to silence this warning unsigned int vpdr_len, kw_offset, id_len; ^ = 0 2 errors generated. The series "PCI/VPD: Convert more users to the new VPD API functions" was applied to net-next when it should have been applied to the PCI tree because of build errors. However, commit 82e34c8a9bdf ("Revert "Revert "cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()""") reapplied a change, resulting in the warning above. Properly revert commit 8d63ee602da3 ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()") to fix the warning and restore proper functionality. This also reverts commit 3a93bedea050 ("cxgb4: Remove unused vpd_param member ec") to avoid future merge conflicts, as that change has been applied to the PCI tree. Link: https://lore.kernel.org/r/20210823120929.7c6f7a4f@canb.auug.org.au/ Link: https://lore.kernel.org/r/1ca29408-7bc7-4da5-59c7-87893c9e0442@gmail.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Link: https://lore.kernel.org/r/db576a3e-e877-b37b-98ed-cfc03d225ab3@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24cxgb4: Remove unused vpd_param member ecHeiner Kallweit
Member ec isn't used, so remove it. Link: https://lore.kernel.org/r/30648e95-bfb9-9af3-0c8f-dd3e34df8b6b@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24cxgb4: Validate VPD checksum with pci_vpd_check_csum()Heiner Kallweit
Validate the VPD checksum with pci_vpd_check_csum() to simplify the code. Link: https://lore.kernel.org/r/70404ece-0036-c0ce-f824-f5637e54115e@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24cxgb4: improve printing NIC informationHeiner Kallweit
Currently the interface name and PCI address are printed twice, because netdev_info() is printing this information implicitly already. This results in messages like the following. remove the duplicated information. cxgb4 0000:81:00.4 eth3: eth3: Chelsio T6225-OCP-SO (0000:81:00.4) 1G/10G/25GBASE-SFP28 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: chelsio: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23Revert "cxgb4: Validate VPD checksum with pci_vpd_check_csum()"David S. Miller
This reverts commit 96ce96f151261e33a170cecb8a4fa664b45743ab. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23Revert "Revert "cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()""David S. Miller
This reverts commit df6deaf6731519c6efd68ccd0638564e1afc4309. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23Revert "cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()"David S. Miller
This reverts commit 8d63ee602da381c437c0a4ef7ea882b71d829eb6. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()Heiner Kallweit
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22cxgb4: Remove unused vpd_param member ecHeiner Kallweit
Member ec isn't used, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22cxgb4: Validate VPD checksum with pci_vpd_check_csum()Heiner Kallweit
Validate the VPD checksum with pci_vpd_check_csum() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02cxgb4: make the array match_all_mac static, makes object smallerColin Ian King
Don't populate the array match_all_mac on the stack but instead it static const. Makes the object code smaller by 75 bytes. Before: text data bss dec hex filename 46701 8960 64 55725 d9ad ../chelsio/cxgb4/cxgb4_filter.o After: text data bss dec hex filename 46338 9120 192 55650 d962 ../chelsio/cxgb4/cxgb4_filter.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801151205.145924-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27cxgb3: use ndo_siocdevprivateArnd Bergmann
cxgb3 has a private multiplexor that works correctly in compat mode, split out the siocdevprivate callback from do_ioctl for simplification. Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08cxgb4: fix IRQ free race during driver unloadShahjada Abul Husain
IRQs are requested during driver's ndo_open() and then later freed up in disable_interrupts() during driver unload. A race exists where driver can set the CXGB4_FULL_INIT_DONE flag in ndo_open() after the disable_interrupts() in driver unload path checks it, and hence misses calling free_irq(). Fix by unregistering netdevice first and sync with driver's ndo_open(). This ensures disable_interrupts() checks the flag correctly and frees up the IRQs properly. Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-18cxgb4: fix wrong shift.Pavel Machek
While fixing coverity warning, commit dd2c79677375 introduced typo in shift value. Fix that. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: chelsio: cxgb4: use eth_zero_addr() to assign zero addressYang Yingliang
Using eth_zero_addr() to assign zero address insetad of inefficient copy from an array. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14cxgb4: fix wrong ethtool n-tuple rule lookupRahul Lakkireddy
The TID returned during successful filter creation is relative to the region in which the filter is created. Using it directly always returns Hi Prio/Normal filter region's entry for the first couple of entries, even though the rule is actually inserted in Hash region. Fix by analyzing in which region the filter has been inserted and save the absolute TID to be used for lookup later. Fixes: db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11cxgb4: halt chip before flashing PHY firmware imageRahul Lakkireddy
When using firmware-assisted PHY firmware image write to flash, halt the chip before beginning the flash write operation to allow the running firmware to store the image persistently. Otherwise, the running firmware will only store the PHY image in local on-chip RAM, which will be lost after next reset. Fixes: 4ee339e1e92a ("cxgb4: add support to flash PHY image") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11cxgb4: fix sleep in atomic when flashing PHY firmwareRahul Lakkireddy
Before writing new PHY firmware to on-chip memory, driver queries firmware for current running PHY firmware version, which can result in sleep waiting for reply. So, move spinlock closer to the actual on-chip memory write operation, instead of taking it at the callers. Fixes: 5fff701c838e ("cxgb4: always sync access when flashing PHY firmware") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11cxgb4: fix endianness when flashing boot imageRahul Lakkireddy
Boot images are copied to memory and updated with current underlying device ID before flashing them to adapter. Ensure the updated images are always flashed in Big Endian to allow the firmware to read the new images during boot properly. Fixes: 550883558f17 ("cxgb4: add support to flash boot image") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04net:cxgb3: fix incorrect work cancellationÍñigo Huguet
In my last changes in commit 5e0b8928927f I introduced a copy-paste bug, leading to cancel twice qresume_task work for OFLD queue, and never the one for CTRL queue. This patch cancels correctly both works. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04cxgb4: avoid link re-train during TC-MQPRIO configurationRahul Lakkireddy
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03cxgb4: fix regression with HASH tc prio value updateRahul Lakkireddy
commit db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion") has moved searching for next highest priority HASH filter rule to cxgb4_flow_rule_destroy(), which searches the rhashtable before the the rule is removed from it and hence always finds at least 1 entry. Fix by removing the rule from rhashtable first before calling cxgb4_flow_rule_destroy() and hence avoid fetching stale info. Fixes: db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net:cxgb3: fix code style issuesÍñigo Huguet
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03net:cxgb3: replace tasklets with worksÍñigo Huguet
OFLD and CTRL TX queues can be stopped if there is no room in their DMA rings. If this happens, they're tried to be restarted later after having made some room in the corresponding ring. The tasks of restarting these queues were triggered using tasklets, but they can be replaced for workqueue works, getting them out of softirq context. This queues stop/restart probably doesn't happen often and they can be quite lengthy because they try to send all pending skbs. Moreover, given that probably the ring is not empty yet, so the DMA still has work to do, we don't need to be so fast to justify using tasklets/softirq instead of running in a thread. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01cxgb4: Fix -Wunused-const-variable warningYueHaibing
If CONFIG_PCI_IOV is n, make W=1 warns: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3909:33: warning: ‘cxgb4_mgmt_ethtool_ops’ defined but not used [-Wunused-const-variable=] static const struct ethtool_ops cxgb4_mgmt_ethtool_ops = { ^~~~~~~~~~~~~~~~~~~~~~ Move it into #ifdef block to fix this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-19cxgb4: avoid accessing registers when clearing filtersRaju Rangoju
Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters. Fixes: b1a79360ee86 ("cxgb4: Delete all hash and TCAM filters before resource cleanup") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: chelsio: remove leading spaces before tabsHui Tang
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18cxgb4: clip_tbl: use list_del_init instead of list_del/INIT_LIST_HEADYang Yingliang
Using list_del_init() instead of list_del() + INIT_LIST_HEAD() to simpify the code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: chelsio: cxgb4vf: Fix wrong function name in commentsYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb4vf/sge.c:966: warning: expecting prototype for check_ring_tx_db(). Prototype was for ring_tx_db() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: chelsio: cxgb4: Fix wrong function name in commentsYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: chelsio: cxgb3: Fix wrong function name in commentsYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb3/sge.c:677: warning: expecting prototype for free_qset(). Prototype was for t3_free_qset() instead drivers/net/ethernet/chelsio/cxgb3/sge.c:1266: warning: expecting prototype for eth_xmit(). Prototype was for t3_eth_xmit() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13cxgb4/ch_ktls: Clear resources when pf4 device is removedAyush Sawal
This patch maintain the list of active tids and clear all the active connection resources when DETACH notification comes. Fixes: a8c16e8ed624f ("crypto/chcr: move nic TLS functionality to drivers/net") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12chelsio/chtls: unlock on error in chtls_pt_recvmsg()Dan Carpenter
This error path needs to release some memory and call release_sock(sk); before returning. Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-08Merge tag 'net-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ...
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-02 03:56:08 +0000