aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/macsec.c
AgeCommit message (Collapse)Author
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.changelinkMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04macsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22macsec: double accounting of dropped rx/tx packetsGirish Moodalbail
The macsec implementation shouldn't account for rx/tx packets that are dropped in the netdev framework. The netdev framework itself accounts for such packets by atomically updating struct net_device`rx_dropped and struct net_device`tx_dropped fields. Later on when the stats for macsec link is retrieved, the packets dropped in netdev framework will be included in dev_get_stats() after calling macsec.c`macsec_get_stats64() Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26macsec: dynamically allocate space for sglistJason A. Donenfeld
We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24macsec: avoid heap overflow in skb_to_sgvecJason A. Donenfeld
While this may appear as a humdrum one line change, it's actually quite important. An sk_buff stores data in three places: 1. A linear chunk of allocated memory in skb->data. This is the easiest one to work with, but it precludes using scatterdata since the memory must be linear. 2. The array skb_shinfo(skb)->frags, which is of maximum length MAX_SKB_FRAGS. This is nice for scattergather, since these fragments can point to different pages. 3. skb_shinfo(skb)->frag_list, which is a pointer to another sk_buff, which in turn can have data in either (1) or (2). The first two are rather easy to deal with, since they're of a fixed maximum length, while the third one is not, since there can be potentially limitless chains of fragments. Fortunately dealing with frag_list is opt-in for drivers, so drivers don't actually have to deal with this mess. For whatever reason, macsec decided it wanted pain, and so it explicitly specified NETIF_F_FRAGLIST. Because dealing with (1), (2), and (3) is insane, most users of sk_buff doing any sort of crypto or paging operation calls a convenient function called skb_to_sgvec (which happens to be recursive if (3) is in use!). This takes a sk_buff as input, and writes into its output pointer an array of scattergather list items. Sometimes people like to declare a fixed size scattergather list on the stack; othertimes people like to allocate a fixed size scattergather list on the heap. However, if you're doing it in a fixed-size fashion, you really shouldn't be using NETIF_F_FRAGLIST too (unless you're also ensuring the sk_buff and its frag_list children arent't shared and then you check the number of fragments in total required.) Macsec specifically does this: size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); tmp = kmalloc(size, GFP_ATOMIC); *sg = (struct scatterlist *)(tmp + sg_offset); ... sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); Specifying MAX_SKB_FRAGS + 1 is the right answer usually, but not if you're using NETIF_F_FRAGLIST, in which case the call to skb_to_sgvec will overflow the heap, and disaster ensues. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21macsec: fix validation failed in asynchronous operation.Lee Ryder
MACSec test failed when asynchronous crypto operations is used. It encounters packet validation failed since macsec_skb_cb(skb)->valid is always 'false'. This patch adds missing "macsec_skb_cb(skb)->valid = true" in macsec_decrypt_done() when "err == 0". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08macsec: remove first zero and add attribute name in commentsZhang Shengju
Remove first zero for add, and use full attribute name in comments. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27macsec: Fix header length if SCI is added if explicitly disabledTobias Brunner
Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in core net infraJarod Wilson
geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09macsec: set network devtypestephen hemminger
The netdevice type structure for macsec was being defined but never used. To set the network device type the macro SET_NETDEV_DEVTYPE must be called. Compile tested only, I don't use macsec. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: remove type_check from dev_get_nest_level()Sabrina Dubroca
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13macsec: fix lockdep splats when nesting devicesSabrina Dubroca
Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11macsec: use after free when deleting the underlying deviceSabrina Dubroca
macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30macsec: fix negative refcnt on parent linkSabrina Dubroca
When creation of a macsec device fails because an identical device already exists on this link, the current code decrements the refcnt on the parent link (in ->destructor for the macsec device), but it had not been incremented yet. Move the dev_hold(parent_link) call earlier during macsec device creation. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30macsec: RXSAs don't need to hold a reference on RXSCsSabrina Dubroca
Following the previous patch, RXSCs are held and properly refcounted in the RX path (instead of being implicitly held by their SA), so the SA doesn't need to hold a reference on its parent RXSC. This also avoids panics on module unload caused by the double layer of RCU callbacks (call_rcu frees the RXSA, which puts the final reference on the RXSC and allows to free it in its own call_rcu) that commit b196c22af5c3 ("macsec: add rcu_barrier() on module exit") didn't protect against. There were also some refcounting bugs in macsec_add_rxsa where I didn't put the reference on the RXSC on the error paths, which would lead to memory leaks. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-30macsec: fix reference counting on RXSC in macsec_handle_frameSabrina Dubroca
Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26macsec: ensure rx_sa is set when validation is disabledBeniamino Galvani
macsec_decrypt() is not called when validation is disabled and so macsec_skb_cb(skb)->rx_sa is not set; but it is used later in macsec_post_decrypt(), ensure that it's always initialized. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Beniamino Galvani <bgalvani@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25macsec: validate ICV length on link creationDavide Caratti
Test the cipher suite initialization in case ICV length has a value different than its default. If this test fails, creation of a new macsec link will also fail. This avoids situations where further security associations can't be added due to failures of crypto_aead_setauthsize(), caused by unsupported user-provided values of the ICV length. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25macsec: fix error codes when a SA is createdDavide Caratti
preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25macsec: limit ICV length to 16 octetsDavide Caratti
IEEE 802.1AE-2006 standard recommends that the ICV element in a MACsec frame should not exceed 16 octets: add MACSEC_STD_ICV_LEN in uapi definitions accordingly, and avoid accepting configurations where the ICV length exceeds the standard value. Leave definition of MACSEC_MAX_ICV_LEN unchanged for backwards compatibility with userspace programs. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22macsec: enable GRO and RPS on macsec devicesPaolo Abeni
Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01macsec: set actual real device for xmit when !protect_framesDaniel Borkmann
Avoid recursions of dev_queue_xmit() to the wrong net device when frames are unprotected, since at that time skb->dev still points to our own macsec dev and unlike macsec_encrypt_finish() dev pointer doesn't get updated to real underlying device. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15macsec: fix SA initializationSabrina Dubroca
The ASYNC flag prevents initialization on some physical machines. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15macsec: allocate sg and iv on the heapSabrina Dubroca
For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15macsec: add rcu_barrier() on module exitSabrina Dubroca
Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20macsec: fix netlink attribute for key idSabrina Dubroca
In my last commit I replaced MACSEC_SA_ATTR_KEYID by MACSEC_SA_ATTR_KEY. Fixes: 8acca6acebd0 ("macsec: key identifier is 128 bits, not 64") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09macsec: key identifier is 128 bits, not 64Sabrina Dubroca
The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in the conflicts. In the macsec case, the change of the default ID macro name overlapped with the 64-bit netlink attribute alignment fixes in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26macsec: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25macsec: Convert to using IFF_NO_QUEUEPhil Sutter
Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix netlink attribute validationSabrina Dubroca
macsec_validate_attr should check IFLA_MACSEC_REPLAY_PROTECT (not IFLA_MACSEC_PROTECT) to verify that the replay protection and replay window arguments are correct. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add missing macsec prefix in uapiSabrina Dubroca
I accidentally forgot some MACSEC_ prefixes in if_macsec.h. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix SA leak if initialization failsSabrina Dubroca
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix memory leaks around rx_handler (un)registrationSabrina Dubroca
We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add consistency check to netlink dumpsSabrina Dubroca
Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix rx_sa refcounting with decrypt callbackSabrina Dubroca
The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: don't put a NULL rxsaSabrina Dubroca
The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 06:59:47 +0000