aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/sfc
AgeCommit message (Collapse)Author
2010-07-08sfc: Remove unused field left from mis-mergeBen Hutchings
Commit eedc765ca4b19a41cf0b921a492ac08d640060d1 merged changes from net-2.6 that added and then removed efx_nic::port_num, which was also added in net-next-2.6. The end result should be that it is removed, since it is now unused. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07net: fix 64 bit counters on 32 bit archesEric Dumazet
There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30sfc: Add support for RX flow hash controlBen Hutchings
Allow ethtool to query the number of RX rings, the fields used in RX flow hashing and the hash indirection table. Allow ethtool to update the RX flow hash indirection table. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30ethtool: Change ethtool_op_set_flags to validate flagsBen Hutchings
ethtool_op_set_flags() does not check for unsupported flags, and has no way of doing so. This means it is not suitable for use as a default implementation of ethtool_ops::set_flags. Add a 'supported' parameter specifying the flags that the driver and hardware support, validate the requested flags against this, and change all current callers to pass this parameter. Change some other trivial implementations of ethtool_ops::set_flags to call ethtool_op_set_flags(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Log clearer error messages for hardware monitorBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Use Toeplitz IPv4 hash for RSS and hash insertionBen Hutchings
Insertion of the Falcon hash is unreliable. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Move siena_nic_data::ipv6_rss_key to efx_nic::rx_hash_keyBen Hutchings
We will use this hash key for Toeplitz IPv4 hashing too. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Fix reading of inserted hashBen Hutchings
The hash appears immediately before the packet data, not at the beginning of the buffer. This means we can easily use negative offsets from the start of packet data, so adjust the data and length at the top of __efx_rx_packet() instead of wherever we consume the hash. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Record hardware RX hash on each skb where possibleBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Disable setting feature flags that are not implementedBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Replace EFX_DRIVER_NAME with KBUILD_MODNAMEBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Implement message level controlBen Hutchings
Replace EFX_ERR() with netif_err(), EFX_INFO() with netif_info(), EFX_LOG() with netif_dbg() and EFX_TRACE() and EFX_REGDUMP() with netif_vdbg(). Replace EFX_ERR_RL(), EFX_INFO_RL() and EFX_LOG_RL() using explicit calls to net_ratelimit(). Implement the ethtool operations to get and set message level flags, and add a 'debug' module parameter for the initial value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Log MTD errors using partition name, not just net device nameBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Implement ethtool register dump operationBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-12sfc: Implement 64-bit net device statistics on all architecturesBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/net_driver.h drivers/net/sfc/siena.c
2010-06-03sfc: Store port number in net_device::dev_idBen Hutchings
This exposes the port number to userland through sysfs. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03sfc: Get port number from CS_PORT_NUM, not PCI function numberBen Hutchings
A single shared memory region used to communicate with firmware is mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be able to identify which port they are addressing in order to use the correct sub-region. Currently we use the PCI function number, but the PCI address may be virtualised. Use the CS_PORT_NUM register field defined for just this purpose. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03drivers/net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Get port number from CS_PORT_NUM, not PCI function numberBen Hutchings
A single shared memory region used to communicate with firmware is mapped into both PCI PFs of the SFC9020 and SFL9021. Drivers must be able to identify which port they are addressing in order to use the correct sub-region. Currently we use the PCI function number, but the PCI address may be virtualised. Use the CS_PORT_NUM register field defined for just this purpose. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Only count bad packets in rx_errorsBen Hutchings
rx_errors is defined as 'bad packets received', but we are currently including various overflow errors as well. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Allow shared pages to be recycledSteve Hodgson
Insert a structure at the start of the shared page that tracks the dma mapping refcnt. DMA into the next cache line of the (shared) page (plus EFX_PAGE_IP_ALIGN). When recycling a page, check the page refcnt. If the page is otherwise unused, then resurrect the other receive buffer that previously referenced the page. Be careful not to overflow the receive ring, since we can now resurrect n receive buffers in a row. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Recycle discarded rx buffers back onto the queueSteve Hodgson
The cut-through design of the receive path means that packets that fail to match the appropriate MAC filter are not discarded at the MAC but are flagged in the completion event as 'to be discarded'. On networks with heavy multicast traffic, this can account for a significant proportion of received packets, so it is worthwhile to recycle the buffer immediately in this case rather than freeing it and then reallocating it shortly after. The only complication here is dealing with a page shared between two receive buffers. In that case, we need to be careful to free the dma mapping when both buffers have been free'd by the kernel. This means that we can only recycle such a page if both receive buffers are discarded. Unfortunately, in an environment with 1500mtu, rx_alloc_method=PAGE, and a mixture of discarded and not-discarded frames hitting the same receive queue, buffer recycling won't always be possible. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Support only two rx buffers per pageSteve Hodgson
- Pull the loop handling into efx_init_rx_buffers_(skb|page) - Remove rx_queue->buf_page, and associated clean up code - Remove unmap_addr, since unmap_addr is trivially calculable This will allow us to recycle discarded buffers directly from efx_rx_packet(), since will never be in the middle of splitting a page. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Remove efx_rx_queue::add_lockSteve Hodgson
Ensure that efx_fast_push_rx_descriptors() must only run from efx_process_channel() [NAPI], or when napi_disable() has been executed. Reimplement the slow fill by sending an event to the channel, so that NAPI runs, and hanging the subsequent fast fill off the event handler. Replace the sfc_refill workqueue and delayed work items with a timer. We do not need to stop this timer in efx_flush_all() because it's safe to send the event always; receiving it will be delayed until NAPI is restarted. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Allow DRV_GEN events to be used outside of selftestsSteve Hodgson
Formerly, efx_test_eventq_irq() assumed it was the only user of driver generated events. Allow it to interoperate with other users. We can create more than 16 channels, so align event codes with a multiple of 256 not 16. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Wait for the link to stay up before running loopback selftestSteve Hodgson
It's been observed that some phys (such as the qt2025c) can do down-up-down-up transitions, presumably as pcs block lock settles down. The loopback selftest will start sending data immediately after the link comes up. Work around this by waiting for the link state to stay up for two consecutive polls, rather than one. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Synchronise link_advertising and wanted_fc on SienaSteve Hodgson
All of the ethtool code paths keep them in sync, but we need to ensure they are sync'd at start of day. Matches the sft9001 driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Workaround flush failures on Falcon B0Steve Hodgson
Under certain conditions a PHY may backpressure Falcon B0 in such a way that flushes timeout. In normal circumstances the phy poller would fix the PHY, and the flush could complete. But efx_nic_flush_queues() is always called after efx_stop_all(), so the poller has been stopped. Even if this weren't the case, how long would we have to wait for the poller to fix this? And several callers of efx_nic_flush_queues() are about to reset the device anyway - so we don't need to do anything. Work around this bug by scheduling a reset. Ensure that the MAC is never rewired back into the datapath before the reset runs (we already ignore all rx events anyway). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Reschedule any resets scheduled inside efx_pm_freeze()Steve Hodgson
efx_pm_freeze() sets efx->state = STATE_FINI, which means efx_reset_work() will abort any scheduled resets. efx_pm_thaw() should reschedule efx_reset_work() again, since a freeze/thaw will not have reset the hardware. This bug was spotted by inspection - there is no real world example of this happening. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sfc: Rename struct efx_mcdi_phy_cfg to efx_mcdi_phy_dataBen Hutchings
Most of its members are constant capabilities, not configuration. The new name is also consistent with the name of the pointer to it in struct efx_nic and the names of structures used by other PHY drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-04-28sfc: Create multiple TX queuesBen Hutchings
Create a core TX queue and 2 hardware TX queues for each channel. If separate_tx_channels is set, create equal numbers of RX and TX channels instead. Rewrite the channel and queue iteration macros accordingly. Eliminate efx_channel::used_flags as redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Test only the first pair of TX queuesBen Hutchings
This makes no immediate difference, but we definitely do not want to test all TX queues once we allocate a pair of TX queues to each channel. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add Siena PHY BIST and cable diagnostic supportSteve Hodgson
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Clean up efx_nic::irq_zero_countBen Hutchings
There is no need for this to be unsigned long; make it unsigned int. It does need a line in kernel-doc, so add that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Add necessary parentheses to macro definitions in net_driver.hBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Break NAPI processing after one ring-full of TX completionsBen Hutchings
Currently TX completions do not count towards the NAPI budget. This means a continuous stream of TX completions can cause the polling function to loop indefinitely with scheduling disabled. To avoid this, follow the common practice of reporting the budget spent after processing one ring-full of TX completions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Set PERIODIC_NOEVENT flag for MC_CMD_MAC_STATSSteve Hodgson
When set, an event is not sent whenever periodic MAC statistics are raised. This avoids unnecessary wake-ups. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Update MCDI protocol definitionsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Enable IPv6 RSS using random key for Toeplitz hashBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Read MEM_STAT for SRM_PERR as well as MEM_PERR errorsSteve Hodgson
Parity errors in different blocks of SRAM may set one of two different interrupt flags. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Log specific message for failure of NVRAM self-testBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Extend the legacy interrupt workaroundsSteve Hodgson
Siena has two problems with legacy interrupts: 1. There is no synchronisation between the ISR read completion, and the interrupt deassert message. 2. A downstream read at the "wrong" moment can return 0, and suppress generating the next interrupt. Falcon should suffer from both of these, and it appears it does. Enable EFX_WORKAROUND_15783 on Falcon as well. Also, when we see queues == 0, ensure we always schedule or rearm every event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Reconfigure the XAUI serdes after an EM resetSteve Hodgson
Fix a regression introduced in d3245b28ef2a45ec4e115062a38100bd06229289 "sfc: Refactor link configuration". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Stop masking out XGMII faults over reconfiguresSteve Hodgson
The aim of this code was to avoid a spurious XGMII fault over a MAC reconfigure. It's less relevant now that the PHY reconfigure isn't called from the MAC reconfigure. After applying this patch, our link stress test passed 48 hours of testing without ever resetting the PHY. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Handle serious errors in exactly one interrupt handlerSteve Hodgson
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Consistently report short MCDI responses as EIOBen Hutchings
In some cases failing functions were returning 0 which is obviously wrong. In other cases they were returning inappropriate error codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Ignore parity errors in the other port's SRAMSteve Hodgson
Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Change falcon_probe_board() to fail for unsupported boardsBen Hutchings
The driver needs specific PHY and board support code for each SFC4000 board; there is no point trying to continue if it is missing. Currently unsupported boards can trigger an 'oops'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 11:17:23 +0000