aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2013-11-20r8152: fix incorrect type in assignmenthayeswang
The data from the hardware should be little endian. Correct the declaration. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20r8152: support stopping/waking tx queuehayeswang
The maximum packet number which a tx aggregation buffer could contain is the tx_qlen. tx_qlen = buffer size / (packet size + descriptor size). If the tx buffer is empty and the queued packets are more than the maximum value which is defined above, stop the tx queue. Wake the tx queue if tx queue is stopped and the queued packets are less than tx_qlen. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20r8152: modify the tx flowhayeswang
Remove the code for sending the packet in the rtl8152_start_xmit(). Let rtl8152_start_xmit() to queue the packet only, and schedule a tasklet to send the queued packets. This simplify the code and make sure all the packet would be sent by the original order. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20r8152: fix tx/rx memory overflowhayeswang
The tx/rx would access the memory which is out of the desired range. Modify the method of checking the end of the memory to avoid it. For r8152_tx_agg_fill(), the variable remain may become negative. However, the declaration is unsigned, so the while loop wouldn't break when reaching the end of the desied memory. Although to change the declaration from unsigned to signed is enough to fix it, I also modify the checking method for safe. Replace remain = rx_buf_sz - sizeof(*tx_desc) - (u32)((void *)tx_data - agg->head); with remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head); to make sure the variable remain is always positive. Then, the overflow wouldn't happen. For rx_bottom(), the rx_desc should not be used to calculate the packet length before making sure the rx_desc is in the desired range. Change the checking to two parts. First, check the descriptor is in the memory. The other, using the descriptor to find out the packet length and check if the packet is in the memory. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14net: cdc_ncm: cleanup a type issue in cdc_ncm_setup()Dan Carpenter
This is harmless but cdc_ncm_setup() returns negative error codes truncated to u8 values. There is only one caller and treats all non-zero returns as errors but doesn't store the the return code. So the code works correctly but it's messy and upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14usbnet: fix status interrupt urb handlingFelix Fietkau
Since commit 7b0c5f21f348a66de495868b8df0284e8dfd6bbf "sierra_net: keep status interrupt URB active", sierra_net triggers status interrupt polling before the net_device is opened (in order to properly receive the sync message response). To be able to receive further interrupts, the interrupt urb needs to be re-submitted, so this patch removes the bogus check for netif_running(). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05net: cdc_ncm: remove non-standard NCM device IDsEnrico Mioso
Remove device IDs of NCM-like (but not NCM-conformant) devices, that are handled by the huawwei_cdc_ncm driver now. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driverEnrico Mioso
This driver supports devices using the NCM protocol as an encapsulation layer for other protocols, like the E3131 Huawei 3G modem. This drivers approach was heavily inspired by the qmi_wwan/cdc_mbim approach & code model. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05net: cdc_ncm: Export cdc_ncm_{tx, rx}_fixup functions for re-useEnrico Mioso
Some drivers implementing NCM-like protocols, may re-use those functions, as is the case in the huawei_cdc_ncm driver. Export them via EXPORT_SYMBOL_GPL, in accordance with how other functions have been exported. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04net: cdc_mbim: fixup error return valueBjørn Mork
Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04net: cdc_mbim: no need to check for resume if suspend existsBjørn Mork
Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04net: qmi_wwan: no need to check for resume if suspend existsBjørn Mork
Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04net: qmi_wwan: manage_power should always set needs_remote_wakeupBjørn Mork
Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04net: cdc_mbim: manage_power should always set needs_remote_wakeupBjørn Mork
Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/netconsole.c net/bridge/br_private.h Three mostly trivial conflicts. The net/bridge/br_private.h conflict was a function signature (argument addition) change overlapping with the extern removals from Joe Perches. In drivers/net/netconsole.c we had one change adjusting a printk message whilst another changed "printk(KERN_INFO" into "pr_info(". Lastly, the emulex change was a new inline function addition overlapping with Joe Perches's extern removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: no not set tx_max higher than the device supportsBjørn Mork
There are MBIM devices out there reporting dwNtbInMaxSize=2048 dwNtbOutMaxSize=2048 and since the spec require a datagram max size of at least 2048, this means that a full sized datagram will never fit. Still, sending larger NTBs than the device supports is not going to help. We do not have any other options than either a) refusing to bindi, or b) respect the insanely low value. Alternative b will at least make these devices work, so go for it. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: improve bind error debug messagesBjørn Mork
Make it a bit easier for users to figure out what goes wrong when bind fails. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: return proper error if setup failsBjørn Mork
Most setup errors are ignored to ensure maximum firmware compatibilty. But GET_NTB_PARAMETERS and the functional descriptors are required. Use proper error codes and log level if these fail. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: refactoring cdc_ncm_setupBjørn Mork
Rewriting the "set max datagram" part of dc_ncm_setup to separate the selection and validatation of the size from the code which optionally informs the device of this value. This ensures that we use the correct value regardless of device support for the get and set commands. Removing some of the many indent levels while doing this to make the code more readable. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: endian convert constants instead of variablesBjørn Mork
Converting the constants used in these comparisons at build time instead of converting the variables for every received frame at run time. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: log signatures in hexBjørn Mork
These signatures are well known bit patterns, mostly made up of ascii characters. Mentally parsing works best if they are printed in hex. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: use netif_* and dev_* instead of pr_*Bjørn Mork
Take advantage of standard device name prefixing and netdevice msglvl control where possible. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: log the length we warn aboutBjørn Mork
Fix cut'n'paste typo. Log the bogus length and not the irrelevant signature. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: set correct dev->hard_mtuBjørn Mork
usbnet use the hard_mtu value for sizing the tx queue and nothing else. We will be transmitting buffers of up to tx_max size, so that's the proper value to give usbnet. The individual datagram size is completely irrelevant here. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove ethtool opsBjørn Mork
No need to keep this code duplicated from usbnet. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove probe and disconnect wrappersBjørn Mork
These functions were merely wrappers around the usbnet variants. Remove them. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: no point in filling up the NTBs if we send ZLPsBjørn Mork
Padding NTBs to max size is part of the support for devices optimizing their DMA transfers. This optimization depends on max sized NTBs not being ZLP terminated. So we are much better off dropping the padding if we are going to send a ZLP anyway. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: only the control intf can be probedBjørn Mork
The probed interface must be the master/control interface of the function. Make this explicit and simplify redundant tests. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove descriptor pointersBjørn Mork
header_desc was completely unused and union_desc was never used outside cdc_ncm_bind_common. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: fix SET_MAX_DATAGRAM_SIZEBjørn Mork
We need to inform the device about the *new* value, not the old one. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove ncm_parm fieldBjørn Mork
Moving the call to cdc_ncm_setup() after the endpoint setup removes the last remaining reference to ncm_parm outside cdc_ncm_setup. Collecting all the ncm_parm based calculations in cdc_ncm_setup improves readability. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove tx_speed and rx_speed fieldsBjørn Mork
These fields are only used to prevent printing the same speeds multiple times if we receive multiple identical speed notifications. The value of these printk's is questionable, and even more so when we filter out some of the notifications sent us by the firmware. If we are going to print any of these, then we should print them all. Removing little used fields is a bonus. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove unused udev fieldBjørn Mork
We already use the usbnet udev field everywhere this could have been used. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove redundant netdev fieldBjørn Mork
Too many pointers back and forth are likely to confuse developers, creating subtle bugs whenever we forget to syncronize them all. As a usbnet driver, we should stick with the standard struct usbnet fields as much as possible. The netdevice is one such field. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove redundant endpoint pointersBjørn Mork
No need to duplicate stuff already in the common usbnet struct. We still need to keep our special find_endpoints function because we need explicit control over the selected altsetting. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: remove redundant "intf" fieldBjørn Mork
This is always a duplicate of the "control" field. It causes confusion wrt intf_data updates and cleanups. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_ncm: simplify and optimize frame paddingBjørn Mork
We can avoid the costly division for the common case where we pad the frame to tx_max size as long as we ensure that tx_max is either the device specified dwNtbOutMaxSize or not a multiplum of wMaxPacketSize. Using the preconverted 'maxpacket' field avoids converting wMaxPacketSize to CPU endianness for every transmitted frame And since we only will hit the one byte padding rule for short frames, we can drop testing the skb for tailroom. The change means that tx_max now represents the real maximum skb size, enabling us to allocate the correct size instead of always making room for one extra byte. Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_mbim: change the default to send ZLPsBjørn Mork
A number of devices in the wild have turned out to require ZLPs. Even if this is a spec violation, our priority is to make any device work as good as possible. Devices needing ZLPs will fail to receive any full sized frame we send. On the other hand, devices which do not need the ZLP will still work if we send them. This gives us no other option than sending ZLPs by default. This will prevent devices conforming to the spec from making the optimizations which are possible without ZLPs. Adding known such devices to a whitelist, to avoid the possible negative impact of the new spec violating default. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-02net: cdc_mbim: handle IPv6 Neigbor SolicitationsBjørn Mork
MBIM is a point-to-point protocol transporting raw IP packets with no L2 headers. Only IPv4 and IPv6 are supported. ARP in particular is not, which is quite logical given the lack of L2 headers. The driver still emulates an ethernet interface, dropping all unsupported protocols, and avoiding neigbour resolving by setting the IFF_NOARP flag. The MBIM specification does not explicitly forbid IPv6 Neighbor Discovery, and it seems the other OS support will respond to Neighbor Solicitations on MBIM links. There are therefore buggy devices out there, which despite the pointlessness, still require Neighbor Discovery for IPv6 over MBIM. This is incompatible with the IFF_NOARP flag which disables both ARP and ND. We cannot support ARP in any case, so we have to keep that flag. This patch implements a workaround for the buggy devices, letting the driver respond directly to Neighbor Solicitations from the device. This is not optimal, but will have minimal effect on any sane device. Cc: Greg Suarez <gsuarez@smithmicro.com> Reported-and-tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25ax88179_178a: Remove AX_MEDIUM_ALWAYS_ONE bit in AX_MEDIUM_STATUS_MODE ↵Freddy Xin
register to avoid TX throttling Remove AX_MEDIUM_ALWAYS_ONE in AX_MEDIUM_STATUS_MODE register. Setting this bit may cause TX throttling in Half-Duplex mode. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22ax88179_178a: Add VID:DID for Samsung USB Ethernet AdapterFreddy Xin
Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22ax88179_178a: Correct the RX error definition in RX headerFreddy Xin
Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17net: qmi_wwan: Olivetti Olicard 200 supportEnrico Mioso
This is a QMI device, manufactured by TCT Mobile Phones. A companion patch blacklisting this device's QMI interface in the option.c driver has been sent. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17usbnet: fix error return code in usbnet_probe()Wei Yongjun
Fix to return -ENOMEM in the padding pkt alloc fail error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/usb/qmi_wwan.c drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h include/net/netfilter/nf_conntrack_synproxy.h include/net/secure_seq.h The conflicts are of two varieties: 1) Conflicts with Joe Perches's 'extern' removal from header file function declarations. Usually it's an argument signature change or a function being added/removed. The resolutions are trivial. 2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds a new value, another changes an existing value. That sort of thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30dm9601: fix IFF_ALLMULTI handlingPeter Korsgaard
Pass-all-multicast is controlled by bit 3 in RX control, not bit 2 (pass undersized frames). Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30net: qmi_wwan: fix Cinterion PLXX product IDAleksander Morgado
Cinterion PLXX LTE devices have a 0x0060 product ID, not 0x12d1. The blacklisting in the serial/option driver does actually use the correct PID, as per commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db ('USB: Blacklisted Cinterion's PLxx WWAN Interface'). CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> Signed-off-by: Aleksander Morgado <aleksander@lanedo.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30net: qmi_wwan: fix checkpatch warningsFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 09:45:44 +0000