aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/virtio_net.c
AgeCommit message (Collapse)Author
2019-04-06virtio-net: Fix some minor formatting errorsYuval Shaia
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06virtio-net: Remove inclusion of pci.hYuval Shaia
This header is not in use - remove it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18virtio_net: remove hcpu from virtnet_clean_affinityPeter Xu
The variable is never used. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: virtualization@lists.linux-foundation.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03virtio_net: Account for tx bytes and packets on sending xdp_framesToshiaki Makita
Previously virtnet_xdp_xmit() did not account for device tx counters, which caused confusions. To be consistent with SKBs, account them on freeing xdp_frames. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Differentiate sk_buff and xdp_frame on freeingToshiaki Makita
We do not reset or free up unused buffers when enabling/disabling XDP, so it can happen that xdp_frames are freed after disabling XDP or sk_buffs are freed after enabling XDP on xdp tx queues. Thus we need to handle both forms (xdp_frames and sk_buffs) regardless of XDP setting. One way to trigger this problem is to disable XDP when napi_tx is enabled. In that case, virtnet_xdp_set() calls virtnet_napi_enable() which kicks NAPI. The NAPI handler will call virtnet_poll_cleantx() which invokes free_old_xmit_skbs() for queues which have been used by XDP. Note that even with this change we need to keep skipping free_old_xmit_skbs() from NAPI handlers when XDP is enabled, because XDP tx queues do not aquire queue locks. - v2: Use napi_consume_skb() instead of dev_consume_skb_any() Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Use xdp_return_frame to free xdp_frames on destroying vqsToshiaki Makita
put_page() can work as a fallback for freeing xdp_frames, but the appropriate way is to use xdp_return_frame(). Fixes: cac320c850ef ("virtio_net: convert to use generic xdp_frame and xdp_return_frame API") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Don't process redirected XDP frames when XDP is disabledToshiaki Makita
Commit 8dcc5b0ab0ec ("virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP") tried to avoid access to unexpected sq while XDP is disabled, but was not complete. There was a small window which causes out of bounds sq access in virtnet_xdp_xmit() while disabling XDP. An example case of - curr_queue_pairs = 6 (2 for SKB and 4 for XDP) - online_cpu_num = xdp_queue_paris = 4 when XDP is enabled: CPU 0 CPU 1 (Disabling XDP) (Processing redirected XDP frames) virtnet_xdp_xmit() virtnet_xdp_set() _virtnet_set_queues() set curr_queue_pairs (2) check if rq->xdp_prog is not NULL virtnet_xdp_sq(vi) qp = curr_queue_pairs - xdp_queue_pairs + smp_processor_id() = 2 - 4 + 1 = -1 sq = &vi->sq[qp] // out of bounds access set xdp_queue_pairs (0) rq->xdp_prog = NULL Basically we should not change curr_queue_pairs and xdp_queue_pairs while someone can read the values. Thus, when disabling XDP, assign NULL to rq->xdp_prog first, and wait for RCU grace period, then change xxx_queue_pairs. Note that we need to keep the current order when enabling XDP though. - v2: Make rcu_assign_pointer/synchronize_net conditional instead of _virtnet_set_queues. Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Fix out of bounds access of sqToshiaki Makita
When XDP is disabled, curr_queue_pairs + smp_processor_id() can be larger than max_queue_pairs. There is no guarantee that we have enough XDP send queues dedicated for each cpu when XDP is disabled, so do not count drops on sq in that case. Fixes: 5b8f3c8d30a6 ("virtio_net: Add XDP related stats") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Fix not restoring real_num_rx_queuesToshiaki Makita
When _virtnet_set_queues() failed we did not restore real_num_rx_queues. Fix this by placing the change of real_num_rx_queues after _virtnet_set_queues(). This order is also in line with virtnet_set_channels(). Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Don't call free_old_xmit_skbs for xdp_framesToshiaki Makita
When napi_tx is enabled, virtnet_poll_cleantx() called free_old_xmit_skbs() even for xdp send queue. This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled device tx bytes counters because skb->len is meaningless value, and even triggered oops due to general protection fault on freeing them. Since xdp send queues do not aquire locks, old xdp_frames should be freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for xdp send queues. Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI handler is called even without calling start_xmit() because cb for tx is by default enabled. Once the handler is called, it enabled the cb again, and then the handler would be called again. We don't need this handler for XDP, so don't enable cb as well as not calling free_old_xmit_skbs(). Also, we need to disable tx NAPI when disabling XDP, so virtnet_poll_tx() can safely access curr_queue_pairs and xdp_queue_pairs, which are not atomically updated while disabling XDP. Fixes: b92f1e6751a6 ("virtio-net: transmit napi") Fixes: 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30virtio_net: Don't enable NAPI when interface is downToshiaki Makita
Commit 4e09ff536284 ("virtio-net: disable NAPI only when enabled during XDP set") tried to fix inappropriate NAPI enabling/disabling when !netif_running(), but was not complete. On error path virtio_net could enable NAPI even when !netif_running(). This can cause enabling NAPI twice on virtnet_open(), which would trigger BUG_ON() in napi_enable(). Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Completely minor snmp doc conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19virtio_net: bulk free tx skbsMichael S. Tsirkin
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is safe to call in a non-napi context as long as the napi_budget flag is correct. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19virtio-net: per-queue RPS configWillem de Bruijn
On multiqueue network devices, RPS maps are configured independently for each receive queue through /sys/class/net/$DEV/queues/rx-*. On virtio-net currently all packets use the map from rx-0, because the real rx queue is not known at time of map lookup by get_rps_cpu. Call skb_record_rx_queue in the driver rx path to make lookup work. Recording the receive queue has ramifications beyond RPS, such as in sticky load balancing decisions for sockets (skb_tx_hash) and XPS. Reported-by: Mark Hlady <mhlady@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20virtio-net: ethtool configurable LROWillem de Bruijn
Virtio-net devices negotiate LRO support with the host. Display the initially negotiated state with ethtool -k. Also allow configuring it with ethtool -K, reusing the existing virtnet_set_guest_offloads helper that configures LRO for XDP. This is conditional on VIRTIO_NET_F_CTRL_GUEST_OFFLOADS. Virtio-net negotiates TSO4 and TSO6 separately, but ethtool does not distinguish between the two. Display LRO as on only if any offload is active. RTNL is held while calling virtnet_set_features, same as on the path from virtnet_xdp_set. Changes v1 -> v2 - allow ethtool config (-K) only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS - show LRO as enabled if any LRO variant is enabled - do not allow configuration while XDP is active - differentiate current features from the capable set, to restore on XDP down only those features that were active on XDP up - move test out of VIRTIO_NET_F_CSUM/TSO branch, which is tx only Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30virtio-net: keep vnet header zeroed after processing XDPJason Wang
We copy vnet header unconditionally in page_to_skb() this is wrong since XDP may modify the packet data. So let's keep a zeroed vnet header for not confusing the conversion between vnet header and skb metadata. In the future, we should able to detect whether or not the packet was modified and keep using the vnet header when packet was not touched. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Pavel Popa <pashinho1990@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
net/sched/cls_api.c has overlapping changes to a call to nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL to the 5th argument, and another (from 'net-next') added cb->extack instead of NULL to the 6th argument. net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to code which moved (to mr_table_dump)) in 'net-next'. Thanks to David Ahern for the heads up. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17virtio_net: avoid using netif_tx_disable() for serializing tx routineAke Koomsin
Commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") introduces netif_tx_disable() after netif_device_detach() in order to avoid use-after-free of tx queues. However, there are two issues. 1) Its operation is redundant with netif_device_detach() in case the interface is running. 2) In case of the interface is not running before suspending and resuming, the tx does not get resumed by netif_device_attach(). This results in losing network connectivity. It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for serializing tx routine during reset. This also preserves the symmetry of netif_device_detach() and netif_device_attach(). Fixes commit 713a98d90c5e ("virtio-net: serialize tx routine during reset") Signed-off-by: Ake Koomsin <ake@igel.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10virtio_net: ethtool tx napi configurationJason Wang
Implement ethtool .set_coalesce (-C) and .get_coalesce (-c) handlers. Interrupt moderation is currently not supported, so these accept and display the default settings of 0 usec and 1 frame. Toggle tx napi through setting tx-frames. So as to not interfere with possible future interrupt moderation, value 1 means tx napi while value 0 means not. Only allow the switching when device is down for simplicity. Link: https://patchwork.ozlabs.org/patch/948149/ Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28virtio_net: remove ndo_poll_controllerEric Dumazet
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. virto_net uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13virtio_net: remove duplicated include from virtio_net.cYueHaibing
Remove duplicated include linux/netdevice.h Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11virtio_net: Stripe queue affinities across cores.Caleb Raitto
Always set the affinity hint, even if #cpu != #vq. Handle the case where #cpu > #vq (including when #cpu % #vq != 0) and when #vq > #cpu (including when #vq % #cpu != 0). Signed-off-by: Caleb Raitto <caraitto@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jon Olson <jonolson@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11virtio: Make vp_set_vq_affinity() take a mask.Caleb Raitto
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU. If there are fewer queues than cores, queue affinity should be able to map to multiple cores. Link: https://patchwork.ozlabs.org/patch/948149/ Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Caleb Raitto <caraitto@google.com> Acked-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: allow to call netif_reset_xps_queues() under cpus_read_lockAndrei Vagin
The definition of static_key_slow_inc() has cpus_read_lock in place. In the virtio_net driver, XPS queues are initialized after setting the queue:cpu affinity in virtnet_set_affinity() which is already protected within cpus_read_lock. Lockdep prints a warning when we are trying to acquire cpus_read_lock when it is already held. This patch adds an ability to call __netif_set_xps_queue under cpus_read_lock(). Acked-by: Jason Wang <jasowang@redhat.com> ============================================ WARNING: possible recursive locking detected 4.18.0-rc3-next-20180703+ #1 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20 but task is already holding lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110 #1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 #2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60 v2: move cpus_read_lock() out of __netif_set_xps_queue() Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05virtio-net: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1402059 ("Missing break in switch") Addresses-Coverity-ID: 1402060 ("Missing break in switch") Addresses-Coverity-ID: 1402061 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31virtio-net: get rid of unnecessary container of rq statsJason Wang
We don't maintain tx counters in rx stats any more. There's no need for an extra container of rq stats. Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31virtio-net: correctly update XDP_TX countersJason Wang
Commit 5b8f3c8d30a6 ("virtio_net: Add XDP related stats") tries to count TX XDP stats in virtnet_receive(). This will cause several issues: - virtnet_xdp_sq() was called without checking whether or not XDP is set. This may cause out of bound access when there's no enough txq for XDP. - Stats were updated even if there's no XDP/XDP_TX. Fixing this by reusing virtnet_xdp_xmit() for XDP_TX which can counts TX XDP counter itself and remove the unnecessary tx stats embedded in rx stats. Reported-by: syzbot+604f8271211546f5b3c7@syzkaller.appspotmail.com Fixes: 5b8f3c8d30a6 ("virtio_net: Add XDP related stats") Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Add kick statsToshiaki Makita
So we can infer the number of VM-Exits. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Add XDP related statsToshiaki Makita
Add counters below: * Tx - xdp_tx: frames sent by ndo_xdp_xmit or XDP_TX. - xdp_tx_drops: dropped frames out of xdp_tx ones. * Rx - xdp_packets: frames went through xdp program. - xdp_tx: XDP_TX frames. - xdp_redirects: XDP_REDIRECT frames. - xdp_drops: any dropped frames out of xdp_packets ones. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Factor out the logic to determine xdp sqToshiaki Makita
Make sure to use the same logic in all places to determine xdp sq. This is useful for xdp counters which the following commit will introduce as well. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Make drop counter per-queueToshiaki Makita
Since when XDP was introduced, drop counter has been able to be updated much more frequently than before, as XDP_DROP increments the counter. Thus for performance analysis per-queue drop counter would be useful. Also this avoids cache contention and race on updating the counter. It is currently racy because napi handlers read-modify-write it without any locks. There are more counters in dev->stats that are racy, but I left them per-device, because they are rarely updated and does not worth being per-queue counters IMHO. To fix them we need atomic ops or some kind of locks. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Use temporary storage for accounting rx statsToshiaki Makita
The purpose is to keep receive_buf arguments simple when more per-queue counter items are added later. Also XDP_TX related sq counters will be updated in the following changes so create a container struct virtnet_rx_stats which will includes both rq and sq statistics. For now it only covers rq stats. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25virtio_net: Fix incosistent received bytes counterToshiaki Makita
When received packets are dropped in virtio_net driver, received packets counter is incremented but bytes counter is not. As a result, for instance if we drop all packets by XDP, only received is counted and bytes stays 0, which looks inconsistent. IMHO received packets/bytes should be counted if packets are produced by the hypervisor, like what common NICs on physical machines are doing. So fix the bytes counter. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13xdp: don't make drivers report attachment modeJakub Kicinski
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28virtio_net: split XDP_TX kick and XDP_REDIRECT map flushingJesper Dangaard Brouer
The driver was combining XDP_TX virtqueue_kick and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. The suboptimal behavior was introduced in commit 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets"). Fixes: 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlanWillem de Bruijn
Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr to communicate packet metadata to userspace. For skbuffs with vlan, the first two return the packet as it may have existed on the wire, inserting the VLAN tag in the user buffer. Then virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes. Commit f09e2249c4f5 ("macvtap: restore vlan header on user read") added this feature to macvtap. Commit 3ce9b20f1971 ("macvtap: Fix csum_start when VLAN tags are present") then fixed up csum_start. Virtio, packet and uml do not insert the vlan header in the user buffer. When introducing virtio_net_hdr_from_skb to deduplicate filling in the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was applied uniformly, breaking csum offset for packets with vlan on virtio and packet. Make insertion of VLAN_HLEN optional. Convert the callers to pass it when needed. Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Fixes: 1276f24eeef2 ("packet: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-06-05 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a new BPF hook for sendmsg similar to existing hooks for bind and connect: "This allows to override source IP (including the case when it's set via cmsg(3)) and destination IP:port for unconnected UDP (slow path). TCP and connected UDP (fast path) are not affected. This makes UDP support complete, that is, connected UDP is handled by connect hooks, unconnected by sendmsg ones.", from Andrey. 2) Rework of the AF_XDP API to allow extending it in future for type writer model if necessary. In this mode a memory window is passed to hardware and multiple frames might be filled into that window instead of just one that is the case in the current fixed frame-size model. With the new changes made this can be supported without having to add a new descriptor format. Also, core bits for the zero-copy support for AF_XDP have been merged as agreed upon, where i40e bits will be routed via Jeff later on. Various improvements to documentation and sample programs included as well, all from Björn and Magnus. 3) Given BPF's flexibility, a new program type has been added to implement infrared decoders. Quote: "The kernel IR decoders support the most widely used IR protocols, but there are many protocols which are not supported. [...] There is a 'long tail' of unsupported IR protocols, for which lircd is need to decode the IR. IR encoding is done in such a way that some simple circuit can decode it; therefore, BPF is ideal. [...] user-space can define a decoder in BPF, attach it to the rc device through the lirc chardev.", from Sean. 4) Several improvements and fixes to BPF core, among others, dumping map and prog IDs into fdinfo which is a straight forward way to correlate BPF objects used by applications, removing an indirect call and therefore retpoline in all map lookup/update/delete calls by invoking the callback directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper for tc BPF programs to have an efficient way of looking up cgroup v2 id for policy or other use cases. Fixes to make sure we zero tunnel/xfrm state that hasn't been filled, to allow context access wrt pt_regs in 32 bit archs for tracing, and last but not least various test cases for fixes that landed in bpf earlier, from Daniel. 5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper. 6) Add a new bpf_get_current_cgroup_id() helper that can be used in tracing to retrieve the cgroup id from the current process in order to allow for e.g. aggregation of container-level events, from Yonghong. 7) Two follow-up fixes for BTF to reject invalid input values and related to that also two test cases for BPF kselftests, from Martin. 8) Various API improvements to the bpf_fib_lookup() helper, that is, dropping MPLS bits which are not fully hashed out yet, rejecting invalid helper flags, returning error for unsupported address families as well as renaming flowlabel to flowinfo, from David. 9) Various fixes and improvements to sockmap BPF kselftests in particular in proper error detection and data verification, from Prashant. 10) Two arm32 BPF JIT improvements. One is to fix imm range check with regards to whether immediate fits into 24 bits, and a naming cleanup to get functions related to rsh handling consistent to those handling lsh, from Wang. 11) Two compile warning fixes in BPF, one for BTF and a false positive to silent gcc in stack_map_get_build_id_offset(), from Arnd. 12) Add missing seg6.h header into tools include infrastructure in order to fix compilation of BPF kselftests, from Mathieu. 13) Several formatting cleanups in the BPF UAPI helper description that also fix an error during rst2man compilation, from Quentin. 14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is not built into the kernel, from Yue. 15) Remove a useless double assignment in dev_map_enqueue(), from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05virtio_net: remove ndo_xdp_flush call virtnet_xdp_flushJesper Dangaard Brouer
Remove the ndo_xdp_flush call implementation virtnet_xdp_flush as no callers of ndo_xdp_flush are left. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04net: virtio: simplify the virtnet_find_vqsTonghao Zhang
Use the common free functions while return successfully. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03virtio_net: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag virtnet_xdp_xmit now performs the same virtqueue_kick as virtnet_xdp_flush. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03xdp: add flags argument to ndo_xdp_xmit APIJesper Dangaard Brouer
This patch only change the API and reject any use of flags. This is an intermediate step that allows us to implement the flush flag operation later, for each individual driver in a separate patch. The plan is to implement flush operation via XDP_XMIT_FLUSH flag and then remove XDP_XMIT_FLAGS_NONE when done. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-31virtio_net: fix error return code in virtnet_probe()Wei Yongjun
Fix to return a negative error code from the failover create fail error handling case instead of 0, as done elsewhere in this function. Fixes: ba5e4426e80e ("virtio_net: Extend virtio to use VF datapath when available") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28virtio_net: Extend virtio to use VF datapath when availableSridhar Samudrala
This patch enables virtio_net to switch over to a VF datapath when STANDBY feature is enabled and a VF netdev is present with the same MAC address. It allows live migration of a VM with a direct attached VF without the need to setup a bond/team between a VF and virtio net device in the guest. It uses the API that is exported by the net_failover driver to create and and destroy a master failover netdev. When STANDBY feature is enabled, an additional netdev(failover netdev) is created that acts as a master device and tracks the state of the 2 lower netdevs. The original virtio_net netdev is marked as 'standby' netdev and a passthru device with the same MAC is registered as 'primary' netdev. The hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-28virtio_net: Introduce VIRTIO_NET_F_STANDBY feature bitSridhar Samudrala
This feature bit can be used by hypervisor to indicate virtio_net device to act as a standby for another device with the same MAC address. VIRTIO_NET_F_STANDBY is defined as bit 62 as it is a device feature bit. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 07:25:01 +0000