aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2021-01-05wil6210: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-22Merge tag 'wireless-drivers-2020-12-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18ath11k: pci: disable ASPM L0sLs before downloading firmwareCarl Huang
Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608218530-15426-1-git-send-email-kvalo@codeaurora.org
2020-12-18ath11k: qmi: try to allocate a big block of DMA memory firstCarl Huang
Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
2020-12-17ath11k: Fix ath11k_pci_fix_l1ss()Dan Carpenter
All these conditions are reversed so presumably most of the function is dead code. This caused a spurious warning: [ 95.734922] ath11k_pci 0000:06:00.0: failed to set sysclk: 0 Fixes: 0699940755e9 ("ath11k: pci: fix L1ss clock unstable problem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nGDHiTh+Z+asDy@mwanda
2020-12-17ath11k: Fix error code in ath11k_core_suspend()Dan Carpenter
The "if (!ret)" condition is inverted and it should be "if (ret)". It means that we return success when we had intended to return an error code. This also caused a spurious warning even when the suspend was successful: [ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0 Fixes: d1b0c33850d2 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nF17L2/EKOSbn/@mwanda
2020-12-17ath11k: start vdev if a bss peer is already createdCarl Huang
For QCA6390, bss peer must be created before vdev is to start. This change is to start vdev if a bss peer is created. Otherwise, ath11k delays to start vdev. This fixes an issue in a case where HT/VHT/HE settings change between authentication and association, e.g., due to the user space request to disable HT. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org
2020-12-17ath11k: fix crash caused by NULL rx_channelCarl Huang
During connect and disconnect stress test, crashed happened because ar->rx_channel is NULL. Fix it by checking whether ar->rx_channel is NULL. Crash stack is as below: RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k] [ 5028.808963] ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k] [ 5028.808970] ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k] [ 5028.808978] ath11k_dp_service_srng+0x25e/0x2d0 [ath11k] [ 5028.808982] ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci] [ 5028.808986] net_rx_action+0x27e/0x400 [ 5028.808990] __do_softirq+0xfd/0x2bb [ 5028.808993] irq_exit+0xa6/0xb0 [ 5028.808995] do_IRQ+0x56/0xe0 [ 5028.808997] common_interrupt+0xf/0xf Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
2020-12-17ath11k: add missing null check on allocated skbColin Ian King
Currently the null check on a newly allocated skb is missing and this can lead to a null pointer dereference is the allocation fails. Fix this by adding a null check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 43ed15e1ee01 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214232417.84556-1-colin.king@canonical.com
2020-12-15ath9k: make relay callbacks constJani Nikula
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/7db0286c428f3a478dd7544afef04a3b131f1aa0.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15ath11k: make relay callbacks constJani Nikula
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/44e3d65b71025c462948d0c554061dc7b40ab488.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15ath10k: make relay callbacks constJani Nikula
Now that relay_open() accepts const callbacks, make relay callbacks const. Link: https://lkml.kernel.org/r/85cabc6d4b0d0ca43d4e0fb94897ccd16e3b7930.1606153547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-11-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: add ce irq enable and disable functionsCarl Huang
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-10-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-9-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-8-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: implement suspend handlingCarl Huang
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607708150-21066-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-7-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: disable VDD4BLOWCarl Huang
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-6-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix L1ss clock unstable problemCarl Huang
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-5-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: pci: fix hot reset stability issuesCarl Huang
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-4-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-3-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607609124-17250-2-git-send-email-kvalo@codeaurora.org
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605634436-36506-1-git-send-email-bbhatt@codeaurora.org
2020-12-12ath10k: add atomic protection for device recoveryWen Gong
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-12ath10k: add option for chip-id based BDF selectionAbhishek Kumar
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Abhishek Kumar <kuabhs@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid
2020-12-09ath9k_htc: adhere to the DONT_REORDER transmit flagMathy Vanhoef
Assure that frames with the fixed order flag are not reordered relative to each other. This is accomplished by transmitting them using a fixed priority independent of their QoS field. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104061823.197407-6-Mathy.Vanhoef@kuleuven.be
2020-12-09ath11k: mesh: add support for 256 bitmap in blockack frames in 11axPradeep Kumar Chitrapu
Currently 256 bitmap in blockack frames is being set only for AP mode. Fix this to set whenever beacon has changed and has HE capability, there by supporting mesh as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-5-pradeepc@codeaurora.org
2020-12-09ath11k: support TXOP duration based RTS thresholdPradeep Kumar Chitrapu
HE operation IE in beacons is constructed based on userspace params, which firmware might not be aware of. This causes firmware not to configure TXOP duration based RTS threshold which could cause mismatch in behaviour with respect to what is being advertised in beacons. This patch sends HE operation IE fetched from beacon to firmware using WMI interface for configuration. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-4-pradeepc@codeaurora.org
2020-12-09ath11k: fix incorrect wmi param for configuring HE operationPradeep Kumar Chitrapu
WMI_VDEV_PARAM_TX_OFDMA_CPLEN has been added with incorrect enum value. Fix the enum to represent WMI param for configuring HE operation field. This is applicable to firmwares under https://github.com/kvalo/ath11k-firmware/tree/master/IPQ8074/hw2.0 https://github.com/kvalo/ath11k-firmware/tree/master/IPQ6018/hw1.0 https://github.com/kvalo/ath11k-firmware/tree/master/QCN9074/hw1.0 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-3-pradeepc@codeaurora.org
2020-12-09ath11k: unlock on error path in ath11k_mac_op_add_interface()Dan Carpenter
These error paths need to drop the &ar->conf_mutex before returning. Fixes: 690ace20ff79 ("ath11k: peer delete synchronization with firmware") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X85sVGVP/0XvlrEJ@mwanda
2020-12-09wcn36xx: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
2020-12-09carl9170: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/04257418814755f081fa0ac14a61b01328cdc4ed.1605896059.git.gustavoars@kernel.org
2020-12-09ath5k: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e127232621c4de340509047a11d98093958303c5.1605896059.git.gustavoars@kernel.org
2020-12-09ath11k: fix rmmod failure if qmi sequence failsAnilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606916215-24643-1-git-send-email-akolli@codeaurora.org
2020-12-08carl9170: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175531.2754461-1-trix@redhat.com
2020-12-08ath11k: pci: add MODULE_FIRMWARE macrosDevin Bayer
I am trying to get the ath11k driver to work with VyOS and during the build it tries to discover the firmware blobs which drivers require. This doesn't work with ath11k because it doesn't use the MODULE_FIRMWARE macro. This patch fixes that. Signed-off-by: Devin Bayer <dev@doubly.so> [kvalo@codeaurora.org: cleanup commit log, move to pci.c] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201202182705.dhkml4nb4rf2vwav@orac
2020-12-07ath9k: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175336.2752730-1-trix@redhat.com
2020-12-07ath11k: Ignore resetting peer auth flag in peer assoc cmdSeevalamuthu Mariappan
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606369414-25211-1-git-send-email-seevalam@codeaurora.org
2020-12-07ath11k: add 64bit check before reading msi high addrAnilkumar Kolli
In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI. Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606199334-18206-1-git-send-email-akolli@codeaurora.org
2020-12-07ath10k: fix a check patch warning returnNonBoolInBooleanFunction of sdio.cWen Gong
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <rong.a.chen@intel.com> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606103240-9868-1-git-send-email-wgong@codeaurora.org
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.11. Major changes: ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly
2020-12-02ath11k: dp_rx: fix monitor status dma unmap directionKalle Valo
After enabling CONFIG_DMA_API_DEBUG there was a warning about using dma_unmap_single() in wrong direction from ath11k_dp_rx_process_mon_status(). [ 140.279477] ------------[ cut here ]------------ [ 140.279908] DMA-API: ath11k_pci 0000:06:00.0: device driver syncs DMA memory with different direction [device address=0x00000000fac08a40] [size=2176 bytes] [mapped with DMA_FROM_DEVICE] [s [ 140.279925] WARNING: CPU: 7 PID: 97 at kernel/dma/debug.c:1120 check_sync+0x494/0x730 [ 140.279939] Modules linked in: ath11k_pci ath11k mac80211 libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr ns nvme nvme_core [ 140.279958] CPU: 7 PID: 97 Comm: kworker/u16:1 Not tainted 5.10.0-rc4+ #262 [ 140.279968] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 140.279995] Workqueue: phy0 ieee80211_scan_work [mac80211] [ 140.280009] RIP: 0010:check_sync+0x494/0x730 [ 140.280022] Code: 8b 4c 24 10 4c 8b 44 24 18 4c 8b 54 24 20 48 89 c6 4c 89 54 24 10 4c 89 f9 4c 89 ea 48 c7 c7 40 b9 74 9c 41 56 e8 2f a0 ab 00 <0f> 0b 48 89 ef e8 e5 17 ac 00 41 58 4c 8b [ 140.280033] RSP: 0018:ffff9f588024cbd8 EFLAGS: 00010086 [ 140.280046] RAX: 0000000000000000 RBX: ffff9f588024cc40 RCX: ffff8eed18dd9f98 [ 140.280057] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8eed18dd9f90 [ 140.280067] RBP: ffff8eebc1407800 R08: 00000000ffffffea R09: 0000000000000000 [ 140.280082] R10: 0000000000000003 R11: 3fffffffffffffff R12: ffffffff9e081060 [ 140.280093] R13: ffff8eebc43908b0 R14: ffffffff9c74c104 R15: 00000000fac08a40 [ 140.280104] FS: 0000000000000000(0000) GS:ffff8eed18c00000(0000) knlGS:0000000000000000 [ 140.280115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 140.280127] CR2: 00007f6feafb12a0 CR3: 00000001604ca001 CR4: 00000000003706e0 [ 140.280138] Call Trace: [ 140.280149] <IRQ> [ 140.280161] debug_dma_sync_single_for_cpu+0x79/0x80 [ 140.280173] ? mark_held_locks+0x50/0x80 [ 140.280185] ? lockdep_hardirqs_on_prepare.part.0+0x65/0x130 [ 140.280197] ? __local_bh_enable_ip+0x6f/0xb0 [ 140.280215] ? ath11k_dp_rx_reap_mon_status_ring+0x202/0x340 [ath11k] [ 140.280231] ath11k_dp_rx_reap_mon_status_ring+0x22c/0x340 [ath11k] [ 140.280249] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280265] ath11k_dp_rx_process_mon_status+0x83/0x3c0 [ath11k] [ 140.280278] ? __lock_acquire+0x3bd/0x6d0 [ 140.280296] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280311] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280326] ? ath11k_hw_mac_id_to_srng_id_qca6390+0x10/0x10 [ath11k] [ 140.280341] ? ath11k_dp_rx_process_mon_rings+0x4a/0x1a0 [ath11k] [ 140.280353] ? timer_fixup_init+0x30/0x30 [ 140.280367] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280385] ath11k_dp_service_mon_ring+0x2b/0x50 [ath11k] [ 140.280400] ? ath11k_dp_rx_process_mon_rings+0x1a0/0x1a0 [ath11k] [ 140.280413] call_timer_fn+0xb1/0x2d0 [ 140.280426] __run_timers.part.0+0x205/0x2f0 [ 140.280439] run_timer_softirq+0x21/0x50 [ 140.280450] __do_softirq+0xc2/0x454 [ 140.280463] asm_call_irq_on_stack+0x12/0x20 [ 140.280476] </IRQ> [ 140.280488] do_softirq_own_stack+0x56/0x60 [ 140.280500] irq_exit_rcu+0x9a/0xd0 [ 140.280511] sysvec_apic_timer_interrupt+0x43/0xa0 [ 140.280526] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 140.280540] RIP: 0010:_raw_spin_unlock_irqrestore+0x25/0x40 [ 140.280551] Code: 80 00 00 00 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 ca 8f 4b ff 48 89 ef e8 22 dc 4b ff f6 c7 02 75 0c 53 9d <65> ff 0d 04 51 20 64 5b 5d c3 e8 9c 08 56 [ 140.280563] RSP: 0018:ffff9f58802e7878 EFLAGS: 00000246 [ 140.280578] RAX: 00000000000435ef RBX: 0000000000000246 RCX: 0000000000000040 [ 140.280592] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9be13e84 [ 140.280603] RBP: ffff8eed18dde480 R08: 0000000000000001 R09: ffff8eebc2292760 [ 140.280614] R10: 0000000000000005 R11: ffff8eebc2292760 R12: 0000000000000000 [ 140.280625] R13: ffff9f58802e7900 R14: ffff8eed18dde480 R15: ffff8eed18dde480 [ 140.280637] ? _raw_spin_unlock_irqrestore+0x34/0x40 [ 140.280649] __mod_timer+0x274/0x400 [ 140.280661] ? wait_for_completion_timeout+0x76/0x110 [ 140.280675] schedule_timeout+0xa8/0x140 [ 140.280687] ? __next_timer_interrupt+0x100/0x100 [ 140.280698] wait_for_completion_timeout+0xa2/0x110 [ 140.280714] ath11k_start_scan+0x4c/0xf0 [ath11k] [ 140.280730] ath11k_mac_op_hw_scan+0x1e9/0x2c0 [ath11k] [ 140.280763] drv_hw_scan+0x79/0x260 [mac80211] [ 140.280789] __ieee80211_scan_completed+0x379/0x440 [mac80211] [ 140.280816] ieee80211_scan_work+0x12f/0x330 [mac80211] [ 140.280830] process_one_work+0x279/0x5b0 [ 140.280842] worker_thread+0x49/0x300 [ 140.280854] ? process_one_work+0x5b0/0x5b0 [ 140.280868] kthread+0x135/0x150 [ 140.280880] ? __kthread_bind_mask+0x60/0x60 [ 140.280891] ret_from_fork+0x22/0x30 [ 140.280903] irq event stamp: 275961 [ 140.280918] hardirqs last enabled at (275960): [<ffffffff9b270f1f>] __local_bh_enable_ip+0x6f/0xb0 [ 140.280931] hardirqs last disabled at (275961): [<ffffffff9be13ca3>] _raw_spin_lock_irqsave+0x63/0x80 [ 140.280946] softirqs last enabled at (275944): [<ffffffffc055288d>] ath11k_ce_send+0x14d/0x260 [ath11k] [ 140.280958] softirqs last disabled at (275953): [<ffffffff9c000f72>] asm_call_irq_on_stack+0x12/0x20 [ 140.280971] ---[ end trace 31cb94e18d401398 ]--- Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606156046-24764-1-git-send-email-kvalo@codeaurora.org
2020-12-02wcn36xx: Send NULL data packet when exiting BMPSBryan O'Donoghue
This commit updates the BMPS exit path to be consistent with downstream in terms of exiting BMPS mode. Downstream sets the flag to send a NULL data frame to the host on exiting BMPS. This will tell the AP to send any queued frames to the STA immediately. Verified the relevant bit toggle in wireshark. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201120021403.2646574-2-bryan.odonoghue@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 18:44:08 +0000