aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-09-15mac80211: use nl80211 interface typesJohannes Berg
There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: convert SNMP_MIB to a direct commandDan Williams
And support setting both long and short retries independently. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15ath9k: Add RF kill supportVasanthakumar Thiagarajan
RF kill support is enabled when CONFIG_RFKILL is set. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15ath9k: Re-order functions in main.cVasanthakumar Thiagarajan
Some of the functions in main.c are re-ordered in such a way that all local functions are defined before mac80211 and pci callbacks. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: remove unused generic RESET commandDan Williams
The generic reset command is unused. Each interface type needs to handle the reset command differently since after reset, the firmware is dead and interface-specific mechanisms must be used to reinitialize the card. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15zd1211rw: make use of new regulatory_hint()Luis R. Rodriguez
This cleans up zd1211rw's own regulatory work, and makes use of the new cfg80211 regulatory_hint(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-09-11tg3: Fix DMA mapping leak in tigon3_dma_hwbug_workaround().David S. Miller
Noticed by Michael Chan. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-11libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.Anna Neal
iwconfig txpower can now be used to set tx power to fixed or auto. If set to auto the default firmware settings are used. The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams noted the command was no longer supported in firmware V9+. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: Added support for 3 antennasGuy Cohen
Added support for 3 antennas for Legacy, SISO and MIMO2. MIMO3 is still not supported yet. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: fix searching for best rate in new search columnGuy Cohen
This patch fixes a bug in Rate Scaling. When moving from SISO to MIMO we need to choose the lowest higher rate, instead of choosing the highest in MIMO. No doing this can lead to a high packet loss in the highest rate in MIMO, leading not to move MIMO although lower in MIMO could give a better TPT. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwl3945 : Code cleanupAbhijeet Kolekar
Simplify pass_packet_to_mac80211 code block. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11libertas: clear current command on card removalDan Williams
If certain commands were in-flight when the card was pulled or the driver rmmod-ed, cleanup would block on the work queue stopping, but the work queue was in turn blocked on the current command being canceled, which didn't happen. Fix that. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11rt2x00: Make rt2x00 LEDS invisible config optionIvo van Doorn
There isn't really a good reason to have the LED configuration options selectable per driver, lets make it default 'y' and make it depend on the NEW_LEDS and LEDS_CLASS interface. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11rt2x00: Make RFKILL enabled by defaultIvo van Doorn
RFKILL should be enabled for _all_ hardware whether or not they feature a rfkill button or not. Remove driver specific RFKILL configuration options and make the rt2x00lib version depend on CONFIG_RFKILL and defaulting to 'y' to make sure it will always be enabled when RFKILL was enabled. This also fixes some bugs where RFKILL wasn't initialized and didn't respond to RFKILL key presses. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11rt2x00: Revert "rt2x00: Fix the beacon length bug"Ivo van Doorn
This reverts: b93ce437eba7e0232683326f30d9d1167a872fad rt2x00: Fix the beacon length bug The workaround is no longer required since it has been correctly fixed in rt2x00usb now. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43legacy: Fix to enhance TX speedEhud Gavron
Recent changes in the specifications have improved the performance of the BCM4306/2 devices that use b43legacy as the driver. These "errors" in the specs have been present from the very first implementation of bcm43xx. Signed-off-by: Ehud Gavron <gavron@wetwork.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43legacy: Fix failure in rate-adjustment mechanismLarry Finger
A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.26], [2.6.25] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43: Remove QoS update workqueueMichael Buesch
We don't need the workqueue anymore, as we can now sleep in the callback. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43 G-PHY: Remove mmiowb()Michael Buesch
It causes compile errors on m68k and it is not needed. Remove it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43: Fix QoS defaultsMichael Buesch
This fixes the initialization of the default QoS parameters. This got broken by "wireless: fix warnings from QoS patch". Reported-by: Lorenzo Nava Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11p54: 802.11a 5GHz phy supportChristian Lamparter
This patch brings the 5GHz Phy in any prism54 devices (of course, only those who have one) to life. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11p54: control output power levelsChristian Lamparter
I hope this patch is enough to cover at least the basic requirements of IEEE 802.11h's TPC. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11p54: add lots of useful rx/tx statisticsChristian Lamparter
The firmware can provide lots of useful statistics about noise floor, mac time and lots of numbers about successful transfers and dropped frames. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11p54: add more rx filtersChristian Lamparter
This patch adds new filters settings to make the card more useful in monitor mode. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11p54: 32-bit tsf timestampsChristian Lamparter
tcpdump: 02:15:42.874518 61112184us tsft 48.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] CF +QoS Data IV 02:15:42.874557 >>>4356079526us<<< tsft 24.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] Acknowledgment 02:15:42.976844 61214513us tsft 1.0 Mb/s 2437 MHz (0x0480) antenna 0 [0x0000000e] Beacon as one can see on the huge jump, it's very plausible that firmware does not report the full 64-bit mac time, just the lower 32bit and some kinds of flags... Therefore if we want a useful timestamp we have to emulate the high bits. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: fix compile warningZhu Yi
The patch fixes compile warning for ‘iwl4965_hw_channel_switch’ defined but not used. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: remove uneeded declarationsEmmanuel Grumbach
This patch cleans up iwlwifi by removing uneeded declarations and removing uneeded symbol export reducing the namespace pollution. It also fixes some typos in comments. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: use the results from disconnected antenna algorithmGrumbach, Emmanuel
This patch makes usage of the results from disconnected antenna alg to know how many antennas are connected. It also synchronizes between the chain noise alg and the W/A that disables power management during association. All the antennas must be enables during the chain noise algorithm. Hence, power management is restored only after the completion of the algorithm. In the future, we will need to update the AP that we don't support MIMO if there is only one antenna connected. We also need to update the rate scaling algorithm. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11iwlwifi: rename ps_mode to sm_psRon Rindjunsky
This patch renames iwl_priv.ps_mode for clearer iwl_priv.current_ht_config.sm_ps (spatial multiplexing power save). Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: change MIMO_PS to SM_PSTomas Winkler
This patch follows 11n spec naming more rigorously replacing MIMO_PS with SM_PS (Spatial Multiplexing Power Save). (Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS", "iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS", and "iwlwifi: remove double definition of SM PS". -- JWL) Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11tg3: Use SKB DMA helper functions for TX.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-09bnx2x: EEH recovery fixYitchak Gertner
When EEH detects an i/o error it resets the device thus it cannot be accessed. In this case the driver needs to unload its interface only with OS, kernel and network stack but not with the device. After successful recovery, the driver can load normally. Signed-off-by: Yitchak Gertner <gertner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: net/mac80211/mlme.c
2008-09-08iwlwifi: enable packet injection for iwlagnStefanik Gábor
Handle station IDs of transmitted packets when in monitor mode, and remove the various anti-injection checks from the iwl4965 driver. This makes injection work on iwl4965 and iwl5000. Tested on both cards. Note: To inject management frames with encryption, HW crypto support must be disabled using the "swcrypto=1" modparam (or "swcrypto50=1" for iwl5000). Otherwise most management frames won't be transmitted. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: enable active scanning on active channelsAbhijeet Kolekar
This patch enables active scanning on active channels. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove bad language from the commentsTomas Winkler
This patch removes bad language in the comments in iwl-agn-rs.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: take a fresh set of supported rates at each cycleEmmanuel Grumbach
This patch fixes regression in iwlwifi IBSS rate scaling caused by the patch named "mac80211: eliminate IBSS warning in rate_lowest_index()" by Vladimir Koutny <vlado@work.ksp.sk>. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: fix host command header according the HW specTomas Winkler
This patch aligns definition of host command with the spec. The inaccuracies weren't critical though. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: allow association on radar channel in power saveEmmanuel Grumbach
This patch disables power save upon association and enables it back after association. This allows to associate to AP on a radar channel if power save is enabled. Radar and passive channels are not allowed for TX (required for association) unless RX is received but PS may close the radio and no RX will be received effectively failing association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: cleanup PCI register handlingTomas Winkler
This patch cleans up pci registers handling. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: fix strict_strtoul error checkingEmmanuel Grumbach
This patch fixes handling of strcit_strtoul return value "0 == sucess". Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: generic init calibrations frameworkTomas Winkler
This patch allows variable number of init calibrations and allows addition new HW. This patch also fixes critical bug. Only last calibration result was applied. On reception of one calibration result all the calibration was freed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove rfkill warning from iwl-ioTomas Winkler
The patch removes the warning since registers might be accessed also during rfkill. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: replace readl and writel with io/read/write/32Tomas Winkler
This patch replaces readl and writel with more cross platform ioread32 and iowrite32. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: use strict_strtoul instead of simple_strtoulTomas Winkler
This patch makes use of strict_srtoul in sysfs code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: avoid redundant iwl3945_get_active_dwell_timeAbhijeet Kolekar
iwl3945_get_active_dwell_time is called twice within the same context. The patch removes one instance. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: removed bg_post_associate workAbhijeet Kolekar
This patch removes bg_post_associate work. A direct call iwl3945_post_associate is made to avoid the waiting by userspace programs. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: replace association and beacon hooks with bss_info_changed cbAbhijeet Kolekar
Let mac80211 and bss_info_changed callback handle the association and beacon changes. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: fix unbalanced mutexAbhijeet Kolekar
The patch removes unlocking of mutex from post_associate. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 03:58:51 +0000