aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-11-02vmxnet3: must split too big fragmentsEric Dumazet
vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: jongman heo <jongman.heo@samsung.com> Tested-by: jongman heo <jongman.heo@samsung.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02cxgb4: Fix unable to get UP event from the LLDVipul Pandya
If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02bnx2x: fix HW initialization using fw 7.8.xDmitry Kravkov
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bonding: fix second off-by-one errornikolay@redhat.com
Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/active_slave; Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Note: Sorry for the second patch but I missed this one while checking the file. You can squash them into one patch. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bonding: fix off-by-one errornikolay@redhat.com
Fix off-by-one error because IFNAMSIZ == 16 and when this code gets executed we stick a NULL byte where we should not. How to reproduce: with CONFIG_CC_STACKPROTECTOR=y (otherwise it may pass by silently) modprobe bonding; echo 1 > /sys/class/net/bond0/bonding/mode; echo "AAAAAAAAAAAAAAAA" > /sys/class/net/bond0/bonding/primary; Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Disable FCoE for 57840 since not yet supported by FWDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix no link on 577xx 10G-baseTYaniv Rosner
Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix unrecognized SFP+ module after driver is loadedYaniv Rosner
When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix potential incorrect link speed provisionYaniv Rosner
Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Restore global registers back to default.Yaniv Rosner
Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix link down in 57712 following LFAYaniv Rosner
In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix 57810 1G-KR link against certain switches.Yaniv Rosner
Fix 1G KR link by restoring CL72 misc control register to default value rather than 0. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ixgbe: PTP get_ts_info missing software supportJacob Keller
This patch corrects the ethtool get_ts_info functon which did not state that software timestamping was supported, even though it is. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> CC: Stable <stable@vger.kernel.org> [3.5] Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for 3.7... The biggest portion of this is a pull request from Johannes Berg: "Please pull my mac80211.git tree per below to get a number of fixes. I have included a patch from Antonio to fix a memcpy overrun, Felix's patches for the antenna gain/tx power issues, a few mesh-related fixes from Javier for mac80211 and my own patches to not access data that might not be present in an skb at all as well as a patch (the duplicate IE check one) to make mac80211 forward-compatible with potential future spec extensions that use the same IE multiple times. It's a bit bigger than I'd like maybe, but I think all of these are worthwhile fixes at this point." In addition... Felix Fietkau fixes an ath9k use-after-free issue. Stanislaw Gruszka adds a valid value check to rt2800. Sven Eckelmann adds a check to only check a TID value in a BlockAck, for frames that could be either a BlockAck or a normal Ack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31vxlan: don't expire permanent entriesstephen hemminger
VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-30ath9k: Test for TID only in BlockAcks while checking tx statusSven Eckelmann
The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: stable@vger.kernel.org Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-30rt2800: validate step value for temperature compensationStanislaw Gruszka
Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k: fix stale pointers potentially causing access to free'd skbsFelix Fietkau
bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "This is what we usually expect at this stage of the game, lots of little things, mostly in drivers. With the occasional 'oops didn't mean to do that' kind of regressions in the core code." 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu. 3) Lost error code on return from _rtl_usb_receive(), from Christian Lamparter. 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka. 5) Release resources on error in pch_gbe driver, from Veaceslav Falico. 6) Default hop limit not set correctly in ip6_template_metrics[], fix from Li RongQing. 7) Gianfar PTP code requests wrong kind of resource during probe, fix from Wei Yang. 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin. 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni Shoua, Dotan Barak, and Uri Habusha. 10) usbnet leaks memory on TX path, fix from Hemant Kumar. 11) Use socket state test, rather than presence of FIN bit packet, to determine FIONREAD/SIOCINQ value. Fix from Eric Dumazet. 12) Fix cxgb4 build failure, from Vipul Pandya. 13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket info dumps. From Yuchung Cheng. 14) Fix leak of security path in kfree_skb_partial(). Fix from Eric Dumazet. 15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from Veaceslav Falico. 16) Fix MAINTAINERS file pattern for networking drivers, from Jean Delvare. 17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit. 18) VLAN device type change restriction is too strict, and should not trigger for the automatically generated vlan0 device. Fix from Jiri Pirko. 19) Make PMTU/redirect flushing work properly again in ipv4, from Steffen Klassert. 20) Fix memory corruptions by using kfree_rcu() in netlink_release(). From Eric Dumazet. 21) More qmi_wwan device IDs, from Bjørn Mork. 22) Fix unintentional change of SNAT/DNAT hooks in generic NAT infrastructure, from Elison Niven. 23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tilegx: fix some issues in the SW TSO support qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan net: usb: Fix memory leak on Tx data path net/mlx4_core: Unmap UAR also in the case of error flow net/mlx4_en: Don't use vlan tag value as an indication for vlan presence net/mlx4_en: Fix double-release-range in tx-rings bas_gigaset: fix pre_reset handling vhost: fix mergeable bufs on BE hosts gianfar_ptp: use iomem, not ioports resource tree in probe ipv6: Set default hoplimit as zero. NET_VENDOR_TI: make available for am33xx as well pch_gbe: fix error handling in pch_gbe_up() b43: Fix oops on unload when firmware not found mwifiex: clean up scan state on error mwifiex: return -EBUSY if specific scan request cannot be honored brcmfmac: fix potential NULL dereference Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation rt2x00: usb: fix reset resume rtlwifi: pass rx setup error code to caller ...
2012-10-26Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Small batch of fixes for 3.7: - Fix crash in error path in cxgb4 - Fix build error on 32 bits in mlx4 - Fix SR-IOV bugs in mlx4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails mlx4_core: Remove annoying debug messages from SR-IOV flow RDMA/cxgb4: Don't free chunk that we have failed to allocate IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF) IB/mlx4: Fix build error on platforms where UL is not 64 bits
2012-10-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-26tilegx: fix some issues in the SW TSO supportChris Metcalf
This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable@vger.kernel.org [v3.6] Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwanDan Williams
These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26net: usb: Fix memory leak on Tx data pathHemant Kumar
Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26net/mlx4_core: Unmap UAR also in the case of error flowDotan Barak
If a failure takes place during the EQ creation, we need to unmap the UAR memory block too. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Uri Habusha <urih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26net/mlx4_en: Don't use vlan tag value as an indication for vlan presenceMoni Shoua
The vlan tag can be zero. This is why it can't serve as an indication that packet requires VLAN header in the TX flow. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26net/mlx4_en: Fix double-release-range in tx-ringsJack Morgenstein
The QP range is reserved as a single block. However, when freeing the en resources, the tx-ring QPs are released both in mlx4_en_destroy_tx_ring (one at a time) and in mlx4_en_free_resources (as a block release). Fix by eliminating the one-at-a-time release in mlx4_en_destroy_tx_ring. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24gianfar_ptp: use iomem, not ioports resource tree in probeWei Yang
When using a 36 bit dtb file, the driver complains "resource busy". Investigating the source of the message leads one to the gianfar_ptp_probe function. Since the type of the device resource requested in this function is IORESOURCE_MEM, it should use "iomem_resource" instead of "ioports_resource". Signed-off-by: Wei Yang <Wei.Yang@windriver.com> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-canDavid S. Miller
Marc Kleine-Budde says: ==================== here are two patches for the v3.7 release cycle. A patch by Wolfgang Grandegger for the flexcan driver, which switches off a workaround on the imx6q that is not needed, because the hardware is not affected by that bug. And a patch by Stephane Grosjean which updates the pci device table for the peak pci sja1000 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24NET_VENDOR_TI: make available for am33xx as wellPeter Korsgaard
The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI visible for it as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24pch_gbe: fix error handling in pch_gbe_up()Veaceslav Falico
If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24b43: Fix oops on unload when firmware not foundLarry Finger
When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Markus Kanet <dvmailing@gmx.eu> Cc: Stable <stable@vger.kernel.org> [V3.3.0+ (the patch will need to be refactored)] Cc: Markus Kanet <dvmailing@gmx.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: clean up scan state on errorBing Zhao
De-reference and deallocate scan state on failure. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Tested-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24mwifiex: return -EBUSY if specific scan request cannot be honoredBing Zhao
Previous patch "mwifiex: return -EBUSY if scan request cannot.." corrected regular scan request only. There is another case for specific scan that needs the same handling. Also, removed !req_ssid check as it has already been validated by caller. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Ryan Cairns <rtc@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24brcmfmac: fix potential NULL dereferenceYuanhan Liu
Fix a samtch warnings catched by Fengguang's 0-DAY system: + drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571) Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"Felix Fietkau
This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd. This commit is reducing tx power by at least 10 db on some devices, e.g. the Buffalo WZR-HP-G450H. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24ath9k_htc: Add PID/VID for a Ubiquiti WiFiStationMohammed Shafi Shajakhan
Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter. One has an internal antenna, the other has an external antenna and name suffix EXT. They have separate USB ids and in distribution openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows: 0cf3 Atheros Communications, Inc. ... b002 Ubiquiti WiFiStation 802.11n [Atheros AR9271] b003 Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271] Add b002 Ubiquiti WiFiStation in the PID/VID list. Reported-by: Roger Price <ath9k@rogerprice.org> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rt2x00: usb: fix reset resumeStanislaw Gruszka
Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann <dh.herrmann@googlemail.com> Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rtlwifi: pass rx setup error code to callerChristian Lamparter
If _rtl_usb_receive fails, the device is probably not ready. Hence the error code should be passed to the caller, so it can react accordingly and notify the user. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boardsStephane Grosjean
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23can: flexcan: disable bus error interrupts for the i.MX6qWolfgang Grandegger
This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang <jason77.wang@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() failsDotan Barak
Fixed the resource cleanup to act correctly and prevent a kernel oops when mlx4_QUERY_ADAPTER() fails. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23mlx4_core: Remove annoying debug messages from SR-IOV flowOr Gerlitz
These debug prints left behind by commits c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests"), 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") and 993c401e2079 ("mlx4_core: Add IB port-state machine and port mgmt event propagation") make it pretty hard to actually use the mlx4_core debug messages when running in SRIOV/IB mode -- for example, the module load sequence of a device with one VF yielded 631 debug prints, with 408 of them being from this set. Let's just remove them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23pch_gbe: don't reset MAC_RX on FIFO overflowVeaceslav Falico
Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: don't re-set RX_FIFO_ERR flag in napi_pollVeaceslav Falico
If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: create functions for MAC_RX {en,dis}ableVeaceslav Falico
Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22qla3xxx: Ensure request/response queue addr writes to the registersJoe Jin
Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 03:55:15 +0000