aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-02-27iwlwifi: virtualize op_mode's set_hw_rf_killEmmanuel Grumbach
Export it as "hw_rf_kill" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's stop/start queueEmmanuel Grumbach
Export them as "queue_full" and "queue_not_full" notification. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's rxEmmanuel Grumbach
This is the op_mode's Rx handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize op_mode's free skbEmmanuel Grumbach
This handler allows the transport layer to free an skb from the op_mode. This can happen when the driver is stopped while Tx packets are pending in the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: use sparse compliant __aligned__ attributeEmmanuel Grumbach
Sparse prefers __aligned(sizeof(void *)); Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: virtualize the op_modeEmmanuel Grumbach
Define the op_mode as an interface with its ops. All the functions of the op_mode are "private", but its ops is made public in iwl-op-mode.h. The drv object starts the op_mode by using the start function in the public ops. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: rename iwl_remove to iwl_op_mode_dvm_stopEmmanuel Grumbach
iwl_remove stops the wifi flows, so rename. Moreover, we can possibly stop the wifi flows even if the driver is statically compiled in the kernel, so remove the __devexit pragma. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: drv object can release its own memoryEmmanuel Grumbach
Move that code to the iwl-drv.c Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: introducing the drv object's flowsEmmanuel Grumbach
Fetch the fw and spawn the op_mode. The op_mode that we need to fetch is determined from the fw file. Since the fw is fetched very early in the init flow, we can determine what op_mode to spawn. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move uCode flags handling to op_modeJohannes Berg
The uCode flags modification is op_mode dependent since the P2P config is an op-mode config. This also fixes P2P enabling: due to the uCode loading code shuffle moving the SKU check before the EEPROM was read it was always false and would always disable PAN/P2P. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: move content of iwl_probe to post fetch_fwEmmanuel Grumbach
This will allow to have different behavior depending on the fw. Different fw APIs require completely different implementation of the mac80211 APIs. Each of these implementations is called an op_mode. The current op_mode is called DVM which states for dual virtual MAC. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27iwlwifi: parse_tlv functions set the fw_version stringEmmanuel Grumbach
struct iwl_fw contains a string that describe the fw. This string is now set by the iwl_parse_*_firmware. This string is later used to update the cfg80211 data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-27rt2800pci: Fix 'Error - MCU request failed' during initializationJakub Kicinski
Bring MCU operations during device initialization to sync with legacy driver. This should fix following error: phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2800: Add documentation on MCU requestsJakub Kicinski
Add documentation on MCU communication, some of known commands and their arguments. Supplement command ids. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27iwlwifi: iwl-agn.h included twiceDanny Kukawka
drivers/net/wireless/iwlwifi/iwl-core.c included 'iwl-agn.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211_hwsim: correctly line up a multiline printkAntonio Quartulli
The second line of a printk statement must line up to the opening bracket. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27brcm80211: fmac: use correct firmware filenameRafał Miłecki
Also don't use so generic BRCMF_USB_FW_NAME as we may need different firmwares in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27brcm80211: fmac: fix a couple checking after dereference bugsDan Carpenter
There were two dereferencing before checking for NULL static checker complaints in this new file. The list cursor is never NULL so that check can be removed. I moved the other dereference after the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27net/wireless: ipw2x00: Use IW_HANDLER macro from linux/wireless.hStanislav Yakovlev
Use IW_HANDLER macro in ipw2100.c to declare wireless handlers. Note: ipw2200.c already uses it. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Cleanup mci.cSujith Manoharan
Cleanup whitespace, fix indentation and coding style. Also remove debug messages that were flooding the log. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: MCI whitespace/debug cleanupSujith Manoharan
This patch fixes indentation and the general coding style in ar9003_mci.c. Also, minimize the amount of debug log output generated by MCI. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Remove HW revision checksSujith Manoharan
They are not needed since MCI will be enabled only for AR9462 v2.0 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI reset routineSujith Manoharan
* Use a separate function to enable/disable OneStepLookAhead. * Remove unnecessary hardware SREV checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Modify ATH9K_BTCOEX_SUPPORTSujith Manoharan
ATH9K_BTCOEX_SUPPORT is now used by both ath9k and ath9k_htc to enable BT coexistence. Fix Kbuild to allow this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove ATH9K_HW_CAP_MCI checksSujith Manoharan
With the ability to remove BTCOEX support at compile time, these checks are no longer needed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove ATH_BTCOEX_CFG_NONE checksSujith Manoharan
Since BTCOEX code can be compiled out cleanly now, remove these checks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan
ath9k_htc can also make use of CONFIG_ATH9K_BTCOEX_SUPPORT to be compiled without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Init BTCOEX inside htc_drv_gpio.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Start/stop btcoex using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan
Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw to provide a clean way of compilation without BTCOEX support. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI function declarationsSujith Manoharan
This patch converts a few functions to static variants and removes extraneous declarations. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI bits from hw.hSujith Manoharan
This patch moves all the MCI-specific declarations that have been dumped unceremoniously in hw.h to ar9003_mci.h Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Cleanup MCI bits from ath9k_hw_reset()Sujith Manoharan
This patch moves all the MCI-specific code in the main reset function to helper functions. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Setup MCI calibration using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Handle MCI power state using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: Use a helper function to get MCI ISRSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize BTCOEX scheme using a helperSujith Manoharan
Setting up the required scheme can be done as part of the BTCOEX initialization path and it doesn't belong in ath9k_hw_fill_cap_info() anyway. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORTSujith Manoharan
This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally compile btcoex-related code in the driver core. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Calculate ampdu limit using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Process BTCOEX interrupts using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Use proper start/stop routines for BTCOEXSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Move BTCOEX init/deinit functions to gpio.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize MCI params using a helperSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Cleanup MCI init/deinit routinesSujith Manoharan
This patch simplifies the buffer allocation functions for MCI and removes unneeded memset calls. Also, a couple of unused variables are removed and a memory leak in DMA allocation is fixed. [ 1263.788267] WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:875 check_unmap+0x173/0x7e0() [ 1263.788273] ath9k 0000:06:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000071908000] [map size=512 bytes] [unmap size=256 bytes] [ 1263.788345] Pid: 774, comm: rmmod Tainted: G W O 3.3.0-rc3-wl #18 [ 1263.788348] Call Trace: [ 1263.788355] [<ffffffff8105110f>] warn_slowpath_common+0x7f/0xc0 [ 1263.788359] [<ffffffff81051206>] warn_slowpath_fmt+0x46/0x50 [ 1263.788363] [<ffffffff8125a713>] check_unmap+0x173/0x7e0 [ 1263.788368] [<ffffffff8123fc22>] ? prio_tree_left+0x32/0xc0 [ 1263.788373] [<ffffffff8125aded>] debug_dma_free_coherent+0x6d/0x80 [ 1263.788381] [<ffffffffa0701c3c>] ath_mci_cleanup+0x7c/0x110 [ath9k] [ 1263.788387] [<ffffffffa06f4033>] ath9k_deinit_softc+0x113/0x120 [ath9k] [ 1263.788392] [<ffffffffa06f55cc>] ath9k_deinit_device+0x5c/0x70 [ath9k] [ 1263.788397] [<ffffffffa0704934>] ath_pci_remove+0x54/0xa0 [ath9k] [ 1263.788401] [<ffffffff81267d06>] pci_device_remove+0x46/0x110 [ 1263.788406] [<ffffffff813102bc>] __device_release_driver+0x7c/0xe0 [ 1263.788410] [<ffffffff81310a00>] driver_detach+0xd0/0xe0 [ 1263.788414] [<ffffffff81310118>] bus_remove_driver+0x88/0xe0 [ 1263.788418] [<ffffffff813111c2>] driver_unregister+0x62/0xa0 [ 1263.788421] [<ffffffff812680c4>] pci_unregister_driver+0x44/0xc0 [ 1263.788427] [<ffffffffa0705015>] ath_pci_exit+0x15/0x20 [ath9k] [ 1263.788432] [<ffffffffa070a92d>] ath9k_exit+0x15/0x31 [ath9k] [ 1263.788436] [<ffffffff810b971c>] sys_delete_module+0x18c/0x270 [ 1263.788441] [<ffffffff81436edd>] ? retint_swapgs+0x13/0x1b [ 1263.788446] [<ffffffff812483be>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1263.788450] [<ffffffff814378e9>] system_call_fastpath+0x16/0x1b [ 1263.788453] ---[ end trace 3ab4d030ffde40d4 ]--- Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove AR9462 v1.0 supportSujith Manoharan
v1.0 chips are not available in the market. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27wireless: Fix typo in mac80211_hwsim.cMasanari Iida
Correct spelling "occured" to "occurred" in drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add RT5372 chipset supportJohn Li
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: avoid useless cast from (struct ath_rateset *) to (u8 *) and backPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rtlwifi: Fix breakage in debug functions when built as a moduleLarry Finger
Since commit 481b9606, it has not been possible to invoke debugging with any rtlwifi driver built as a module. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add VCO recalibrationJohn Li
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 16:50:43 +0000