aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-05-12iwlwifi: Fix frequency in rx_status fillEmmanuel Grumbach
This patch fixes a bug in RX path, the frequency was wrongly set in the ieee80211_rx_status. This bug led to an empty scan list in A band. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12zd1211rw: fix potential use-after-free bugJohannes Berg
zd_mac_tx_to_dev() could potentially free the skb, or hand it off to mac80211 which might free it. Hence, this code needs to get the usb pointer out of skb->cb before handing it off to that function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Clean up error handling of PCI queue DMA allocation.Ivo van Doorn
When, for some reason, the rt2x00pci module fails to allocate DMA memory for the queues, it tries to undo the complete initialization of the PCI device, including freeing of the irq. This results in the following error in dmesg, as the irq hadn't been requested yet: [ 78.123456] Trying to free already-free IRQ 17 Fix this by implementing proper error handling code, instead of just using the full uninitialization function. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Fix broken recover-on-error pathIvo van Doorn
During initialization the initialize() callback function in rt2x00pci and rt2x00usb will cleanup the mess they made. rt2x00lib shouldn't call uninitialize because the callback function already cleaned up _and_ the DEVICE_INITIALIZED isn't set which causes the rt2x00lib_uninitialize() to halt directly anyway. All that is required to be cleaned up by rt2x00lib is the queue, and that can be done by calling rt2x00queue_uninitialize() directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12rt2x00: Don't use pskb_expand_head()Ivo van Doorn
rt2x00pci allocates DMA for descriptor and data, rt61pci doesn't use this for the beacon, but it can use the descriptor part as temporary buffer instead of using pskb_expand_head(). Using this temporary buffer is obviously much better then reallocating the skb buffer... At the same time we can set the data length for the beacon queue at 0, to make sure no DMA is allocated for data (but just for the descriptor). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12iwlwifi: fix compile error when CONFIG_MAC80211_DEBUGFS is not selectedZhu Yi
Make iwl4965_lq_sta->drv available even without CONFIG_MAC80211_DEBUGFS. Signed-off-by: Yi Zhu <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12wavelan: avoid index past end of array if DEBUG_SHOW_UNUSED is definedJohn W. Linville
Reported by Daniel Marjamäki <danielm77@spray.se> here: http://bugzilla.kernel.org/show_bug.cgi?id=10588 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12prism54: fix regression with missing carrier in AP-modeLuis R. Rodriguez
This fixes a regression introduced by commit 7b463ced6 (prism54: set carrier flags correctly) which causes the device to come up without a carrier in AP-mode. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-12niu: Determine the # of ports from the card's VPD dataMatheos Worku
Determine the number of physical ports from the card's VPD data. Previous fix failed on Maramba platform which doesn't have the "board-model" property. This fix uses the "model" property which exists on all cards and Neptune based motherboards. cstyle cleanup included. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-05-08macvlan: Fix memleak on device removal/crash on module removalPatrick McHardy
As noticed by Ben Greear, macvlan crashes the kernel when unloading the module. The reason is that it tries to clean up the macvlan_port pointer on the macvlan device itself instead of the underlying device. A non-NULL pointer is taken as indication that the macvlan_handle_frame_hook is valid, when receiving the next packet on the underlying device it tries to call the NULL hook and crashes. Clean up the macvlan_port on the correct device to fix this. Signed-off-by; Patrick McHardy <kaber@trash.net> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-06e1000e: don't return half-read eeprom on errorKok, Auke
On a read error, e1000e might have returned uninitialized block of eeprom data back to userspace. The convention is that 0xff is "empty", so mark the entire eeprom as empty in case of an error. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06ucc_geth: Don't use RX clock as TX clock.Joakim Tjernlund
Commit 9fb1e350e16164d56990dde036ae9c0a2fd3f634, ucc_geth: use rx-clock-name and tx-clock-name device tree properties Introduced a typo that made the driver use the RX clock as TX clock, causing massive TX errors. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06cxgb3: Use CAP_SYS_RAWIO for firmwareAlan Cox
Otherwise theoretically at least CAP_NET_ADMIN Reload new firmware Wait.. Firmware patches kernel So it should be CAY_SYS_RAWIO - not that I suspect this is in fact a credible attack vector! Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06pcnet32: delete non NAPI code from driver.Don Fry
Delete the non-napi code from the driver and Kconfig. Tested x86_64. Apply at next open opportunity. Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06fs_enet: Fix a memory leak in fs_enet_mdio_probeScott Wood
There are more memory leaks in the !PPC_CPM_NEW_BINDING case, but that code will disappear soon along with arch/ppc. Reported by Daniel Marjamki <danielm77@spray.se> at http://bugzilla.kernel.org/show_bug.cgi?id=10591 Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06[netdrvr] eexpress: IPv6 fails - multicast problemsBruce Robson
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=10577 I was unable to access a computer containing an Intel EtherExpress 16 network card using IPv6. I traced this to failure of neighbour discovery. When I used an "ip -6 neigh add" command, on the computer attempting access, to insert a binding between the IPv6 address of the computer with the Intel EtherExpress 16 network card and the card's ethernet address, I was able to access that computer using IPv6. Neighbour discovery requires working multicast. The driver sources file eexpress.c contains an approximately 30 line function eexp_setup_filter used when loading multicast addresses. I found 3 problems in this function 1) It wrote the number of multicast addresses to the card instead of the number of bytes in the multicast addresses. 2) When loading multiple multicast addresses it loaded the first one provided multiple times instead of loading each one once. 3) The setting of pointer 'data' from 'dmi->dmi_addr' occured before the test for the error situation of 'dmi' being NULL. Correcting these problems allows the computer with the Intel EtherExpress 16 network card to found by IPv6 neighbour discovery. p.s. There is some information on the Intel EtherExpress 16 at http://www.intel.com/support/etherexpress/vintage/sb/cs-013500.htm Datasheet for the Intel 82586 ethernet controller used by the card http://www.datasheetcatalog.com/datasheets_pdf/8/2/5/8/82586.shtml Signed-off-by: Bruce Robson <bns_robson@hotmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-063c59x: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-063c980-TX needs EXTRA_PREAMBLEGunnar Larisch
The ethernet card 3c980-TX needs a mdio_sync() to initialize the ethernet properly. This is forced by adding an EXTRA_PREAMBLE to its drv_flags. Without this, the driver did not reconnect after a link loss. Signed-off-by: Gunnar Larisch <Gunnar.Larisch@gmx.de> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06Merge branch 'for-2.6.26' of ↵Jeff Garzik
git://git.farnsworth.org/dale/linux-2.6-mv643xx_eth into upstream
2008-05-06fix warning in drivers/net/appletalk/cops.cJeff Garzik
drivers/net/appletalk/cops.c: In function ‘cops_reset’: drivers/net/appletalk/cops.c:507: warning: comparison of distinct pointer types lacks a cast by replacing hand-woven msleep() with call to msleep() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06e1000e: Add support for BM PHYs on ICH9Bruce Allan
This patch adds support for the BM PHY, a new PHY model being used on ICH9-based implementations. This new PHY exposes issues in the ICH9 silicon when receiving jumbo frames large enough to use more than a certain part of the Rx FIFO, and this unfortunately breaks packet split jumbo receives. For this reason we re-introduce (for affected adapters only) the jumbo single-skb receive routine back so that people who do wish to use jumbo frames on these ich9 platforms can do so. Part of this problem has to do with CPU sleep states and to make sure that all the wake up timings are correctly we force them with the recently merged pm_qos infrastructure written by Mark Gross. (See http://lkml.org/lkml/2007/10/4/400). To make code read a bit easier we introduce a _IS_ICH flag so that we don't need to do mac type checks over the code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06uli526x: fix endianness issues in the setup frameAnton Vorontsov
This patch fixes uli526x driver's issues on a PowerPC boards: uli chip is unable to receive the packets. It appears that send_frame_filter prepares the setup frame in the endianness unsafe manner. On a big endian machines we should shift the address nibble by two bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06uli526x: initialize the hardware prior to requesting interruptsAnton Vorontsov
The firmware on MPC8610HPCD boards enables ULI ethernet and leaves it in some funky state before booting Linux. For drivers, it's always good idea to (re)initialize the hardware prior to requesting interrupts. This patch fixes the following oops: Oops: Kernel access of bad area, sig: 11 [#1] MPC86xx HPCD NIP: c0172820 LR: c017287c CTR: 00000000 [...] NIP [c0172820] allocate_rx_buffer+0x2c/0xb0 LR [c017287c] allocate_rx_buffer+0x88/0xb0 Call Trace: [df82bdc0] [c017287c] allocate_rx_buffer+0x88/0xb0 (unreliable) [df82bde0] [c0173000] uli526x_interrupt+0xe4/0x49c [df82be20] [c0045418] request_irq+0xf0/0x114 [df82be50] [c01737b0] uli526x_open+0x48/0x160 [df82be70] [c0201184] dev_open+0xb0/0xe8 [df82be80] [c0200104] dev_change_flags+0x90/0x1bc [df82bea0] [c035fab0] ip_auto_config+0x214/0xef4 [df82bf60] [c03421c8] kernel_init+0xc4/0x2ac [df82bff0] [c0010834] kernel_thread+0x44/0x60 Instruction dump: 4e800020 9421ffe0 7c0802a6 bfa10014 7c7e1b78 90010024 80030060 83e30054 2b80002f 419d0078 3fa0c039 48000058 <907f0010> 80630088 2f830000 419e0014 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06ucc_geth: Fix a bunch of sparse warningsAndy Fleming
ucc_geth didn't have anything marked as __iomem. It was also inconsistent with its use of in/out accessors (using them sometimes, not using them other times). Cleaning this up cuts the warnings down from hundreds to just over a dozen. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06phylib: Fix some sparse warningsAndy Fleming
Declared some things static, declared some things in the header. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06gianfar: Fix a locking bug in gianfar's sysfs codeAndy Fleming
During sparse cleanup, found a locking bug. Some of the sysfs functions were acquiring a lock, and then returning in the event of an error. We rearrange the code so that the lock is released in error conditions, too. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06bonding: fix enslavement error unwindsJay Vosburgh
As part of: commit c2edacf80e155ef54ae4774379d461b60896bc2e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Mon Jul 9 10:42:47 2007 -0700 bonding / ipv6: no addrconf for slaves separately from master two steps were rearranged in the enslavement process: netdev_set_master is now before the call to dev_open to open the slave. This patch updates the error cases and unwind process at the end of bond_enslave to match the new order. Without this patch, it is possible for the enslavement to fail, but leave the slave with IFF_SLAVE set in its flags. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06bonding: Deadlock between bonding_store_bonds and bond_destroy_sysfs.Pavel Emelyanov
The sysfs layer has an internal protection, that ensures, that all the process sitting inside ->sore/->show callback exits before the appropriate entry is unregistered (the calltraces are rather big, but I can provide them if required). On the other hand, bonding takes rtnl_lock in a) the bonding_store_bonds, i.e. in ->store callback, b) module exit before calling the sysfs unregister routines. Thus, the classical AB-BA deadlock may occur. To reproduce run # while :; do modprobe bonding; rmmod bonding; done and # while :; do echo '+bond%d' > /sys/class/net/bonding_masters ; done in parallel. The fix is to move the bond_destroy_sysfs out of the rtnl_lock, but _before_ bond_free_all to make sure no bonding devices exist after module unload. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06bonding: fix error unwind in bonding_store_bondsJay Vosburgh
Fixed an error unwind in bonding_store_bonds that didn't release the locks it held, and consolidated unwinds into a common block at the end of the function. Bug reported by Pavel Emelyanov <xemul@openvz.org>, who provided a different fix. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06bonding: Do not call free_netdev for already registered device.Pavel Emelyanov
If the call to bond_create_sysfs_entry in bond_create fails, the proper rollback is to call unregister_netdevice, not free_netdev. Otherwise - kernel BUG at net/core/dev.c:4057! Checked with artificial failures injected into bond_create_sysfs_entry. Pavel's original patch modified by Jay Vosburgh to move code around for clarity (remove goto-hopping within the unwind block). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-06iwlwifi: make IWLWIFI a tristateAdrian Bunk
IWLWIFI should be a tristate so that if IWLCORE and/or IWL3945 are m and none of them is y kbuild doesn't create an empty drivers/net/wireless/built-in.o This patch also removes the pointless "default n". Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05irda: fix !PNP support for drivers/net/irda/smsc-ircc2.cIngo Molnar
x86.git testing found this build bug on v2.6.26-rc1: ERROR: "pnp_get_resource" [drivers/net/irda/smsc-ircc2.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 the driver did not anticipate the case of !CONFIG_PNP which is rare but still possible. Instead of restricting the driver to PNP-only in the Kconfig space, add the (trivial) dummy struct pnp_driver - this is that other drivers use in the !PNP case too. The driver itself can in theory be initialized on !PNP too in certain cases, via smsc_ircc_legacy_probe(). Patch only minimally build tested, i dont have this hardware. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05irda: fix !PNP support in drivers/net/irda/nsc-ircc.cIngo Molnar
x86.git testing found the following build failure in latest -git: drivers/built-in.o: In function `nsc_ircc_pnp_probe': nsc-ircc.c:(.text+0xdf1b6): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1d4): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf1ee): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf237): undefined reference to `pnp_get_resource' nsc-ircc.c:(.text+0xdf24c): undefined reference to `pnp_get_resource' drivers/built-in.o:nsc-ircc.c:(.text+0xdf266): more undefined references to `pnp_get_resource' follow make: *** [.tmp_vmlinux1] Error 1 triggered via this config: http://redhat.com/~mingo/misc/config-Sat_May__3_20_53_13_CEST_2008.bad while generally most users will have PNP enabled, drivers can support non-PNP build mode too - and most drivers implement it. That is typically done by providing a dummy pnp_driver structure that will not probe anything. The fallback routines in the driver will handle this dumber mode of operation too. This patch implements that. I have not tested whether this actually works on real hardware so take care. It does resolve the build bug. [ Another solution that is used by a few drivers is to exclude the driver in the Kconfig if PNP is disabled, via "depends on PNP", but this would limit the availability of the driver needlessly. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04niu: Fix probing regression for maramba on-board chips.David S. Miller
Changeset 7f7c4072ea552f97a0898331322f71986a97299c ("niu: Determine the # of ports from the card's VPD data") caused maramba on-board NIU ports to stop probing properly. The old code had a fallback that would use a num_ports value of 4 if all the probing methods failed, but that was removed. This restores the fallback of 4 ports, to get things working again. Bump driver version and release date. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03lapbeth: Release ->ethdev when unregistering device.David S. Miller
Otherwise it leaks forever. Based upon a report by Roland <devzero@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Update version to 1.7.5.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Update RV2P firmware for 5709.Michael Chan
The new RV2P firmware fixes 2 issues: 1. The jumbo rx buffer page size is now configurable and set to the proper PAGE_SIZE. Before, it was assumed to be always 4K. 2. Driver sometimes would crash when receiving jumbo packets mixed with firmware management packets. This was caused by the old firmware DMA'ing to the wrong address. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Zero out context memory for 5709.Michael Chan
We should zero out the context memory for 5709 before each reset. When we resume after suspend for example, the memory may not be zero and the chip may not function correctly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix register test on 5709.Michael Chan
The register BNX2_CTX_STATUS (0x1004) should be skipped on 5709 as it contains reserved bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Fix remote PHY initial link state.Michael Chan
On some remote PHY blade systems, the driver receives no initial link interrupt. As a result, the GMII/MII MAC mode does not get setup properly. To fix this problem, we add an initial poll of the link state after chip reset. With this change, the setting of the initial carrier state in the init code can be eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02bnx2: Refine remote PHY locking.Michael Chan
bnx2_set_remote_link() should be called under bp->phy_lock to protect against concurrent polling and interrupt calls. This change is needed by the next patch which will add one initial poll of the remote PHY link status. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Update version to 3.92Matt Carlson
This patch updates the version number to 3.92. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Add link state reporting to UMP firmwareMatt Carlson
All variants of the 5714, 5715, and 5780 offer a feature called the "Universal Management Port". This feature is implemented in firmware and is largely transparent to the driver, except... It turns out that the UMP firmware needs to know the current status of the link. Because the firmware cannot touch the PHY registers while the driver is in control of the device, it needs the driver to report link status changes through an additional handshaking mechanism. Without this handshake, it has been observed in the field that the UMP firmware will not operate correctly. This patch implements the new handshake with the UMP firmware. Since the handshake uses the same mechanism ASF heartbeats use, code was added to detect and wait for completion of a pending previous event. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix ethtool loopback test for 5761 BX devicesMatt Carlson
A CPMU related loopback test bug existed for AX revisions of the 5761. While that errata has been fixed, the CPMU still slows down the core clock too far to run the loopback test successfully. This patch disables the CPMU LINK_SPEED mode just like we do with the AX revisions of the 5761 and all revisions of the 5784. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Fix 5761 NVRAM sizesMatt Carlson
The 5761 NVRAM sizes assigned to the nvram_size member are half as big as they should be. This patch corrects the NVRAM sizes and replaces the hardcoded constants with preprocessor constants for readability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02tg3: Use constant 500KHz MI clock on adapters with a CPMUMatt Carlson
The MI clock is not configured correctly on adapters with the CPMU present. The tg3 driver has code which statically sets the MI clock to be a fraction of the speed at which the core clock is running. However, the CPMU can change the adapter's core clock frequency based on operating conditions. Consequently, the MI will run slow when the core's clock has been slowed down. There is a new 500KHz constant frequency clock available on adapters with a CPMU. This patch removes the static core clock scaling and configures the MI clock to use this new 500KHz clock instead. Running the MI clock at slower speeds will not directly result in data corruption, but it does challenge the PHY read and write routine timeouts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-05-01rt2x00: Fix quality/activity led handlingIvo van Doorn
There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-01rt2x00: Don't enable short preamble for 1MBsIvo van Doorn
The timing settings for 1MBs should exclude the short preamble bit since that only applies to 2MBs, 5.5MBs and 11MBs. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 09:42:08 +0000