aboutsummaryrefslogtreecommitdiff
path: root/drivers/ntb
AgeCommit message (Collapse)Author
2015-07-04NTB: Add split BAR output for debugfs statsDave Jiang
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Change WARN_ON_ONCE to pr_warn_once on unsafeDave Jiang
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Print driver name and version in module initDave Jiang
Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Increase transport MTU to 64k from 16kDave Jiang
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rename Intel code names to platform namesDave Jiang
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Default to CPU memcpy for performanceDave Jiang
Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Improve performance with write combiningDave Jiang
Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory in Intel driverAllen Hubbe
Allocate memory for the NUMA node of the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory and DMA chan in transportAllen Hubbe
Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rate limit ntb_qp_link_workAllen Hubbe
When the ntb transport is connecting and waiting for the peer, the debug console receives lots of debug level messages about the remote qp link status being down. Rate limit those messages. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add tool test clientAllen Hubbe
This is a simple debugging driver that enables the doorbell and scratch pad registers to be read and written from the debugfs. This tool enables more complicated debugging to be scripted from user space. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add ping pong test clientAllen Hubbe
This is a simple ping pong driver that exercises the scratch pads and doorbells of the ntb hardware. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add parameters for Intel SNB B2B addressesAllen Hubbe
Add module parameters for the addresses to be used in B2B topology. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Reset transport QP link stats on downAllen Hubbe
Reset the link stats when the link goes down. In particular, the TX and RX index and count must be reset, or else the TX side will be sending packets to the RX side where the RX side is not expecting them. Reset all the stats, to be consistent. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Do not advance transport RX on link downAllen Hubbe
On link down, don't advance RX index to the next entry. The next entry should never be valid after receiving the link down flag. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Differentiate transport link down messagesAllen Hubbe
The same message "qp %d: Link Down\n" was printed at two locations in ntb_transport. Change the messages so they are distinct. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Check the device ID to set errata flagsDave Jiang
Set errata flags for the specific device IDs to which they apply, instead of the whole Xeon hardware class. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Enable link for Intel root port mode in probeDave Jiang
Link training should be enabled in the driver probe for root port mode. We should not have to wait for transport to be loaded for this to happen. Otherwise the ntb device will not show up on the transparent bridge side of the link. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Read peer info from local SPAD in transportDave Jiang
The transport was writing and then reading the peer scratch pad, essentially reading what it just wrote instead of exchanging any information with the peer. The transport expects the peer values to be the same as the local values, so this issue was not obvious. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Split ntb_hw_intel and ntb_transport driversAllen Hubbe
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add NTB hardware abstraction layerAllen Hubbe
Abstract the NTB device behind a programming interface, so that it can support different hardware and client drivers. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-02NTB: Move files in preparation for NTB abstractionAllen Hubbe
This patch only moves files to their new locations, before applying the next two patches adding the NTB Abstraction layer. Splitting this patch from the next is intended make distinct which code is changed only due to moving the files, versus which are substantial code changes in adding the NTB Abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-06-23Merge tag 'pci-v4.2-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.2 merge window: Enumeration - Move pci_ari_enabled() to global header (Alex Williamson) - Account for ARI in _PRT lookups (Alex Williamson) - Remove unused pci_scan_bus_parented() (Yijing Wang) Resource management - Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas) - Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas) - Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan) - Add pci_bus_addr_t (Yinghai Lu) PCI device hotplug - Wait for pciehp command completion where necessary (Alex Williamson) - Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki) - Check ignore_hotplug for all downstream devices (Rafael J. Wysocki) - Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki) - Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas) - Clean up pciehp debug logging (Bjorn Helgaas) Power management - Remove redundant PCIe port type checking (Yijing Wang) - Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang) - Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang) - Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas) - Simplify Clock Power Management setting (Bjorn Helgaas) Virtualization - Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus) MSI - Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin) - Remove unused pci_msi_off() (Bjorn Helgaas) - Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Drop pci_msi_off() calls during probe (Michael S. Tsirkin) APM X-Gene host bridge driver - Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang) - Add APM X-Gene PCIe MSI DTS nodes (Duc Dang) - Disable Configuration Request Retry Status for v1 silicon (Duc Dang) - Allow config access to Root Port even when link is down (Duc Dang) Broadcom iProc host bridge driver - Allow override of device tree IRQ mapping function (Hauke Mehrtens) - Add BCMA PCIe driver (Hauke Mehrtens) - Directly add PCI resources (Hauke Mehrtens) - Free resource list after registration (Hauke Mehrtens) Freescale i.MX6 host bridge driver - Add speed change timeout message (Troy Kisky) - Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas) Freescale Layerscape host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) - Factor out ls_pcie_establish_link() (Bjorn Helgaas) Marvell MVEBU host bridge driver - Remove mvebu_pcie_scan_bus() (Yijing Wang) NVIDIA Tegra host bridge driver - Remove tegra_pcie_scan_bus() (Yijing Wang) Synopsys DesignWare host bridge driver - Consolidate outbound iATU programming functions (Jisheng Zhang) - Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang) - Add support for x8 links (Zhou Wang) - Wait for link to come up with consistent style (Bjorn Helgaas) - Use pci_scan_root_bus() for simplicity (Yijing Wang) TI DRA7xx host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) Miscellaneous - Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas) - Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas) - Remove unused pcibios_select_root() (again) (Bjorn Helgaas) - Remove unused pci_dma_burst_advice() (Bjorn Helgaas) - xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)" * tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: pciehp: Inline the "handle event" functions into the ISR PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event() PCI: pciehp: Make queue_interrupt_event() void PCI: xgene: Allow config access to Root Port even when link is down PCI: xgene: Disable Configuration Request Retry Status for v1 silicon PCI: pciehp: Clean up debug logging x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing PCI: imx6: Add #define PCIE_RC_LCSR PCI: imx6: Use "u32", not "uint32_t" PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: imx6: Add speed change timeout message PCI/ASPM: Simplify Clock Power Management setting PCI: designware: Wait for link to come up with consistent style PCI: layerscape: Factor out ls_pcie_establish_link() PCI: layerscape: Use dw_pcie_link_up() consistently PCI: dra7xx: Use dw_pcie_link_up() consistently x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A PCI: pciehp: Wait for hotplug command completion where necessary PCI: Remove unused pci_dma_burst_advice() ...
2015-06-11ntb: initialize max_mw for Atom before using itDaniel Verkamp
Commit ab760a0 (ntb: Adding split BAR support for Haswell platforms) changed ntb_device's mw from a fixed-size array into a pointer that is allocated based on limits.max_mw; however, on Atom platforms, max_mw is not initialized until ntb_device_setup(), which happens after the allocation. Fill out max_mw in ntb_atom_detect() to match ntb_xeon_detect(); this happens before the use of max_mw in the ndev->mw allocation. Fixes a null pointer dereference on Atom platforms with ntb hardware. v2: fix typo (mw_max should be max_mw) Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-06-08ntb: iounmap MW reg and vbase in error pathJon Mason
The MW regbase and vbase(s) were not being freed if an error occurred in the vbase allocation loop. This is corrected by updating the error path for the allocation loop to err4. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-05-07ntb: Drop pci_msi_off() call during probeMichael S. Tsirkin
The PCI core now disables MSI and MSI-X for all devices during enumeration regardless of CONFIG_PCI_MSI. Remove device-specific code to disable MSI/MSI-X. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-10-17ntb: Adding split BAR support for Haswell platformsDave Jiang
On the Haswell platform, a split BAR option to allow creation of 2 32bit BARs (4 and 5) from the 64bit BAR 4. Adding support for this new option. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: use errata flag set via DID to implement workaroundDave Jiang
Instead of using a module parameter, we should detect the errata via PCI DID and then set an appropriate flag. This will be used for additional errata later on. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: conslidate reading of PPD to move platform detection earlierDave Jiang
To simplify some of the platform detection code. Move the platform detection to a function to be called earlier. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: move platform detection to separate functionDave Jiang
Move the platform detection function to separate functions to allow easier maintenence. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17NTB: debugfs device entryJon Mason
Create a debugfs entry for the NTB device to log the basic device info, as well as display the error count on a number of registers. Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-09-14ntb: Add alignment check to meet hardware requirementDave Jiang
The NTB translate register must have the value to be BAR size aligned. This alignment check make sure that the DMA memory allocated has the proper alignment. Another requirement for NTB to function properly with memory window BAR size greater or equal to 4M is to use the CMA feature in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and CONFIG_CMA_SIZE_MBYTES set. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-09-14NTB: correct the spread of queues over mw'sJon Mason
The detection of an uneven number of queues on the given memory windows was not correct. The mw_num is zero based and the mod should be division to spread them evenly over the mw's. Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07ntb: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07ntb: Split ntb_setup_msix() into separate BWD/SNB routinesAlexander Gordeev
This is an cleanup effort to make ntb_setup_msix() more readable - use ntb_setup_bwd_msix() to init MSI-Xs on BWD hardware and ntb_setup_snb_msix() - on SNB hardware. Function ntb_setup_snb_msix() also initializes MSI-Xs the way it should has been done - looping pci_enable_msix() until success or failure. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07ntb: Use pci_msix_vec_count() to obtain number of MSI-XsAlexander Gordeev
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07NTB: Code Style Clean-upJon Mason
Some white space and 80 char overruns corrected. Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07NTB: client event cleanupJon Mason
Provide a better event interface between the client and transport Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07ntb: Fix leakage of ntb_device::msix_entries[] arrayAlexander Gordeev
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07NTB: Fix typo in setting one translation registerRoland Dreier
In the code for Xeon devices in back-to-back mode with xeon_errata_workaround disabled, the downstream device puts the wrong value in SNB_B2B_XLAT_OFFSETL (SNB_MBAR01_DSD_ADDR vs. SNB_MBAR01_USD_ADDR). This was spotted while reading code, since the typo has no practical effect, at least for now: the low 32 bits of both constants are actually identical anyway. However, it's clearer and safer to use the right name. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-26Merge tag 'ntb-3.13' of git://github.com/jonmason/ntbLinus Torvalds
Pull non-transparent bridge updates from Jon Mason: "NTB driver bug fixes to address a missed call to pci_enable_msix, NTB-RP Link Up issue, Xeon Doorbell errata workaround, ntb_transport link down race, and correct dmaengine_get/put usage. Also, clean-ups to remove duplicate defines and document a hardware errata. Finally, some changes to improve performance" * tag 'ntb-3.13' of git://github.com/jonmason/ntb: NTB: Disable interrupts and poll under high load NTB: Enable Snoop on Primary Side NTB: Document HW errata NTB: remove duplicate defines NTB: correct dmaengine_get/put usage NTB: Fix ntb_transport link down race ntb: Fix missed call to pci_enable_msix() NTB: Fix NTB-RP Link Up NTB: Xeon Doorbell errata workaround
2013-11-20NTB: Disable interrupts and poll under high loadJon Mason
Disable interrupts and poll under high load Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: Enable Snoop on Primary SideJon Mason
Enable Snoop from Primary to Secondary side on BAR23 and BAR45 on all TLPs. Previously, Snoop was only enabled from Secondary to Primary side. This can have a performance improvement on some workloads. Also, make the code more obvious about how the link is being enabled. Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: Document HW errataJon Mason
Add a comment describing the necessary ordering of modifications to the NTB Limit and Base registers. Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: remove duplicate definesMichael Opdenacker
Remove duplicate defines in drivers/ntb/ntb_regs.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: correct dmaengine_get/put usageJon Mason
dmaengine_get() causes the initialization of the per-cpu channel tables. It needs to be called prior to dma_find_channel(). Initial version by Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: Fix ntb_transport link down raceJon Mason
A WARN_ON is being hit in ntb_qp_link_work due to the NTB transport link being down while the ntb qp link is still active. This is caused by the transport link being brought down prior to the qp link worker thread being terminated. To correct this, shutdown the qp's prior to bringing the transport link down. Also, only call the qp worker thread if it is in interrupt context, otherwise call the function directly. Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20ntb: Fix missed call to pci_enable_msix()Alexander Gordeev
Current MSI-X enablement code assumes MSI-Xs were successfully allocated in case less than requested vectors were available. That assumption is wrong, since MSI-Xs should be enabled with a repeated call to pci_enable_msix(). This update fixes this. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: Fix NTB-RP Link UpJon Mason
The Xeon NTB-RP setup, the transparent side does not get a link up/down interrupt. Since the presence of a NTB device on the transparent side means that we have a NTB link up, we can work around the lack of an interrupt by simply calling the link up function to notify the upper layers. Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20NTB: Xeon Doorbell errata workaroundJon Mason
Modifications to the 14th bit of the B2BDOORBELL register will not be mirrored to the remote system due to a hardware issue. To get around the issue, shrink the number of available doorbell bits by 1. The max number of doorbells was being used as a way to referencing the Link Doorbell bit. Since this would no longer work, the driver must now explicitly reference that bit. This does not affect the xeon_errata_workaround case, as it is not using the b2bdoorbell register. Signed-off-by: Jon Mason <jon.mason@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 07:38:48 +0000