| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fix from Jens Axboe:
"Single fix for an issue triggered with PROVE_RCU=y, with nvme using
the wrong iterators for an SRCU protected list"
* tag 'block-6.12-20241108' of git://git.kernel.dk/linux:
nvme/host: Fix RCU list traversal to use SRCU primitive
|
|
The code currently uses list_for_each_entry_rcu() while holding an SRCU
lock, triggering false positive warnings with CONFIG_PROVE_RCU=y
enabled:
drivers/nvme/host/core.c:3770 RCU-list traversed in non-reader section!!
While the list is properly protected by SRCU lock, the code uses the wrong
list traversal primitive. Replace list_for_each_entry_rcu() with
list_for_each_entry_srcu() to correctly indicate SRCU-based protection
and eliminate the false warning.
Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
|
|
This was previously fixed with commit 1147dd0503564fa0e0348
("nvme: fix error-handling for io_uring nvme-passthrough"), but the
change was mistakenly undone in a later commit.
Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user")
Cc: stable@vger.kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A recent commit enables integrity checks for formats the previous kernel
versions registered with the "nop" integrity profile. This means
namespaces using that format become unreadable when upgrading the kernel
past that commit.
Introduce a module parameter to restore the "nop" integrity profile so
that storage can be readable once again. This could be a boot device, so
the setting needs to happen at module load time.
Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes")
Reported-by: David Wei <dw@davidwei.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using
free lists and spinlock, and we can use an additional tag to
determine whether the nvmet_rdma_rsp is extra allocated.
In addition, performance has improved:
1. testing environment is local rxe rdma devie and mem-based
backstore device.
2. fio command, test the average 5 times:
fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1
-size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16
-iodepth=128 -bs=4k -group_reporting
3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") added a mutex_lock() call for the queue->queue_lock
in nvme_tcp_get_address(). However, the mutex_lock() races with
mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220
Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs]
CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:__mutex_lock+0xcf0/0x1220
Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1
RSP: 0018:ffff88811305f760 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341
R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058
FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn.cold+0x5b/0x1af
? __mutex_lock+0xcf0/0x1220
? report_bug+0x1ec/0x390
? handle_bug+0x3c/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? __mutex_lock+0xcf0/0x1220
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xd6a/0x59e0
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp]
nvme_sysfs_show_address+0x81/0xc0 [nvme_core]
dev_attr_show+0x42/0x80
? __asan_memset+0x1f/0x40
sysfs_kf_seq_show+0x1f0/0x370
seq_read_iter+0x2cb/0x1130
? rw_verify_area+0x3b1/0x590
? __mutex_lock+0x433/0x1220
vfs_read+0x6a6/0xa20
? lockdep_hardirqs_on+0x78/0x100
? __pfx_vfs_read+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
? __x64_sys_openat+0x105/0x1d0
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? __pfx_ksys_read+0x10/0x10
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? do_syscall_64+0x9f/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f9713f55cfa
Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b
RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa
RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011
RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148
R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0
</TASK>
The WARN is observed when the blktests test case nvme/014 is repeated
with tcp transport. It is rare, and 200 times repeat is required to
recreate in some test environments.
To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking
queue->queue_lock. The flag is cleared long time before the lock gets
destroyed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
When nvme passthru is configured using loop target, the clear_ids
attribute is, by default, set to true. This attribute would ensure that
EUID/NGUID/UUID is cleared for the loop passthru target.
The newer NVMe disk supporting the NVMe spec 1.3 or higher, typically,
implements the support for "Namespace Identification Descriptor list"
command. This command when issued from host returns EUID/NGUID/UUID
assigned to the inquired namespace. Not clearing these values, while
using nvme passthru using loop target, would result in NVMe host driver
rejecting the namespace. This check was implemented in the commit
2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique").
The fix implemented in this commit ensure that when host issues ns-id
descriptor list command, the EUID/NGUID/UUID are cleared by passthru
target. In fact, the function nvmet_passthru_override_id_descs() which
clears those unique ids already exits, so we just need to ensure that
ns-id descriptor list command falls through the corretc code path. And
while we're at it, we also combines the three passthru admin command
cases together which shares the same code.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
[<0>] folio_wait_bit_common+0x12a/0x310
[<0>] filemap_read_folio+0x97/0xd0
[<0>] do_read_cache_folio+0x108/0x390
[<0>] read_part_sector+0x31/0xa0
[<0>] read_lba+0xc5/0x160
[<0>] efi_partition+0xd9/0x8f0
[<0>] bdev_disk_changed+0x23d/0x6d0
[<0>] blkdev_get_whole+0x78/0xc0
[<0>] bdev_open+0x2c6/0x3b0
[<0>] bdev_file_open_by_dev+0xcb/0x120
[<0>] disk_scan_partitions+0x5d/0x100
[<0>] device_add_disk+0x402/0x420
[<0>] nvme_mpath_set_live+0x4f/0x1f0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x107/0x120 [nvme_core]
[<0>] nvme_alloc_ns+0xac6/0xe60 [nvme_core]
[<0>] nvme_scan_ns+0x2dd/0x3e0 [nvme_core]
[<0>] nvme_scan_work+0x1a3/0x490 [nvme_core]
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
|
|
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
|
|
Make the integrity mapping more like data mapping, blk_rq_map_sg. Use
the request to validate the segment count, and update the callers so
they don't have to.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913191746.2628196-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The request tracks the integrity segments already, so no need to recount
the segments again.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-8-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Provide a helper to keep the request flags and nr_integrity_segments in
sync with the bio's integrity payload. This is an integrity equivalent
to the normal data helper function, 'blk_rq_map_user()'.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.
The same Apple quirk is clearly not "temporary", so update the comment
while moving it.
Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme fabric driver calls the nvme_tls_key_lookup() function from
nvmf_parse_key() when the keyring is enabled, but this is broken in a
configuration with CONFIG_NVME_FABRICS=y and CONFIG_NVME_TCP=m because
this leads to the function definition being in a loadable module:
x86_64-linux-ld: vmlinux.o: in function `nvmf_parse_key':
fabrics.c:(.text+0xb1bdec): undefined reference to `nvme_tls_key_lookup'
Move the 'select' up to CONFIG_NVME_FABRICS itself to force this
part to be built-in as well if needed.
Fixes: 5bc46b49c828 ("nvme-tcp: check for invalidated or revoked key")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nsid values of 0xFFFFFFFE and 0XFFFFFFFF should be rejected with
a status code of "Invalid Namespace or Format".
See NVMe Base Specification, Active Namespace ID list (CNS 02h).
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The new stricter limits validation doesn't like a max_append_sectors value
to be set without BLK_FEAT_ZONED. Set it before allocation the disk to
fix this instead of just inheriting it later.
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On an NVMe namespace that does not support metadata, it is possible to
send an IO command with metadata through io-passthru. This allows issues
like [1] to trigger in the completion code path.
nvme_map_user_request() doesn't check if the namespace supports metadata
before sending it forward. It also allows admin commands with metadata to
be processed as it ignores metadata when bdev == NULL and may report
success.
Reject an IO command with metadata when the NVMe namespace doesn't
support it and reject an admin command if it has metadata.
[1] https://lore.kernel.org/all/mb61pcylvnym8.fsf@amazon.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Puranjay Mohan <pjy@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
On some TUXEDO platforms, a Samsung 990 Evo NVMe leads to a high
power consumption in s2idle sleep (2-3 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a
sleep with a lower power consumption, typically around 0.5 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a drive is unable to create IO queues on the initial probe, a
subsequent reset will need to allocate the tagset if IO queue creation
is successful. Without this, blk_mq_update_nr_hw_queues will crash on a
bad pointer due to the invalid tagset.
Fixes: eac3ef262941f62 ("nvme-pci: split the initial probe from the rest path")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Rename apptag and appmask to lbat and lbatm so that it matches the field
names used in NVMe spec.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When sending a RDMA_CM_REQUEST, the NVMe RDMA Transport Specification
allows you to populate the cntlid field in the RDMA_CM_REQUEST Private
Data.
The cntlid is returned by the target on completion of the first
RDMA_CM_REQUEST command (which creates the admin queue).
The cntlid field can then be populated by the host when the I/O queues
are created (using additional RDMA_CM_REQUEST commands), such that the
target can perform extra validation for additional RDMA_CM_REQUEST
commands.
This additional error code and error message is also added, such that
nvme_rdma_cm_msg() will display the proper error message if the target
fails the RDMA_CM_REQUEST command because of this extra validation.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe AER notification of a persistent internal error triggers a
reset. The existing warning message just says "due to AER", which can be
confused with the unrelated PCIe AER condition. Just say what the event
was instead of the generic overloaded acronym.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The sparse tool complains as follows:
drivers/nvme/target/debugfs.c:16:15: warning:
symbol 'nvmet_debugfs' was not declared. Should it be static?
This symbol is not used outside debugfs.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The "name" field in struct nvme_ctrl is unsued so removing it.
This would help save 12 bytes of space for each nvme_ctrl instance
created.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish().
Fixes: 3af755a46881 ("nvme: move nvme_stop_keep_alive() back to original position")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_check_ctrl_status() checks the authentication status, so
we don't need to do that prior to calling it.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
As we can set DH-HMAC-CHAP keys, we should also be
able to unset them.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a 'tls_keyring' attribute to display the contents of the
--keyring option from the connect string. Adding this attribute
allows us to recreate the original connect string from sysfs
settings.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a difference between the negotiated TLS key (which is
always present for a TLS encrypted connection) and the configured
TLS key (which is specified with the --tls_key command line option).
To differentate between these two add a new sysfs attribute
'tls_configured_key' to hold the specified on the command line.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
