aboutsummaryrefslogtreecommitdiff
path: root/drivers/nvme
AgeCommit message (Collapse)Author
2020-05-09nvme: define constants for identification valuesKeith Busch
Improve code readability by defining the specification's constants that the driver is using when decoding identification payloads. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Bart van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: align addrfam list to specChaitanya Kulkarni
With reference to the NVMeOF Specification (page 44, Figure 38) discovery log page entry provides address family field. We do set the transport type field but the adrfam field is not set when using loop transport and also it doesn't have support in the nvme-cli. So when reading discovery log page with a loop transport it leads to confusing output. As per the spec for adrfam value 254 is reserved for Intra Host Transport i.e. loopback), we add a required macro in the protocol header file, set default port disc addr entry's adrfam to NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for show/store attribute. Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get following output for nvme discover command from nvme-cli which is confusing. trtype: loop adrfam: ipv4 trtype: loop adrfam: ipv6 trtype: loop adrfam: infiniband trtype: loop adrfam: fibre-channel trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop adrfam: pci # <----- pci for loop trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " " adrfam: pci # <----- pci for unrecognized This patch fixes above output :- trtype: loop adrfam: ipv4 trtype: loop adrfam: ipv6 trtype: loop adrfam: infiniband trtype: loop adrfam: fibre-channel trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop adrfam: loop # <----- loop for loop trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " " adrfam: unrecognized # <----- unrecognized when invalid value Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: centralize port enable access for configfsChaitanya Kulkarni
The configfs attributes which are supposed to set when port is disable such as addr[addrfam|portid|traddr|treq|trsvcid|inline_data_size|trtype] has repetitive check and generic error message printing. This patch creates centralize helper to check and print an error message that also accepts caller as a parameter. This makes error message easy to parse for the user, removes the duplicate code and makes it available for futures such scenarios. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: use type-name map for address treqChaitanya Kulkarni
Currently nvmet_addr_treq_[store|show]() uses switch and if else ladder for address transport requirements to string and reverse mapping. With addtion of the generic nvmet_type_name_map structure we can get rid of the switch and if else ladder with string duplication. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: use type-name map for ana statesChaitanya Kulkarni
Now that we have a generic type to name map for configfs, get rid of the nvmet_ana_state_names structure and replace it with newly added nvmet_type_name_map. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: use type-name map for address familyChaitanya Kulkarni
Right now nvmet_addr_adrfam_[store|show]() uses switch and if else ladder for address family to string and reverse mapping which also repeats the strings in show and store function. With addition of generic nvmet_type_name_map structure we can now get rid of the switch and if else ladder and string duplication. Also, we add a newline in before found label in nvmet_addr_trtype_store() which keeps goto label code consistent with nvmet_allowed_hosts_drop_link(), nvmet_port_subsys_drop_link() and nvmet_ana_group_ana_state_store(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: add generic type-name mappingChaitanya Kulkarni
This patch adds a new type to name mapping generic structure. It replaces nvmet_transport_name with new generic mapping structure nvmet_transport. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-multipath: stop using ->queuedataChristoph Hellwig
nvme-multipath already uses the gendisk private data, not need to also set up the request_queue queuedata and use it in one place only. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-tcp: try to send request in queue_rq contextSagi Grimberg
Today, nvme-tcp automatically schedules a send request to a workqueue context, which is 1 more than we'd need in case the socket buffer is wide open. However, because we have async send activity (as a result of r2t, or write_space callbacks), we need to synchronize sends from possibly multiple contexts (ideally all running on the same cpu though). Thus, we only try to send directly from queue_rq in cases: 1. the send_list is empty 2. we can send it synchronously (i.e. not from the RX path) 3. we run on the same cpu as the queue->io_cpu to avoid contention on the send operation. Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-tcp: avoid scheduling io_work if we are already pollingSagi Grimberg
When the user runs polled I/O, we shouldn't have to trigger the workqueue to generate the receive work upon the .data_ready upcall. This prevents a redundant context switch when the application is already polling for completions. Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-tcp: use bh_lock in data_readySagi Grimberg
data_ready may be invoked from send context or from softirq, so need bh locking for that. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-pci: align io queue count with allocted nvme_queue in nvme_probeWeiping Zhang
Since commit 147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe"), nvme_alloc_queue does not alloc the nvme queues itself anymore. If the write/poll_queues module parameters are changed at runtime to values larger than the number of allocated queues in nvme_probe, nvme_alloc_queue will access unallocated memory. Add a new nr_allocated_queues member to struct nvme_dev to record how many queues were alloctated in nvme_probe to avoid using more than the allocated queues after a reset following a change to the write/poll_queues module parameters. Also add nr_write_queues and nr_poll_queues members to allow refreshing the number of write and poll queues based on a change to the module parameters when resetting the controller. Fixes: 147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe") Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> [hch: add nvme_max_io_queues, update the commit message] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-pci: remove last_sq_tailKeith Busch
The nvme driver does not have enough tags to wrap the queue, and blk-mq will no longer call commit_rqs() when there are no new submissions to notify. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-pci: remove volatile cqesKeith Busch
The completion queue entry is not volatile once the phase is confirmed. Remove the volatile keywords and check the phase using the appropriate READ_ONCE() accessor, allowing the compiler to optimize the remaining completion path. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: flush scan work on passthrough commandsKeith Busch
If a passthrough command causes the namespace inventory or capabilities to change, flush the scan work that handles these changes so the driver synchronizes with the user command's effects before returning the result to user space. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: clean up error handling in nvme_init_ns_headChristoph Hellwig
Use a common label for putting the nshead if needed and only convert nvme status codes for the one case where it actually is needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc: avoid gcc-10 zero-length-bounds warningArnd Bergmann
When CONFIG_ARCH_NO_SG_CHAIN is set, op->sgl[0] cannot be dereferenced, as gcc-10 now points out: drivers/nvme/host/fc.c: In function 'nvme_fc_init_request': drivers/nvme/host/fc.c:1774:29: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct scatterlist[0]' [-Wzero-length-bounds] 1774 | op->op.fcp_req.first_sgl = &op->sgl[0]; | ^~~~~~~~~~~ drivers/nvme/host/fc.c:98:21: note: while referencing 'sgl' 98 | struct scatterlist sgl[NVME_INLINE_SG_CNT]; | ^~~ I don't know if this is a legitimate warning or a false-positive. If this is just a false alarm, the warning is easily suppressed by interpreting the array as a pointer. Fixes: b1ae1a238900 ("nvme-fc: Avoid preallocating big SGL for data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet: add ns revalidation supportAnthony Iliopoulos
Add support for detecting capacity changes on nvmet blockdev and file backed namespaces. This allows for emulating and testing online resizing of nvme devices and filesystems on top. Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> [chaitanya: Fix comments posted on V1] Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [hch: reuse code a bit more] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: consolodate io settingsKeith Busch
The stream parameters indicating optimal io settings were just getting overwritten later. Rearrange the settings so the streams parameters can be preserved if provided. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: revalidate namespace stream parametersKeith Busch
The stream parameters are based on the currently formatted logical block size. Recheck these parameters on namespace revalidation so the registered constraints will be accurate. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: consolidate chunk_sectors settingsKeith Busch
Move the quirked chunk_sectors setting to the same location as noiob so one place registers this setting. And since the noiob value is only used locally, remove the member from struct nvme_ns. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: revalidate after verifying identifiersKeith Busch
If the namespace identifiers have changed, skip updating the disk information, as that will register parameters from a mismatched namespace. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-multipath: set bdi capabilities onceKeith Busch
The queues' backing device info capabilities don't change with each namespace revalidation. Set it only when each path's request_queue is initially added to a multipath queue. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: check namespace head shared propertyKeith Busch
Reject a new shared namespace if a duplicate unshared namespace exists. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: always search for namespace headKeith Busch
Even if a namespace reports it is not capable of sharing, search the subsystem for a matching namespace head. If found, the driver should reject that namespace since it's coming from an invalid configuration. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: release namespace head reference on errorKeith Busch
If a namespace identification does not match the subsystem's head for that NSID, release the reference that was taken when the matching head was initially found. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: unlink head after removing last namespaceKeith Busch
The driver had been unlinking the namespace head from the subsystem's list only after the last reference was released, and outside of the list's subsys->lock protection. There is no reason to track an empty head, so unlink the entry from the subsystem's list when the last namespace using that head is removed and with the mutex lock protecting the list update. The next namespace to attach reusing the previous NSID will allocate a new head rather than find the old head with mismatched identifiers. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: remove the magic 1024 constant in nvme_scan_ns_listChristoph Hellwig
Replace it with a value derived from the identify data and nsid sizes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: avoid an Identify Controller command for each namespace scanChristoph Hellwig
The namespace lists are 0-terminated, so we don't really need the NN value execept for the legacy sequential scan. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: factor out a nvme_ns_remove_by_nsid helperChristoph Hellwig
Factor out a piece of deeply indented and logicaly separate code from nvme_scan_ns_list into a new helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: clean up nvme_scan_workChristoph Hellwig
Move the check for the supported CNS value into nvme_scan_ns_list, and limit the life time of the identify controller allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: refine the Qemu Identify CNS quirkChristoph Hellwig
Add a helper to check if we can use Identify CNS values > 1, and refine the Qemu quirk to not apply to reported versions larger than 1.1, as the Qemu implementation had been fixed by then. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: slight cleanup for kbuild test warningsJames Smart
The kbuild tst robot flagged the following 3 issues: Case 1) >> drivers/nvme/target/fc.c:1201:37: warning: Either the condition >> '!assoc' is redundant or there is possible null pointer dereference: >> assoc. [nullPointerRedundantCheck] >> struct nvmet_fc_tgtport *tgtport = assoc->tgtport; ^ >> drivers/nvme/target/fc.c:1853:7: note: Assuming that condition '!assoc' >> is not redundant >> if (!assoc) ^ >> drivers/nvme/target/fc.c:1850:37: note: Assignment >> 'assoc=nvmet_fc_find_target_assoc(tgtport,be64_to_cpu( >> rqst->associd.association_id))', assigned value is 0 >> assoc = nvmet_fc_find_target_assoc(tgtport, ^ >> drivers/nvme/target/fc.c:1896:31: note: Calling function >> 'nvmet_fc_delete_target_assoc', 1st argument 'assoc' value is 0 >> nvmet_fc_delete_target_assoc(assoc); ^ The tool isn't smart enough to see that line 1854 sets a ret value which thereafter causes the routine to exit. This occurs before any of the assoc references, so it is not an issue. There are 2 more reportings of this same failure. To quiet the tool - rework the if test that does the exit to also reference assoc. No change in logic otherwise. Case 2) drivers/nvme/target/fc.c:1202:29: warning: The scope of the variable 'queue' can be reduced. [variableScope] struct nvmet_fc_tgt_queue *queue; ^ The tool is requesting the variable be declared within the code block that utilizes it. Ignoring this report as existing code style is fine. Case 3) drivers/nvme/target/fc.c:1137:16: warning: Variable 'needrandom' is assigned a value that is never used. [unreadVariable] needrandom = true; ^ Another parsing issue with the tool. Given that parens were not used with the list_for_each_entry() check, it inadvertantly thinks the break exited the outer while loop not the inner for loop. This is not an error. But, added parens to the inner list_for_each_entry() to quiet the tool and as it is better coding style. -- james Signed-off-by: James Smart <jsmart2021@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> CC: kbuild test robot <lkp@intel.com> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-rdma: use SRQ per completion vectorMax Gurtovoy
In order to save resource allocation and utilize the completion locality in a better way (compared to SRQ per device that exist today), allocate Shared Receive Queues (SRQs) per completion vector. Associate each created QP/CQ with an appropriate SRQ according to the queue index. This association will reduce the lock contention in the fast path (compared to SRQ per device solution) and increase the locality in memory buffers. Add new module parameter for SRQ size to adjust it according to the expected load. User should make sure the size is >= 256 to avoid lack of resources. Also reduce the debug level of "last WQE reached" event that is raised when a QP is using SRQ during destruction process to relief the log. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: remove unused parameterKeith Busch
nvme_alloc_ns_head() doesn't use the 'struct nvme_id_ns' parameter. Remove it, and update caller accordingly. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme: provide num dword helperKeith Busch
Various nvme commands use a zeroes based number of dwords field. Create a helper function to convert byte lengths to this format. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fcloop: add target to host LS request supportJames Smart
Add support for performing LS requests from target to host. Include sending request from targetport, reception into host, host sending ls rsp. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fcloop: refactor to enable target to host LSJames Smart
Currently nvmefc-loop only sends LS's from host to target. Slightly rework data structures and routine names to reflect this path. Allows a straight-forward conversion to be used by ls's from target to host. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: Add Disconnect Association Xmt supportJames Smart
As part of FC-NVME-2 (and ammendment on FC-NVME), the target is to send a Disconnect LS after an association is terminated and any exchanges for the association have been ABTS'd. The target is also not to send the receipt to any Disconnect Association LS, received to initiate the association termination or received while the association is terminating, until the Disconnect LS has been transmit. Add support for sending Disconnect Association LS after all I/O's complete (which is after ABTS'd certainly). Utilizes the new LLDD api to send ls requests. There is no need to track the Disconnect LS response or to retry after timeout. All spec requirements will have been met by waiting for i/o completion to initiate the transmission. Add support for tracking the reception of Disconnect Association and defering the response transmission until after the Disconnect Association LS has been transmit. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: rename ls_list to ls_rcv_listJames Smart
In preparation to add ls request support, rename the current ls_list, which is RCV LS request only, to ls_rcv_list. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: track hostport handle for associationsJames Smart
In preparation for sending LS requests for an association that terminates, save and track the hosthandle that is part of the LS's that are received to create associations. Support consists of: - Create a hostport structure that will be 1:1 mapped to a host port handle. The hostport structure is specific to a targetport. - Whenever an association is created, create a host port for the hosthandle the Create Association LS was received from. There will be only 1 hostport structure created, with all associations that have the same hosthandle sharing the hostport structure. - When the association is terminated, the hostport reference will be removed. After the last association for the host port is removed, the hostport will be deleted. - Add support for the new nvmet_fc_invalidate_host() interface. In the past, the LLDD didn't notify loss of connectivity to host ports - the LLD would simply reject new requests and wait for the kato timeout to kill the association. Now, when host port connectivity is lost, the LLDD can notify the transport. The transport will initiate the termination of all associations for that host port. When the last association has been terminated and the hosthandle will no longer be referenced, the new host_release callback will be made to the lldd. - For compatibility with prior behavior which didn't report the hosthandle: the LLDD must set hosthandle to NULL. In these cases, not LS request will be made, and no host_release callbacks will be made either. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: perform small cleanups on unneeded checksJames Smart
While code reviewing saw a couple of items that can be cleaned up: - In nvmet_fc_delete_target_queue(), the routine unlocks, then checks and relocks. Reorganize to avoid the unlock/relock. - In nvmet_fc_delete_target_queue(), there's a check on the disconnect state that is unnecessary as the routine validates the state before starting any action. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: add LS failure messagesJames Smart
Add LS reception failure messages Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc: Add Disconnect Association Rcv supportJames Smart
The nvme-fc host transport did not support the reception of a FC-NVME LS. Reception is necessary to implement full compliance with FC-NVME-2. Populate the LS receive handler, and specifically the handling of a Disconnect Association LS. The response to the LS, if it matched a controller, must be sent after the aborts for any I/O on any connection have been sent. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: Update target for common definitions for LS handlingJames Smart
Given that both host and target now generate and receive LS's create a single table definition for LS names. Each tranport half will have a local version of the table. Convert the target side transport to use the new common Create Association LS validation routine. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc: Update header and host for common definitions for LS handlingJames Smart
Given that both host and target now generate and receive LS's create a single table definition for LS names. Each tranport half will have a local version of the table. As Create Association LS is issued by both sides, and received by both sides, create common routines to format the LS and to validate the LS. Convert the host side transport to use the new common Create Association LS formatting routine. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc: convert assoc_active flag to bit opJames Smart
Convert the assoc_active boolean flag to a bitop on the flags field. The bit ops will provide atomicity. To make this change, the flags field was converted to a long type, which also affects the FCCTRL_TERMIO flag. Both FCCTRL_TERMIO and now ASSOC_ACTIVE flags are set/cleared by bit operations. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc: Ensure private pointers are NULL if no dataJames Smart
Ensure that when allocations are done, and the lldd options indicate no private data is needed, that private pointers will be set to NULL (catches driver error that forgot to set private data size). Slightly reorg the allocations so that private data follows allocations for LS request/response buffers. Ensures better alignments for the buffers as well as the private pointer. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvmet-fc: Better size LS buffersJames Smart
Current code uses NVME_FC_MAX_LS_BUFFER_SIZE (2KB) when allocating buffers for LS requests and responses. This is considerable overkill for what is actually defined. Rework code to have unions for all possible requests and responses and size based on the unions. Remove NVME_FC_MAX_LS_BUFFER_SIZE. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-09nvme-fc nvmet-fc: refactor for common LS definitionsJames Smart
Routines in the target will want to be used in the host as well. Error definitions should now shared as both sides will process requests and responses to requests. Moved common declarations to new fc.h header kept in the host subdirectory. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-23 13:43:06 +0000