| Age | Commit message (Collapse) | Author |
|---|
|
- Recognize disconnected devices so we don't bother trying to set them to
"frozen" or "normal" state (Christoph Hellwig)
- Clear PCI Status register during enumeration in case firmware left errors
logged (Kai-Heng Feng)
- Configure ECRC for every device, including hot-added ones (Stefan Roese)
- Keep AER error reporting enabled for switches (Stefan Roese)
- Enable error reporting for all devices that support AER (Stefan Roese)
- Iterate over error counters instead of error strings to avoid printing
junk in AER sysfs counters (Mohamed Khalfella)
* pci/err:
PCI/AER: Iterate over error counters instead of error strings
PCI/AER: Enable error reporting when AER is native
PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
PCI/AER: Configure ECRC for every device
PCI: Clear PCI_STATUS when setting up device
PCI/ERR: Recognize disconnected devices in report_error_detected()
|
|
Previously we iterated over AER stat *names*, e.g.,
aer_correctable_error_string[32], but the actual stat *counters* may not be
that large, e.g., pdev->aer_stats->dev_cor_errs[16], which means that we
printed junk in the sysfs stats files.
Iterate over the stat counter arrays instead of the names to avoid this
junk.
Also, added a build time check to make sure all
counters have entries in strings array.
Fixes: 0678e3109a3c ("PCI/AER: Simplify __aer_print_error()")
Link: https://lore.kernel.org/r/20220509181441.31884-1-mkhalfella@purestorage.com
Reported-by: Meeta Saggi <msaggi@purestorage.com>
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Meeta Saggi <msaggi@purestorage.com>
Reviewed-by: Eric Badger <ebadger@purestorage.com>
Cc: stable@vger.kernel.org
|
|
If we have native control of AER, set the following error reporting enable
bits:
- Correctable Error Reporting Enable
- Non-Fatal Error Reporting Enable
- Fatal Error Reporting Enable
- Unsupported Request Reporting Enable
Note that these bits are all in the Device Control register and are not
AER-specific.
This affects all devices with an AER capability, including hot-added
devices.
Please note that this change is quite invasive, as error reporting now will
be enabled for all available PCIe Endpoints, which was previously not the
case.
When "pci=noaer" is selected, error reporting stays disabled of course.
[bhelgaas: commit log, note error reporting is not AER-specific]
Link: https://lore.kernel.org/r/20220125071820.2247260-4-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
|
|
AER reporting is currently disabled in the DevCtl registers of all non Root
Port PCIe devices on systems using pcie_ports_native || host->native_aer,
disabling AER completely in such systems. This is because 2bd50dd800b5
("PCI: PCIe: Disable PCIe port services during port initialization"), added
a call to pci_disable_pcie_error_reporting() *after* the AER setup was
completed for the PCIe device tree.
Here a longer analysis about the current status of AER enabling /
disabling upon bootup provided by Bjorn:
pcie_portdrv_probe
pcie_port_device_register
get_port_device_capability
pci_disable_pcie_error_reporting
clear CERE NFERE FERE URRE # <-- disable for RP USP DSP
pcie_device_init
device_register # new AER service device
aer_probe
aer_enable_rootport # RP only
set_downstream_devices_error_reporting
set_device_error_reporting # self (RP)
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for RP
pci_walk_bus
set_device_error_reporting
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch
Port -> Endpoint hierarchy:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Enables Error Reporting for both Switch Ports,
- Does NOT enable Error Reporting for the Endpoint because it is not a
Root Port or Switch Port,
- Disables Error Reporting for the Switch Ports when pcie_portdrv_probe()
claims them. AER does not re-enable it because these are not Root
Ports.
Remove this call to pci_disable_pcie_error_reporting() from
get_port_device_capability(), leaving the already enabled AER configuration
intact. With this change, AER is enabled in the Root Port and the PCIe
switch upstream and downstream ports. Only the PCIe Endpoints don't have
AER enabled yet. A follow-up patch will take care of this Endpoint
enabling.
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization")
Link: https://lore.kernel.org/r/20220125071820.2247260-3-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
|
|
pcie_aspm_support_enabled() is used only by the acpi/pci_root.c driver,
which cannot be built as a module, so it does not need to be exported.
Unexport it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
pcie_aspm_pm_state_change() was introduced at the inception of PCIe ASPM
code, but it can cause some issues. For instance, when ASPM config is
changed via sysfs, those changes won't persist across power state change
because pcie_aspm_pm_state_change() overwrites them.
Also, if the driver restores L1SS [1] after system resume, the restored
state will also be overwritten by pcie_aspm_pm_state_change().
Remove pcie_aspm_pm_state_change(). If there's any hardware that really
needs it to function, a quirk can be used instead.
[1] https://lore.kernel.org/linux-pci/20220201123536.12962-1-vidyas@nvidia.com/
Link: https://lore.kernel.org/r/20220509073639.2048236-1-kai.heng.feng@canonical.com
[bhelgaas: remove additional pcie_aspm_pm_state_change() call in
pci_set_low_power_state(), added by
10aa5377fc8a ("PCI/PM: Split pci_raw_set_power_state()") and moved by
7957d201456f ("PCI/PM: Relocate pci_set_low_power_state()")]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Move pcie_set_ecrc_checking() to pci_aer_init() to make sure that
pcie_set_ecrc_checking() is called for each PCIe device, including
hot-added devices.
Link: https://lore.kernel.org/r/20220125071820.2247260-2-sr@denx.de
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
|
|
When a device is already unplugged by pciehp by the time the AER handler is
invoked, the PCIe device will already be in the pci_channel_io_perm_failure
state. In that case simply return PCI_ERS_RESULT_DISCONNECT instead of
trying to do a state transition that will fail.
Also untangle the state transition failure from the lack of methods to
improve the debugging output in case it happens again.
Link: https://lore.kernel.org/r/20220601074024.3481035-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
|
|
When a Root Port or Root Complex Event Collector receives an error Message
e.g., ERR_COR, it sets PCI_ERR_ROOT_COR_RCV in the Root Error Status
register and logs the Requester ID in the Error Source Identification
register. If it receives a second ERR_COR Message before software clears
PCI_ERR_ROOT_COR_RCV, hardware sets PCI_ERR_ROOT_MULTI_COR_RCV and the
Requester ID is lost.
In the following scenario, PCI_ERR_ROOT_MULTI_COR_RCV was never cleared:
- hardware receives ERR_COR message
- hardware sets PCI_ERR_ROOT_COR_RCV
- aer_irq() entered
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_COR_RCV
- hardware receives second ERR_COR message
- hardware sets PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq(): pci_write_config_dword(PCI_ERR_ROOT_STATUS, status)
- PCI_ERR_ROOT_COR_RCV is cleared; PCI_ERR_ROOT_MULTI_COR_RCV is set
- aer_irq() entered again
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq() exits because PCI_ERR_ROOT_COR_RCV not set
- PCI_ERR_ROOT_MULTI_COR_RCV is still set
The same problem occurred with ERR_NONFATAL/ERR_FATAL Messages and
PCI_ERR_ROOT_UNCOR_RCV and PCI_ERR_ROOT_MULTI_UNCOR_RCV.
Fix the problem by queueing an AER event and clearing the Root Error Status
bits when any of these bits are set:
PCI_ERR_ROOT_COR_RCV
PCI_ERR_ROOT_UNCOR_RCV
PCI_ERR_ROOT_MULTI_COR_RCV
PCI_ERR_ROOT_MULTI_UNCOR_RCV
See the bugzilla link for details from Eric about how to reproduce this
problem.
[bhelgaas: commit log, move repro details to bugzilla]
Fixes: e167bfcaa4cd ("PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215992
Link: https://lore.kernel.org/r/20220418150237.1021519-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
|
|
If a switch lacks ACS P2P Request Redirect, a device below the switch can
bypass the IOMMU and DMA directly to other devices below the switch, so
all the downstream devices must be in the same IOMMU group as the switch
itself.
The existing VFIO framework allows the portdrv driver to be bound to the
bridge while its downstream devices are assigned to user space. The
pci_dma_configure() marks the IOMMU group as containing only devices
with kernel drivers that manage DMA. Avoid this default behavior for the
portdrv driver in order for compatibility with the current VFIO usage.
We achieve this by setting ".driver_managed_dma = true" in pci_driver
structure. It is safe because the portdrv driver meets below criteria:
- This driver doesn't use DMA, as you can't find any related calls like
pci_set_master() or any kernel DMA API (dma_map_*() and etc.).
- It doesn't use MMIO as you can't find ioremap() or similar calls. It's
tolerant to userspace possibly also touching the same MMIO registers
via P2P DMA access.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220418005000.897664-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
|
|
- Update the aer-inject URL (Yicong Yang)
- Declare pci_filp_private only when HAVE_PCI_MMAP to avoid unused struct
definition (Krzysztof Wilczyński)
- Remove unused assignments (Bjorn Helgaas)
- Add #includes to asm/pci_x86.h to prevent build errors (Randy Dunlap)
* pci/misc:
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI/AER: Update aer-inject URL
|
|
The link to the aer-inject referenced leads to an empty repo and seems no
longer used. Replace it with the link mentioned in
Documentation/PCI/pcieaer-howto.rst.
Link: https://lore.kernel.org/r/20220115104921.21606-1-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add these PCI class codes to pci_ids.h:
PCI_CLASS_BRIDGE_PCI_NORMAL
PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE
Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.
[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009.
0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them. But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.
Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out
a better solution.
Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>
|
|
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking
for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead
of in host controller drivers, when transactions fail on PCI (Naveen
Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads
(Naveen Naidu)
* pci/errors:
PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: rockchip-host: Drop error data fabrication when config read fails
PCI: rcar-host: Drop error data fabrication when config read fails
PCI: altera: Drop error data fabrication when config read fails
PCI: mvebu: Drop error data fabrication when config read fails
PCI: aardvark: Drop error data fabrication when config read fails
PCI: kirin: Drop error data fabrication when config read fails
PCI: histb: Drop error data fabrication when config read fails
PCI: exynos: Drop error data fabrication when config read fails
PCI: mediatek: Drop error data fabrication when config read fails
PCI: iproc: Drop error data fabrication when config read fails
PCI: thunder: Drop error data fabrication when config read fails
PCI: Drop error data fabrication when config read fails
PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices
PCI: Set error response data when config read fails
PCI: Add PCI_ERROR_RESPONSE and related definitions
|
|
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups (Greg
Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat
Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
* pci/enumeration:
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
PCI/sysfs: Use default_groups in kobj_type for slot attrs
PCI: Convert pci_dev_present() stub to static inline
PCI: Use pci_find_vsec_capability() when looking for TBT devices
|
|
Some devices have an erratum such that they only support DWORD accesses to
some registers. E.g., this Bayhub O2 device ([VID:DID] = [0x1217:0x8621])
only supports DWORD accesses to LTR latency registers and L1 PM substates
control registers:
https://github.com/rajatxjain/public_shared/blob/main/OZ711LV2_appnote.pdf
The L1 PM substate control registers are DWORD sized, and hence their
access in the kernel is already DWORD sized, so we don't need to do
anything for them.
However, the LTR registers being WORD sized, are in need of a solution.
Convert the WORD sized accesses to these registers into DWORD sized
accesses while saving and restoring them.
Link: https://lore.kernel.org/r/20211222012105.3438916-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The struct aspm_latency is now used only inside pcie_aspm_check_latency().
Replace struct aspm_latency variables with u32 variables and remove struct
aspm_latency.
Link: https://lore.kernel.org/r/20211119193732.12343-5-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Previously we calculated the device's acceptable L0s and L1 exit latencies
in pcie_aspm_cap_init() and cached them in struct pcie_link_state.
These values are only used in pcie_aspm_check_latency() where they are
compared with the actual exit latencies of the link. This path is used
when removing or changing the D state of the device, so it's relatively low
frequency.
To reduce the amount of per-link data we store, remove the acceptable[]
arrays from struct pcie_link_state and calculate them directly from the
already-cached Device Capabilities register when needed.
[bhelgaas: use endpoint->devcap instead of reading it again]
Link: https://lore.kernel.org/r/20211119193732.12343-4-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Previously we calculated the upstream and downstream L0s and L1 exit
latencies of the link in pcie_aspm_cap_init() and cached them in struct
pcie_link_state.latency_*.
These values are only used in pcie_aspm_check_latency() where they are
compared with the acceptable latencies on the link. This path is used when
removing or changing the D state of the device, so it's relatively low
frequency.
To reduce the amount of per-link data we store, remove the latency_*
entries from struct pcie_link_state and calculate the latencies directly
where they are needed.
Link: https://lore.kernel.org/r/20211119193732.12343-3-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Move pci_function_0() earlier so we can use it from other functions.
Link: https://lore.kernel.org/r/20211119193732.12343-2-refactormyself@gmail.com
Signed-off-by: Bolarinwa O. Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When config pci_ops.read() can detect failed PCI transactions, the data
returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff).
Obviously a successful PCI config read may *also* return that data if a
config register happens to contain ~0, so it doesn't definitively indicate
an error unless we know the register cannot contain ~0.
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware. This unifies PCI error response checking and makes error
checks consistent and easier to find.
Compile tested only.
Link: https://lore.kernel.org/r/679ce049bccf10df3ca9ef4918ee2c3235afdaea.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When config pci_ops.read() can detect failed PCI transactions, the data
returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff).
Obviously a successful PCI config read may *also* return that data if a
config register happens to contain ~0, so it doesn't definitively indicate
an error unless we know the register cannot contain ~0.
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware. This unifies PCI error response checking and makes error
checks consistent and easier to find.
Compile tested only.
Link: https://lore.kernel.org/r/9b0632f1f183432149f495cf12bdd5a72cc597a4.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This reverts commit 2a4d9408c9e8b6f6fc150c66f3fef755c9e20d4a.
Robert reported a NULL pointer dereference caused by the PCI core
(local_pci_probe()) calling the i2c_designware_pci driver's
.runtime_resume() method before the .probe() method. i2c_dw_pci_resume()
depends on initialization done by i2c_dw_pci_probe().
Prior to 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of
pci_dev->driver"), pci_pm_runtime_resume() avoided calling the
.runtime_resume() method because pci_dev->driver had not been set yet.
2a4d9408c9e8 and b5f9c644eb1b ("PCI: Remove struct pci_dev->driver"),
removed pci_dev->driver, replacing it by device->driver, which *has* been
set by this time, so pci_pm_runtime_resume() called the .runtime_resume()
method when it previously had not.
Fixes: 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/
Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
- Tidy setup-irq.c comments (Pranay Sanghai)
- Fix misspellings (Krzysztof Wilczyński)
- Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński)
- Tidy cpqphp code formatting (Krzysztof Wilczyński)
- Remove unused pci_pool wrappers, which have been replaced by dma_pool
(Cai Huoqing)
- Remove a redundant initialization in __pci_reset_function_locked() (Colin
Ian King)
- Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński)
- Include generic <linux/> headers instead of <asm/> for cpqphp and vmd
(Krzysztof Wilczyński)
* pci/misc:
PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>
PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h>
MAINTAINERS: Update PCI subsystem information
PCI: Prefer 'unsigned int' over bare 'unsigned'
PCI: Remove redundant 'rc' initialization
PCI: Remove unused pci_pool wrappers
PCI: cpqphp: Format if-statement code block correctly
PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
PCI: hv: Remove unnecessary use of %hx
PCI: Correct misspelled and remove duplicated words
PCI: Tidy comments
|
|
- Check for CAP_SYS_ADMIN before validating sysfs user input, not after
(Krzysztof Wilczyński)
- Always return -EINVAL from sysfs "store" functions for invalid user input
instead of -EINVAL sometimes and -ERANGE others (Krzysztof Wilczyński)
- Use kstrtobool() directly instead of the strtobool() wrapper (Krzysztof
Wilczyński)
* pci/sysfs:
PCI: Use kstrtobool() directly, sans strtobool() wrapper
PCI/sysfs: Return -EINVAL consistently from "store" functions
PCI/sysfs: Check CAP_SYS_ADMIN before parsing user input
# Conflicts:
# drivers/pci/iov.c
|
|
- Don't setup portdrv IRQs if there are no port drivers that use them, to
conserve vectors and avoid spurious events (Jan Kiszka)
* pci/portdrv:
PCI/portdrv: Do not setup up IRQs if there are no users
|
|
- Ignore Link Down/Up caused by error-induced Hot Reset so endpoint driver
can remain bound to device during error recovery (Lukas Wunner)
- Remove unused resume err_handler (Lukas Wunner)
- Remove unused pcie_port_bus_{,un}register() declarations (Lukas Wunner)
- Skip compiling err.c when CONFIG_PCIEAER not set (Lukas Wunner)
* pci/hotplug:
PCI/ERR: Reduce compile time for CONFIG_PCIEAER=n
PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarations
PCI/portdrv: Remove unused resume err_handler
PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot Reset
PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()
|
|
Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.
Replace pci_dev->driver with to_pci_driver(). This is a step toward
removing pci_dev->driver.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The sole non-static function in err.c, pcie_do_recovery(), is only
called from:
* aer.c (if CONFIG_PCIEAER=y)
* dpc.c (if CONFIG_PCIE_DPC=y, which depends on CONFIG_PCIEAER)
* edr.c (if CONFIG_PCIE_EDR=y, which depends on CONFIG_PCIE_DPC)
Thus, err.c need not be compiled if CONFIG_PCIEAER=n.
Also, pci_uevent_ers() and pcie_clear_device_status(), which are called
from err.c, can be #ifdef'ed away unless CONFIG_PCIEAER=y.
Since x86_64_defconfig doesn't enable CONFIG_PCIEAER, this change may
slightly reduce compile time for anyone doing a test build with that
config.
Link: https://lore.kernel.org/r/98f9041151268c1c035ab64cca320ad86803f64a.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Commit c6c889d932bb ("PCI/portdrv: Remove pcie_port_bus_type link order
dependency") removed pcie_port_bus_{,un}register() but erroneously
retained their declarations in portdrv.h. Remove them as well.
Link: https://lore.kernel.org/r/7fd76b0591c37287ab94d911d8fd9ab9a2afcd16.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Commit 3e41a317ae45 ("PCI/AER: Remove unused aer_error_resume()")
removed the resume err_handler from AER. Since no other port service
implements the callback, support for it can be removed from portdrv.
It can be revived later if need be, preferably by re-using the
pcie_port_device_iter() iterator.
Link: https://lore.kernel.org/r/25334149b604e005058aeb0fdf51e01f991d5d74.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Keith Busch <kbusch@kernel.org>
|
|
Stuart Hayes reports that an error handled by DPC at a Root Port results
in pciehp gratuitously bringing down a subordinate hotplug port:
RP -- UP -- DP -- UP -- DP (hotplug) -- EP
pciehp brings the slot down because the Link to the Endpoint goes down.
That is caused by a Hot Reset being propagated as a result of DPC.
Per PCIe Base Spec 5.0, section 6.6.1 "Conventional Reset":
For a Switch, the following must cause a hot reset to be sent on all
Downstream Ports: [...]
* The Data Link Layer of the Upstream Port reporting DL_Down status.
In Switches that support Link speeds greater than 5.0 GT/s, the
Upstream Port must direct the LTSSM of each Downstream Port to the
Hot Reset state, but not hold the LTSSMs in that state. This permits
each Downstream Port to begin Link training immediately after its
hot reset completes. This behavior is recommended for all Switches.
* Receiving a hot reset on the Upstream Port.
Once DPC recovers, pcie_do_recovery() walks down the hierarchy and
invokes pcie_portdrv_slot_reset() to restore each port's config space.
At that point, a hotplug interrupt is signaled per PCIe Base Spec r5.0,
section 6.7.3.4 "Software Notification of Hot-Plug Events":
If the Port is enabled for edge-triggered interrupt signaling using
MSI or MSI-X, an interrupt message must be sent every time the logical
AND of the following conditions transitions from FALSE to TRUE: [...]
* The Hot-Plug Interrupt Enable bit in the Slot Control register is
set to 1b.
* At least one hot-plug event status bit in the Slot Status register
and its associated enable bit in the Slot Control register are both
set to 1b.
Prevent pciehp from gratuitously bringing down the slot by clearing the
error-induced Data Link Layer State Changed event before restoring
config space. Afterwards, check whether the link has unexpectedly
failed to retrain and synthesize a DLLSC event if so.
Allow each pcie_port_service_driver (one of them being pciehp) to define
a slot_reset callback and re-use the existing pm_iter() function to
iterate over the callbacks.
Thereby, the Endpoint driver remains bound throughout error recovery and
may restore the device to working state.
Surprise removal during error recovery is detected through a Presence
Detect Changed event. The hotplug port is expected to not signal that
event as a result of a Hot Reset.
The issue isn't DPC-specific, it also occurs when an error is handled by
AER through aer_root_reset(). So while the issue was noticed only now,
it's been around since 2006 when AER support was first introduced.
[bhelgaas: drop PCI_ERROR_RECOVERY Kconfig, split pm_iter() rename to
preparatory patch]
Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/
Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver")
Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de
Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.19+: ba952824e6c1: PCI/portdrv: Report reset for frozen channel
Cc: Keith Busch <kbusch@kernel.org>
|
|
Rename pm_iter() to pcie_port_device_iter() and make it visible outside
CONFIG_PM and portdrv_core.c so it can be used for pciehp slot reset
recovery.
[bhelgaas: split into its own patch]
Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/
Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Save the struct pci_driver pointer from pdev->driver instead of repeating
it several times. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Correct a number of misspelled words and remove any words that were
duplicated in the PCI tree. No change to functionality intended.
Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
strtobool() is a wrapper around kstrtobool() that has been added for
backward compatibility.
There is no reason to use the old API, so use kstrtobool() directly.
Related: ef951599074b ("lib: move strtobool() to kstrtobool()")
Link: https://lore.kernel.org/r/20210915230127.2495723-3-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Avoid registering service IRQs if there is no service that offers them
or no driver to register a handler against them. This saves IRQ vectors
when they are limited (e.g. on x86) and also avoids that spurious events
could hit a missing handler. Such spurious events need to be generated
by the Jailhouse hypervisor for active MSI vectors when enabling or
disabling itself.
Link: https://lore.kernel.org/r/8f9a13ac-8ab1-15ac-06cb-c131b488a36f@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Convert controller drivers to generic_handle_domain_irq() (Marc
Zyngier)
- Simplify VPD (Vital Product Data) access and search (Heiner
Kallweit)
- Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use
simplified VPD interfaces (Heiner Kallweit)
- Run Max Payload Size quirks before configuring MPS; work around
ASMedia ASM1062 SATA MPS issue (Marek Behún)
Resource management:
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
PCI device hotplug:
- Fix a double unmap in ibmphp (Vishal Aslot)
PCIe port driver:
- Enable Bandwidth Notification only if port supports it (Stuart
Hayes)
Sysfs/proc/syscalls:
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof
Wilczyński)
- Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński)
Virtualization:
- Extend "pci=noats" to also turn on Translation Blocking to protect
against some DMA attacks (Alex Williamson)
- Add sysfs mechanism to control the type of reset used between
device assignments to VMs (Amey Narkhede)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Allow HiSilicon AMBA devices that appear as fake PCI devices to use
PASID and SVA (Zhangfei Gao)
Endpoint framework:
- Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I)
- Zero-initialize endpoint test tool parameters so we don't use
random parameters (Shunyong Yang)
APM X-Gene PCIe controller driver:
- Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang)
Broadcom iProc PCIe controller driver:
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because
it's optional on BCMA devices (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
Cadence PCIe driver:
- Work around J7200 Link training electrical issue by increasing
delays in LTSSM (Nadeem Athani)
Intel IXP4xx PCI controller driver:
- Depend on ARCH_IXP4XX to avoid useless config questions (Geert
Uytterhoeven)
Intel Keembay PCIe controller driver:
- Add Intel Keem Bay PCIe controller (Srikanth Thokala)
Marvell Aardvark PCIe controller driver:
- Work around config space completion handling issues (Evan Wang)
- Increase timeout for config access completions (Pali Rohár)
- Emulate CRS Software Visibility bit (Pali Rohár)
- Configure resources from DT 'ranges' property to fix I/O space
access (Pali Rohár)
- Serialize INTx mask/unmask (Pali Rohár)
MediaTek PCIe controller driver:
- Add MT7629 support in DT (Chuanjia Liu)
- Fix an MSI issue (Chuanjia Liu)
- Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number
("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if
present (Chuanjia Liu)
Microsoft Hyper-V host bridge driver:
- Add ARM64 support (Boqun Feng)
- Support "Create Interrupt v3" message (Sunil Muthuswamy)
NVIDIA Tegra PCIe controller driver:
- Use seq_puts(), move err_msg from stack to static, fix OF node leak
(Christophe JAILLET)
NVIDIA Tegra194 PCIe driver:
- Disable suspend when in Endpoint mode (Om Prakash Singh)
- Fix MSI-X address programming error (Om Prakash Singh)
- Disable interrupts during suspend to avoid spurious AER link down
(Om Prakash Singh)
Renesas R-Car PCIe controller driver:
- Work around hardware issue that prevents Link L1->L0 transition
(Marek Vasut)
- Fix runtime PM refcount leak (Dinghao Liu)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK356X host controller driver (Simon Xue)
TI J721E PCIe driver:
- Add support for J7200 and AM64 (Kishon Vijay Abraham I)
Toshiba Visconti PCIe controller driver:
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro
Iwamatsu)
Xilinx NWL PCIe controller driver:
- Enable PCIe reference clock via CCF (Hyun Kwon)
Miscellaneous:
- Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET)
- Fix pci_dev_str_match_path() alloc while atomic bug (used for
kernel parameters that specify devices) (Dan Carpenter)
- Remove pointless Precision Time Management warning when PTM is
present but not enabled (Jakub Kicinski)
- Remove surplus "break" statements (Krzysztof Wilczyński)"
* tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits)
PCI: ibmphp: Fix double unmap of io_mem
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
PCI: Set dma-can-stall for HiSilicon chips
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
PCI: dwc: Remove surplus break statement after return
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI/portdrv: Enable Bandwidth Notification only if port supports it
PCI: Allow PASID on fake PCIe devices without TLP prefixes
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
...
|
|
- Add pci_numachip_init() declaration (Krzysztof Wilczyński)
- Allocate pci_dev_str_match_path() string atomically (Dan Carpenter)
- Drop error message when Precision Time Measurement supported but not
enabled (Jakub Kicinski)
- Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron)
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Make saved capability state private to core (Bjorn Helgaas)
- Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko)
- Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET)
* pci/misc:
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
PCI: Make saved capability state private to core
PCI: Add schedule point in proc_bus_pci_read()
PCI: Correct the pci_iomap.h header guard #endif comment
PCI/PTM: Remove error message at boot
PCI: Fix pci_dev_str_match_path() alloc while atomic bug
x86/PCI: Add pci_numachip_init() declaration
# Conflicts:
# include/linux/pci.h
|
|
- Cache PCIe Device Capabilities register (Amey Narkhede)
- Add pcie_reset_flr() with 'probe' argument (Amey Narkhede)
- Add pdev->reset_methods[] array to track reset method ordering (Amey
Narkhede)
- Remove reset_fn field from pci_dev (Amey Narkhede)
- Add sysfs interface to query and set device reset mechanism (Amey
Narkhede)
- Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni)
- Use acpi_pci_power_manageable() instead of duplicating logic (Shanker
Donthineni)
- Set ACPI fwnode early and at the same time with OF (Shanker Donthineni)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Change reset function 'probe' argument to bool (Amey Narkhede)
* pci/reset:
PCI: Change the type of probe argument in reset functions
PCI: Add support for ACPI _RST reset method
PCI: Setup ACPI fwnode early and at the same time with OF
PCI: Use acpi_pci_power_manageable()
PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION
PCI: Allow userspace to query and set device reset mechanism
PCI: Remove reset_fn field from pci_dev
PCI: Add array to track reset method ordering
PCI: Add pcie_reset_flr() with 'probe' argument
PCI: Cache PCIe Device Capabilities register
|
|
Previously we assumed that all Root Ports and Switch Downstream Ports
supported Link Bandwidth Notification. Per spec, this is only required
for Ports supporting Links wider than x1 and/or multiple Link speeds
(PCIe r5.0, sec 7.5.3.6).
Because we assumed all Ports supported it, we tried to set up a Bandwidth
Notification IRQ, which failed for devices that don't support IRQs at all,
which meant pcieport didn't attach to the Port at all.
Check the Link Bandwidth Notification Capability bit and enable the service
only when the Port supports it.
[bhelgaas: commit log]
Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/r/20210512213314.7778-1-stuart.w.hayes@gmail.com
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
|
|
Add a predicate that returns if PCIe PTM (Precision Time Measurement)
is enabled.
It will only return true if it's enabled in all the ports in the path
from the device to the root.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since 39850ed51062 ("PCI/PTM: Save/restore Precision Time Measurement
Capability for suspend/resume"), devices that have PTM capability but
don't enable it see this message on calls to pci_save_state():
no suspend buffer for PTM
Drop the message, it's perfectly fine not to use a capability.
Fixes: 39850ed51062 ("PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume")
Link: https://lore.kernel.org/r/20210811185955.3112534-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
|
|
Change the type of probe argument in functions which implement reset
methods from int to bool to make the context and intent clear.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr()
was an exception because it relied on a separate pcie_has_flr() function
instead of taking a "probe" argument.
Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove
pcie_has_flr().
Some pcie_flr() callers that did not use pcie_has_flr() remain.
[bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly]
Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
|
|
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński)
- Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof
Wilczyński)
- Fix 'resource_alignment' newline issues (Krzysztof Wilczyński)
- Add newline to 'devspec' sysfs file (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Add 'devspec' newline
PCI/sysfs: Fix 'resource_alignment' newline issues
PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s()
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
# Conflicts:
# drivers/pci/p2pdma.c
|
|
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to
driver (Lukas Wunner)
- Declare global cpci_debug in header file (Krzysztof Wilczyński)
* pci/hotplug:
PCI: cpcihp: Declare cpci_debug in header file
PCI: pciehp: Ignore Link Down/Up caused by DPC
|
