aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)Author
2021-07-09Revert "PCI: Coalesce host bridge contiguous apertures"Bjorn Helgaas
This reverts commit 65db04053efea3f3e412a7e0cc599962999c96b4. Guenter reported that after 65db04053efe, the ppc:sam460ex qemu emulation no longer boots from nvme: nvme nvme0: Device not ready; aborting initialisation, CSTS=0x0 nvme nvme0: Removing after probe failure status: -19 Link: https://lore.kernel.org/r/20210709231529.GA3270116@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-08Merge tag 'pci-v5.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-07-06Merge branch 'pci/resource'Bjorn Helgaas
- Coalesce host bridge apertures so we can allocate large BARs that cross contiguous apertures (Kai-Heng Feng) * pci/resource: PCI: Coalesce host bridge contiguous apertures
2021-06-14Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman
We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04PCI: Coalesce host bridge contiguous aperturesKai-Heng Feng
Built-in graphics on HP EliteDesk 805 G6 doesn't work because graphics can't get the BAR it needs: pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window] pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window] pci 0000:00:08.1: bridge window [mem 0xd2000000-0xd23fffff] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100401fffff 64bit pref] pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100303fffff 64bit pref] pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window However, the root bus has two contiguous apertures that can contain the child resource requested. Coalesce contiguous apertures so we can allocate from the entire contiguous region. [bhelgaas: fold in https://lore.kernel.org/r/20210528170242.1564038-1-kai.heng.feng@canonical.com] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013 Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210401131252.531935-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-27PCI: Print a debug message on PCI device releaseNiklas Schnelle
Commit 62795041418d ("PCI: enhance physical slot debug information") added a debug print on releasing the PCI slot and another message on destroying it. There is however no debug print on releasing the PCI device structure itself and even with closely looking at the kernel log during hotplug testing, I overlooked several missing pci_dev_put() calls for way too long. Add a debug print in pci_release_dev() making it much easier to spot when the PCI device structure is not released when it is supposed to be. Link: https://lore.kernel.org/r/20210311132312.2882425-1-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-27PCI: Add sysfs "removable" attributeRajat Jain
A PCI device is "external_facing" if it's a Root Port with the ACPI "ExternalFacingPort" property or if it has the DT "external-facing" property. We consider everything downstream from such a device to be removable by user. We're mainly concerned with consumer platforms with user accessible Thunderbolt ports that are vulnerable to DMA attacks, and we expect those ports to be identified by firmware as "ExternalFacingPort". Devices in traditional hotplug slots can technically be removed, but the expectation is that unless the port is marked with "ExternalFacingPort", such devices are less accessible to user / may not be removed by end user, and thus not exposed as "removable" to userspace. This can be used to implement userspace policies tailored for user removable devices. Eg usage: https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2591812 https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2795038 (code uses such an attribute to remove external PCI devices or disable features on them as needed by the policy desired) Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20210524171812.18095-2-rajatja@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-25PCI/MSI: Fix MSIs for generic hosts that use device-tree's "msi-map"Jean-Philippe Brucker
Since commit 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains"), platforms that rely on the "msi-map" device-tree property don't get MSIs anymore. On the Arm Fast Model for example [1], the host bridge doesn't have a "msi-parent" property since it doesn't itself generate MSIs, and so doesn't get a MSI domain. It has an "msi-map" property instead to describe MSI controllers of child devices. As a result, due to the new msi_domain check in pci_register_host_bridge(), the whole bus gets PCI_BUS_FLAGS_NO_MSI. Check whether the root complex has an "msi-map" property before giving up on MSIs. [1] arch/arm64/boot/dts/arm/fvp-base-revc.dts Fixes: 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains") Link: https://lore.kernel.org/r/20210510173129.750496-1-jean-philippe@linaro.org Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-05-04Merge branch 'remotes/lorenzo/pci/msi'Bjorn Helgaas
- Convert tegra to MSI domains (Marc Zyngier) - Use rcar controller address as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert rcar to MSI domains (Marc Zyngier) - Use xilinx port structure as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert xilinx to MSI domains (Marc Zyngier) - Remove unused Hyper-V msi_controller structure (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) * remotes/lorenzo/pci/msi: PCI: Refactor HT advertising of NO_MSI flag PCI/MSI: Document the various ways of ending up with NO_MSI PCI: mediatek: Advertise lack of built-in MSI handling PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains PCI/MSI: Let PCI host bridges declare their reliance on MSI domains PCI/MSI: Kill default_teardown_msi_irqs() PCI/MSI: Kill msi_controller structure PCI/MSI: Drop use of msi_controller from core code PCI: hv: Drop msi_controller structure PCI: xilinx: Convert to MSI domains PCI: xilinx: Don't allocate extra memory for the MSI capture address PCI: rcar: Convert to MSI domains PCI: rcar: Don't allocate extra memory for the MSI capture address PCI: tegra: Convert to MSI domains
2021-04-20PCI/MSI: Let PCI host bridges declare their reliance on MSI domainsMarc Zyngier
There is a whole class of host bridges that cannot know whether MSIs will be provided or not, as they rely on other blocks to provide the MSI functionnality, using MSI domains. This is the case for example on systems that use the ARM GIC architecture. Introduce a new attribute ('msi_domain') indicating that implicit dependency, and use this property to set the NO_MSI flag when no MSI domain is found at probe time. Link: https://lore.kernel.org/r/20210330151145.997953-11-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-20PCI/MSI: Drop use of msi_controller from core codeMarc Zyngier
As there is no driver using msi_controller, we can now safely remove its use from the PCI probe code. Link: https://lore.kernel.org/r/20210330151145.997953-8-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-23PCI: Release OF node in pci_scan_device()'s error pathDmitry Baryshkov
In pci_scan_device(), if pci_setup_device() fails for any reason, the code will not release device's of_node by calling pci_release_of_node(). Fix that by calling the release function. Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically") Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2020-12-15Merge branch 'pci/msi'Bjorn Helgaas
- Disable MSI for broken Pericom PCIe-USB adapter (Andy Shevchenko) - Move MSI/MSI-X init to msi.c (Bjorn Helgaas) - Move MSI/MSI-X flags updaters to msi.c (Bjorn Helgaas) - Warn if we assign 64-bit MSI address to device that only supports 32-bit MSI (Vidya Sagar) * pci/msi: PCI/MSI: Set device flag indicating only 32-bit MSI support PCI/MSI: Move MSI/MSI-X flags updaters to msi.c PCI/MSI: Move MSI/MSI-X init to msi.c PCI: Use predefined Pericom Vendor ID PCI: Disable MSI for Pericom PCIe-USB adapter
2020-12-15Merge branch 'pci/misc'Bjorn Helgaas
- Update kernel-doc to match function prototypes (Mauro Carvalho Chehab) - Bounds-check "pci=resource_alignment=" requests (Bjorn Helgaas) - Fix integer overflow in "pci=resource_alignment=" requests (Colin Ian King) - Remove unused HAVE_PCI_SET_MWI definition (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) * pci/misc: PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: Fix overflow in command-line resource alignment requests PCI: Bounds-check command-line resource alignment requests PCI: Fix kernel-doc markup # Conflicts: # drivers/pci/pci-driver.c
2020-12-15Merge branch 'pci/err'Bjorn Helgaas
- Stop writing AER Capability when we don't own it (Sean V Kelley) - Bind RCEC devices to the Port driver (Qiuxu Zhuo) - Cache the RCEC RA Capability offset (Sean V Kelley) - Add pci_walk_bridge() (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley) - Recover from RCiEP AER errors (Sean V Kelley) - Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) * pci/err: PCI/AER: Add RCEC AER error injection support PCI/PME: Add pcie_walk_rcec() to RCEC PME handling PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/ERR: Recover from RCiEP AER errors PCI/ERR: Add pcie_link_rcec() to associate RCiEPs PCI/ERR: Recover from RCEC AER errors PCI/ERR: Clear AER status only when we control AER PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities() PCI/ERR: Bind RCEC devices to the Root Port driver PCI/AER: Write AER Capability only when we control it
2020-12-04PCI/MSI: Move MSI/MSI-X init to msi.cBjorn Helgaas
Move pci_msi_setup_pci_dev(), which disables MSI and MSI-X interrupts, from probe.c to msi.c so it's with all the other MSI code and more consistent with other capability initialization. This means we must compile msi.c always, even without CONFIG_PCI_MSI, so wrap the rest of msi.c in an #ifdef and adjust the Makefile accordingly. No functional change intended. Link: https://lore.kernel.org/r/20201203185110.1583077-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2020-12-04PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities()Sean V Kelley
Extend support for Root Complex Event Collectors by decoding and caching the RCEC Endpoint Association Extended Capabilities when enumerating. Use that cached information for later error source reporting. See PCIe r5.0, sec 7.9.10. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-4-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-30PCI: Fix kernel-doc markupMauro Carvalho Chehab
Update kernel-doc so the names in the doc match the prototypes. Link: https://lore.kernel.org/r/f19caf7a68f8365c8b573a42b4ac89ec21925c73.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI: Decode PCIe 64 GT/s link speedGustavo Pimentel
PCIe r6.0, sec 7.5.3.18, defines a new 64.0 GT/s bit in the Supported Link Speeds Vector of Link Capabilities 2. This patch does not affect the speed of the link, which should be negotiated automatically by the hardware; it only adds decoding when showing the speed to the user. Decode this new speed. Previously, reading the speed of a link operating at this speed showed "Unknown speed" instead of "64.0 GT/s". Link: https://lore.kernel.org/r/aaaab33fe18975e123a84aebce2adb85f44e2bbe.1605739760.git.gustavo.pimentel@synopsys.com Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2020-10-21Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptrSaheed O. Bolarinwa
Save the L1 Substates Capability pointer in struct pci_dev. Then we don't have to keep track of it in the struct aspm_register_info and struct pcie_link_state, which makes the code easier to read. No functional change intended. [bhelgaas: split to a separate patch] Link: https://lore.kernel.org/r/20201015193039.12585-8-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-08PCI: Also call .add_bus() callback for root busRob Herring
Similar to pcibios_add_bus(), call pci_ops.add_bus() when the root bus is added. This allows host bridge drivers to do any setup requiring a bus pointer. There are currently no .add_bus() callbacks, so this is safe to do. Link: https://lore.kernel.org/r/20200821035420.380495-15-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-09-07PCI: Allow root and child buses to have different pci_opsRob Herring
PCI host bridges often have different ways to access the root and child bus config spaces. The host bridge drivers have invented their own abstractions to handle this. Let's support having different root and child bus pci_ops so these per driver abstractions can be removed. Link: https://lore.kernel.org/r/20200821035420.380495-2-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-08-05Merge branch 'pci/host-probe-refactor'Bjorn Helgaas
- Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Convert to devm_platform_ioremap_resource_byname() instead of open-coding platform_get_resource_byname() and devm_ioremap_resource() for altera, cadence, mediatek, rockchip, tegra, xgene (Dejin Zheng) - Convert to devm_platform_ioremap_resource() instead of open-coding platform_get_resource() and devm_ioremap_resource() for aardvark, brcmstb, exynos, ftpci100, versatile (Dejin Zheng) - Remove redundant error messages from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Drop useless PCI_ENABLE_PROC_DOMAINS from versatile driver (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Drop unnecessary zeroing of host bridge fields (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Use bridge resources instead of parsing DT 'ranges' again for cadence (Rob Herring) - Remove private bus number and range from cadence (Rob Herring) - Use devm_pci_alloc_host_bridge() to simplify rcar (Rob Herring) - Use struct pci_host_bridge.windows list directly rather than a temporary (Rob Herring) - Reduce OF "missing non-prefetchable window" from error to warning message (Rob Herring) - Convert rcar-gen2 from old Arm-specific pci_common_init_dev() to new arch-independent interfaces (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) * pci/host-probe-refactor: PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: of: Reduce missing non-prefetchable memory region to a warning PCI: rcar: Use struct pci_host_bridge.windows list directly PCI: rcar: Use devm_pci_alloc_host_bridge() PCI: cadence: Remove private bus number and range storage PCI: cadence: Use bridge resources for outbound window setup PCI: Move setting pci_host_bridge.busnr out of host drivers PCI: rcar: Use pci_is_root_bus() to check if bus is root bus PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx-nwl: Use pci_is_root_bus() to check if bus is root bus PCI: mobiveil: Use pci_is_root_bus() to check if bus is root bus PCI: designware: Use pci_is_root_bus() to check if bus is root bus PCI: aardvark: Use pci_is_root_bus() to check if bus is root bus PCI: Drop unnecessary zeroing of bridge fields PCI: Set default bridge parent device PCI: versatile: Drop flag PCI_ENABLE_PROC_DOMAINS PCI: controller: Remove duplicate error message PCI: controller: Convert to devm_platform_ioremap_resource() PCI: controller: Convert to devm_platform_ioremap_resource_byname() PCI: xilinx: Use pci_host_probe() to register host PCI: xilinx-nwl: Use pci_host_probe() to register host PCI: rockchip: Use pci_host_probe() to register host PCI: rcar: Use pci_host_probe() to register host PCI: iproc: Use pci_host_probe() to register host PCI: altera: Use pci_host_probe() to register host PCI: xgene: Use pci_host_probe() to register host PCI: versatile: Use pci_host_probe() to register host PCI: v3: Use pci_host_probe() to register host PCI: tegra: Use pci_host_probe() to register host PCI: mobiveil: Use pci_host_probe() to register host PCI: brcmstb: Use pci_host_probe() to register host PCI: host-common: Use struct pci_host_bridge.windows list directly PCI: mvebu: Use struct pci_host_bridge.windows list directly PCI: cadence: Use struct pci_host_bridge.windows list directly # Conflicts: # drivers/pci/controller/cadence/pcie-cadence-host.c
2020-08-04PCI: Move DT resource setup into devm_pci_alloc_host_bridge()Rob Herring
Now that pci_parse_request_of_pci_ranges() callers just setup pci_host_bridge.windows and dma_ranges directly and don't need the bus range returned, we can just initialize them when allocating the pci_host_bridge struct. With this, pci_parse_request_of_pci_ranges() becomes a static function. Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-29PCI: Announce device after early fixupsTiezhu Yang
Announce the device, e.g., pci 0000:00:00.0: [8086:5910] type 00 class 0x060000 after running early fixups, so the log message reflects any device type or class code fixups. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1595833615-8049-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-23PCI: Move setting pci_host_bridge.busnr out of host driversRob Herring
Most host drivers only parse the DT bus range to set the root bus number in pci_host_bridge.busnr. The ones that don't set busnr are buggy in that they ignore what's in DT. Let's set busnr in pci_scan_root_bus_bridge() where we already check for the bus resource and remove setting it in host drivers. Link: https://lore.kernel.org/r/20200722022514.1283916-12-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Will Deacon <will@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: linux-tegra@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org
2020-07-23PCI: Set default bridge parent deviceRob Herring
The host bridge's parent device is always the platform device. As we already have a pointer to it in the devres functions, let's initialize the parent device. Drivers can still override the parent if desired. Link: https://lore.kernel.org/r/20200722022514.1283916-3-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-10PCI: Treat "external-facing" devices themselves as internalRajat Jain
"External-facing" devices are internal devices that expose PCIe hierarchies such as Thunderbolt outside the platform [1]. Previously these internal devices were marked as "untrusted" the same as devices downstream from them. Use the ACPI or DT information to identify external-facing devices, but only mark the devices *downstream* from them as "untrusted" [2]. The external-facing device itself is no longer marked as untrusted. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports [2] https://lore.kernel.org/linux-pci/20200610230906.GA1528594@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20200707224604.3737893-3-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-10PCI: Cache ACS capability offset in deviceRajat Jain
Currently the ACS capability is being looked up at a number of places. Read and store it once at enumeration so that it can be used by all later. No functional change intended. Link: https://lore.kernel.org/r/20200707224604.3737893-2-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-04Merge branch 'pci/misc'Bjorn Helgaas
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas) - Check for platform_get_irq() failure consistently (Bjorn Helgaas) - Replace zero-length array with flexible-array (Gustavo A. R. Silva) - Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang) - Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun Lee) - Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang) - Rename _DSM constants to align with spec (Krzysztof Wilczyński) * pci/misc: PCI: Rename _DSM constants to align with spec PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove() x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port() PCI: Replace zero-length array with flexible-array PCI: Check for platform_get_irq() failure consistently driver core: platform: Clarify that IRQ 0 is invalid
2020-05-27PCI: Don't disable decoding when mmio_always_on is setJiaxun Yang
Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on. That would allow us quirk devices with junk in BARs but can't disable their decoding. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-14PCI: Program MPS for RCiEP devicesAshok Raj
Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge, so pci_configure_mps() previously ignored them, which may result in reduced performance. Instead, program the Max_Payload_Size of RCiEPs to the maximum supported value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also affects the subsequent programming of Max_Read_Request_Size because Linux programs MRRS based on the MPS value. Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to pci_configure_device()") Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2020-05-14PCI: Fix pci_host_bridge struct device release/free handlingRob Herring
The PCI code has several paths where the struct pci_host_bridge is freed directly. This is wrong because it contains a struct device which is refcounted and should be freed using put_device(). This can result in use-after-free errors. I think this problem has existed since 2012 with commit 7b5436635800 ("PCI: add generic device into pci_host_bridge struct"). It generally hasn't mattered as most host bridge drivers are still built-in and can't unbind. The problem is a struct device should never be freed directly once device_initialize() is called and a ref is held, but that doesn't happen until pci_register_host_bridge(). There's then a window between allocating the host bridge and pci_register_host_bridge() where kfree should be used. This is fragile and requires callers to do the right thing. To fix this, we need to split device_register() into device_initialize() and device_add() calls, so that the host bridge struct is always freed by using a put_device(). devm_pci_alloc_host_bridge() is using devm_kzalloc() to allocate struct pci_host_bridge which will be freed directly. Instead, we can use a custom devres action to call put_device(). Link: https://lore.kernel.org/r/20200513223859.11295-2-robh@kernel.org Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-05-14PCI: Fix pci_register_host_bridge() device_register() error handlingRob Herring
If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on. Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2020-05-14PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()Yicong Yang
Previously we used pcie_find_root_port() to find a Root Port from a PCIe device and pci_find_pcie_root_port() to find a Root Port from a Conventional PCI device. Unify the two functions and use pcie_find_root_port() to find a Root Port from either a Conventional PCI device or a PCIe device. Then there is no need to distinguish the type of the device. Link: https://lore.kernel.org/r/1589019568-5216-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # thunderbolt
2020-04-02Merge branch 'pci/enumeration'Bjorn Helgaas
- Add PCIe 32 GT/s speed decoding for sysfs "max_link_speed" and dmesg notes about available bandwidth (Yicong Yang) - Simplify and unify PCI bus/link speed reporting (Yicong Yang) * pci/enumeration: PCI: Add PCIE_LNKCAP2_SLS2SPEED() macro PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe strings PCI: Add pci_speed_string() PCI: Add 32 GT/s decoding in some macros
2020-03-28PCI/DPC: Add Error Disconnect Recover (EDR) supportKuppuswamy Sathyanarayanan
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-28PCI/DPC: Cache DPC capabilities in pci_init_capabilities()Kuppuswamy Sathyanarayanan
Since Error Disconnect Recover needs to use DPC error handling routines even if the OS doesn't have control of DPC, move the initalization and caching of DPC capabilities from the DPC driver to pci_init_capabilities(). Link: https://lore.kernel.org/r/5888380657c8b9551675b5dbd48e370e4fd2703d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-10PCI: Add pci_speed_string()Bjorn Helgaas
Add pci_speed_string() to return a text description of the supplied bus or link speed. The slot code previously used the private pci_bus_speed_strings[] array for this purpose, but adding this interface will enable us to consolidate similar code elsewhere. Export pcie_link_speed[] and pci_speed_string() so they can be used by modules. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-28Merge branch 'pci/trivial'Bjorn Helgaas
- Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski) * pci/trivial: PCI: Fix indentation PCI: Fix typos PCI: Remove useless comments and tidy others PCI: Remove unnecessary includes # Conflicts: # drivers/pci/probe.c
2019-11-28Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Unify ACS quirk implementations (Bjorn Helgaas) * pci/virtualization: PCI: Unify ACS quirk desired vs provided checking PCI: Make ACS quirk implementations more uniform PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes PCI: Add DMA alias quirk for Intel VCA NTB PCI: Fix Intel ACS quirk UPDCR register address PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL() PCI/ATS: Remove unused PRI and PASID stubs PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h PCI/ATS: Cache PRI PRG Response PASID Required bit PCI/ATS: Cache PASID Capability offset PCI/ATS: Cache PRI Capability offset PCI/ATS: Disable PF/VF ATS service independently PCI/ATS: Handle sharing of PF PASID Capability with all VFs PCI/ATS: Handle sharing of PF PRI Capability with all VFs PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-11-14PCI: Do not use bus number zero from EA capabilitySubbaraya Sundeep
As per PCIe r5.0, sec 7.8.5.2, fixed bus numbers of a bridge must be zero when no function that uses EA is located behind it. Hence, if EA supplies bus numbers of zero, assign bus numbers normally. A secondary bus can never have a bus number of zero, so setting a bridge's Secondary Bus Number to zero makes downstream devices unreachable. [bhelgaas: retain bool return value so "zero is invalid" logic is local] Fixes: 2dbce5901179 ("PCI: Assign bus numbers present in EA capability for bridges") Link: https://lore.kernel.org/r/1572850664-9861-1-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.2+
2019-10-23PCI: Warn if no host bridge NUMA node infoYunsheng Lin
In pci_call_probe(), we try to run driver probe functions on the node where the device is attached. If we don't know which node the device is attached to, the driver will likely run on the wrong node. This will still work, but performance will not be as good as it could be. On NUMA systems, warn if we don't know which node a PCI host bridge is attached to. This is likely an indication that ACPI didn't supply a _PXM method or the DT didn't supply a "numa-node-id" property. [bhelgaas: commit log, check bus node] Link: https://lore.kernel.org/r/1571467543-26125-1-git-send-email-linyunsheng@huawei.com Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-17PCI: Remove useless comments and tidy othersBjorn Helgaas
Remove useless comments and tidy others for better readability. Whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PASID Capability offsetKuppuswamy Sathyanarayanan
Previously each PASID interface searched for the PASID Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pasid_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/4957778959fa34eab3e8b3065d1951989c61cb0f.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-6-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 16:25:02 +0000