aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/cadence
AgeCommit message (Collapse)Author
2022-07-08phy: cadence-torrent: Remove unused `regmap` field from state structLars-Peter Clausen
The driver state struct for the sierra PHY driver has a field named `regmap` that is never referenced. Remove it since it is unused. Not that there are separate fields of type `struct regmap` for the individual sections of the device's register map. These other regmaps are used and not affected by the patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220707071722.44201-2-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08phy: cadence: Sierra: Remove unused `regmap` field from state structLars-Peter Clausen
The driver state struct for the sierra PHY driver has a field named `regmap` that is never referenced. Remove it since it is unused. Not that there are separate fields of type `struct regmap` for the individual sections of the device's register map. These other regmaps are used and not affected by the patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220707071722.44201-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: cdns-dphy: Add support for DPHY TX on J721eRahul T R
Add support new compatible for dphy-tx on j721e and implement dphy ops required. Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220623125433.18467-4-r-ravikumar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: cdns-dphy: Add band config for dphy txRahul T R
Add support for band ctrl config for dphy tx. Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220623125433.18467-3-r-ravikumar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-13phy: cadence: Sierra: Add TI J721E specific PCIe multilink lane configurationSwapnil Jakhade
This patch adds workaround for TI J721E errata i2183 (https://www.ti.com/lit/er/sprz455a/sprz455a.pdf). PCIe fails to link up if SERDES lanes not used by PCIe are assigned to another protocol. For example, link training fails if lanes 2 and 3 are assigned to another protocol while lanes 0 and 1 are used for PCIe to form a two lane link. This failure is due to an incorrect tie-off on an internal status signal indicating electrical idle. Status signals going from SERDES to PCIe Controller are tied-off when a lane is not assigned to PCIe. Signal indicating electrical idle is incorrectly tied-off to a state that indicates non-idle. As a result, PCIe sees unused lanes to be out of electrical idle and this causes LTSSM to exit Detect.Quiet state without waiting for 12ms timeout to occur. If a receiver is not detected on the first receiver detection attempt in Detect.Active state, LTSSM goes back to Detect.Quiet and again moves forward to Detect.Active state without waiting for 12ms as required by PCIe base specification. Since wait time in Detect.Quiet is skipped, multiple receiver detect operations are performed back-to-back without allowing time for capacitance on the transmit lines to discharge. This causes subsequent receiver detection to always fail even if a receiver gets connected eventually. The workaround only works for 1-lane PCIe configuration. This workaround involves enabling receiver detect override by setting TX_RCVDET_OVRD_PREG_j register of the lane running PCIe to 0x2. This causes SERDES to indicate successful receiver detect when LTSSM is in Detect.Active state, whether a receiver is actually present or not. If the receiver is present, LTSSM proceeds to link up as expected. However if receiver is not present, LTSSM will time out in Polling.Configuration substate since the expected training sequence packets will not be received. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20220303055026.24899-1-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-02phy: cadence: Add Cadence D-PHY Rx driverPratyush Yadav
The Cadence D-PHY can be configured in Tx (DSI) mode or Rx (CSI) mode. Both modes have a different programming sequence and share little among them. In addition, a PHY configured in Tx mode cannot be used in Rx mode and vice versa. For this reason, create a separate driver for the Rx mode to make it easier to read and maintain. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220301111621.2992275-2-p.yadav@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-25phy/cadence: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)
Use of_device_get_match_data() instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220214020626.1714696-1-chi.minghao@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-07phy: cadence: Sierra: Add support for skipping configurationAswath Govindraju
In some cases, a single SerDes instance can be shared between two different processors, each using a separate link. In these cases, the SerDes configuration is done in an earlier boot stage. Therefore, add support to skip reconfiguring, if it is was already configured beforehand. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220128072642.29188-1-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-01-24phy: cadence: Sierra: fix error handling bugs in probe()Dan Carpenter
There are two bugs in the error handling: 1: If devm_of_phy_provider_register() fails then there was no cleanup. 2: The error handling called of_node_put(child) improperly leading to a use after free. We are only holding the reference inside the loop so the last two gotos after the loop lead to a use after free bug. Fix this by cleaning up the partial allocations (or partial iterations) in the loop before doing the goto. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220115115146.GC7552@kili Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support for derived reference clock outputSwapnil Jakhade
Sierra has derived differential reference clock output which is sourced after the spread spectrum generation has been added. Add support to drive derived reference clock out of serdes. Model this derived clock as a "clock" so that platforms using this can enable it. Sierra Main LC VCO PLL divider 1 clock is programmed to output 100MHz clock output. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-16-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configurationSwapnil Jakhade
Add register sequences for PCIe + QSGMII PHY multilink configuration. PHY configuration for multi-link operation is done in two steps. e.g. Consider a case for a 4 lane PHY with PCIe using 2 lanes and QSGMII other 2 lanes. Sierra PHY has 2 PLLs, viz. PLLLC and PLLLC1. So in this case, PLLLC is used for PCIe and PLLLC1 is used for QSGMII. PHY is configured in two steps as described below. [1] For first step, the register values are selected as [TYPE_PCIE][TYPE_QSGMII][ssc]. This will configure PHY registers associated for PCIe involving PLLLC registers and registers for first 2 lanes of PHY. [2] In second step, the register values are selected as [TYPE_QSGMII][TYPE_PCIE][ssc]. This will configure PHY registers associated for QSGMII involving PLLLC1 registers and registers for other 2 lanes of PHY. This completes the PHY configuration for multilink operation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-14-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support for PHY multilink configurationsSwapnil Jakhade
Add support for multilink configuration of Sierra PHY. Currently, maximum two links are supported. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-13-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Fix to get correct parent for mux clocksSwapnil Jakhade
Fix get_parent() callback to return the correct index of the parent for PLL_CMNLC1 clock. Add a separate table of register values corresponding to the parent index for PLL_CMNLC1. Update set_parent() callback accordingly. Fixes: 28081b72859f ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)") Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-12-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Update single link PCIe register configurationSwapnil Jakhade
Add single link PCIe register configurations for no SSC and internal SSC. Also, add missing PMA lane registers for external SSC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-11-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operationSwapnil Jakhade
PIPE phy status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-10-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Check cmn_ready assertion during PHY power onSwapnil Jakhade
Check if PMA cmn_ready is set indicating the startup process is complete. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-9-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add PHY PCS common register configurationsSwapnil Jakhade
Add PHY PCS common register configuration sequences for single link. Update single link PCIe register sequence accordingly. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-8-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra ↵Swapnil Jakhade
documentation No functional change. Rename some regmap variables as mentioned in Sierra register description documentation. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-7-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Add support to get SSC type from device treeSwapnil Jakhade
Add support to get SSC type from DT. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-6-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Prepare driver to add support for multilink configurationsSwapnil Jakhade
Sierra driver currently supports single link configurations only. Prepare driver to support multilink multiprotocol configurations along with different SSC modes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-27phy: cadence: Sierra: Use of_device_get_match_data() to get driver dataSwapnil Jakhade
Use of_device_get_match_data() to get driver data instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20211223060137.9252-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: cadence-torrent: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Link: https://lore.kernel.org/r/20211104065233.1833499-1-yang.guang5@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Add support to output received reference clockSwapnil Jakhade
Add support to output received reference clock. Model the received reference clock as an alternate parent of reference clock driver clock. When received refclk is selected to output on cmn_refclk_p/m, this is the internal reference clock driven on the pma_cmn_refclk_int. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-5-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Model reference clock driver as a clock to enable ↵Swapnil Jakhade
derived refclk When reference clock driver is enabled, either derived or received refclk is output on cmn_refclk_p/m. Update the reference clock driver implementation by modelling reference clock driver as a "clock" with derived reference clock set as its default parent. The support for received reference clock will be added in a separate patch. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: cadence-torrent: Migrate to clk_hw based registration and OF APIsSwapnil Jakhade
Use clk_hw based provider APIs to register clks to remove the usage of deprecated APIs. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210922123735.21927-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Check PIPE mode PHY status to be ready for operationSwapnil Jakhade
PIPE PHY status is used to communicate the completion of several PHY functions. Check if PHY is ready for operation while configured for PIPE mode during startup. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-10-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Add debug information for PHY configurationSwapnil Jakhade
Add debug information in probe regarding PHY configuration parameters like single link or multilink protocol along with number of lanes used for each protocol link. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-9-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Add separate functions for reusable codeSwapnil Jakhade
Torrent PHY driver currently supports single link DP configuration. Prepare driver to support multilink DP configurations by adding separate functions for common initialization sequence. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210728145454.15945-8-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clockSwapnil Jakhade
Add PHY configuration registers for single link DP with 100MHz reference clock and NO_SSC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-7-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Add PHY registers for DP in array formatSwapnil Jakhade
Add PHY registers for single link DP in array format to simplify code and to improve readability. This supports already supported frequencies for DP of 19.2MHz and 25MHz. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-6-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Configure PHY registers as a function of input ↵Swapnil Jakhade
reference clock rate Torrent PHY supports multiple serdes standards with different input reference clock frequencies. PHY register values differ based on the reference clock rate. Add PHY input reference clock frequency as a new dimension to select proper register configuration. No functional change is intended. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-5-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Add enum for supported input reference clock frequenciesSwapnil Jakhade
Torrent PHY supports different input reference clock frequencies. Register configurations will be different based on reference clock value. Prepare driver to support such multiple reference clock frequencies. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210728145454.15945-4-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Reorder few functions to remove function declarationsSwapnil Jakhade
Reorder some functions to avoid function declarations. No functional change. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210728145454.15945-3-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-17phy: cadence-torrent: Remove use of CamelCase to fix checkpatch CHECK messageSwapnil Jakhade
Script checkpatch with --strict option gives message: CHECK: Avoid CamelCase: <REF_CLK_19_2MHz> CHECK: Avoid CamelCase: <REF_CLK_25MHz> Fix this by removing CamelCase usage. No functional change. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210728145454.15945-2-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()Wang Wensheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Link: https://lore.kernel.org/r/20210517015749.127799-1-wangwensheng4@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Add delay for PIPE clock to be stableKishon Vijay Abraham I
The Torrent spec specifies delay of 660.5us after phy_reset is asserted by the controller. To be on the safe side provide a delay of 5ms to 10ms in ->phy_on() callback where the SERDES is already configured in bootloader. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210330110138.24356-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Explicitly request exclusive reset controlKishon Vijay Abraham I
No functional change. Since the reset controls obtained in Torrent is exclusively used by the Torrent device, use exclusive reset control request API calls. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-5-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Do not configure SERDES if it's already configuredKishon Vijay Abraham I
Do not configure torrent SERDES if it's already configured. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Group reset APIs and clock APIsKishon Vijay Abraham I
No functional change intended. Group reset APIs and clock APIs in preparation for adding support to skip configuration if the SERDES is already configured by bootloader. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210330110138.24356-3-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Enable pll_cmnlc and pll_cmnlc1 clocksKishon Vijay Abraham I
Get pll_cmnlc and pll_cmnlc1 optional clocks and enable them. This will enable REFRCV/1 in case the pll_cmnlc/1 takes input from REFRCV/1 respectively. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-14-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)Kishon Vijay Abraham I
Sierra has two PLLs, PLL_CMNLC and PLL_CMNLC1 and each of these PLLs has two inputs, plllc_refclk (input from pll0_refclk) and refrcv (input from pll1_refclk). Model PLL_CMNLC and PLL_CMNLC1 as clocks so that it's possible to select one of these two inputs from device tree. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-13-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Add missing clk_disable_unprepare() in .remove callbackKishon Vijay Abraham I
commit 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") enabled the clock in probe and failed to disable in remove callback. Add missing clk_disable_unprepare() in cdns_sierra_phy_remove(). Fixes: 44d30d622821 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210319124128.13308-11-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Add array of input clocks in "struct cdns_sierra_phy"Kishon Vijay Abraham I
Instead of having separate structure members for each input clock, add an array for the input clocks within "struct cdns_sierra_phy". This is in preparation for adding more input clocks required for supporting additional clock combination. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-10-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence-torrent: Use a common header file for Cadence SERDESKishon Vijay Abraham I
No functional change. In order to have a single header file for all Cadence SERDES move phy-cadence-torrent.h to phy-cadence.h. This is in preparation for adding Cadence Sierra SERDES specific macros. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210319124128.13308-9-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Explicitly request exclusive reset controlKishon Vijay Abraham I
No functional change. Since the reset controls obtained in Sierra is exclusively used by the Sierra device, use exclusive reset control request API calls. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-8-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Move all reset_control_get*() to a separate functionKishon Vijay Abraham I
No functional change. Group devm_reset_control_get() and devm_reset_control_get_optional() to a separate function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-7-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Move all clk_get_*() to a separate functionKishon Vijay Abraham I
No functional change. Group all devm_clk_get_optional() to a separate function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-6-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Create PHY only for "phy" or "link" sub-nodesKishon Vijay Abraham I
Cadence Sierra PHY driver registers PHY using devm_phy_create() for all sub-nodes of Sierra device tree node. However Sierra device tree node can have sub-nodes for the various clocks in addtion to the PHY. Use devm_phy_create() only for nodes with name "phy" (or "link" for old device tree) which represent the actual PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/20210319124128.13308-4-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: cadence: Sierra: Fix PHY power_on sequenceKishon Vijay Abraham I
Commit 44d30d622821d ("phy: cadence: Add driver for Sierra PHY") de-asserts PHY_RESET even before the configurations are loaded in phy_init(). However PHY_RESET should be de-asserted only after all the configurations has been initialized, instead of de-asserting in probe. Fix it here. Fixes: 44d30d622821d ("phy: cadence: Add driver for Sierra PHY") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210319124128.13308-2-kishon@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30phy: cadence-torrent: Update PCIe + USB config for correct PLL1 clockSwapnil Jakhade
Update PCIe + USB register sequences for correct PLL1 clock configuration. Also, update sequences for other USB configurations with dependent changes. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1614838096-32291-5-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 11:05:23 +0000