aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/socionext
AgeCommit message (Collapse)Author
2021-06-21phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi
The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-31phy: socionext: Add UniPhier AHCI PHY driver supportKunihiko Hayashi
Add a driver for PHY interface built into ahci controller implemented in UniPhier SoCs. This supports PXs2 and PXs3 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1598352071-26675-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20phy: uniphier-pcie: Add SoC-dependent phy-mode function supportKunihiko Hayashi
Since this phy is shared by multiple devices including USB and PCIe, it is necessary to determine which device use this phy. This patch adds SoC-dependent functions to determine a device using this phy. When there is 'socionext,syscon' property in the pcie-phy node, the driver calls SoC-dependt function instead of checking .has_syscon in SoC-dependent data. The function configures the system controller to use phy for PCIe. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-pcie: Add legacy SoC support for Pro5Kunihiko Hayashi
Add legacy SoC support that needs to manage gio clock and reset and to skip setting unimplemented phy parameters. This supports Pro5. This specifies only 1 port use because Pro5 doesn't set it in the power-on sequence. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3hs: Change Rx sync mode to avoid communication failureKunihiko Hayashi
In case of using default parameters, communication failure might occur in rare cases. This sets Rx sync mode parameter to avoid the issue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3hs: Add legacy SoC support for Pro5Kunihiko Hayashi
Add legacy SoC support that needs to manage gio clock and reset. This supports Pro5. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3ss: Add Pro5 supportKunihiko Hayashi
Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: socionext: Use devm_platform_ioremap_resource()Kunihiko Hayashi
Use devm_platform_ioremap_resource() to simplify the code. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17phy: socionext: get optional clock by devm_clk_get_optional()Chunfeng Yun
Use devm_clk_get_optional() to get optional clock Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-11-12phy: uniphier-pcie: Depend on HAS_IOMEMKunihiko Hayashi
The driver uses devm_ioremap_resource() which is only available when CONFIG_HAS_IOMEM is set, so the driver depends on this option. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: socionext: add PCIe PHY driver supportKunihiko Hayashi
Add a driver for PHY interface built into PCIe controller implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10phy: socionext: add USB2 PHY driver for UniPhier SoCKunihiko Hayashi
Add a driver for PHY interface built into USB2 controller implemented on UniPhier SoCs. This driver supports HS-PHY for Pro4 and LD11. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10phy: socionext: add USB3 PHY driver for UniPhier SoCKunihiko Hayashi
Add a driver for PHY interface built into USB3 controller implemented in UniPhier SoCs. This driver supports High-Speed PHY and Super-Speed PHY. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Motoya Tanigawa <tanigawa.motoya@socionext.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 08:39:34 +0000