aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2021-02-10Merge tag 'phy-fixes2-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: second round of phy fixes for v5.11 - rockchip: init return and vednor prefix to dt-property - cpcap: bool conversion fix - lantiq: clock enable fix - lgm: kconfig depends on x86 - mediatek: add mising MODULE_DEVICE_TABLE() * tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: Add missing MODULE_DEVICE_TABLE() phy: phy-brcm-sata: remove unneeded semicolon phy: USB_LGM_PHY should depend on X86 phy: lantiq: rcu-usb2: wait after clock enable phy: rockchip: emmc, add vendor prefix to dts properties devicetree: phy: rockchip-emmc optional add vendor prefix phy: cpcap-usb: remove unneeded conversion to bool phy: rockchip-emmc: emmc_phy_init() always return 0
2021-02-09Merge tag 'phy-for-5.12' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.12 - Updates: - Conversion to YAML binding for: - mtk-xsphy - mtk-tphy - mtk-ufs - HDMI PHY - MIPI DSI PHY - brcmstb-usb-phy - Support for BCM4908 usb phy - Support for Qualcomm SDX55 USB and QMP phy - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy - Support for Qualcomm SDM660 USB and UFS phy - Support for Qualcomm SC8180X USB and UFS phy - Support for Qualcomm IPQ6018 USB phy - Stm32 phy updates * tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: cpcap-usb: Simplify bool conversion phy: qcom-qmp: make a const array static, makes object smaller phy: zynqmp: Simplify code by using dev_err_probe() phy: qcom-qmp: Add support for SM8350 UFS phy phy: qcom-qmp: Add UFS V5 registers found in SM8350 dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings phy: qualcomm: usb28nm: Add MDM9607 init sequence dt-bindings: phy: qcom,qusb2: document ipq6018 compatible phy: qcom-qusb2: add QUSB2 support for IPQ6018 phy: qcom-qmp: Add SC8180X USB phy phy: qcom-qmp: Add SC8180X UFS phy dt-bindings: phy: qcom,qmp: Add SC8180X USB phy dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding dt-bindings: phy: qcom-qusb2: Document SDM660 compatible phy: qcom-qusb2: Add configuration for SDM660 phy: qcom-qusb2: Allow specifying default clock scheme dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings phy: qcom-qmp: Add SM8350 USB QMP PHYs dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings phy: qcom-qmp: Add support for SDX55 QMP PHY ...
2021-02-06phy: cpcap-usb: Simplify bool conversionYang Li
Fix the following coccicheck warning: ./drivers/phy/motorola/phy-cpcap-usb.c:146:31-36: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1611905915-50394-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: qcom-qmp: make a const array static, makes object smallerColin Ian King
Don't populate the const array cfg1_settings on the stack but instead make it static. Makes the object code smaller by 24 bytes: Before: text data bss dec hex filename 73585 20240 64 93889 16ec1 drivers/phy/qualcomm/phy-qcom-qmp.o After: text data bss dec hex filename 73465 20336 64 93865 16ea9 drivers/phy/qualcomm/phy-qcom-qmp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210204180313.108876-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: zynqmp: Simplify code by using dev_err_probe()Michal Simek
Use already prepared dev_err_probe() introduced by commit a787e5400a1c ("driver core: add device probe log helper"). It simplifies EPROBE_DEFER handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0df30548f721b10475a6cc5659beda102fec3c87.1612444300.git.michal.simek@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: qcom-qmp: Add support for SM8350 UFS phyVinod Koul
Add the tables for init sequences for UFS QMP phy found in SM8350 SoC. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210204165805.62235-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06phy: qcom-qmp: Add UFS V5 registers found in SM8350Vinod Koul
Add the registers for UFS found in SM8350. The UFS phy used in SM8350 seems to have same offsets as V5 phy, although Documentation for that is lacking. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210204165805.62235-3-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: mediatek: Add missing MODULE_DEVICE_TABLE()Boris Brezillon
This patch adds the missing MODULE_DEVICE_TABLE definitions on different Mediatek phy drivers which generates correct modalias for automatic loading when these drivers are compiled as an external module. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210203110631.686003-1-enric.balletbo@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: phy-brcm-sata: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/phy/broadcom/phy-brcm-sata.c:654:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1612321087-14743-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: qualcomm: usb28nm: Add MDM9607 init sequenceKonrad Dybcio
This is required to bring up the PHY on MDM9607-based boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210131013124.54484-1-konrad.dybcio@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: USB_LGM_PHY should depend on X86Geert Uytterhoeven
The Intel Lightning Mountain (LGM) USB3 USB is only present on Intel Lightning Mountain SoCs. Hence add a dependency on X86, to prevent asking the user about this driver when configuring a kernel without Intel Lightning Mountain platform support. Fixes: 1cce8f73a561c944 ("phy: Add USB3 PHY support for Intel LGM SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210129131753.2656306-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: qcom-qusb2: add QUSB2 support for IPQ6018Kathiravan T
Add the phy init sequence for the Super Speed ports found on IPQ6018. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> [baruch: add ipq6018_regs_layout[], drop binding change] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/b8c22dddf1f70d89e135fe1ae705ddc68e295ebb.1611756920.git.baruch@tkos.co.il Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: qcom-qmp: Add SC8180X USB phyBjorn Andersson
The Qualcomm SC8180X has two QMP phys used for SuperSpeed USB, which are either the same or very similar to the same found in SM8150. Add a compatible for this, reusing the existing SM8150 USB phy config. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210121014339.1612525-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-04phy: qcom-qmp: Add SC8180X UFS phyBjorn Andersson
The UFS phy found in the Qualcomm SC8180X is either the same or very similar to the phy present in SM8150, so add a compatible and reuse the SM8150 configuration. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210120224531.1610709-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-19phy: qcom-qusb2: Add configuration for SDM660AngeloGioacchino Del Regno
The SDM660 SoC uses the same configuration as MSM8996, but the clock scheme uses a differential reference clock and none of the SoCs in this series (630, 636 and others) have got a usable PHY_CLK_SCHEME register in the TCSR for clk scheme detection. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210114174718.398638-2-angelogioacchino.delregno@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-19phy: qcom-qusb2: Allow specifying default clock schemeAngeloGioacchino Del Regno
The TCSR's PHY_CLK_SCHEME register is not available on all SoC models, but some may still use a differential reference clock. In preparation for these SoCs, add a se_clk_scheme_default configuration entry and declare it to true for all currently supported SoCs (retaining the previous defaults. This patch brings no functional changes. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210114174718.398638-1-angelogioacchino.delregno@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-19phy: qcom-qmp: Add SM8350 USB QMP PHYsJack Pham
Add support for the USB DP & UNI PHYs found on SM8350. These use version 5.0.0 of the QMP PHY IP and thus require new "V5" definitions of the register offset macros for the QSERDES RX and TX blocks. The QSERDES common and QPHY PCS blocks' register offsets are largely unchanged from V4 so some of the existing macros can be reused. Signed-off-by: Jack Pham <jackp@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210115174723.7424-3-jackp@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-17phy: qcom-qmp: Add support for SDX55 QMP PHYManivannan Sadhasivam
Add support for USB3 QMP PHY found in SDX55 platform. SDX55 uses version 4.0.0 of the QMP PHY IP and doesn't make use of "com_aux" clock. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210111113010.32056-3-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: stm32: rework PLL Lock detectionAmelie Delaunay
USBPHYC has a register per phy to control and monitor the debug interface of the HS PHY through a digital debug access. With this register, it is possible to know if PLL Lock input to phy is high. That means the PLL is ready for HS operation. Instead of using an hard-coded delay after PLL enable and PLL disable, use this bit to ensure good operating of the HS PHY. Also use an atomic counter (n_pll_cons) to count the actual number of PLL consumers and get rid of stm32_usbphyc_has_one_phy_active. The boolean active in the usbphyc_phy structure is kept, because we need to know in remove if a phy_exit is required to properly disable the PLL. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105090525.23164-7-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: stm32: ensure phy are no more active when removing the driverAmelie Delaunay
To ensure a good balancing of regulators, and allow PLL disabling when the driver is removed, call stm32_usbphyc_phy_exit on each ports to set phys inactive and disable PLL. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105090525.23164-6-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: stm32: ensure pll is disabled before phys creationAmelie Delaunay
To ensure a good balancing of regulators, force PLL disable either by reset or by clearing the PLLEN bit. If waiting the powerdown pulse delay isn't enough, return -EPROBE_DEFER instead of polling the PLLEN bit, which will be low at the next probe. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105090525.23164-5-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: stm32: replace regulator_bulk* by multiple regulator_*Amelie Delaunay
Due to async_schedule_domain call in regulator_bulk_enable, scheduling while atomic bug can raise if regulator_bulk_enable is called under atomic context. To avoid this issue, this patch replaces all regulator_bulk* by regulator_ per regulators. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105090525.23164-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: stm32: manage 1v1 and 1v8 supplies at pll activation/deactivationAmelie Delaunay
PLL block requires to be powered with 1v1 and 1v8 supplies to catch ENABLE signal. Currently, supplies are managed through phy_ops .power_on/off, and PLL activation/deactivation is managed through phy_ops .init/exit. The sequence of phy_ops .power_on/.phy_init, .power_off/.exit is USB drivers dependent. To ensure a good behavior of the PLL, supplies have to be managed at PLL activation/deactivation. That means the supplies need to be put in usbphyc node and not in phy children nodes. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105090525.23164-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: support PHY on the BCM4908Rafał Miłecki
BCM4908 seems to have slightly different registers but works when programmed just like the STB one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: mediatek: Mark mtk_mipi_tx_driver with static keywordZou Wei
Fix the following sparse warning: drivers/phy/mediatek/phy-mtk-mipi-dsi.c:237:24: warning: symbol 'mtk_mipi_tx_driver' was not declared. Should it be static? Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1610415484-92497-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: lantiq: rcu-usb2: wait after clock enableMathias Kresin
Commit 65dc2e725286 ("usb: dwc2: Update Core Reset programming flow.") revealed that the phy isn't ready immediately after enabling it's clocks. The dwc2_check_core_version() fails and the dwc2 usb driver errors out. Add a short delay to let the phy get up and running. There isn't any documentation how much time is required, the value was chosen based on tests. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: <stable@vger.kernel.org> # v5.7+ Link: https://lore.kernel.org/r/20210107224901.2102479-1-dev@kresin.me Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: ingenic: Remove useless field .versionPaul Cercueil
Remove the useless field .version from the private structure, which is set but never read. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201223124505.40792-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: cadence-torrent: Fix error code in cdns_torrent_phy_probe()Dan Carpenter
This error path should return -EINVAL, but currently it returns success. Fixes: d09945eacad0 ("phy: cadence-torrent: Check total lane count for all subnodes is within limit") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9s7Wxq+b6ls0q7o@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: specify init function format at struct levelRafał Miłecki
This is slightly cleaner solution that assures noone assings a wrong function to the pointer. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201216143305.12179-2-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: phy-brcm-usb: improve getting OF matching dataRafał Miłecki
1. Use of_device_get_match_data() helper to simplify the code 2. Check for NULL as a good practice Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201216143305.12179-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: rockchip: emmc, add vendor prefix to dts propertiesChris Ruehl
Update the implementation add "rockchip," vendor prefix for the optional dts properties. Prefix referred from vendor-prefixes.yaml. Follow up with commit 8b5c2b45b8f0a ("phy: rockchip: set pulldown for strobe line in dts") commit a8cef928276bb ("phy: rockchip-emmc: output tap delay dt property") Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201215014409.905-3-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: cpcap-usb: remove unneeded conversion to boolTian Tao
Fix the following warning: drivers/phy/motorola/phy-cpcap-usb.c:146:31-36: WARNING: conversion to bool not needed here. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1607598716-16108-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-13phy: rockchip-emmc: emmc_phy_init() always return 0Chris Ruehl
rockchip_emmc_phy_init() return variable is not set with the error value if clk_get() failed. 'emmcclk' is optional, thus use clk_get_optional() and if the return value != NULL make error processing and set the return code accordingly. Fixes: 52c0624a10cce phy: rockchip-emmc: Set phyctrl_frqsel based on card clock Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210080454.17379-1-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04phy: mediatek: allow compile-testing the dsi phyArnd Bergmann
Randconfig builds show another broken dependency: WARNING: unmet direct dependencies detected for PHY_MTK_MIPI_DSI Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y] Selected by [m]: - DRM_MEDIATEK [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_MEDIATEK [=n] || ARM [=y] && COMPILE_TEST [=y]) && COMMON_CLK [=y] && HAVE_ARM_SMCCC [=y] && OF [=y] && MTK_MMSYS [=y] This is similar to the hdmi driver I fixed earlier, and I guess the common-clk bug would sooner or later also manifest here, so just use the exact same solution I chose for the other driver, and hope that any future drivers just copy it from here. Fixes: 90f80d95992f ("phy: mediatek: Move mtk_mipi_dsi_phy driver into drivers/phy/mediatek folder") Fixes: f5f6e01f9164 ("phy: mediatek: allow compile-testing the hdmi phy") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135524.3678664-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04phy: cpcap-usb: Fix warning for missing regulator_disableTony Lindgren
On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-29PHY: Ingenic: fix unconditional build of phy-ingenic-usbAlexander Lobakin
Currently drivers/phy/ingenic/Makefile adds phy-ingenic-usb to targets not depending on actual Kconfig symbol CONFIG_PHY_INGENIC_USB, so this driver always gets built[-in] on every system. Add missing dependency. Fixes: 31de313dfdcf ("PHY: Ingenic: Add USB PHY driver using generic PHY framework.") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Link: https://lore.kernel.org/r/20201222131021.4751-1-alobakin@pm.me Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-15Merge tag 'char-misc-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-09Merge tag 'phy-for-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...
2020-12-08drm/mediatek: avoid dereferencing a null hdmi_phy on an error messageColin Ian King
Currently there is a null pointer check for hdmi_phy that implies it may be null, however a dev_err messages dereferences this potential null pointer. Avoid a null pointer dereference by only emitting the dev_err message if hdmi_phy is non-null. It is a moot point if the error message needs to be printed at all, but since this is a relatively new piece of code it may be useful to keep the message in for the moment in case there are unforseen errors that need to be reported. Fixes: be28b6507c46 ("drm/mediatek: separate hdmi phy to different file") Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Dereference after null check") Link: https://lore.kernel.org/r/20201207150937.170435-1-colin.king@canonical.com [vkoul: fix indent of return call] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-08phy: ingenic: depend on HAS_IOMEMVinod Koul
The driver uses devm_ioremap_resource() which will not be built if CONFIG_HAS_IOMEM is not selected, so add depends on it to fix the build failure on few archs s390-linux-ld: drivers/phy/ingenic/phy-ingenic-usb.o: in function `ingenic_usb_phy_probe': >> phy-ingenic-usb.c:(.text+0xb66): undefined reference to `devm_platform_ioremap_resource' Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20201208045300.3637026-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-07phy: mediatek: statify mtk_hdmi_phy_driverVinod Koul
mtk_hdmi_phy_driver is not declared as static, so statify it. drivers/phy/mediatek/phy-mtk-hdmi.c:204:24: warning: symbol 'mtk_hdmi_phy_driver' was not declared. Should it be static? Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/20201205091146.3184305-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: rockchip-emmc: output tap delay dt propertyChris Ruehl
Update the rockchip-emmc phy to set the otapdlysec register with a dt property. This was mentioned from Brian Norris when he sent the path to set the default value in the driver. This patch add a dt property 'output-tapdelay-select' u32 and allow to set the 0x0-0xf. If not set in dts, the old default 0x4 applies. Tested with our customized rk3399 to tune the eMMC. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201202082507.3536-2-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05PHY: Ingenic: Add USB PHY driver using generic PHY framework.周琰杰 (Zhou Yanjie)
Used the generic PHY framework API to create the PHY, this driver supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC, X1000 SoC, X1830 SoC and X2000 SoC. Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: rockchip: set pulldown for strobe line in dtsChris Ruehl
This patch add support to set the internal pulldown via dt property and allow simplify the board design for the trace from emmc-phy to the eMMC chipset. Default to not set the pull-down. This patch was inspired from the 4.4 tree of the Rockchip SDK, where it is enabled unconditional. The patch had been tested with our rk3399 customized board. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Link: https://lore.kernel.org/r/20201129054416.3980-2-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failureWang Li
pm_runtime_enable() will decrease power disable depth. Thus a pairing increment is needed on the error handling path to keep it balanced. Fixes: 5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-05phy: mediatek: allow compile-testing the hdmi phyArnd Bergmann
Compile-testing the DRM_MEDIATEK_HDMI driver shows two missing dependencies, one results in a link failure: arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_probe': phy-mtk-hdmi.c:(.text+0xd8): undefined reference to `__clk_get_name' arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x12c): undefined reference to `devm_clk_register' arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x250): undefined reference to `of_clk_add_provider' arm-linux-gnueabi-ld: phy-mtk-hdmi.c:(.text+0x298): undefined reference to `of_clk_src_simple_get' The other one is a harmless warning: WARNING: unmet direct dependencies detected for PHY_MTK_HDMI Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y] Selected by [y]: - DRM_MEDIATEK_HDMI [=y] && HAS_IOMEM [=y] && DRM_MEDIATEK [=y] Fix these by adding dependencies on CONFIG_OF and CONFIG_COMMON_CLK. With that done, there is also no reason against adding CONFIG_COMPILE_TEST. Fixes: b28be59a2e26 ("phy: mediatek: Move mtk_hdmi_phy driver into drivers/phy/mediatek folder") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201204135650.2744481-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-02phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build errorTiezhu Yang
devm_ioremap_resource() will be not built in lib/devres.c if CONFIG_HAS_IOMEM is not set, and then there exists a build error about undefined reference to "devm_ioremap_resource" in the file phy-rockchip-inno-hdmi.c under COMPILE_TEST and CONFIG_PHY_ROCKCHIP_INNO_HDMI, make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1606216287-14648-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-02phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250Marek Szyprowski
Exynos5420 variant of USB2 PHY is handled by the same code as the Exynos5250 one. Introducing a separate Kconfig symbol for it was an over-engineering, which turned out to cause build break for certain configurations: ERROR: modpost: "exynos5420_usb2_phy_config" [drivers/phy/samsung/phy-exynos-usb2.ko] undefined! Fix this by removing PHY_EXYNOS5420_USB2 symbol and using PHY_EXYNOS5250_USB2 also for Exynos5420 SoCs. Reported-by: Markus Reichl <m.reichl@fivetechno.de> Fixes: 81b534f7e9b2 ("phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20201202064759.24300-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-12-01phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macroSergio Paracuellos
Correct name passed into 'MODULE_DEVICE_TABLE' which was wrong and was showing a warning when the driver is enabled for 'COMPILE_TEST'. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201201112051.17463-3-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 11:22:10 +0000