aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2019-03-26phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYsChen-Yu Tsai
While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-08Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-12Merge tag 'phy-for-5.1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.1 *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3, PCIe) *) Add a new driver to support Armada UTMI PHY *) Add a new driver to support Cadence D-PHY *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm MSM8998 *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998 *) Remove module specific code that is present for drivers that can be only built-in *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just i.MX8MQ *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro, remove unused headers etc., Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits) phy: qcom-qmp: Add QMP UFS PHY support for msm8998 dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy phy: bcm-sr-pcie: Change operation when PIPEMUX=1 phy: Add Cadence D-PHY support dt-bindings: phy: Move the Cadence D-PHY bindings phy: dphy: Clarify lanes parameter documentation phy: dphy: Change units of wakeup and init parameters phy: dphy: Remove unused header MAINTAINERS: phy: fill Armada 3700 PHY drivers entry dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings phy: add A3700 UTMI PHY driver MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings phy: add A3700 COMPHY support phy: mvebu-cp110-comphy: fix port check in ->xlate() phy: armada375-usb2: switch to SPDX license identifier phy: make phy-armada375-usb2 explicitly non-modular phy: make phy-mvebu-sata explicitly non-modular phy: make phy-core explicitly non-modular phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 ...
2019-02-12phy: qcom-qmp: Add QMP UFS PHY support for msm8998Marc Gonzalez
Use same init sequence as sdm845. Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: armada38x: add common phy supportRussell King
Add support for the Armada 38x common phy to allow us to change the speed of the Ethernet serdes lane. This driver only supports manipulation of the speed, it does not support configuration of the common phy. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07phy: Move Allwinner A31 D-PHY driver to drivers/phy/Maxime Ripard
Now that our MIPI D-PHY driver has been converted to the phy framework, let's move it into the drivers/phy directory. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com
2019-02-07phy: bcm-sr-pcie: Change operation when PIPEMUX=1Qingmin Liu
When PIPEMIX=1, change the operation from 2x8 EP to 1x8 EP + 1x8 RC. Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: Add Cadence D-PHY supportMaxime Ripard
Cadence has designed a D-PHY that can be used by the, currently in tree, DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers. Only the DSI driver has an ad-hoc driver for that phy at the moment, while the v4l2 drivers are completely missing any phy support. In order to make that phy support available to all these drivers, without having to duplicate that code three times, let's create a generic phy framework driver. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: dphy: Change units of wakeup and init parametersMaxime Ripard
The Init and wakeup D-PHY parameters are in the micro/milliseconds range, putting the values real close to the types limits if they were in picoseconds. Move them to microseconds which should be better fit. Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: add A3700 UTMI PHY driverMiquel Raynal
Marvell Armada 3700 SoC has two USB controllers, each of them being wired to an internal UTMI PHY. Add a driver to control them. Igal Liberman worked on supporting the PHY, I took the while 'register configuration' from his work and rewrote almost entirely the driver/bindings around it. Co-developed-by: Igal Liberman <igall@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: add A3700 COMPHY supportMiquel Raynal
Add a driver to support COMPHY, a hardware block providing shared serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and rely on having an up-to-date firmware. SATA, PCie and USB3 host mode have been tested successfully with an ESPRESSObin. (HS)SGMII mode cannot be tested with this platform. Evan worked on the original driver structure and Grzegorz on the SMC calls rework. The structure of this driver has been copied from Antoine Tenart work on CP110 COMPHY driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Co-developed-by: Evan Wang <xswang@marvell.com> Signed-off-by: Evan Wang <xswang@marvell.com> Co-developed-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: mvebu-cp110-comphy: fix port check in ->xlate()Miquel Raynal
So far the PHY ->xlate() callback was checking if the port was "invalid" before continuing, meaning that the port has not been used yet. This check is not correct as there is no opposite call to ->xlate() once the PHY is released by the user and the port will remain "valid" after the first phy_get()/phy_put() calls. Hence, if this driver is built as a module, inserted, removed and inserted again, the PHY will appear busy and the second probe will fail. To fix this, just drop the faulty check and instead verify that the port number is valid (ie. in the possible range). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: armada375-usb2: switch to SPDX license identifierGregory CLEMENT
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: make phy-armada375-usb2 explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/phy/marvell/Kconfig:config ARMADA375_USBCLUSTER_PHY drivers/phy/marvell/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple of traces of modular infrastructure, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: make phy-mvebu-sata explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/phy/Kconfig:config PHY_MVEBU_SATA drivers/phy/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the couple of traces of modular infrastructure, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: make phy-core explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/phy/Kconfig:config GENERIC_PHY drivers/phy/Kconfig: bool "PHY Core" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't remove module.h since the file is using other modular fcns (to load other phy modules) even though the core support itself is non-modular. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: qcom-qusb2: Add QUSB2 PHY support for msm8998Jeffrey Hugo
MSM8998 contains one QUSB2 PHY which is very similar to the existing sdm845 support. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid propertyEnric Balletbo i Serra
That property is no used in mainline and is not documented. The only board using that property is the rk33-99-evb-rev1 and -rev2 in the vendor kernel. The existence of a further -rev3 (which also looks way better cared for compared rev1+2) indicates that the older ones are probably some sort of preproduction models, where some wiring (on the soc or board) may have gone wrong. It is also not clear why this is a hardware-description or a DT property, so, as noboby seems to care of this just drop reading that property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998Jeffrey Hugo
MSM8998 contains a single QMP v3 USB3 phy similar to the existing sdm845 support. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: rockchip-inno-usb2: fix misspelling and kernel-doc documentationEnric Balletbo i Serra
Fix the typo flase -> false and clean up the kernel-doc documentation in phy-rockchip-inno.usb2.c and fix the following warnings when documentation is built. :58: warning: missing initial short description :69: warning: cannot understand function prototype: 'enum usb_chg_state ' :97: warning: missing initial short description :136: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port_cfg ' :157: warning: cannot understand function prototype: 'struct rockchip_usb2phy_cfg ' :163: warning: Function parameter or member 'port_cfgs' not described in 'rockchip_usb2phy_cfg' :187: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port ' :204: warning: Function parameter or member 'port_cfg' not described in 'rockchip_usb2phy_port' :207: warning: missing initial short description :234: warning: Function parameter or member 'dev' not described in 'rockchip_usb2phy' :234: warning: Function parameter or member 'clk480m_hw' not described in 'rockchip_usb2phy' Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: ti: usb2: Add support for AM654 USB2 PHYRoger Quadros
Add support for the USB2 PHY on the AM654 SoC. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: ti: Don't depend on OMAP_OCP2SCPRoger Quadros
TI_PIPE3 and OMAP_USB2 don't depend on OMAP_OCP2SCP for build. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: ti: usb2: Fix logic on -EPROBE_DEFERRoger Quadros
If clk_get() returns -EPROBE_DEFER then we should just return instead of falling back to old clock name. Use clk_prepare_enable() and clk_disable_unprepare() instead of splitting up prepare/unprepare from enable/disable. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: qcom-ufs: Use iopoll.h readl_poll_timeout macroMarc Gonzalez
The private copy of readl_poll_timeout is no longer needed. Use the implementation in iopoll.h instead. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: freescale: Break dependency on SOC_IMX8MQ for USB PHYAbel Vesa
Since this is going to be used on more SoCs than just i.MX8MQ, make the dependency here more generic. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-25Merge tag 'usb-5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 5.0-rc4. Nothing major at all, just the usual selection of USB gadget bugfixes, some new USB serial driver ids, some SPDX fixes, and some PHY driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: keyspan_usa: add proper SPDX lines for .h files USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE USB: leds: fix regression in usbport led trigger usb: chipidea: fix static checker warning for NULL pointer MAINTAINERS: email address update in MAINTAINERS entries USB: usbip: delete README file USB: serial: pl2303: add new PID to support PL2303TB usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing phy: ath79-usb: Fix the main reset name to match the DT binding phy: ath79-usb: Fix the power on error path phy: fix build breakage: add PHY_MODE_SATA phy: ti: ensure priv is not null before dereferencing it USB: serial: ftdi_sio: fix GPIO not working in autosuspend usb: gadget: Potential NULL dereference on allocation error usb: dwc3: gadget: Fix the uninitialized link_state when udc starts usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup usb: dwc3: gadget: synchronize_irq dwc irq in suspend USB: serial: simple: add Motorola Tetra TPG2200 device id
2019-01-16phy: ath79-usb: Fix the main reset name to match the DT bindingAlban Bedel
I submitted this driver several times before it got accepted. The first series hasn't been accepted but the DTS binding did made it. I then made a second series that added generic reset support to the PHY core, this in turn required a change to the DT binding. This second series seemed to have been ignored, so I did a third one without the change to the PHY core and the DT binding update, and this last attempt finally made it. But two months later the DT binding update from the second series has been integrated too. So now the driver doesn't match the binding and the only DTS using it. This patch fix the driver to match the new binding. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-16phy: ath79-usb: Fix the power on error pathAlban Bedel
In the power on function the error path doesn't return the suspend override to its proper state. It should should deassert this reset line to enable the suspend override. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-16phy: fix build breakage: add PHY_MODE_SATAJohn Hubbard
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-16phy: ti: ensure priv is not null before dereferencing itColin Ian King
Currently priv is being dereferenced before priv is being null checked. Fix this by moving the null check on priv before the dereference. Detected by CoverityScan, CID#1476018 ("Dereference before null check") Fixes: 92b58b34741f ("phy: ti: introduce phy-gmii-sel driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-12phy: fix build breakage: add PHY_MODE_SATAJohn Hubbard
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Acked-by: Olof Johansson <olof@lixom.net> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-07phy: ti: Fix compilation failures without REGMAPJason Gunthorpe
This driver requires regmap or the compile fails: drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; Add it to kconfig. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12phy: qcom-qmp: Expose provided clocks to DTEvan Green
Register a simple clock provider for the PHY pipe clock sources so that device tree users can point at these clocks via phandles to the lane nodes. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: qcom-qmp: Utilize fully-specified DT registersEvan Green
Utilize the newly fixed up DT bindings to get the tx2 and rx2 register regions for the second lane of dual-lane PHYs. Before this change, the driver was simply using lane one's register region and adding 0x400, which reached well beyond the DT-specified register allocation. This would have been a crash were it not for the page size on ARM64. Fix the driver not to rely on the magic of virtual memory by using the newly specified DT register regions for tx2 and rx2. In order to support existing device trees, this change also contains a fallback mode for when those new register regions don't exist, which reverts to the original behavior of overreaching and prints a complaint. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: ti: fix semicolon.cocci warningskbuild test robot
drivers/phy/ti/phy-gmii-sel.c:91:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 1811851f4e73 ("phy: ti: introduce phy-gmii-sel driver") CC: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: dphy: Add configuration helpersMaxime Ripard
The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add configuration interfaceMaxime Ripard
The phy framework is only allowing to configure the power state of the PHY using the init and power_on hooks, and their power_off and exit counterparts. While it works for most, simple, PHYs supported so far, some more advanced PHYs need some configuration depending on runtime parameters. These PHYs have been supported by a number of means already, often by using ad-hoc drivers in their consumer drivers. That doesn't work too well however, when a consumer device needs to deal with multiple PHYs, or when multiple consumers need to deal with the same PHY (a DSI driver and a CSI driver for example). So we'll add a new interface, through two funtions, phy_validate and phy_configure. The first one will allow to check that a current configuration, for a given mode, is applicable. It will also allow the PHY driver to tune the settings given as parameters as it sees fit. phy_configure will actually apply that configuration in the phy itself. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: add driver for Freescale i.MX8MQ USB3 PHYLi Jun
This is a cleaned up port of the downstream i.MX8MQ USB3 PHY driver. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: ti: introduce phy-gmii-sel driverGrygorii Strashko
TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. The interface mode is selected by configuring the MII mode selection register(s) (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and bit fields placement in SCM are different between SoCs while fields meaning is the same. Historically CPSW external Port's interface mode selection configuration was introduced using custom API and driver cpsw-phy-sel.c. This leads to unnecessary driver, DT binding and custom API support effort. This patch introduces CPSW Port's PHY Interface Mode selection Driver (phy-gmii-sel) which implements standard Linux PHY interface and used as a replacement for TI's specific driver cpsw-phy-sel.c and corresponding custom API. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: mvebu-cp110-comphy: fix spelling in structure nameMiquel Raynal
Rename the mvebu_comhy_conf structure to be mvebu_comphy_conf, which is probably what the original author meant. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: mapphone-mdm6600: Improve phy related runtime PM callsTony Lindgren
I noticed that phy_pm_runtime_get_sync() and phy_pm_runtime_put() are not currently doing anything for phy-mapphone-mdm6600, only the sysfs interface for works for "auto" and "on". This is because of the shared GPIO pins between mdm6600 USB port and n_gsm port. We have not enabled runtime PM for the phy driver until after we've booted up mdm6600 properly to the USB mode. Otherwise phy_create() would have called pm_runtime_enable() and pm_runtime_no_callbacks() automatically on init. Let's fix this by registering the phy a bit later after we've powered up the mdm6600 USB port. And as the PM runtime support is only needed for the n_gsm mode and not for USB, we can allow the device to idle between phy_mdm6600_power_on() and phy_mdm6600_power_off(). Note that for suspend, runtime_pm is already disabled for the phy so we need to check for pm_runtime_enabled(). Cc: Johan Hovold <jhovold@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: renesas: rcar-gen3-usb2: follow the hardware manual procedureYoshihiro Shimoda
This patch modifies rcar_gen3_init_otg() procedure to follow Figure 73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: cadence: Add driver for Sierra PHYAlan Douglas
Add a Sierra PHY driver with PCIe and USB support. The PHY has multiple lanes, which can be configured into groups, and a generic PHY device is created for each group. There are two resets controlling the overall PHY block, one to enable the APB interface for programming registers, and another to enable the PHY itself. Additionally there are resets for each PHY lane. The PHY can be configured in hardware to read register settings from ROM, or they can be written by the driver. The sequence of operation on startup is to enable the APB bus, write the PHY registers (if required) for each lane group, and then enable the PHY. Each group of lanes can then be individually controlled using the power_on()/ power_off() function for that generic PHY Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: mvebu-cp110-comphy: convert to use eth phy mode and submodeGrygorii Strashko
Convert mvebu-cp110-comphy PHY driver to use recently introduced PHY_MODE_ETHERNET and phy_set_mode_ext(). Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: ocelot-serdes: convert to use eth phy mode and submodeGrygorii Strashko
Convert ocelot-serdes PHY driver to use recently introduced PHY_MODE_ETHERNET and phy_set_mode_ext(). Cc: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Tested-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: rework phy_set_mode to accept phy mode and submodeGrygorii Strashko
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>