aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl/bcm
AgeCommit message (Collapse)Author
2022-01-12Merge tag 'pinctrl-v5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
2021-12-26pinctrl: bcm: ns: use generic groups & functions helpersRafał Miłecki
This simplifies ns driver and gets rid of ~70 lines of code. "const" had to be dropped from "struct ns_pinctrl_group" @pins to match "struct group_desc" @pins and pinctrl_generic_add_group(). Otherwise it would cause: drivers/pinctrl/bcm/pinctrl-ns.c: In function 'ns_pinctrl_probe': drivers/pinctrl/bcm/pinctrl-ns.c:277:13: warning: passing argument 3 of 'pinctrl_generic_add_group' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 277 | group->pins, group->num_pins, NULL); | ~~~~~^~~~~~ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211222064344.14624-1-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-16pinctrl: Get rid of duplicate of_node assignment in the driversAndy Shevchenko
GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once. For the details one may look into the of_gpio_dev_init() implementation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-16pinctrl-bcm2835: don't call pinctrl_gpio_direction()Hans Verkuil
Set the direction directly without calling pinctrl_gpio_direction(). This avoids the mutex_lock() calls in that function, which would invalid the can_sleep = false. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211206131648.1521868-3-hverkuil-cisco@xs4all.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-10pinctrl: bcm2835: Change init order for gpio hogsPhil Elwell
...and gpio-ranges pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio side is registered first, but this breaks gpio hogs (which are configured during gpiochip_add_data). Part of the hog initialisation is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't yet been registered this results in an -EPROBE_DEFER from which it can never recover. Change the initialisation sequence to register the pinctrl driver first. This also solves a similar problem with the gpio-ranges property, which is required in order for released pins to be returned to inputs. Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-10pinctrl: bcm2835: Silence uninit warningLinus Walleij
The uninitialized variable would be caught by the BUG_ON() logic below, but the kernel test robot cannot see that. Silence the warning by initializing the variable. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211209134513.306212-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-05Merge tag 'pinctrl-v5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The most interesting aspect is that we now have initial support for the Apple pin controller as used in the M1 laptops and the iPhones which is a step forward for using Linux efficiently on this Apple silicon. Core changes: - Add infrastructure for per-parent interrupt data to support the Apple pin controller. New drivers: - New combined pin control and GPIO driver for the Apple SoC. This is used in all modern Apple silicon such as the M1 laptops but also in at least recent iPhone variants. - New subdriver for the Qualcomm SM6350 - New subdriver for the Qualcomm QCM2290 - New subdriver for the Qualcomm PM6350 - New subdriver for the Uniphier NX1 - New subdriver for the Samsung ExynosAutoV9 - New subdriver for the Mediatek MT7986 - New subdriver for the nVidia Tegra194 Improvements: - Improve power management in the Mediatek driver. - Improvements to the Renesas internal consistency checker. - Convert the Rockchip pin control device tree bindings to YAML. - Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to use hierarchical interrupts. - Convert the Qualcomm PMIC MPP device tree bindings to YAML" * tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits) pinctrl: add pinctrl/GPIO driver for Apple SoCs dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl gpio: Allow per-parent interrupt data pinctrl: tegra: Fix warnings and error pinctrl: intel: Kconfig: Add configuration menu to Intel pin control pinctrl: tegra: Use correct offset for pin group pinctrl: core: fix possible memory leak in pinctrl_enable() pinctrl: bcm2835: Allow building driver as a module pinctrl: equilibrium: Fix function addition in multiple groups pinctrl: tegra: Add pinmux support for Tegra194 pinctrl: tegra: include lpdr pin properties pinctrl: mediatek: add support for MT7986 SoC dt-bindings: pinctrl: update bindings for MT7986 SoC pinctrl: microchip sgpio: use reset driver dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip pinctrl: qcom: spmi-mpp: hardcode IRQ counts pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip ...
2021-10-25pinctrl: bcm2835: Allow building driver as a moduleFlorian Fainelli
Update the pinctrl-bcm2835 driver to support being built as as a module by converting it to a module_platform_driver() with the appropriate module license, authors and description. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://lore.kernel.org/r/20211019221127.1953001-1-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"Rafał Miłecki
This reverts commit a49d784d5a8272d0f63c448fe8dc69e589db006e. The updated binding was wrong / invalid and has been reverted. There isn't any upstream kernel DTS using it and Broadcom isn't known to use it neither. There is close to zero chance this will cause regression for anyone. Actually in-kernel bcm5301x.dtsi still uses the old good binding and so it's broken since the driver update. This revert fixes it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-02Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-08-12pinctrl: Bulk conversion to generic_handle_domain_irq()Marc Zyngier
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-07-23pinctrl: bcm2835: Replace BUG with BUG_ONJason Wang
The if condition followed by BUG can be replaced to BUG_ON which is more compact and formal in linux source. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210624064913.41788-1-wangborong@cdjrlc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: bcm: Constify static pinmux_opsRikard Falkeborn
These are only assigned, either directly or via the bcm63xx_pinctrl_soc struct, to the pmxops field in the pinctrl_desc struct and never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210605185908.39982-3-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: bcm: Constify static pinctrl_opsRikard Falkeborn
These are only assigned, either directly or via the bcm63xx_pinctrl_soc struct, to the pctlops field in the pinctrl_desc struct and never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210605185908.39982-2-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: bcm2835: Accept fewer than expected IRQsPhil Elwell
The downstream .dts files only request two GPIO IRQs. Truncate the array of parent IRQs when irq_of_parse_and_map returns 0. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210521090158.26932-1-iivanov@suse.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-20pinctrl: iproc-gpio: Remove redundant error printing in iproc_gpio_probe()Zhen Lei
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20210511085126.4287-1-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-08pinctrl: bcm63xx: Fix More dependenciesRandy Dunlap
The additional patch below fixes all of the kconfig warnings and build errors for me. Link: https://lore.kernel.org/r/9e1cec76-1c0a-9203-7995-4c2d09b711d8@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [Tweaked some other line in the BCMxxx] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-31pinctrl: bcm63xx: Fix dependenciesLinus Walleij
Add depends on OF so we don't get weird build errors on randconfig. Also order selects the same as the other drivers for pure aestetic reasons. Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-31pinctrl: bcm: bcm6362: fix warningÁlvaro Fernández Rojas
The current implementation of bcm6362_set_gpio() produces the following warning on x86_64: drivers/pinctrl/bcm/pinctrl-bcm6362.c: In function 'bcm6362_set_gpio': drivers/pinctrl/bcm/pinctrl-bcm6362.c:503:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 503 | (uint32_t) desc->drv_data, 0); | ^ Modify the code to make it similar to bcm63268_set_gpio() in order to fix the warning. Fixes: 705791e23ecd ("pinctrl: add a pincontrol driver for BCM6362") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210330103225.3949-1-noltari@gmail.com Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6318Álvaro Fernández Rojas
Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs to different functions. BCM6318 is similar to BCM6328 with the addition of a pad register, and the GPIO meaning of the mux register changes based on the GPIO number. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM63268Álvaro Fernández Rojas
Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs to different functions. Depending on the mux, these are either single pin configurations or whole pin groups. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6368Álvaro Fernández Rojas
Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 GPIOs onto alternative functions. Not all are documented. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6362Álvaro Fernández Rojas
Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual GPIO pins to the LED controller, to be available by the integrated wifi, or other functions. It also supports overlay groups, of which only NAND is documented. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6358Álvaro Fernández Rojas
Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different functions onto the GPIO pins. It does not support configuring individual pins but only whole groups. These groups may overlap, and still require the directions to be set correctly in the GPIO register. In addition the functions register controls other, not directly mux related functions. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: add a pincontrol driver for BCM6328Álvaro Fernández Rojas
Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins as GPIOs, as LEDs for the integrated LED controller, or various other functions. Its pincontrol mux registers also control other aspects, like switching the second USB port between host and device mode. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-29pinctrl: bcm: add bcm63xx base codeÁlvaro Fernández Rojas
Add a helper for registering BCM63XX pin controllers. Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18pinctrl: bcm: Simplify bool comparisonJiapeng Zhong
Fix the follow coccicheck warnings: ./drivers/pinctrl/bcm/pinctrl-ns2-mux.c:856:29-38: WARNING: Comparison to bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610705349-24310-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: bcm: fix kconfig dependency warning when !GPIOLIBNecip Fazil Yildiran
When PINCTRL_BCM2835 is enabled and GPIOLIB is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP Depends on [n]: GPIOLIB [=n] Selected by [y]: - PINCTRL_BCM2835 [=y] && PINCTRL [=y] && OF [=y] && (ARCH_BCM2835 [=n] || ARCH_BRCMSTB [=n] || COMPILE_TEST [=y]) The reason is that PINCTRL_BCM2835 selects GPIOLIB_IRQCHIP without depending on or selecting GPIOLIB while GPIOLIB_IRQCHIP is subordinate to GPIOLIB. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: 85ae9e512f43 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200914144025.371370-1-fazilyildiran@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: bcm: pinctrl-iproc-gpio: Rename incorrectly documented function paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit' drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: bcm: pinctrl-bcm281xx: Demote obvious misuse of kerneldoc to ↵Lee Jones
standard comment blocks There has been little to no attempt to document any of the demoted structures here. These are obviously not kerneldoc headers. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-11pinctrl: nsp: Set irq handler based on trig typeMark Tomlinson
Rather than always using handle_simple_irq() as the gpio_irq_chip handler, set a more appropriate handler based on the IRQ trigger type requested. This is important for level triggered interrupts which need to be masked during handling. Also, fix the interrupt acknowledge so that it clears only one interrupt instead of all interrupts which are currently active. Finally there is no need to clear the interrupt during the interrupt handler, since the edge-triggered handler will do that for us. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20200703011830.15655-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03pinctrl: bcm2835: Add support for wake-up interruptsFlorian Fainelli
Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to specifically treat the GPIO interrupts during suspend and resume, and simply implement an irq_set_wake() callback that is responsible for enabling the parent wake-up interrupt as a wake-up interrupt. To avoid allocating unnecessary resources for other chips, the wake-up interrupts are only initialized if we have a brcm,bcm7211-gpio compatibility string. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200531001101.24945-5-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03pinctrl: bcm2835: Match BCM7211 compatible stringFlorian Fainelli
The BCM7211 SoC uses the same pinconf_ops as the ones defined for the BCM2711 SoC, match the compatible string and use the correct set of options. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200531001101.24945-4-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25pinctrl: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 4b024225c4a8 ("pinctrl: use devm_platform_ioremap_resource() to simplify code") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1590234326-2194-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: bcm2835: Add support for all GPIOs on BCM2711Stefan Wahren
The BCM2711 supports 58 GPIOs. So extend pinctrl and GPIOs accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1581166975-22949-4-git-send-email-stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: bcm2835: Refactor platform dataStefan Wahren
This prepares the platform data to be easier to extend for more GPIOs. Except of this there is no functional change. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1581166975-22949-3-git-send-email-stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: bcm2835: Drop unused defineStefan Wahren
There is no usage for this define, so drop it. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1580148908-4863-2-git-send-email-stefan.wahren@i2se.com Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-29Merge tag 'pinctrl-v5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
2020-01-15pinctrl: iproc: Use platform_get_irq_optional() to avoid error messageRayagonda Kokatanur
Use platform_get_irq_optional() instead of platform_get_irq() to avoid below error message during probe: [ 0.589121] iproc-gpio 66424800.gpio: IRQ index 0 not found Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Link: https://lore.kernel.org/r/20200110035524.23511-1-rayagonda.kokatanur@broadcom.com Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-16pinctrl: iproc: Set irq handler based on trig typeHamish Martin
Rather than always using handle_simple_irq() as the gpio_irq_chip handler, set a more appropriate handler based on the IRQ trigger type requested. This is important for level triggered interrupts which need to be masked during handling. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191215210503.15488-2-hamish.martin@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-13Merge tag 'v5.4-rc5' into develLinus Walleij
Linux 5.4-rc5
2019-11-05pinctrl: use devm_platform_ioremap_resource() to simplify codeYueHaibing
devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: bcm: nsp: implement get_directionChris Packham
The get_direction api is strongly recommended to be implemented. In fact if it is not implemented gpio-hogs will not get the correct direction. Add an implementation of get_direction for the nsp-gpio driver. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20191104001819.2300-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: bcm: nsp: use gpiolib infrastructure for interruptsChris Packham
Use more of the gpiolib infrastructure for handling interrupts. The root interrupt still needs to be handled manually as it is shared with other peripherals on the SoC. This will allow multiple instances of this driver to be supported and will clean up gracefully on failure thanks to the device managed APIs. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20191104001819.2300-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: iproc: allow for error from platform_get_irq()Chris Packham
platform_get_irq() can return an error code. Allow for this when getting the irq. Fixes: 6f265e5d4da7 ("pinctrl: bcm-iproc: Pass irqchip when adding gpiochip") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191003000310.17099-2-chris.packham@alliedtelesis.co.nz Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: iproc: use unique name for irq chipChris Packham
Use the dev_name(dev) for the irqc->name so that we get unique names when we have multiple instances of this driver. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191003000310.17099-3-chris.packham@alliedtelesis.co.nz Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()Dan Carpenter
The pinctrl->functions[] array has pinctrl->num_functions elements and the pinctrl->groups[] array is the same way. These are set in ns2_pinmux_probe(). So the > comparisons should be >= so that we don't read one element beyond the end of the array. Fixes: b5aa1006e4a9 ("pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190926081426.GB2332@mwanda Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05pinctrl: bcm-iproc: Use SPDX headerLinus Walleij
This convert the BCM IPROC driver to use the SPDX header for indicating GPL v2.0 only licensing. Cc: Pramod Kumar <pramodku@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20191002130217.4491-1-linus.walleij@linaro.org