aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2021-11-05Merge tag 'pinctrl-v5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The most interesting aspect is that we now have initial support for the Apple pin controller as used in the M1 laptops and the iPhones which is a step forward for using Linux efficiently on this Apple silicon. Core changes: - Add infrastructure for per-parent interrupt data to support the Apple pin controller. New drivers: - New combined pin control and GPIO driver for the Apple SoC. This is used in all modern Apple silicon such as the M1 laptops but also in at least recent iPhone variants. - New subdriver for the Qualcomm SM6350 - New subdriver for the Qualcomm QCM2290 - New subdriver for the Qualcomm PM6350 - New subdriver for the Uniphier NX1 - New subdriver for the Samsung ExynosAutoV9 - New subdriver for the Mediatek MT7986 - New subdriver for the nVidia Tegra194 Improvements: - Improve power management in the Mediatek driver. - Improvements to the Renesas internal consistency checker. - Convert the Rockchip pin control device tree bindings to YAML. - Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to use hierarchical interrupts. - Convert the Qualcomm PMIC MPP device tree bindings to YAML" * tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits) pinctrl: add pinctrl/GPIO driver for Apple SoCs dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl gpio: Allow per-parent interrupt data pinctrl: tegra: Fix warnings and error pinctrl: intel: Kconfig: Add configuration menu to Intel pin control pinctrl: tegra: Use correct offset for pin group pinctrl: core: fix possible memory leak in pinctrl_enable() pinctrl: bcm2835: Allow building driver as a module pinctrl: equilibrium: Fix function addition in multiple groups pinctrl: tegra: Add pinmux support for Tegra194 pinctrl: tegra: include lpdr pin properties pinctrl: mediatek: add support for MT7986 SoC dt-bindings: pinctrl: update bindings for MT7986 SoC pinctrl: microchip sgpio: use reset driver dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip pinctrl: qcom: spmi-mpp: hardcode IRQ counts pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip ...
2021-10-27pinctrl: add pinctrl/GPIO driver for Apple SoCsJoey Gouly
This driver adds support for the pinctrl / GPIO hardware found on some Apple SoCs. Co-developed-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Acked-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211026175815.52703-5-joey.gouly@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26pinctrl: tegra: Fix warnings and errorPrathamesh Shete
Fix warnings are errors caused by commit a42c7d95d29e ("pinctrl: tegra: Use correct offset for pin group"). Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26pinctrl: intel: Kconfig: Add configuration menu to Intel pin controlCai Huoqing
Adding a configuration menu to hold many Intel pin control drivers helps to make the display more concise. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-26pinctrl: tegra: Use correct offset for pin groupPrathamesh Shete
Function tegra_pinctrl_gpio_request_enable() and tegra_pinctrl_gpio_disable_free() uses pin offset instead of group offset, causing the driver to use wrong offset to enable gpio. Add a helper function tegra_pinctrl_get_group() to parse the pin group and determine correct offset. Signed-off-by: Kartik K <kkartik@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211025110959.27751-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-25pinctrl: core: fix possible memory leak in pinctrl_enable()Yang Yingliang
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888020a7a680 (size 64): comm "i2c-mcp23018-41", pid 23090, jiffies 4295160544 (age 8.680s) hex dump (first 32 bytes): 00 48 d3 1e 80 88 ff ff 00 1a 56 c1 ff ff ff ff .H........V..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000083c79b35>] kmem_cache_alloc_trace+0x16d/0x360 [<0000000051803c95>] pinctrl_init_controller+0x6ed/0xb70 [<0000000064346707>] pinctrl_register+0x27/0x80 [<0000000029b0e186>] devm_pinctrl_register+0x5b/0xe0 [<00000000391f5a3e>] mcp23s08_probe_one+0x968/0x118a [pinctrl_mcp23s08] [<000000006112c039>] mcp230xx_probe+0x266/0x560 [pinctrl_mcp23s08_i2c] If pinctrl_claim_hogs() fails, the 'pindesc' allocated in pinctrl_register_one_pin() need be freed. Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211022014323.1156924-1-yangyingliang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-25pinctrl: bcm2835: Allow building driver as a moduleFlorian Fainelli
Update the pinctrl-bcm2835 driver to support being built as as a module by converting it to a module_platform_driver() with the appropriate module license, authors and description. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Link: https://lore.kernel.org/r/20211019221127.1953001-1-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-25pinctrl: equilibrium: Fix function addition in multiple groupsRahul Tanwar
Ignore the same function with multiple groups. Fix a typo in error print. Fixes: 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Link: https://lore.kernel.org/r/20211020093815.20870-1-rtanwar@maxlinear.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-24pinctrl: tegra: Add pinmux support for Tegra194Prathamesh Shete
This change adds pinmux table entries for Tegra194 Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211018121815.3017-2-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-24pinctrl: tegra: include lpdr pin propertiesSuresh Mangipudi
Update lpdr pin-property for supported pins. lpdr property help disable most basic driver fingers leaving only minimal base driver finger. Signed-off-by: Suresh Mangipudi <smangipudi@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/r/20211018121815.3017-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-24pinctrl: mediatek: add support for MT7986 SoCSam Shih
This commit includes pinctrl driver for Mediatek MT7986 The difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65 do not exist on mt7986b Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20211022124036.5291-3-sam.shih@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-24pinctrl: microchip sgpio: use reset driverHoratiu Vultur
On lan966x platform when the switch gets reseted then also the sgpio gets reseted. The fix for this is to extend also the sgpio driver to call the reset driver which will be reseted only once by the first driver that is probed. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chipDmitry Baryshkov
spmi-mpp did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the spmi-mpp code to correct this issue. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-17-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17pinctrl: qcom: spmi-mpp: hardcode IRQ countsDmitry Baryshkov
The probing of this driver calls platform_irq_count, which will setup all of the IRQs that are configured in device tree. In preparation for converting this driver to be a hierarchical IRQ chip, hardcode the IRQ count based on the hardware type so that all the IRQs are not configured immediately and are configured on an as-needed basis later in the boot process. This change will also allow for the removal of the interrupts property later in this patch series once the hierarchical IRQ chip support is in. This patch also removes the generic qcom,spmi-mpp OF match since we don't know the number of pins. All of the existing upstream bindings already include the more-specific binding. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-16-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chipDmitry Baryshkov
ssbi-mpp did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the ssbi-mpp code to correct this issue. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-15-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17pinctrl: qcom: ssbi-mpp: hardcode IRQ countsDmitry Baryshkov
The probing of this driver calls platform_irq_count, which will setup all of the IRQs that are configured in device tree. In preparation for converting this driver to be a hierarchical IRQ chip, hardcode the IRQ count based on the hardware type so that all the IRQs are not configured immediately and are configured on an as-needed basis later in the boot process. This change will also allow for the removal of the interrupts property later in this patch series once the hierarchical IRQ chip support is in. This patch also removes the generic qcom,ssbi-mpp OF match since we don't know the number of pins. All of the existing upstream bindings already include the more-specific binding. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-14-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17pinctrl: samsung: support ExynosAutov9 SoC pinctrlChanho Park
Add pinctrl data for ExynosAuto v9 SoC. - GPA0, GPA1: 10, External wake up interrupt - GPQ0: 2, XbootLDO, Speedy PMIC I/F - GPB0, GPB1, GPB2, GPB3: 29, I2S 7 CH - GPF0, GPF1, GPF2, GPF3,GPF4, GPF5, GPF6, GPF8: 52, FSYS - GPG0, GPG1, GPG2, GPG3: 25, GPIO x 24, SMPL_INT - GPP0, GPP1, GPP2, GPP3, GPP4, GPP5: 48, USI 12 CH Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211008091443.44625-2-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211017171912.5044-1-krzysztof.kozlowski@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-17Merge tag 'renesas-pinctrl-for-v5.16-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.16 (take two) - Add MediaLB pins on R-Car H3, M3-W/W+, and M3-N. - Miscellaneous fixes and improvements.
2021-10-16pinctrl: amd: disable and mask interrupts on probeSachi King
Some systems such as the Microsoft Surface Laptop 4 leave interrupts enabled and configured for use in sleep states on boot, which cause unexpected behaviour such as spurious wakes and failed resumes in s2idle states. As interrupts should not be enabled until they are claimed and explicitly enabled, disabling any interrupts mistakenly left enabled by firmware should be safe. Signed-off-by: Sachi King <nakato@nakato.io> Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-15pinctrl: renesas: checker: Prefix common checker outputGeert Uytterhoeven
Add a "sh_pfc: " prefix to common checker output that is not yet prefixed by a subdriver-specific prefix ("<SoC-part-number>_pfc: "), for easier grepping. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/9cf1dc9f895dc5fa74125dabddfe46fecf438b4f.1633615652.git.geert+renesas@glider.be
2021-10-15pinctrl: renesas: checker: Fix bias checks on SoCs with pull-down only pinsGeert Uytterhoeven
If some bits in a pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up, there are two pinmux_bias_reg entries: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. On encountering the second entry, where puen is NULL, the for-loop terminates early, causing the remaining bias registers not to be checked. In addition, sh_pfc_check_bias_reg() does not handle such entries. Fix this by treating pinmux_bias_reg.puen and pinmux_bias_reg.pud the same. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/29526d06fa223cffd785cdb264b756a202b11cea.1633615652.git.geert+renesas@glider.be
2021-10-15pinctrl: renesas: checker: Move overlapping field checkGeert Uytterhoeven
Move the check for overlapping drive register fields from sh_pfc_check_drive_reg() to sh_pfc_check_reg(), so it can be used for other register types, too. This requires passing the covered register bits to sh_pfc_check_reg(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/9d75057200890bbf31e226ffcc4514ecc5bc2c34.1633615652.git.geert+renesas@glider.be
2021-10-15pinctrl: renesas: checker: Fix off-by-one bug in drive register checkGeert Uytterhoeven
The GENMASK(h, l) macro creates a contiguous bitmask starting at bit position @l and ending at position @h, inclusive. This did not trigger any error checks, as the individual register fields cover at most 3 of the 4 available bits. Fixes: 08df16e07ad0a1ec ("pinctrl: sh-pfc: checker: Add drive strength register checks") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be
2021-10-15pinctrl: renesas: Fix save/restore on SoCs with pull-down only pinsGeert Uytterhoeven
If some bits in a pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up, there are two pinmux_bias_reg entries: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. On encountering the second entry, where puen is NULL, the for-loop terminates early, causing the remaining bias registers not to be saved/restored during PSCI system suspend. Fortunately this does not trigger on any supported system yet, as PSCI is only used on R-Car Gen3 and RZ/G2 systems, which all have separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers. Avoid this ever becoming a problem by treating pinmux_bias_reg.puen and pinmux_bias_reg.pud the same. Note that a register controlling both pull-up and pull-down pins would be saved and restored twice, which is harmless. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/59d2fbddff685b6a7a82ff17d2b37633e30e8860.1633615652.git.geert+renesas@glider.be
2021-10-15pinctrl: renesas: r8a779[56]x: Add MediaLB pinsAndrey Gusakov
This adds pins, groups, and functions for MediaLB devices on Renesas R-Car H3 and M3-W/N SoCs. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20211007200250.20661-1-nikita.yoush@cogentembedded.com [geert: Fix automotive handling] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-14pinctrl: gemini: fix typosDu Huanpeng
Signed-off-by: Du Huanpeng <dhu@hodcarrier.org> Link: https://lore.kernel.org/r/1633879405-11658-1-git-send-email-dhu@hodcarrier.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()Fabien Dessenne
When resuming from low power, the driver attempts to restore the configuration of some pins. This is done by a call to: stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin) where 'pin' must be a valid pin value (i.e. matching some 'groups->pin'). Fix the current implementation which uses some wrong 'pin' value. Fixes: e2f3cf18c3e2 ("pinctrl: stm32: add suspend/resume management") Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14pinctrl: stm32: do not warn when 'st,package' is absentFabien Dessenne
Since the 'st,package' property is optional, outputting the "No package detected" warning-level log when the property is absent is unsuitable. Remove that log. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211008122454.617556-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"Rafał Miłecki
This reverts commit a49d784d5a8272d0f63c448fe8dc69e589db006e. The updated binding was wrong / invalid and has been reverted. There isn't any upstream kernel DTS using it and Broadcom isn't known to use it neither. There is close to zero chance this will cause regression for anyone. Actually in-kernel bcm5301x.dtsi still uses the old good binding and so it's broken since the driver update. This revert fixes it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-13pinctrl: uniphier: Add UniPhier NX1 pinctrl driverKunihiko Hayashi
Add pin configuration and pinmux support for UniPhier NX1 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1633518606-8298-4-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-13pinctrl: uniphier: Add extra audio pinmux settings for LD11, LD20 and PXs3 SoCsKunihiko Hayashi
Add extra audio I/O pinmux setting for LD11, LD20 and PXs3 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1633518606-8298-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-13pinctrl: qcom: spmi-gpio: Add compatible for PM6350Luca Weiss
Add support for the GPIO controller in the pm6350 PMIC. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20211007212444.328034-6-luca@z3ntu.xyz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-08Merge tag 'asm-generic-fixes-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-03Merge tag 'renesas-pinctrl-for-v5.16-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.16 - Fix duplicate port register on RZ/G2L, - A minor improvement.
2021-10-03pinctrl: mediatek: add rsel setting on MT8195Zhiyong Tao
I2C pins's resistance value can be controlled by rsel register. This patch provides rsel (resistance selection) setting on MT8195 Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210924080632.28410-6-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-03pinctrl: mediatek: support rsel featureZhiyong Tao
This patch supports rsel(resistance selection) feature for I2C pins. It provides more resistance selection solution in different ICs. It provides rsel define and si unit solution by identifying "mediatek,rsel_resistance_in_si_unit" property in pio dtsi node. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210924080632.28410-5-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-03pinctrl: mediatek: fix coding styleZhiyong Tao
Fix Camel spelling coding style to avoid checkpatch warning in a following patch. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210924080632.28410-4-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-03pinctrl: qcom: spmi-gpio: add support to enable/disable outputSubbaraman Narayanamurthy
Currently, if the GPIO is configured as output in the bootloader and user changes the mode to input in HLOS, it would end up getting configured as input/output. Functionally, this is fine; however, there may be some requirements where the output needs to be disabled so that it can be used only for input. Add support to enable/disable output mode through "output-enable" or "output-disable" pinctrl properties. Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1631588246-4811-3-git-send-email-quic_subbaram@quicinc.com [Drop copyright change which is already upstrean in -rcN] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-24pinctrl: renesas: rzg2l: Fix missing port register 21hBiju Das
Remove the duplicate port register 22h and replace it with missing port register 21h. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210922074140.22178-1-biju.das.jz@bp.renesas.com Fixes: c4c4637eb57f2a25 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-09-23pinctrl: qcom: Add QCM2290 pinctrl driverShawn Guo
It's a porting of pinctrl-scuba driver from CAF msm-4.19 kernel. The egpio and wake bits are removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210923033224.29719-3-shawn.guo@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-23pinctrl: qcom: Add SM6350 pinctrl driverKonrad Dybcio
This adds pincontrol driver for tlmm block found in SM6350 SoC This patch is based on downstream copyleft code. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210923161450.15278-2-konrad.dybcio@somainline.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-23pinctrl: qcom: sc7280: Add PM suspend callbacksRajendra Nayak
Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-18pinctrl/rockchip: add a queue for deferred pin output settings on probeHeiko Stuebner
The separation of pinctrl and gpio drivers created a tiny window where a pinconfig setting might produce a null-pointer dereference. The affected device were rk3288-veyron devices in this case. Pinctrl-hogs are claimed when the pinctrl driver is registered, at which point their pinconfig settings will be applied. At this time the now separate gpio devices will not have been created yet and the matching driver won't have probed yet, making the gpio->foo() call run into a null-ptr. As probing is not really guaranteed to have been completed at a specific time, introduce a queue that can hold the output settings until the gpio driver has probed and will (in a separate patch) fetch the elements of the list. We expect the gpio driver to empty the list, but will nevertheless empty it ourself on remove if that didn't happen. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210913224926.1260726-4-heiko@sntech.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-18pinctrl: qcom: msm8226: fill in more functionsLuca Weiss
Add the functions for QUP4 (spi, uart, uim & i2c), sdc3 and audio_pcm as derived from the downstream gpiomux configuration. Also sort the functions alphabetically, while we're at it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210911232707.259615-2-luca@z3ntu.xyz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: qcom: spmi-gpio: correct parent irqspec translationDavid Collins
pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: amd: Handle wake-up interruptBasavaraj Natikar
Enable/disable power management wakeup mode, which is disabled by default. enable_irq_wake enables wakes the system from sleep. Hence added enable/disable irq_wake to handle wake-up interrupt. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210831120613.1514899-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: amd: Add irq field dataBasavaraj Natikar
pinctrl_amd use gpiochip_get_data() to get their local state containers back from the gpiochip passed as amd_gpio chip data. Hence added irq field data to get directly using amd_gpio chip data. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210831120613.1514899-2-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: mediatek: mt8195: Add pm_opsZhiyong Tao
Setting this up will configure wake from suspend properly, and wake only for the interrupts that are setup in wake_mask, not all interrupts. Fixes: 6cf5e9ef362af824de2e4e8afb78d74537f1e3db ("pinctrl: add pinctrl driver on mt8195") Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210911071046.17349-2-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: Fix spelling mistake "atleast" -> "at least"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210826123516.14441-1-colin.king@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 07:29:56 +0000