aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-08-05Merge tag 'gpio-v5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.9 kernel cycle. There is nothing too exciting in it, but a new macro that fixes a build failure on a minor ARM32 platform that appeared yesterday is part of it so we better merge it. Core changes: - Introduce the for_each_requested_gpio() macro to help in dependent code all over the place. Also patch a few locations to use it while we are at it. - Split out the sysfs code into its own file. - Split out the character device code into its own file, then make a set of refactorings and improvements to this code. We are setting the stage to revamp the userspace API a bit in the next cycle. - Fix a whole slew of kerneldoc that was wrong or missing. New drivers: - The PCA953x driver now supports the PCAL9535. Driver improvements: - A host of incremental modernizations and improvements to the PCA953x driver. - Incremental improvements to the Xilinx Zynq driver. - Some improvements to the GPIO aggregator driver. - I ran all over the place switching all threaded and other drivers requesting their own IRQ while using the core GPIO IRQ helpers to pass the GPIO irq chip as a template instead of calling the explicit set-up functions. Next merge window we may retire the old code altogether" * tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits) gpio: wcove: Request IRQ after all initialisation done gpio: crystalcove: Free IRQ on error path gpio: pca953x: Request IRQ after all initialisation done gpio: don't use same lockdep class for all devm_gpiochip_add_data users gpio: max732x: Use irqchip template gpio: stmpe: Move chip registration gpio: rcar: Use irqchip template gpio: regmap: fix type clash gpio: Correct kernel-doc inconsistency gpio: pci-idio-16: Use irqchip template gpio: pcie-idio-24: Use irqchip template gpio: 104-idio-16: Use irqchip template gpio: 104-idi-48: Use irqchip template gpio: 104-dio-48e: Use irqchip template gpio: ws16c48: Use irqchip template gpio: omap: improve coding style for pin config flags gpio: dln2: Use irqchip template gpio: sch: Add a blank line between declaration and code gpio: sch: changed every 'unsigned' to 'unsigned int' gpio: ich: changed every 'unsigned' to 'unsigned int' ...
2020-08-04pinctrl: stmfx: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit calls to gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip(). The irqchip is instead added while adding the gpiochip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://lore.kernel.org/r/20200721131814.357182-1-linus.walleij@linaro.org
2020-08-04pinctrl: amd: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add(). The irqchip is instead added while adding the gpiochip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Cc: Sandeep Singh <sandeep.singh@amd.com> Link: https://lore.kernel.org/r/20200722101545.144373-1-linus.walleij@linaro.org
2020-08-04pinctrl: mediatek: fix build for tristate changesRandy Dunlap
Export mtk_is_virt_gpio() for the case when CONFIG_PINCTRL_MTK=y CONFIG_PINCTRL_MTK_V2=y CONFIG_PINCTRL_MTK_MOORE=y CONFIG_PINCTRL_MTK_PARIS=m to fix this build error: ERROR: modpost: "mtk_is_virt_gpio" [drivers/pinctrl/mediatek/pinctrl-paris.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@kernel.org> Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/d15827a3-d0c8-e231-9f61-8507b3d7be3a@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: samsung: Use bank name as irqchip nameMarek Szyprowski
Use the bank name as the irqchip name. This name is later visible in /proc/interrupts, what makes it possible to easily identify each GPIO interrupt. /proc/interrupts before this patch: 143: 0 exynos4210_wkup_irq_chip 7 Edge hdmi 144: 0 exynos4210_wkup_irq_chip 6 Level wm8994 145: 1 exynos4210_wkup_irq_chip 7 Edge max77686-pmic, max77686-rtc 146: 1 exynos_gpio_irq_chip 3 Edge 3-0048 /proc/interrupts after this patch: 143: 0 gpx3 7 Edge hdmi 144: 0 gpx3 6 Level wm8994 145: 1 gpx0 7 Edge max77686-pmic, max77686-rtc 146: 1 gpm2 3 Edge 3-0048 Handling of the eint_wake_mask_value has been reworked, because each bank has now its own exynos_irq_chip structure allocated. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200720145412.24221-1-krzk@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: core: print gpio in pins debugfs fileDrew Fustini
If there is a gpio range mapping for the pin, then print out the gpio chip and line index for the pin in the debugfs 'pins' file with the format: "[line-index]:[gpio-label]" Here is example output on the BeagleBoard.org PocketBeagle (AM3358): /sys/kernel/debug/pinctrl/44e10800.pinmux-pinctrl-single/pins pin 25 (PIN25) 25:gpio-32-63 44e10864 00000037 pinctrl-single pin 26 (PIN26) 26:gpio-32-63 44e10868 00000037 pinctrl-single pin 27 (PIN27) 27:gpio-32-63 44e1086c 00000037 pinctrl-single pin 28 (PIN28) 0:? 44e10870 00000036 pinctrl-single pin 29 (PIN29) 0:? 44e10874 00000006 pinctrl-single pin 30 (PIN30) 28:gpio-32-63 44e10878 00000027 pinctrl-single pin 31 (PIN31) 29:gpio-32-63 44e1087c 00000037 pinctrl-single pin 32 (PIN32) 30:gpio-32-63 44e10880 00000037 pinctrl-single pin 33 (PIN33) 31:gpio-32-63 44e10884 00000037 pinctrl-single pin 34 (PIN34) 0:gpio-64-95 44e10888 00000037 pinctrl-single pin 35 (PIN35) 1:gpio-64-95 44e1088c 00000037 pinctrl-single Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200722122751.266440-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: add mt6779 eint supportHanks Chen
add driver setting to support mt6779 eint Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-6-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: add pinctrl support for MT6779 SoCHanks Chen
This adds MT6779 pinctrl driver based on MediaTek pinctrl-paris core. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-5-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: avoid virtual gpio trying to set regHanks Chen
for virtual gpios, they should not do reg setting and should behave as expected for eint function. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-4-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-01Merge tag 'pinctrl-v5.8-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fix from Linus Walleij: "A single last minute pin control fix to the Qualcomm driver fixing missing dual edge PCH interrupts" * tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
2020-07-23pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() APIFabien Dessenne
Use the hwspin_lock_timeout_in_atomic() API which is the most appropriated here. Indeed: - hwspin_lock_() is called after spin_lock_irqsave() - the hwspin_lock_timeout() API relies on jiffies count which won't work if IRQs are disabled which is the case here. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20200615124456.27328-1-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-23pinctrl: mcp23s08: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit calls to gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip(). The irqchip is instead added while adding the gpiochip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Phil Reid <preid@electromag.com.au> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Jason Kridner <jkridner@gmail.com> Link: https://lore.kernel.org/r/20200721125223.344411-1-linus.walleij@linaro.org
2020-07-23pinctrl: sx150x: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit calls to gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip(). The irqchip is instead added while adding the gpiochip. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200721132537.362160-1-linus.walleij@linaro.org
2020-07-22Merge tag 'intel-pinctrl-v5.9-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.9-1 * New driver for Emmitsburg * New driver for Tiger Lake-H * Part 3 of Cherryview driver clean up * Fix a glitch on Baytrail platforms The following is an automated git shortlog grouped by driver: ARM/orion/gpio: - Make use of for_each_requested_gpio() at91: - Make use of for_each_requested_gpio() baytrail: - Use fallthrough pseudo-keyword - Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH) - Drop no-op ACPI_PTR() call cherryview: - Re-use data structures from pinctrl-intel.h (part 3) - Convert chv_writel() to use chv_padreg() - Introduce helpers to IO with common registers - Introduce chv_readl() helper gpio: - xra1403: Make use of for_each_requested_gpio() - mvebu: Make use of for_each_requested_gpio() gpiolib: - Introduce for_each_requested_gpio_in_range() macro intel: - Add Intel Emmitsburg pin controller support - Make use of for_each_requested_gpio_in_range() - Protect IO in few call backs by lock - Split intel_config_get() to three functions - Drop the only label in the code for consistency - Get rid of redundant 'else' in intel_config_set_debounce() - Make use of IRQ_RETVAL() - Reduce scope of the lock - Disable input and output buffer when switching to GPIO - Allow drivers to define ACPI address space ID - Allow drivers to define total amount of IRQs per community lynxpoint: - Drop no-op ACPI_PTR() call - Introduce helpers to enable or disable input - Make use of for_each_requested_gpio() merrifield: - Add I²S bus 2 pins to groups and functions - Update pin names in accordance with official list tigerlake: - Add support for Tiger Lake-H
2020-07-21pinctrl: intel: Add Intel Emmitsburg pin controller supportAndy Shevchenko
This driver adds pinctrl/GPIO support for Intel Emmitsburg PCH. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-07-20pinctl: ti: iodelay: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718120807.19714-1-grandmaster@al2klimov.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-20pinctrl: single: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200716212317.GA17754@embeddedor Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-20pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200716212213.GA17623@embeddedor Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-19pinctrl: baytrail: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-07-17pinctrl: lpc18xx: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200716212109.GA17525@embeddedor Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-17Merge tag 'sh-pfc-for-v5.9-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.9 (take two) - Add support for the new RZ/G2H (R8A774E1) SoC, - One more conversion of DT bindings to json-schema, - Fix RZ/A1 kerneldoc.
2020-07-17pinctrl: rockchip: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200713183541.36963-1-grandmaster@al2klimov.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-amd: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, 'struct amd_gpio_acpi_match' becomes defined but unused. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-amd.c:959:36: warning: ‘amd_gpio_acpi_match’ defined but not used [-Wunused-const-variable=] 959 | static const struct acpi_device_id amd_gpio_acpi_match[] = { Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Ken Xue <Ken.Xue@amd.com> Cc: "Wu, Jeff" <Jeff.Wu@amd.com> Cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Cc: Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20200713144930.1034632-26-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: mvebu: pinctrl-armada-37xx: Update documentation block for 'struct ↵Lee Jones
armada_37xx_pin_group' Correct misspellings and provide missing entries. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'start_pin' not described in 'armada_37xx_pin_group' drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'val' not described in 'armada_37xx_pin_group' drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_pin' not described in 'armada_37xx_pin_group' drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:68: warning: Function parameter or member 'extra_npins' not described in 'armada_37xx_pin_group' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lore.kernel.org/r/20200713144930.1034632-25-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: meson: pinctrl-meson-a1: Remove unused const variable ↵Lee Jones
'i2c_slave_groups' It has never been used. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/meson/pinctrl-meson-a1.c:749:27: warning: ‘i2c_slave_groups’ defined but not used [-Wunused-const-variable=] 749 | static const char const i2c_slave_groups[] = { | ^~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Qianggui Song <qianggui.song@amlogic.com> Cc: linux-amlogic@lists.infradead.org Link: https://lore.kernel.org/r/20200713144930.1034632-24-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: tegra: pinctrl-tegra194: Do not initialise field twiceLee Jones
Both PIN_PINGROUP_ENTRY_Y() and DRV_PINGROUP_ENTRY_Y() macros are called for each of the 2 pin groups defined here, and both of them initialise 'drv_reg', causing the compiler to complain. Only initialise 'drv_reg' once. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init] 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’ 128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[0].drv_reg’) 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:105:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 105 | DRV_PINGROUP_ENTRY_Y(0x14004, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_clkreq_n_pgg0’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:128:2: note: in expansion of macro ‘PINGROUP’ 128 | PINGROUP(pex_l5_clkreq_n_pgg0, PE5, RSVD1, RSVD2, RSVD3, 0x14000, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: warning: initialized field overwritten [-Woverride-init] 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’ 130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0, | ^~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:71:14: note: (near initialization for ‘tegra194_groups[1].drv_reg’) 71 | .drv_reg = ((r)), | ^ drivers/pinctrl/tegra/pinctrl-tegra194.c:107:2: note: in expansion of macro ‘DRV_PINGROUP_ENTRY_Y’ 107 | DRV_PINGROUP_ENTRY_Y(0x1400c, 12, 5, 20, 5, -1, -1, -1, -1, 0) | ^~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:124:3: note: in expansion of macro ‘drive_pex_l5_rst_n_pgg1’ 124 | drive_##pg_name, | ^~~~~~ drivers/pinctrl/tegra/pinctrl-tegra194.c:130:2: note: in expansion of macro ‘PINGROUP’ 130 | PINGROUP(pex_l5_rst_n_pgg1, PE5, RSVD1, RSVD2, RSVD3, 0x14008, 0, | ^~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-23-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-single: Fix struct/function documentation blocksLee Jones
Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180Douglas Anderson
Depending on how you look at it, you can either say that: a) There is a PDC hardware issue (with the specific IP rev that exists on sc7180) that causes the PDC not to work properly when configured to handle dual edges. b) The dual edge feature of the PDC hardware was only added in later HW revisions and thus isn't in all hardware. Regardless of how you look at it, let's work around the lack of dual edge support by only ever letting our parent see requests for single edge interrupts on affected hardware. NOTE: it's possible that a driver requesting a dual edge interrupt might get several edges coalesced into a single IRQ. For instance if a line starts low and then goes high and low again, the driver that requested the IRQ is not guaranteed to be called twice. However, it is guaranteed that once the driver's interrupt handler starts running its first instruction that any new edges coming in will cause the interrupt to fire again. This is relatively commonplace for dual-edge gpio interrupts (many gpio controllers require software to emulate dual edge with single edge) so client drivers should be setup to handle it. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200714080254.v3.1.Ie0d730120b232a86a4eac1e2909bcbec844d1766@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-rockchip: Fix a bunch of kerneldoc misdemeanoursLee Jones
Demote headers which are clearly not kerneldoc, provide titles for struct definition blocks, fix API slip (bitrot) misspellings and provide some missing entries. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux ' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type' drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data' drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */ on line 109 - I thought it was a doc line drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group' drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-rockchip@lists.infradead.org Link: https://lore.kernel.org/r/20200713144930.1034632-20-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-bm1880: Rename ill documented struct attribute entriesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pctrldev' not described in 'bm1880_pinctrl' drivers/pinctrl/pinctrl-bm1880.c:40: warning: Function parameter or member 'pinconf' not described in 'bm1880_pinctrl' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200713144930.1034632-19-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-at91: Demote non-kerneldoc header and complete anotherLee Jones
The documentation header for 'struct at91_pinctrl_mux_ops' was missing entries for {g,s}et_drivestrength and {g,s}et_slewrate. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-at91.c:77: warning: cannot understand function prototype: 'enum drive_strength_bit ' drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_drivestrength' not described in 'at91_pinctrl_mux_ops' drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_drivestrength' not described in 'at91_pinctrl_mux_ops' drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'get_slewrate' not described in 'at91_pinctrl_mux_ops' drivers/pinctrl/pinctrl-at91.c:187: warning: Function parameter or member 'set_slewrate' not described in 'at91_pinctrl_mux_ops' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Link: https://lore.kernel.org/r/20200713144930.1034632-18-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-at91-pio4: PM related attribute descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_wakeup_sources' not described in 'atmel_pioctrl' drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_suspend_backup' not described in 'atmel_pioctrl' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200713144930.1034632-16-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinconf-generic: Add function parameter description 'pctldev'Lee Jones
Fix a spelling/typo while we're here. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinconf-generic.c:242: warning: Function parameter or member 'pctldev' not described in 'pinconf_generic_parse_dt_config' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200713144930.1034632-15-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: devicetree: Add one new attribute description and rename another twoLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'map' not described in 'pinctrl_dt_map' drivers/pinctrl/devicetree.c:27: warning: Function parameter or member 'num_maps' not described in 'pinctrl_dt_map' drivers/pinctrl/devicetree.c:409: warning: Function parameter or member 'out_args' not described in 'pinctrl_parse_index_with_args' drivers/pinctrl/devicetree.c:409: warning: Excess function parameter 'out_arts' description in 'pinctrl_parse_index_with_args' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200713144930.1034632-14-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinmux: Add some missing parameter descriptionsLee Jones
And rename another which has probably bitrotted. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinmux.c:83: warning: Function parameter or member 'pctldev' not described in 'pinmux_can_be_used_for_gpio' drivers/pinctrl/pinmux.c:108: warning: Function parameter or member 'pctldev' not described in 'pin_request' drivers/pinctrl/pinmux.c:261: warning: Function parameter or member 'gpio' not described in 'pinmux_request_gpio' drivers/pinctrl/pinmux.c:751: warning: Function parameter or member 'selector' not described in 'pinmux_generic_get_function' drivers/pinctrl/pinmux.c:751: warning: Excess function parameter 'group_selector' description in 'pinmux_generic_get_function' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200713144930.1034632-13-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: core: Fix a bunch of kerneldoc issuesLee Jones
Most are likely due to bitrot/API slip. Some are formatting issues. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/core.c:167: warning: Function parameter or member 'pin' not described in 'pin_get_name' drivers/pinctrl/core.c:167: warning: Excess function parameter 'name' description in 'pin_get_name' drivers/pinctrl/core.c:584: warning: Function parameter or member 'selector' not described in 'pinctrl_generic_get_group' drivers/pinctrl/core.c:584: warning: Excess function parameter 'gselector' description in 'pinctrl_generic_get_group' drivers/pinctrl/core.c:1356: error: Cannot parse struct or union! drivers/pinctrl/core.c:1458: warning: Function parameter or member 'map' not described in 'pinctrl_unregister_mappings' drivers/pinctrl/core.c:1458: warning: Excess function parameter 'maps' description in 'pinctrl_unregister_mappings' drivers/pinctrl/core.c:2239: warning: Function parameter or member 'pctldev' not described in 'devm_pinctrl_register_and_init' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200713144930.1034632-12-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: mediatek: pinctrl-mtk-common-v2: Mark ↵Lee Jones
'mtk_default_register_base_names' as __maybe_unused Not all sourcefiles which end up including pinctrl-mtk-common-v2.h make use of 'mtk_default_register_base_names' and there is nowhere we can place the definition to void the need for __maybe_unused except its own headerfile, which seems like overkill. So instead we tell the compiler that it's okay for it to be unused by some of the consumers. Fixes the following W=1 kernel build warning(s): In file included from drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:19: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-moore.h:25, from drivers/pinctrl/mediatek/pinctrl-moore.c:12: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-paris.c:15: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h:15, from drivers/pinctrl/mediatek/pinctrl-mt6797.c:13: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h:12, from drivers/pinctrl/mediatek/pinctrl-mt8183.c:9: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h:12, from drivers/pinctrl/mediatek/pinctrl-mt6765.c:10: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Sean Wang <sean.wang@kernel.org> Cc: Sean Wang <sean.wang@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/20200713144930.1034632-11-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: qcom: pinctrl-msm8976: Remove unused variable 'nav_tsync_groups'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/qcom/pinctrl-msm8976.c:802:27: warning: ‘nav_tsync_groups’ defined but not used [-Wunused-const-variable=] 802 | static const char const nav_tsync_groups[] = { | ^~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Del Regno <kholk11@gmail.com> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-10-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: samsung: pinctrl-s3c64xx: Fix formatting issuesLee Jones
Kerneldoc struct titles must be followed by whitespace else the checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/samsung/pinctrl-s3c64xx.c:212: warning: cannot understand function prototype: 'struct s3c64xx_eint0_domain_data ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-9-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: samsung: pinctrl-s3c24xx: Fix formatting issuesLee Jones
Kerneldoc struct titles must be followed by whitespace. Also attributes need to be in the format '@.*: ' else the checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/samsung/pinctrl-s3c24xx.c:100: warning: cannot understand function prototype: 'struct s3c24xx_eint_domain_data ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-8-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: samsung: pinctrl-samsung: Demote obvious misuse of kerneldoc to ↵Lee Jones
standard comment blocks No attempt has been made to document either of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/samsung/pinctrl-samsung.c:1149: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_suspend' drivers/pinctrl/samsung/pinctrl-samsung.c:1199: warning: Function parameter or member 'dev' not described in 'samsung_pinctrl_resume' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-7-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: qcom: pinctrl-msm: Complete 'struct msm_pinctrl' documentationLee Jones
Add missing descriptions for attributes and fix 1 formatting issue. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'desc' not described in 'msm_pinctrl' drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'irq_chip' not described in 'msm_pinctrl' drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'intr_target_use_scm' not described in 'msm_pinctrl' drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'soc' not described in 'msm_pinctrl' drivers/pinctrl/qcom/pinctrl-msm.c:75: warning: Function parameter or member 'phys_base' not described in 'msm_pinctrl' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-6-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: bcm: pinctrl-iproc-gpio: Rename incorrectly documented function paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Function parameter or member 'chip' not described in 'iproc_set_bit' drivers/pinctrl/bcm/pinctrl-iproc-gpio.c:141: warning: Excess function parameter 'iproc_gpio' description in 'iproc_set_bit' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Link: https://lore.kernel.org/r/20200713144930.1034632-5-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: bcm: pinctrl-bcm281xx: Demote obvious misuse of kerneldoc to ↵Lee Jones
standard comment blocks There has been little to no attempt to document any of the demoted structures here. These are obviously not kerneldoc headers. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/bcm/pinctrl-bcm281xx.c:65: warning: cannot understand function prototype: 'enum bcm281xx_pin_type ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:79: warning: cannot understand function prototype: 'struct bcm281xx_pin_function ' drivers/pinctrl/bcm/pinctrl-bcm281xx.c:89: warning: cannot understand function prototype: 'struct bcm281xx_pinctrl_data ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200713144930.1034632-4-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: sirf: pinctrl-atlas7: Fix a bunch of documentation misdemeanoursLee Jones
>From ill formatted kerneldoc, to incomplete *and* incorrect struct headers, through to formatting issues and missing attribute descriptions. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/sirf/pinctrl-atlas7.c:197: warning: Function parameter or member 'id' not described in 'atlas7_pad_config' drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'func' not described in 'atlas7_pad_status' drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'pull' not described in 'atlas7_pad_status' drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'dstr' not described in 'atlas7_pad_status' drivers/pinctrl/sirf/pinctrl-atlas7.c:221: warning: Function parameter or member 'reserved' not described in 'atlas7_pad_status' drivers/pinctrl/sirf/pinctrl-atlas7.c:359: warning: Cannot understand * @dev: a pointer back to containing device on line 359 - I thought it was a doc line drivers/pinctrl/sirf/pinctrl-atlas7.c:4794: warning: Function parameter or member 'pad_type' not described in 'atlas7_pull_info' drivers/pinctrl/sirf/pinctrl-atlas7.c:4917: warning: Function parameter or member 'reserved' not described in 'atlas7_ds_info' drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'a7gc' not described in 'atlas7_gpio_to_bank' drivers/pinctrl/sirf/pinctrl-atlas7.c:5617: warning: Function parameter or member 'gpio' not described in 'atlas7_gpio_to_bank' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20200713144930.1034632-3-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: actions: pinctrl-owl: Supply missing 'struct owl_pinctrl' attribute ↵Lee Jones
descriptions Fixes the following W=1 kernel build warning(s): drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'clk' not described in 'owl_pinctrl' drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq_chip' not described in 'owl_pinctrl' drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'num_irq' not described in 'owl_pinctrl' drivers/pinctrl/actions/pinctrl-owl.c:52: warning: Function parameter or member 'irq' not described in 'owl_pinctrl' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: David Liu <liuwei@actions-semi.com> Link: https://lore.kernel.org/r/20200713144930.1034632-2-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: qcom: ipq4019: add open drain supportJaiganesh Narayanan
[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based WiFi APs. ] Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Link: https://lore.kernel.org/r/20200703080646.23233-1-computersforpeace@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: aspeed: Describe the heartbeat function on ball Y23Andrew Jeffery
The default pinmux configuration for Y23 is to route a heartbeat to drive a LED. Previous revisions of the AST2600 datasheet did not include a description of this function. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030756.2834657-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: aspeed: Improve debug outputAndrew Jeffery
We need to iterate over each pin in a group for a function and disable higher priority mux configurations on the pin before finally muxing the relevant function's signal. With the current debug output it is hard to track what register output is relevant to which operation, so break up the actions in the debug output by providing some more context. Before: [ 5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341 [ 5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 After: [ 5.298053] Muxing pin 37 for GPIO [ 5.298294] Disabling signal NRI4 for NRI4 [ 5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.298983] Disabling signal RGMII4RXD1 for RGMII4 [ 5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.299694] Disabling signal RMII4RXD1 for RMII4 [ 5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.300396] Enabling signal GPIOE5 for GPIOE5 [ 5.300687] Muxed pin 37 as GPIOE5 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 13:09:27 +0000