aboutsummaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2021-10-16pinctrl: amd: disable and mask interrupts on probeSachi King
Some systems such as the Microsoft Surface Laptop 4 leave interrupts enabled and configured for use in sleep states on boot, which cause unexpected behaviour such as spurious wakes and failed resumes in s2idle states. As interrupts should not be enabled until they are claimed and explicitly enabled, disabling any interrupts mistakenly left enabled by firmware should be safe. Signed-off-by: Sachi King <nakato@nakato.io> Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()Fabien Dessenne
When resuming from low power, the driver attempts to restore the configuration of some pins. This is done by a call to: stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin) where 'pin' must be a valid pin value (i.e. matching some 'groups->pin'). Fix the current implementation which uses some wrong 'pin' value. Fixes: e2f3cf18c3e2 ("pinctrl: stm32: add suspend/resume management") Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-14Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"Rafał Miłecki
This reverts commit a49d784d5a8272d0f63c448fe8dc69e589db006e. The updated binding was wrong / invalid and has been reverted. There isn't any upstream kernel DTS using it and Broadcom isn't known to use it neither. There is close to zero chance this will cause regression for anyone. Actually in-kernel bcm5301x.dtsi still uses the old good binding and so it's broken since the driver update. This revert fixes it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20211008205938.29925-3-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-08Merge tag 'asm-generic-fixes-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-09-23pinctrl: qcom: sc7280: Add PM suspend callbacksRajendra Nayak
Use PM suspend callbacks from msm core, without this the hog_sleep pins don't change state in suspend. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632389487-11283-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-18pinctrl/rockchip: add a queue for deferred pin output settings on probeHeiko Stuebner
The separation of pinctrl and gpio drivers created a tiny window where a pinconfig setting might produce a null-pointer dereference. The affected device were rk3288-veyron devices in this case. Pinctrl-hogs are claimed when the pinctrl driver is registered, at which point their pinconfig settings will be applied. At this time the now separate gpio devices will not have been created yet and the matching driver won't have probed yet, making the gpio->foo() call run into a null-ptr. As probing is not really guaranteed to have been completed at a specific time, introduce a queue that can hold the output settings until the gpio driver has probed and will (in a separate patch) fetch the elements of the list. We expect the gpio driver to empty the list, but will nevertheless empty it ourself on remove if that didn't happen. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210913224926.1260726-4-heiko@sntech.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: qcom: spmi-gpio: correct parent irqspec translationDavid Collins
pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: amd: Handle wake-up interruptBasavaraj Natikar
Enable/disable power management wakeup mode, which is disabled by default. enable_irq_wake enables wakes the system from sleep. Hence added enable/disable irq_wake to handle wake-up interrupt. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210831120613.1514899-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: amd: Add irq field dataBasavaraj Natikar
pinctrl_amd use gpiochip_get_data() to get their local state containers back from the gpiochip passed as amd_gpio chip data. Hence added irq field data to get directly using amd_gpio chip data. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210831120613.1514899-2-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()Michal Simek
Remove duplicated "which" from devm_pinctrl_unregister() kernel doc description. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8b75e5dfd9363f35ebdd7812e119757379678f97.1629877281.git.michal.simek@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-02Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-08-30Merge tag 'irq-core-2021-08-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ...
2021-08-19isystem: trim/fixup stdarg.h and other headersAlexey Dobriyan
Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition of uintptr_t error (one definition comes from <stddef.h>, another from <linux/types.h>). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-18Merge remote-tracking branch 'linusw/ib-rockchip' into ↵Marc Zyngier
irq/generic_handle_domain_irq Merge Linus' ib-rockchip branch to avoid ugly conflicts with the generic_handle_domain_irq rework. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-08-17Merge tag 'samsung-pinctrl-5.15' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v5.15 1. Fix number of pins in one GPIO pin bank. 2. Add support for Exynos850 SoC (Exynos3830).
2021-08-17Merge branch 'ib-rockchip' into develLinus Walleij
2021-08-17pinctrl/rockchip: drop the gpio related codesJianqun Xu
With the patch to separate the gpio driver from the pinctrl driver, now the pinctrl-rockchip can drop the gpio related codes now. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816012146.1119289-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17gpio/rockchip: support next version gpio controllerJianqun Xu
The next version gpio controller on SoCs like rk3568 have more write mask bits for registers. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816012123.1119179-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17gpio/rockchip: use struct rockchip_gpio_regs for gpio controllerJianqun Xu
Store register offsets in the struct rockchip_gpio_regs, this patch prepare for the driver update for new gpio controller. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816012111.1119125-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17pinctrl/rockchip: add pinctrl device to gpio bank structJianqun Xu
Store a pointer from the pinctrl device for the gpio bank. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816011948.1118959-4-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17pinctrl/rockchip: separate struct rockchip_pin_bank to a head fileJianqun Xu
Separate struct rockchip_pin_bank to pinctrl-rockchip.h file, which will be used by gpio-rockchip driver in the future. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816011948.1118959-3-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-17pinctrl/rockchip: always enable clock for gpio controllerJianqun Xu
Since gate and ungate pclk of gpio has very litte benifit for system power consumption, just keep it always ungate. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210816011948.1118959-2-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-14Merge tag 'renesas-pinctrl-for-v5.15-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.15 (take two) - Add pin control and GPIO support for the new RZ/G2L SoC.
2021-08-13pinctrl: renesas: Add RZ/G2L pin and gpio controller driverLad Prabhakar
Add support for pin and gpio controller driver for RZ/G2L SoC. Based on a patch in the BSP by Hien Huynh <hien.huynh.px@renesas.com>. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210727112328.18809-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-13pinctrl: samsung: Add Exynos850 SoC specific dataSam Protsenko
Add Samsung Exynos850 SoC specific data to enable pinctrl support for all platforms based on Exynos850. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-3-semen.protsenko@linaro.org [krzysztof: lower-case the hex-numbers] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-08-12pinctrl: Bulk conversion to generic_handle_domain_irq()Marc Zyngier
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-08-12pinctrl: amd: Fix an issue with shutdown when system set to s0ixMario Limonciello
IRQs are getting armed on shutdown causing the system to immediately wake back up. Link: https://lkml.org/lkml/2021/8/2/1114 Reported-by: nix.or.die@googlemail.com Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> CC: Raul E Rangel <rrangel@chromium.org> Fixes: d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20210809201513.12367-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: Add Intel Keem Bay pinctrl driverLakshmi Sowjanya D
About Intel Keem Bay: ------------------- Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU. Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst. Pinctrl IP: ---------- The SoC has a customised pinmux controller IP which controls pin multiplexing and configuration. Keem Bay pinctrl IP is not based on and have nothing in common with the existing pinctrl drivers. The registers used are incompatible with the existing drivers, so it requires a new driver. Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC. Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11Merge tag 'intel-pinctrl-v5.14-2' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.14-2 * Fix the software mapping of GPIOs on Intel Tiger Lake-H The following is an automated git shortlog grouped by driver: tigerlake: - Fix GPIO mapping for newer version of software
2021-08-11pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered deviceYang Yingliang
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. Fixes: fa99e7013827 ("pinctrl: zynqmp: some code cleanups") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210729071905.3235953-1-yangyingliang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: k210: Fix k210_fpioa_probe()Damien Le Moal
In k210_fpioa_probe(), add missing calls to clk_disable_unprepare() in case of error after cenabling the clk and pclk clocks. Also add missing error handling when enabling pclk. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210806004311.52859-1-damien.lemoal@wdc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: ingenic: Add .max_register in regmap_configPaul Cercueil
Compute the max register from the GPIO chip offset and number of GPIO chips. This permits to read all registers from debugfs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20210717174836.14776-3-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: ingenic: Fix bias config for X2000(E)Paul Cercueil
The ingenic_set_bias() function's "bias" argument is not a "enum pin_config_param", so its value should not be compared against values of that enum. This should fix the bias config not working on the X2000(E) SoCs. Fixes: 943e0da15370 ("pinctrl: Ingenic: Add pinctrl driver for X2000.") Cc: <stable@vger.kernel.org> # v5.12 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20210717174836.14776-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: ingenic: Fix incorrect pull up/down infoPaul Cercueil
Fix the pull up/down info for both the JZ4760 and JZ4770 SoCs, as the previous values sometimes contradicted what's written in the programming manual. Fixes: b5c23aa46537 ("pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs") Cc: <stable@vger.kernel.org> # v4.12 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20210717174836.14776-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: Ingenic: Add pinctrl driver for X2100.周琰杰 (Zhou Yanjie)
Add support for probing the pinctrl-ingenic driver on the X2100 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1627108604-91304-5-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.周琰杰 (Zhou Yanjie)
Add SSI pins support for the JZ4755 SoC and the JZ4760 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1627108604-91304-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: Ingenic: Improve the code.周琰杰 (Zhou Yanjie)
1.Rename the original "dmicx" ABIs to "dmic-ifx", since these devices have only one DMIC module which has multiple input interfaces. The original naming is easy to make users mistakenly think that the device has multiple dmic modules. Currently, in the mainline, no other devicetree out there is using the "sfc" ABI, so we should be able to replace it safely. 2.Rename the original "ssix-ce0" ABIs to "ssix-ce", since the X2000 have only one ce pin. The original naming is easy to make users mistakenly think that the device has multiple ce pins. Currently, in the mainline, no other devicetree out there is using the "ssix-ce0" ABIs, so we should be able to replace it safely. 3.Split the original "sfc" ABI into "sfc-data", "sfc-ce", "sfc-clk" to increase the flexibility when configuring the pins. Currently, in the mainline, no other devicetree out there is using the "sfc" ABI, so we should be able to replace it safely. 4.There is more than one compatible string in the match table, so renaming "ingenic_xxxx_of_match[]" to "ingenic_xxxx_of_matches" is more reasonable, and remove the unnecessary commas in "ingenic_gpio_of_matches[]" to reduce code size as much as possible. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1627108604-91304-2-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: aspeed: placate kernel-doc warningsRandy Dunlap
Eliminate kernel-doc warnings in drivers/pinctrl/aspeed by using proper kernel-doc notation. Fixes these kernel-doc warnings: drivers/pinctrl/aspeed/pinmux-aspeed.c:61: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Query the enabled or disabled state for a mux function's signal on a pin drivers/pinctrl/aspeed/pinctrl-aspeed.c:135: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Search for the signal expression needed to enable the pin's signal for the Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: openbmc@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210723034840.8752-1-rdunlap@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: sunxi: Don't underestimate number of functionsAndre Przywara
When we are building all the various pinctrl structures for the Allwinner pinctrl devices, we do some estimation about the maximum number of distinct function (names) that we will need. So far we take the number of pins as an upper bound, even though we can actually have up to four special functions per pin. This wasn't a problem until now, since we indeed have typically far more pins than functions, and most pins share common functions. However the H616 "-r" pin controller has only two pins, but four functions, so we run over the end of the array when we are looking for a matching function name in sunxi_pinctrl_add_function - there is no NULL sentinel left that would terminate the loop: [ 8.200648] Unable to handle kernel paging request at virtual address fffdff7efbefaff5 [ 8.209179] Mem abort info: .... [ 8.368456] Call trace: [ 8.370925] __pi_strcmp+0x90/0xf0 [ 8.374559] sun50i_h616_r_pinctrl_probe+0x1c/0x28 [ 8.379557] platform_probe+0x68/0xd8 Do an actual worst case allocation (4 functions per pin, three common functions and the sentinel) for the initial array allocation. This is now heavily overestimating the number of functions in the common case, but we will reallocate this array later with the actual number of functions, so it's only temporarily. Fixes: 561c1cf17c46 ("pinctrl: sunxi: Add support for the Allwinner H616-R pin controller") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722132548.22121-1-andre.przywara@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: stmfx: Fix hazardous u8[] to unsigned long castMarc Zyngier
Casting a small array of u8 to an unsigned long is *never* OK: - it does funny thing when the array size is less than that of a long, as it accesses random places in the stack - it makes everything even more fun with a BE kernel Fix this by building the unsigned long used as a bitmap byte by byte, in a way that works across endianess and has no undefined behaviours. An extra BUILD_BUG_ON() catches the unlikely case where the array would be larger than a single unsigned long. Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210725180830.250218-1-maz@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: stm32: Add STM32MP135 SoC supportAlexandre Torgue
STM32MP135 SoC embeds 9 GPIO banks of 16 gpios each. Those GPIO banks contain same features as STM32MP157 GPIO banks except that each GPIO line of the STM32MP135 can be secured. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de Link: https://lore.kernel.org/r/20210723132810.25728-3-alexandre.torgue@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: single: Move test PCS_HAS_PINCONF in ↵Zhen Lei
pcs_parse_bits_in_pinctrl_entry() to the beginning The value of pcs->flags is not overwritten in function pcs_parse_bits_in_pinctrl_entry() and its subfunctions, so moving this check to the beginning of the function eliminates unnecessary rollback operations. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210722033930.4034-3-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()Zhen Lei
Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which is the same as that returned in pcs_parse_pinconf(). Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180cBjorn Andersson
The SC8180x platform comes with PMC8180 and PMC8180c, add support for the GPIO controller in these PMICs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04pinctrl: tigerlake: Fix GPIO mapping for newer version of softwareAndy Shevchenko
The software mapping for GPIO, which initially comes from Microsoft, is subject to change by respective Windows and firmware developers. Due to the above the driver had been written and published way ahead of the schedule, and thus the numbering schema used in it is outdated. Fix the numbering schema in accordance with the real products on market. Fixes: 653d96455e1e ("pinctrl: tigerlake: Add support for Tiger Lake-H") Reported-and-tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Riccardo Mori <patacca@autistici.org> Reported-and-tested-by: Lovesh <lovesh.bond@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213463 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213579 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213857 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-08-02pinctrl: samsung: Fix pinctrl bank pin countJaehyoung Choi
Commit 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO") changes the order of GPIO and pinctrl registration: now pinctrl is registered before GPIO. That means gpio_chip->ngpio is not set when samsung_pinctrl_register() called, and one cannot rely on that value anymore. Use `pin_bank->nr_pins' instead of `pin_bank->gpio_chip.ngpio' to fix mentioned inconsistency. Fixes: 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO") Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210730192905.7173-1-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-07-31drivers: qcom: pinctrl: Add pinctrl driver for sm6115Iskren Chernev
Based on CAF implementation with egpio/wake_reg support removed. Similar function names were merged to reduce total number of functions. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210723192352.546902-3-iskren.chernev@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-30Merge tag 'renesas-pinctrl-for-v5.15-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.15 - Add bias support for the R-Car D3 SoC, - Miscellaneous fixes and improvements.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 17:05:08 +0000