aboutsummaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)Author
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21Merge tag 'for-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Improve support for TI bq20z75 in sbs-battery - Add Qualcomm PM8xxx reboot driver - Add cros-ec USBPD charger driver - Move ds2760 battery driver from w1 to power-supply and add DT support - Misc fixes * tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: bq27xxx: Update comments power: supply: max77693_charger: fix unintentional fall-through power: supply: mark expected switch fall-throughs power: supply: lego_ev3_battery: fix Vce offset power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value power: supply: ds2760_battery: add devicetree probing power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion w1: core: match sub-nodes of bus masters in devicetree dt-bindings: w1: document bindings for ds2760 battery monitor dt-bindings: w1: document generic onewire bindings power: supply: adp5061: Fix a couple off by ones dt-bindings: power: reset: qcom: Add resin binding adp5061: New driver for ADP5061 I2C battery charger power: generic-adc-battery: check for duplicate properties copied from iio channels power: generic-adc-battery: fix out-of-bounds write when copying channel properties power: supply: axp288_charger: Fix initial constant_charge_current value power: supply: ab8500: stop using getnstimeofday64() power: gemini-poweroff: Avoid more spurious poweroffs power: vexpress: fix corruption in notifier registration power: remove possible deadlock when unregistering power_supply ...
2018-08-16Merge branch 'psy-fixes' into psy-nextSebastian Reichel
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2018-07-24power: supply: bq27xxx: Update commentsLiu Xiang
The URL of bq27441-g1 and bq27426 are missing and bq27520-g4 is duplicated. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-23power: supply: max77693_charger: fix unintentional fall-throughGustavo A. R. Silva
It seems that a *break* is missing in order to avoid a fall-through. Otherwise, the calculation of *data* makes no sense. Addresses-Coverity-ID: 1271172 ("Missing break in switch") Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-23power: supply: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1394724 ("Missing break in switch") Addresses-Coverity-ID: 114958 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22power: supply: lego_ev3_battery: fix Vce offsetDavid Lechner
This fixes the value that accounts for the Vce of a transistor in the LEGO MINDSTORMS EV3 power supply driver. The old value (200mV) was the max value from the data sheet. After testing, the actual value has been found to be 50mV. By using 50mV we get a more accurate voltage indication. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() ↵David Lechner
return value This changes the LEGO MINDSTORMS EV3 power supply driver to return an error if iio_read_channel_processed() fails. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-22Merge tag 'ds2760-for-v4.19-signed' into psy-nextSebastian Reichel
Immutable branch for moving ds2760 driver from w1 to power supply Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: ds2760_battery: add devicetree probingDaniel Mack
Add a matching table for devicetree probing, and optionally set the module parameter variables from DT properties. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave ↵Daniel Mack
companion This patch removes the w1 slave driver that used to register the w1 family and instanciate a platform device at runtime. The code now lives in the supply driver instead to avoid that level of indirection. The old device name "ds2760-battery.0" is preserved, so userspace applications can access the same virtual device nodes as before. Note that because the w1 core does not currently have a framework for suspend/resume, the driver now registers a PM notifier callback. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-11power: supply: adp5061: Fix a couple off by onesDan Carpenter
We end up reading one element beyond the end of the adp5061_vmax[] array here. Fixes: fe8e81b7e899 ("adp5061: New driver for ADP5061 I2C battery charger") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06adp5061: New driver for ADP5061 I2C battery chargerStefan Popa
This patch adds basic support for Analog Devices I2C programmable linear battery charger. With this driver, some parameters can be read and configured such as: * trickle charge current level (PRECHARGE_CURRENT) * trickle charge voltage threshold (VOLTAGE_MIN) * weak charge threshold (VOLTAGE_AVG) * constant current (CONSTANT_CHARGE_CURRENT) * constant charge voltage limit (CONSTANT_CHARGE_VOLTAGE_MAX) * battery full (CAPACITY_LEVEL) * input current limit (INPUT_CURRENT_LIMIT) * charger status (STATUS) * battery status (CAPACITY_LEVEL) * termination current (CHARGE_TERM_CURRENT) Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADP5061.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: generic-adc-battery: check for duplicate properties copied from iio ↵H. Nikolaus Schaller
channels If an iio channel defines a basic property, there are duplicate entries in /sys/class/power/*/uevent. So add a check to avoid duplicates. Since all channels may be duplicates, we have to modify the related error check. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: generic-adc-battery: fix out-of-bounds write when copying channel ↵H. Nikolaus Schaller
properties We did have sporadic problems in the pinctrl framework during boot where a pin group name unexpectedly became NULL leading to a NULL dereference in strcmp. Detailled analysis of the failing cases did reveal that there were two devm allocated objects close to each other. The second one was the affected group_desc in pinmux and the first one was the psy_desc->properties buffer of the gab driver. Review of the gab code showed that the address calculation for one memcpy() is wrong. It does properties + sizeof(type) * index but C is defined to do the index multiplication already for pointer + integer additions. Hence the factor was applied twice and the memcpy() does write outside of the properties buffer. Sometimes it happened to be the pinctrl and triggered the strcmp(NULL). Anyways, it is overkill to use a memcpy() here instead of a simple assignment, which is easier to read and has less risk for wrong address calculations. So we change code to a simple assignment. If we initialize the index to the first free location, we can even remove the local variable 'properties'. This bug seems to exist right from the beginning in 3.7-rc1 in commit e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: supply: axp288_charger: Fix initial constant_charge_current valueHans de Goede
We should look at val which contains the value read from the register, not ret which is always 0 on a successful read. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Fixes: eac53b3664f59 ("power: supply: axp288_charger: Drop platform_data dependency") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: supply: ab8500: stop using getnstimeofday64()Arnd Bergmann
getnstimeofday64() is deprecated in favor of the ktime_get() family. The direct replacement would be ktime_get_real_ts64(), but we only need the seconds value, and it seems better to use boottime than real time to avoid unexpected behavior with a concurrent settimeofday(). ktime_get_seconds() might also work, but it seems better to use boottime than monotonic time since I assume that the charging process continues during suspend. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: gemini-poweroff: Avoid more spurious poweroffsLinus Walleij
Even after the previous fix I have experienced more spurious poweroffs on the gemini SoC. After this fix it finally seems to go away. Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: vexpress: fix corruption in notifier registrationSudeep Holla
Vexpress platforms provide two different restart handlers: SYS_REBOOT that restart the entire system, while DB_RESET only restarts the daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT if it exists. notifier_chain_register used in register_restart_handler by design relies on notifiers to be registered once only, however vexpress restart notifier can get registered twice. When this happen it corrupts list of notifiers, as result some notifiers can be not called on proper event, traverse on list can be cycled forever, and second unregister can access already freed memory. So far, since this was the only restart handler in the system, no issue was observed even if the same notifier was registered twice. However commit 6c5c0d48b686 ("watchdog: sp805: add restart handler") added support for SP805 restart handlers and since the system under test contains two vexpress restart and two SP805 watchdog instances, it was observed that during the boot traversing the restart handler list looped forever as there's a cycle in that list resulting in boot hang. This patch fixes the issues by ensuring that the notifier is installed only once. Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Fixes: 46c99ac66222 ("power/reset: vexpress: Register with kernel restart handler") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: remove possible deadlock when unregistering power_supplyBenjamin Tissoires
If a device gets removed right after having registered a power_supply node, we might enter in a deadlock between the remove call (that has a lock on the parent device) and the deferred register work. Allow the deferred register work to exit without taking the lock when we are in the remove state. Stack trace on a Ubuntu 16.04: [16072.109121] INFO: task kworker/u16:2:1180 blocked for more than 120 seconds. [16072.109127] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109129] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109132] kworker/u16:2 D 0 1180 2 0x80000000 [16072.109142] Workqueue: events_power_efficient power_supply_deferred_register_work [16072.109144] Call Trace: [16072.109152] __schedule+0x3d6/0x8b0 [16072.109155] schedule+0x36/0x80 [16072.109158] schedule_preempt_disabled+0xe/0x10 [16072.109161] __mutex_lock.isra.2+0x2ab/0x4e0 [16072.109166] __mutex_lock_slowpath+0x13/0x20 [16072.109168] ? __mutex_lock_slowpath+0x13/0x20 [16072.109171] mutex_lock+0x2f/0x40 [16072.109174] power_supply_deferred_register_work+0x2b/0x50 [16072.109179] process_one_work+0x15b/0x410 [16072.109182] worker_thread+0x4b/0x460 [16072.109186] kthread+0x10c/0x140 [16072.109189] ? process_one_work+0x410/0x410 [16072.109191] ? kthread_create_on_node+0x70/0x70 [16072.109194] ret_from_fork+0x35/0x40 [16072.109199] INFO: task test:2257 blocked for more than 120 seconds. [16072.109202] Not tainted 4.13.0-41-generic #46~16.04.1-Ubuntu [16072.109204] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [16072.109206] test D 0 2257 2256 0x00000004 [16072.109208] Call Trace: [16072.109211] __schedule+0x3d6/0x8b0 [16072.109215] schedule+0x36/0x80 [16072.109218] schedule_timeout+0x1f3/0x360 [16072.109221] ? check_preempt_curr+0x5a/0xa0 [16072.109224] ? ttwu_do_wakeup+0x1e/0x150 [16072.109227] wait_for_completion+0xb4/0x140 [16072.109230] ? wait_for_completion+0xb4/0x140 [16072.109233] ? wake_up_q+0x70/0x70 [16072.109236] flush_work+0x129/0x1e0 [16072.109240] ? worker_detach_from_pool+0xb0/0xb0 [16072.109243] __cancel_work_timer+0x10f/0x190 [16072.109247] ? device_del+0x264/0x310 [16072.109250] ? __wake_up+0x44/0x50 [16072.109253] cancel_delayed_work_sync+0x13/0x20 [16072.109257] power_supply_unregister+0x37/0xb0 [16072.109260] devm_power_supply_release+0x11/0x20 [16072.109263] release_nodes+0x110/0x200 [16072.109266] devres_release_group+0x7c/0xb0 [16072.109274] wacom_remove+0xc2/0x110 [wacom] [16072.109279] hid_device_remove+0x6e/0xd0 [hid] [16072.109284] device_release_driver_internal+0x158/0x210 [16072.109288] device_release_driver+0x12/0x20 [16072.109291] bus_remove_device+0xec/0x160 [16072.109293] device_del+0x1de/0x310 [16072.109298] hid_destroy_device+0x27/0x60 [hid] [16072.109303] usbhid_disconnect+0x51/0x70 [usbhid] [16072.109308] usb_unbind_interface+0x77/0x270 [16072.109311] device_release_driver_internal+0x158/0x210 [16072.109315] device_release_driver+0x12/0x20 [16072.109318] usb_driver_release_interface+0x77/0x80 [16072.109321] proc_ioctl+0x20f/0x250 [16072.109325] usbdev_do_ioctl+0x57f/0x1140 [16072.109327] ? __wake_up+0x44/0x50 [16072.109331] usbdev_ioctl+0xe/0x20 [16072.109336] do_vfs_ioctl+0xa4/0x600 [16072.109339] ? vfs_write+0x15a/0x1b0 [16072.109343] SyS_ioctl+0x79/0x90 [16072.109347] entry_SYSCALL_64_fastpath+0x24/0xab [16072.109349] RIP: 0033:0x7f20da807f47 [16072.109351] RSP: 002b:00007ffc422ae398 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [16072.109353] RAX: ffffffffffffffda RBX: 00000000010b8560 RCX: 00007f20da807f47 [16072.109355] RDX: 00007ffc422ae3a0 RSI: 00000000c0105512 RDI: 0000000000000009 [16072.109356] RBP: 0000000000000000 R08: 00007ffc422ae3e0 R09: 0000000000000010 [16072.109357] R10: 00000000000000a6 R11: 0000000000000246 R12: 0000000000000000 [16072.109359] R13: 00000000010b8560 R14: 00007ffc422ae2e0 R15: 0000000000000000 Reported-and-tested-by: Richard Hughes <rhughes@redhat.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Fixes: 7f1a57fdd6cb ("power_supply: Fix possible NULL pointer dereference on early uevent") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-06power: reset: qcom-pon: Add Qcom PON driverVinod Koul
Add support Qualcomm PM8xxx PON which is responsible for reboot mode support. Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-07-05power: supply: add cros-ec USBPD charger driver.Sameer Nanda
This driver gets various bits of information about what is connected to USB PD ports from the EC and converts that into power_supply properties. Signed-off-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-06-28power: supply: max1721x: fix spelling mistake "RSenese" -> "RSense"Colin Ian King
Trivial fix to spelling mistake in dev_warn message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-06-28power: reset: zx-reboot: put device node in zx_reboot_probe()Alexey Khoroshilov
zx_reboot_probe() increments refcnt of zx296702-pcu device node by of_find_compatible_node() and leaves it undecremented on both successful and error paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-06-28power: supply: tps65217: Switch to SPDX identifier.Enric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-06-28power: supply: sbs-battery: don't assume MANUFACTURER_DATA formatsBrian Norris
This driver was originally submitted for the TI BQ20Z75 battery IC (commit a7640bfa10c5 ("power_supply: Add driver for TI BQ20Z75 gas gauge IC")) and later renamed to express generic SBS support. While it's mostly true that this driver implemented a standard SBS command set, it takes liberties with the REG_MANUFACTURER_DATA register. This register is specified in the SBS spec, but it doesn't make any mention of what its actual contents are. We've sort of noticed this optionality previously, with commit 17c6d3979e5b ("sbs-battery: make writes to ManufacturerAccess optional"), where we found that some batteries NAK writes to this register. What this really means is that so far, we've just been lucky that most batteries have either been compatible with the TI chip, or else at least haven't reported highly-unexpected values. For instance, one battery I have here seems to report either 0x0000 or 0x0100 to the MANUFACTURER_ACCESS_STATUS command -- while this seems to match either Wake Up (bits[11:8] = 0000b) or Normal Discharge (bits[11:8] = 0001b) status for the TI part [1], they don't seem to actually correspond to real states (for instance, I never see 0101b = Charge, even when charging). On other batteries, I'm getting apparently random data in return, which means that occasionally, we interpret this as "battery not present" or "battery is not healthy". All in all, it seems to be a really bad idea to make assumptions about REG_MANUFACTURER_DATA, unless we already know what battery we're using. Therefore, this patch reimplements the "present" and "health" checks to the following on most SBS batteries: 1. HEALTH: report "unknown" -- I couldn't find a standard SBS command that gives us much useful here 2. PRESENT: just send a REG_STATUS command; if it succeeds, then the battery is present Also, we stop sending MANUFACTURER_ACCESS_SLEEP to non-TI parts. I have no proof that this is useful and supported. If someone explicitly provided a 'ti,bq20z75' compatible property, then we continue to use the existing TI command behaviors, and we effectively revert commit 17c6d3979e5b ("sbs-battery: make writes to ManufacturerAccess optional") to again make these commands required. [1] http://www.ti.com/lit/er/sluu265a/sluu265a.pdf Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge tag 'for-v4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: Add BQ27426 support - ab8500: Drop AB8540/9540 support - Introduced new usb_type property - Properly document the power-supply ABI - misc. cleanups and fixes * tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: MAINTAINERS: add entry for LEGO MINDSTORMS EV3 power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed" power: supply: axp288_fuel_gauge: Remove polling from the driver power: supply: axp288_fuelguage: Do not bind when the fg function is not used power: supply: axp288_charger: Do not bind when the charge function is not used power: supply: axp288_charger: Support 3500 and 4000 mA input current limit power: supply: s3c-adc-battery: fix driver data initialization power: supply: charger-manager: Verify polling interval only when polling requested power: supply: sysfs: Use enum to specify property power: supply: ab8500: Drop AB8540/9540 support power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge" power: supply: simplify getting .drvdata power: supply: bq27xxx: Add support for BQ27426 gpio-poweroff: Use gpiod_set_value_cansleep
2018-06-05Merge tag 'usb-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and PHY updates from Greg KH: "Here is the big USB pull request for 4.18-rc1. Lots of stuff here, the highlights are: - phy driver updates and new additions - usual set of xhci driver updates - normal set of musb updates - gadget driver updates and new controllers - typec work, it's getting closer to getting fully out of the staging portion of the tree. - lots of minor cleanups and bugfixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue" xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers xhci: Allow more than 32 quirks usb: xhci: force all memory allocations to node selftests: add test for USB over IP driver USB: typec: fsusb302: no need to check return value of debugfs_create_dir() USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions USB: dwc3: no need to check return value of debugfs_create functions USB: dwc2: no need to check return value of debugfs_create functions USB: core: no need to check return value of debugfs_create functions USB: chipidea: no need to check return value of debugfs_create functions USB: ehci-hcd: no need to check return value of debugfs_create functions USB: fhci-hcd: no need to check return value of debugfs_create functions USB: fotg210-hcd: no need to check return value of debugfs_create functions USB: imx21-hcd: no need to check return value of debugfs_create functions ...
2018-05-24power: supply: Add fwnode pointer to power_supply_config structAdam Thomson
To allow users of the power supply framework to be hw description agnostic, this commit adds the ability to pass a fwnode pointer, via the power_supply_config structure, to the initialisation code of the core, instead of explicitly specifying of_ndoe. If that fwnode pointer is provided then it will automatically resolve down to of_node on platforms which support it, otherwise it will be NULL. In the future, when ACPI support is added, this can be modified to accommodate ACPI without the need to change calling code which already provides the fwnode handle in this manner. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-17PM / AVS: rockchip-io: add io selectors and supplies for PX30David Wu
This adds the necessary data for handling io voltage domains on PX30. As interesting tidbit, the PX30 contains two separate iodomain areas. One in the regular General Register Files (GRF) and one in PMUGRF in the pmu power domain. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-01power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed"Colin Ian King
trivial fix to spelling mistake in dev_error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26Merge tag 'tags/tcpm-pps-4.18' into psy-nextSebastian Reichel
Tag/Merge point for adding typeC power supply support This is a signed tag/merge point to handle the cross-tree merge of the USB and power supply subsystems for the patch series: Subject: [PATCH v8 0/6] typec: tcpm: Add sink side support for PPS It is based on the usb.git tree, in the usb-next branch, for merging in 4.18-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: axp288_fuel_gauge: Remove polling from the driverHans de Goede
Userspace class/power_supply consumers such as upower, already know some supplies need to be polled to get up2date info. Doing this in the kernel and then waking up userspace just causes unnecessary wakeups and i2c transfers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: axp288_fuelguage: Do not bind when the fg function is not usedHans de Goede
Some devices with an AXP288 PMIC do not have a battery at all, or use external charger and fuelgauge ICs instead of the AXP288 builtin functionality. On such devices we should not bind to the fuelgauge function to avoid exporting a non working power_supply class device. This also avoids the following errors repeating over and over again in dmesg: axp288_fuel_gauge axp288_fuel_gauge: capacity measurement not valid axp288_fuel_gauge axp288_fuel_gauge: Error 0xe2 contents not valid power_supply axp288_fuel_gauge: driver failed to report 'charge_now' property: -6 Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: axp288_charger: Do not bind when the charge function is not usedHans de Goede
Some devices with an AXP288 PMIC do not have a battery at all, or use external charger and fuelgauge ICs instead of the AXP288 builtin functionality. On such devices we should not bind to the charge function to avoid exporting a non working power_supply class device. Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: axp288_charger: Support 3500 and 4000 mA input current limitHans de Goede
The AXP288 supports an input-current-limit of up to 4000 mA, this commit adds support for the 3500 and 4000 mA settings which were missing until now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: s3c-adc-battery: fix driver data initializationSergiy Kibrik
For power_supply_get_drvdata() routine to work correctly the driver data has to be provided when registering power supply, otherwise driver gives up immediately with these errors: power_supply main-battery: no battery infos ?! power_supply main-battery: driver failed to report `status' property: -22 Signed-off-by: Sergiy Kibrik <sakib@darkstar.site> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-26power: supply: charger-manager: Verify polling interval only when polling ↵Ladislav Michl
requested Driver bails out with -EINVAL when no polling specififaion is requested. Fix that by verifing polling interval only if polling_mode is different from CM_POLL_DISABLE. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: sysfs: Use enum to specify propertyLadislav Michl
Power supply property is in fact enum, so reflect it in code. Also use switch statement in show property function as is done for storing property. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: ab8500: Drop AB8540/9540 supportLinus Walleij
The AB8540 was an evolved version of the AB8500, but it was never mass produced or put into products, only reference designs exist. The upstream support was never completed and it is unlikely that this will happen so drop the support for now to simplify maintenance of the AB8500. Cc: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge"Colin Ian King
Trivial fix to spelling mistake in dev_dbg message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: bq27xxx: Add support for BQ27426Andrew F. Davis
This device is software similar to the BQ27426 except it has different data memory offsets. Add support here. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25gpio-poweroff: Use gpiod_set_value_cansleepMike Looijmans
The power-off call is done in a context that must be able to sleep, so use gpiod_set_value_cansleep instead of the atomic gpiod_set_value call. This fixes a kernel warning at shutdown when the gpio is controlled through an IO expander for example. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-25power: supply: Add 'usb_type' property and supporting codeAdam Thomson
This commit adds the 'usb_type' property to represent USB supplies which can report a number of different types based on a connection event. Examples of this already exist in drivers whereby the existing 'type' property is updated, based on an event, to represent what was connected (e.g. USB, USB_DCP, USB_ACA, ...). Current implementations however don't show all supported connectable types, so this knowledge has to be exlicitly known for each driver that supports this. The 'usb_type' property is intended to fill this void and show users all possible USB types supported by a driver. The property, when read, shows all available types for the driver, and the one currently chosen is highlighted/bracketed. It is expected that the 'type' property would then just show the top-level type 'USB', and this would be static. Currently the 'usb_type' enum contains all of the USB variant types that exist for the 'type' enum at this time, and in addition has SDP and PPS types. The mirroring is intentional so as to not impact existing usage of the 'type' property. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25power: supply: Add error checking of psy desc during registrationAdam Thomson
Currently there's no error checking of this parameter in the registration function and it's blindly added to psy class and subsequently used as is. For example if this is NULL the call to psy_register_thermal() will try to dereference the pointer thus causing a kernel dump. This commit updates the registration code to add some basic checks on the desc pointer validity, name, and presence of properties. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-05Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 01:45:42 +0000