aboutsummaryrefslogtreecommitdiff
path: root/drivers/powercap
AgeCommit message (Collapse)Author
2019-02-18powercap/intel_rapl: add Ice Lake mobileGayatri Kammela
Add Ice Lake mobile support to intel_rapl driver. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-12powercap: intel_rapl: add support for JacobsvilleZhang Rui
Jacobsville RAPL interface is compatible with Core-based CPUs. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-10powercap: RAPL: Get rid of custom RAPL_CPU() macroAndy Shevchenko
Replace custom grown macro with generic INTEL_CPU_FAM6() one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-02powercap / idle_inject: Add an idle injection frameworkDaniel Lezcano
Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-19powercap: RAPL: Add support for Cannon LakeJoe Konno
RAPL MSRs and handling for Cannon Lake are similar to Sky Lake and Kaby Lake. Signed-off-by: Joe Konno <joe.konno@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17powercap: intel_rapl: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-10powercap: add suspend and resume mechanism for SOC power limitZhen Han
PL1 and PL2 could be throlled or de-throttled by Thermal management to control SOC temperature. However, currently, their value will be reset to default value after once system suspend and resume. Add pm_notifier to save PL1, PL2 before system suspect and restore PL1, PL2 after system resume. Signed-off-by: Zhen Han <zhen.han@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-07powercap: Simplify powercap_init()Arvind Yadav
Simplify powercap_init() by reducing the number of redundant assignments in it. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [ rjw: Subject+changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-28powercap/RAPL: prevent overridding bits outside of the maskAdam Lessnau
Fixes wrong bits shift operation in the rapl_write_data_raw function, which might cause overridding bits outside of the mask. For example, writing new TIME_WINDOW1 value can override POWER_LIMIT1. Signed-off-by: Adam Lessnau <adam.lessnau@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-14PowerCap: Fix an error code in powercap_register_zone()Dan Carpenter
In the current code we accidentally return the successful result from idr_alloc() instead of a negative error pointer. The caller is looking for an error pointer and so it treats the returned value as a valid pointer. This one might be a bit serious because if it lets people get around the kernel's protection for remapping NULL. I'm not sure. Fixes: 75d2364ea0ca (PowerCap: Add class driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-28powercap: intel_rapl: Add support for Gemini LakeDavid E. Box
Gemini Lake RAPL support is similar to Goldmont. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Acked-by: Pan, Jacob jun <jacob.jun.pan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30powercap / RAPL: Add Knights Mill CPUIDPiotr Luc
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_rapl Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-29powercap/intel_rapl: fix and tidy up error handlingJacob Pan
Commit e1399ba20eee ("powercap / RAPL: handle missing MSRs") added contraint_to_pl() function to return index into an array. But it can potentially return -EINVAL if powercap layer sends an out of range constraint ID. This patch adds sanity check. Unnecessary RAPL domain pointer check is removed since it must be initialized before calling rapl_unit_xlate(). Fixes: e1399ba20eee ("powercap / RAPL: handle missing MSRs") Reported-by: Odzioba, Lukasz <lukasz.odzioba@intel.com> Reported-by: Koss, Marcin <marcin.koss@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Track active CPUs internallyThomas Gleixner
The ability of the CPU hotplug code to stop online/offline at each step makes it necessary to track the activated CPUs in a package directly, because outerwise a CPU offline callback can find CPUs which have already executed the offline callback, but are not yet marked offline in the topology mask. That could make such a CPU the package leader and in case that CPU goes fully offline leave the package lead orphaned. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Cleanup duplicated init codeThomas Gleixner
The whole init/exit code is a duplicate of the cpuhotplug code. So we can just let the hotplug code do the actual work of setting up and tearing down the domains. This also restores the package hardware when a package is removed during hotplug instead of leaving it in the last configured state and only reset it when the driver is removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel rapl: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine as a first step. The init/exit code is a duplicate of the hotplug code. This is cleaned up in a consecutive patch. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Propagate error code when registration failsThomas Gleixner
If rapl_package_register_powercap() fails in rapl_add_package() the function happily returns 0. Capture the error code and propagate it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-24powercap/intel_rapl: Add missing domain data update on hotplugThomas Gleixner
The domain data of packages is only updated at init time, but new packages created by hotplug miss that treatment. Add it there and remove the global update at init time, because it's now obsolete. The more interesting question is why rapl_update_domain_data() exists at all as nothing ever uses that data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-08x86/cpu: Rename Merrifield2 to MoorefieldAndy Shevchenko
Merrifield2 is actually Moorefield. Rename it accordingly and drop tail digit from Merrifield1. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160906184254.94440-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-25powercap / RAPL: Add support for Ivy Bridge serverXiaolong Wang
It's confirmed that RAPL works as expected on Ivy Bridge servers. Tested against processor: Intel(R) Xeon(R) CPU E5-2697 v2 @2.70GHz Signed-off-by: Xiaolong Wang <xiaolong.wang@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-15powercap / RAPL: add support for DenvertonJacob Pan
Denverton micro server is Atom-based, but its RAPL interface is compatible with Core-based CPUs. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-15Merge back earlier powercap material for v4.8.Rafael J. Wysocki
2016-06-15powercap / RAPL: handle missing MSRsJacob Pan
Some RAPL MSRs may not exist on some CPUs, we need to continue the topology detection and enumerate what is available. This patch handles the missing MSRs, then reports to the powercap layer only the features available. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-10powercap / RAPL: reduce message loglevelJacob Pan
Since the RAPL interface is not architectual, its enumeration depends on poking MSRs instead of using the CPUID method. In KVM guests, the RAPL driver probe will fail and emit the following message for every CPU: "no valid rapl domains found in package" This patch converts the warning to a debug message only (still return -ENODEV so that RAPL does not run in KVM guests). Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-08x86, powercap, rapl: Add Skylake Server model numberDave Hansen
SKX uses similar RAPL interface as Broadwell server according to Jacob Pan. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001955.38E1E684@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86, powercap, rapl: Reorder CPU detection tableDave Hansen
Let's make an effort to group these things by microarchitecture name. It makes it easier to see if something got missed. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001937.B53A383A@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08x86, powercap, rapl: Use Intel model macros intead of open-codingDave Hansen
Use the new macros to remove another large set of open-coded values. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jacob.jun.pan@intel.com Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001936.F474F9D8@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-16Merge tag 'pm-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The majority of changes go into the cpufreq subsystem this time. To me, quite obviously, the biggest ticket item is the new "schedutil" governor. Interestingly enough, it's the first new cpufreq governor since the beginning of the git era (except for some out-of-the-tree ones). There are two main differences between it and the existing governors. First, it uses the information provided by the scheduler directly for making its decisions, so it doesn't have to track anything by itself. Second, it can invoke drivers (supporting that feature) to adjust CPU performance right away without having to spawn work items to be executed in process context or similar. Currently, the acpi-cpufreq driver is the only one supporting that mode of operation, but then it is used on a large number of systems. The "schedutil" governor as included here is very simple and mostly regarded as a foundation for future work on the integration of the scheduler with CPU power management (in fact, there is work in progress on top of it already). Nevertheless it works and the preliminary results obtained with it are encouraging. There also is some consolidation of CPU frequency management for ARM platforms that can add their machine IDs the the new stub dt-platdev driver now and that will take care of creating the requisite platform device for cpufreq-dt, so it is not necessary to do that in platform code any more. Several ARM platforms are switched over to using this generic mechanism. In addition to that, the intel_pstate driver is now going to respect CPU frequency limits set by the platform firmware (or a BMC) and provided via the ACPI _PPC object. The devfreq subsystem is getting a new "passive" governor for SoCs subsystems that will depend on somebody else to manage their voltage rails and its support for Samsung Exynos SoCs is consolidated. The rest is support for new hardware (Intel Broxton support in intel_idle for one example), bug fixes, optimizations and cleanups in a number of places. Specifics: - New cpufreq "schedutil" governor (making decisions based on CPU utilization information provided by the scheduler and capable of switching CPU frequencies right away if the underlying driver supports that) and support for fast frequency switching in the acpi-cpufreq driver (Rafael Wysocki) - Consolidation of CPU frequency management on ARM platforms allowing them to get rid of some platform-specific boilerplate code if they are going to use the cpufreq-dt driver (Viresh Kumar, Finley Xiao, Marc Gonzalez) - Support for ACPI _PPC and CPU frequency limits in the intel_pstate driver (Srinivas Pandruvada) - Fixes and cleanups in the cpufreq core and generic governor code (Rafael Wysocki, Sai Gurrappadi) - intel_pstate driver optimizations and cleanups (Rafael Wysocki, Philippe Longepe, Chen Yu, Joe Perches) - cpufreq powernv driver fixes and cleanups (Akshay Adiga, Shilpasri Bhat) - cpufreq qoriq driver fixes and cleanups (Jia Hongtao) - ACPI cpufreq driver cleanups (Viresh Kumar) - Assorted cpufreq driver updates (Ashwin Chaugule, Geliang Tang, Javier Martinez Canillas, Paul Gortmaker, Sudeep Holla) - Assorted cpufreq fixes and cleanups (Joe Perches, Arnd Bergmann) - Fixes and cleanups in the OPP (Operating Performance Points) framework, mostly related to OPP sharing, and reorganization of OF-dependent code in it (Viresh Kumar, Arnd Bergmann, Sudeep Holla) - New "passive" governor for devfreq (for SoC subsystems that will rely on someone else for the management of their power resources) and consolidation of devfreq support for Exynos platforms, coding style and typo fixes for devfreq (Chanwoo Choi, MyungJoo Ham) - PM core fixes and cleanups, mostly to make it work better with the generic power domains (genpd) framework, and updates for that framework (Ulf Hansson, Thierry Reding, Colin Ian King) - Intel Broxton support for the intel_idle driver (Len Brown) - cpuidle core optimization and fix (Daniel Lezcano, Dave Gerlach) - ARM cpuidle cleanups (Jisheng Zhang) - Intel Kabylake support for the RAPL power capping driver (Jacob Pan) - AVS (Adaptive Voltage Switching) rockchip-io driver update (Heiko Stuebner) - Updates for the cpupower tool (Arjun Sreedharan, Colin Ian King, Mattia Dongili, Thomas Renninger)" * tag 'pm-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (112 commits) intel_pstate: Clean up get_target_pstate_use_performance() intel_pstate: Use sample.core_avg_perf in get_avg_pstate() intel_pstate: Clarify average performance computation intel_pstate: Avoid unnecessary synchronize_sched() during initialization cpufreq: schedutil: Make default depend on CONFIG_SMP cpufreq: powernv: del_timer_sync when global and local pstate are equal cpufreq: powernv: Move smp_call_function_any() out of irq safe block intel_pstate: Clean up intel_pstate_get() cpufreq: schedutil: Make it depend on CONFIG_SMP cpufreq: governor: Fix handling of special cases in dbs_update() PM / OPP: Move CONFIG_OF dependent code in a separate file cpufreq: intel_pstate: Ignore _PPC processing under HWP cpufreq: arm_big_little: use generic OPP functions for {init, free}_opp_table PM / OPP: add non-OF versions of dev_pm_opp_{cpumask_, }remove_table cpufreq: tango: Use generic platdev driver PM / OPP: pass cpumask by reference cpufreq: Fix GOV_LIMITS handling for the userspace governor cpupower: fix potential memory leak PM / devfreq: style/typo fixes PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus ..
2016-04-28powercap, perf/x86/intel/rapl: Add PSys supportSrinivas Pandruvada
Skylake processor supports a new set of RAPL registers for controlling entire SoC instead of just CPU package. This is useful for thermal and power control when source of power/thermal is not just CPU/GPU. This change adds a new platform domain (AKA PSys) to the current power capping Intel RAPL driver. PSys also supports PL1 (long term) and PL2 (short term) control like package domain. This also follows same MSRs for energy and time units as package domain. Unlike package domain, PSys support requires more than just processor level implementation. The other parts in the system need additional implementation, which OEMs needs to support. So not all Skylake systems will support PSys. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jacob.jun.pan@linux.intel.com Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1460930581-29748-3-git-send-email-srinivas.pandruvada@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-26powercap/intel_rapl: Add support for KabylakeJacob Pan
Kabylake is similar to Skylake in terms of RAPL. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-05powercap: intel_rapl: Add missing Haswell modelSrinivas Pandruvada
Added missing model 0x46. Tested-and-reported-by: Piotr Maksymiuk <piotr.maksymiuk@movishell.pl> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09powercap/rapl: track lead cpu per packageJacob Pan
RAPL driver operates on MSRs that are under package/socket scope instead of core scope. However, the current code does not keep track of which CPUs are available on each package for MSR access. Therefore it has to search for an active CPU on a given package each time. This patch optimizes the package level operations by tracking a per package lead CPU during initialization and CPU hotplug. The runtime search for active CPU is avoided. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09powercap/rapl: add package reference per domainJacob Pan
This patch adds to each rapl domain a reference of the package it belongs to. At runtime, we can then avoid searching the package data for each access. It simplifies the domain level operations which depend on package level information. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-09powercap/rapl: reduce ipi callsJacob Pan
Reduce remote CPU calls for MSR access by combining read modify write into one function. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-12Merge branch 'powercap'Rafael J. Wysocki
* powercap: powercap: constify powercap_zone_ops and powercap_zone_constraint_ops structures
2016-01-12Merge branch 'acpi-soc'Rafael J. Wysocki
* acpi-soc: PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device ACPI / LPSS: power on when probe() and otherwise when remove() ACPI / LPSS: do delay for all LPSS devices when D3->D0 ACPI / LPSS: allow to use specific PM domain during ->probe() Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()" device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification x86/platform/iosf_mbi: Remove duplicate definitions Conflicts: drivers/i2c/busses/i2c-designware-platdrv.c
2016-01-02powercap: constify powercap_zone_ops and powercap_zone_constraint_ops structuresJulia Lawall
The powercap_zone_ops and powercap_zone_constraint_ops structures are never modified, so declare them as const. Most of the actual changes adjust indentation to accomodate the const keyword. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-12powercap / RAPL: fix BIOS lock checkPrarit Bhargava
Intel RAPL initialized on several systems where the BIOS lock bit (msr 0x610, bit 63) was set. This occured because the return value of rapl_read_data_raw() was being checked, rather than the value of the variable passed in, locked. This patch properly implments the rapl_read_data_raw() call to check the variable locked, and now the Intel RAPL driver outputs the warning: intel_rapl: RAPL package 0 domain package locked by BIOS and does not initialize for the package. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09x86/platform/iosf_mbi: Remove duplicate definitionsAndy Shevchenko
The read and write opcodes are global for all units on SoC and even across Intel SoCs. Remove duplication of corresponding constants. At the same time convert all current users. No functional change. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Boon Leong Ong <boon.leong.ong@intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-16powercap / RAPL: Enable Broxton RAPL supportAmy Wiles
Broxton CPU ID for the RAPL driver. Signed-off-by: Amy Wiles <amy.l.wiles@intel.com> [ rjw: Subject and changelog. ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29powercap / RAPL: disable the 2nd power limit properlySeiichi Ikarashi
Let rapl_unregister_powercap() disable the second power limit only if it exists. Intel64 SDM Vol.3 14.9 says that the package domain has it but neither the power plane domain nor the DRAM domain has it. Signed-off-by: Seiichi Ikarashi <s.ikarashi@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-01powercap / RAPL: Add support for Broadwell-HRadivoje Jovanovic
This patch enabled RAPL to support Broadwell-H Signed-off-by: Radivoje Jovanovic <radivoje.jovanovic@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-01powercap / RAPL: Add support for Skylake H/SRadivoje Jovanovic
This patche enabled RAPL to support Intel Skylake H/S Signed-off-by: Radivoje Jovanovic <radivoje.jovanovic@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-21powercap / RAPL: Support Knights LandingDasaratharaman Chandramouli
This patch enables intel_rapl driver to run on the next-generation Intel(R) Xeon Phi Microarchitecture code named "Knights Landing" Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-05powercap / RAPL: Floor frequency setting in Atom SoCAjay Thomas
CPU Floor frequency is set in BIOS for newer Atom SoCs. This patch handles configuration of floor frequency for different variants of Atom SoCs appropriately and ensures configuration of floor frequency is not done from driver for these newer Atom SoCs. Since address of the register for configuring floor frequency might change for different Atom SoCs, this patch also prevents potential overwriting of wrong registers. Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-15powercap / RAPL: Add support for Intel Skylake processorsBrian Bian
Signed-off-by: Brian Bian <brian.bian@intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-11powercap / RAPL: mark rapl_ids array as __initconstMathias Krause
The RAPL ids are only tested in rapl_init() which is itself an __init function. For the MODULE_DEVICE_TABLE() file2alias doesn't care about the section, just about the symbol name. Therefore it's safe to mark the rapl_ids[] array as __initconst so its memory can be released after initialization is done. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 19:47:52 +0000