| Age | Commit message (Collapse) | Author |
|---|
|
|
|
The fib6_info reference in rt6_info is rcu protected. Add a helper
to extract prefsrc from and update cxgbi_check_route6 to use it.
Fixes: 0153167aebd0 ("net/ipv6: Remove rt6i_prefsrc")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of direct list pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the conversion to fib6_info, rt6i_prefsrc has a single user that
reads the value and otherwise it is only set. The one reader can be
converted to use rt->from so rt6i_prefsrc can be removed, reducing
rt6_info by another 20 bytes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The QED driver commit, 1ac4329a1cff ("qed: Add configuration information
to register dump and debug data"), removes the CRC length validation
causing nvm_get_image failure while loading qedi driver:
[qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes
where only 00006004 are available
[qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12
Hence add and adjust the CRC size to iSCSI NVM image to read boot info at
qedi load time.
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The problem is that ->reset_state is a u8 but it can be set to -1 or -2 in
aac_tmf_callback() and the error handling in aac_eh_target_reset() relies
on it to be signed.
[mkp: fixed typo]
Fixes: 0d643ff3c353 ("scsi: aacraid: use aac_tmf_callback for reset fib")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit 328728630d9f2bf14b82ca30b5e47489beefe361.
There is fundamental issue in commit 328728630d9f2bf1 (scsi: core: avoid
host-wide host_busy counter for scsi_mq) because SCSI's host busy counter
may not be same with counter of blk-mq's inflight tags, especially in case
of none io scheduler.
We may switch to other approach for addressing this scsi_mq's performance
issue, such as percpu counter or kind of ways, so revert this commit first
for fixing this kind of issue in EH path, as reported by Jens.
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit 265d59aacbce7e50bdc1f5d25033c38dd70b3767.
There is fundamental issue in commit 328728630d9f2bf1 (scsi: core: avoid
host-wide host_busy counter for scsi_mq) because SCSI's host busy counter
may not be same with counter of blk-mq's inflight tags, especially in case
of none io scheduler.
So revert this commit first.
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
e2c7b43 was supposed to limit transfer length to 1MB, but got the unit of
max_sectors wrong.
Fixes: e2c7b433f729 ("scsi: hpsa: limit transfer length to 1MB")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A recent change added some MDS processing in the lpfc_drain_txq routine
that relies on the fcp_wq being allocated. For nvmet operation the fcp_wq
is not allocated because it can only be an nvme-target. When the original
MDS support was added LS_MDS_LOOPBACK was defined wrong, (0x16) it should
have been 0x10 (decimal value used for hex setting). This incorrect value
allowed MDS_LOOPBACK to be set simultaneously with LS_NPIV_FAB_SUPPORTED,
causing the driver to crash when it accesses the non-existent fcp_wq.
Correct the bad value setting for LS_MDS_LOOPBACK.
Fixes: ae9e28f36a6c ("lpfc: Add MDS Diagnostic support.")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change default behavior for fdmi registration to on.
[mkp: patch was mangled]
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
- use be32_to_cpu() instead of ntohs() for 32 bit port capabilities.
- add a new function fwcaps32_to_caps16() to convert 32 bit port
capabilities to 16 bit port capabilities.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The default was changed, but the help text was not updated.
Fix grammar (s/the option/this option/) while at it.
[mkp: drop "new" as suggested by John Garry]
Fixes: d5038a13eca72fb2 ("scsi: core: switch to scsi-mq by default")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
|
|
Slightly simpler code.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
Allows us to remove an explicit spinlock.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
|
|
Nobody commented on this patch back in July. So now it gets merged.
* SCSI_IOCTL_SEND_COMMAND cleanup:
scsi sg: remove incorrect scsi command checking logic
|
|
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs open-related updates from Al Viro:
- "do we need fput() or put_filp()" rules are gone - it's always fput()
now. We keep track of that state where it belongs - in ->f_mode.
- int *opened mess killed - in finish_open(), in ->atomic_open()
instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().
- alloc_file() wrappers with saner calling conventions are introduced
(alloc_file_clone() and alloc_file_pseudo()); callers converted, with
much simplification.
- while we are at it, saner calling conventions for path_init() and
link_path_walk(), simplifying things inside fs/namei.c (both on
open-related paths and elsewhere).
* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
few more cleanups of link_path_walk() callers
allow link_path_walk() to take ERR_PTR()
make path_init() unconditionally paired with terminate_walk()
document alloc_file() changes
make alloc_file() static
do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
new helper: alloc_file_clone()
create_pipe_files(): switch the first allocation to alloc_file_pseudo()
anon_inode_getfile(): switch to alloc_file_pseudo()
hugetlb_file_setup(): switch to alloc_file_pseudo()
ocxlflash_getfile(): switch to alloc_file_pseudo()
cxl_getfile(): switch to alloc_file_pseudo()
... and switch shmem_file_setup() to alloc_file_pseudo()
__shmem_file_setup(): reorder allocations
new wrapper: alloc_file_pseudo()
kill FILE_{CREATED,OPENED}
switch atomic_open() and lookup_open() to returning 0 in all success cases
document ->atomic_open() changes
->atomic_open(): return 0 in all success cases
get rid of 'opened' in path_openat() and the helpers downstream
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight fixes.
The most important one is the mpt3sas fix which makes the driver work
again on big endian systems. The rest are mostly minor error path or
checker issues and the vmw_scsi one fixes a performance problem"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED
scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled
scsi: mpt3sas: Swap I/O memory read value back to cpu endianness
scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO
scsi: fcoe: drop frames in ELS LOGO error path
scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send
scsi: qedi: Fix a potential buffer overflow
scsi: qla2xxx: Fix memory leak for allocating abort IOCB
|
|
We don't use blk-mq start/stop hw queue any more, so no reason to use
blk_mq_start_hw_queues which does clear_bit, replace it with
blk_mq_run_hw_queues.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch removes redundant trace that occurs when sending Device
Management(DM) request (fix behavior in commit 6667e6d91c88 ("scsi:
ufs: add trace event for ufs upiu").
Since the function send_command is called also for DM request, UPIU
trace for DM request is called twice- one identified as query_* the
other as send/complete.
Signed-off-by: Ohad Sharabi <ohad.sharabi@wdc.com>
Fixes: 6667e6d91c88 ("scsi: ufs: add trace event for ufs upiu")
Reviewed-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
qla2x00_els_dcmd2_sp_done()
This patch fixes following Smatch complaint:
drivers/scsi/qla2xxx/qla_iocb.c:2647 qla2x00_els_dcmd2_sp_done()
error: we previously assumed 'e' could be null (see line 2631)
Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
requesed -> requested
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Below kernel BUG was observed while running IOs with host reset (issued
from application),
mpt3sas_cm0: diag reset: SUCCESS
------------[ cut here ]------------
WARNING: CPU: 12 PID: 4336 at drivers/scsi/mpt3sas/mpt3sas_base.c:3282 mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G W ------------ 3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
Call Trace:
[<ffffffff9cf16583>] dump_stack+0x19/0x1b
[<ffffffff9c891698>] __warn+0xd8/0x100
[<ffffffff9c8917dd>] warn_slowpath_null+0x1d/0x20
[<ffffffffc04f3f4d>] mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
[<ffffffffc05047d2>] _scsih_flush_running_cmds+0x92/0xe0 [mpt3sas]
[<ffffffffc05095db>] mpt3sas_scsih_reset_handler+0x43b/0xaf0 [mpt3sas]
[<ffffffff9c894829>] ? vprintk_default+0x29/0x40
[<ffffffff9cf10531>] ? printk+0x60/0x77
[<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
[<ffffffffc04f794d>] mpt3sas_base_hard_reset_handler+0x1ad/0x420 [mpt3sas]
[<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
[<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
[<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
[<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
[<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
[<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
[<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
[<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
[<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
[<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
---[ end trace 5dac5b98d89aaa3c ]---
------------[ cut here ]------------
kernel BUG at block/blk-core.c:1476!
invalid opcode: 0000 [#1] SMP
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G W ------------ 3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
task: ffff903fc96e0fd0 ti: ffff903fb1eec000 task.ti: ffff903fb1eec000
RIP: 0010:[<ffffffff9cb19ec0>] [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
RSP: 0018:ffff903c6b783dc0 EFLAGS: 00010087
RAX: ffff903bb67026d0 RBX: ffff903b7d6a6140 RCX: dead000000000200
RDX: ffff903bb67026d0 RSI: ffff903bb6702580 RDI: ffff903bb67026d0
RBP: ffff903c6b783dd8 R08: ffff903bb67026d0 R09: ffffd97e80000000
R10: ffff903c658bac00 R11: 0000000000000000 R12: ffff903bb6702580
R13: ffff903fa9a292f0 R14: 0000000000000246 R15: 0000000000001057
FS: 00007f7026f5b740(0000) GS:ffff903c6b780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f298877c004 CR3: 00000000caf36000 CR4: 00000000000607e0
Call Trace:
<IRQ>
[<ffffffff9cca68ff>] __scsi_queue_insert+0xbf/0x110
[<ffffffff9cca79ca>] scsi_io_completion+0x5da/0x6a0
[<ffffffff9cc9ca3c>] scsi_finish_command+0xdc/0x140
[<ffffffff9cca6aa2>] scsi_softirq_done+0x132/0x160
[<ffffffff9cb240c6>] blk_done_softirq+0x96/0xc0
[<ffffffff9c89a905>] __do_softirq+0xf5/0x280
[<ffffffff9cf2bd2c>] call_softirq+0x1c/0x30
[<ffffffff9c82d625>] do_softirq+0x65/0xa0
[<ffffffff9c89ac85>] irq_exit+0x105/0x110
[<ffffffff9cf2d0a8>] smp_apic_timer_interrupt+0x48/0x60
[<ffffffff9cf297f2>] apic_timer_interrupt+0x162/0x170
<EOI>
[<ffffffff9cca5f41>] ? scsi_done+0x21/0x60
[<ffffffff9cb5ac18>] ? delay_tsc+0x38/0x60
[<ffffffff9cb5ab5d>] __const_udelay+0x2d/0x30
[<ffffffffc04effde>] _base_handshake_req_reply_wait+0x8e/0x4a0 [mpt3sas]
[<ffffffffc04f0b13>] _base_get_ioc_facts+0x123/0x590 [mpt3sas]
[<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
[<ffffffffc04f7993>] mpt3sas_base_hard_reset_handler+0x1f3/0x420 [mpt3sas]
[<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
[<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
[<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
[<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
[<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
[<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
[<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
[<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
[<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
[<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
Code: 83 c3 10 4c 89 e2 4c 89 ee e8 8d 21 04 00 48 8b 03 48 85 c0 75 e5 41 f6 44 24 4a 10 74 ad 4c 89 e6 4c 89 ef e8 b2 42 00 00 eb a0 <0f> 0b 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
RIP [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
RSP <ffff903c6b783dc0>
As a part of host reset operation, driver will flushout all IOs outstanding
at driver level with "DID_RESET" result. To find which are all commands
outstanding at the driver level, driver loops with smid starting from one
to HBA queue depth and calls mpt3sas_scsih_scsi_lookup_get() to get scmd as
shown below
for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
continue;
But in mpt3sas_scsih_scsi_lookup_get() function, driver returns some scsi
cmnds which are not outstanding at the driver level (possibly request is
constructed at block layer since QUEUE_FLAG_QUIESCED is not set. Even if
driver uses scsi_block_requests and scsi_unblock_requests, issue still
persists as they will be just blocking further IO from scsi layer and not
from block layer) and these commands are flushed with DID_RESET host bytes
thus resulting into above kernel BUG.
This issue got introduced by commit dbec4c9040ed ("scsi: mpt3sas: lockless
command submission").
To fix this issue, we have modified the mpt3sas_scsih_scsi_lookup_get() to
check for smid equals to zero (note: whenever any scsi cmnd is processing
at the driver level then smid for that scsi cmnd will be non-zero, always
it starts from one) before it returns the scmd pointer to the caller. If
smid is zero then this function returns scmd pointer as NULL and driver
won't flushout those scsi cmnds at driver level with DID_RESET host byte
thus this issue will not be observed.
[mkp: amended with updated fix from Sreekanth]
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission")
Cc: stable@vger.kernel.org # v4.16+
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We accidentally return success instead of -ENOMEM on this error path.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pointer STbuffer is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'STbuffer' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
|
|
Commands that are reset are returned with status
SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK |
SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte
to DID_RESET to allow upper layers to retry.
Tested by copying a large file between two pvscsi disks on same adapter
while performing a bus reset at 1-second intervals. Before fix, commands
sometimes fail with DID_OK. After fix, commands observed to fail with
DID_RESET.
Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
enabled
Surround scsi_execute() calls with scsi_autopm_get_device() and
scsi_autopm_put_device(). Note: removing sr_mutex protection from the
scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of
sr_mutex is to serialize cdrom_*() calls.
This patch avoids that complaints similar to the following appear in the
kernel log if runtime power management is enabled:
INFO: task systemd-udevd:650 blocked for more than 120 seconds.
Not tainted 4.18.0-rc7-dbg+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
systemd-udevd D28176 650 513 0x00000104
Call Trace:
__schedule+0x444/0xfe0
schedule+0x4e/0xe0
schedule_preempt_disabled+0x18/0x30
__mutex_lock+0x41c/0xc70
mutex_lock_nested+0x1b/0x20
__blkdev_get+0x106/0x970
blkdev_get+0x22c/0x5a0
blkdev_open+0xe9/0x100
do_dentry_open.isra.19+0x33e/0x570
vfs_open+0x7c/0xd0
path_openat+0x6e3/0x1120
do_filp_open+0x11c/0x1c0
do_sys_open+0x208/0x2d0
__x64_sys_openat+0x59/0x70
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Swap the I/O memory read value back to cpu endianness before storing it in
a data structures which are defined in the MPI headers where u8 components
are not defined in the endianness order.
In this area from day one mpt3sas driver is using le32_to_cpu() &
cpu_to_le32() APIs. But in commit cf6bf9710c
(mpt3sas: Bug fix for big endian systems) we have removed these APIs
before reading I/O memory which we should haven't done it. So
in this patch I am correcting it by adding these APIs back
before accessing I/O memory.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To avoid introducing problems like those fixed in commit f7068114d45e
("sr: pass down correctly sized SCSI sense buffer"), this creates a macro
wrapper for scsi_execute() that verifies the size of the sense buffer
similar to what was done for command string sizes in commit 3756f6401c30
("exec: avoid gcc-8 warning for get_task_comm").
Another solution could be to add a length argument to scsi_execute(),
but this function already takes a lot of arguments and Jens was not fond
of that approach.
Additionally, this moves the SCSI_SENSE_BUFFERSIZE definition into
scsi_device.h, and removes a redundant include for scsi_device.h from
scsi_cmnd.h.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a lot of needless struct request_sense usage in the CDROM
code. These can all be struct scsi_sense_hdr instead, to avoid any
confusion over their respective structure sizes. This patch is a lot
of noise changing "sense" to "sshdr", but the final code is more
readable to distinguish between "sense" meaning "struct request_sense"
and "sshdr" meaning "struct scsi_sense_hdr".
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split scsi_common.o out of SCSI so that non-SCSI users can pull it in
easily for future sense buffer helper usage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This removes the unused sense buffer in read_cap16() and write_same16().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch fixes regression introduced for the N2N support for FC-NVMe. For
FC-NVMe with N2N connection, instead of FW initiating the Login, Driver
starts Login process. This patch migrates that new process from a
standalone path into existing session management state machine. With this
state change now driver will not wait for pull NPort ID from FW.
Fixes: edd05de197592 ("scsi: qla2xxx: Changes to support N2N logins")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Save frame payload size from init control block. This field/data is used
to register with switch database. This allows the init control block temp
buf to be reused.
[mkp: remove unused variable]
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch sets and clears FCF_ASYNC_{SENT|ACTIVE} flags to prevent
stalling of relogin attempt. Once flag are correctly set/cleared, relogin
timer can retry relogin attempt for driver to continue login.
Fixes: fa83e65885b9 ("scsi: qla2xxx: ensure async flags are reset correctly")
Cc: stable@vger.kernel.org #4.17
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix race condition between switch cmd completion and timeout timer. Timer
has popped triggers command free. On IOCB completion, stale sp point was
reused. Instead, an abort will be sent to FW to nudge the command out of FW
where the normal completion will take place.
RIP: 0010:qla2x00_chk_ms_status+0xf3/0x1b0 [qla2xxx]
Call Trace:
<IRQ>
qla24xx_els_ct_entry.isra.15+0x1d4/0x2b0 [qla2xxx]
qla24xx_msix_rsp_q+0x39/0xf0 [qla2xxx]
qla24xx_process_response_queue+0xbc/0x2b0 [qla2xxx]
qla24xx_msix_rsp_q+0x8a/0xf0 [qla2xxx]
__handle_irq_event_percpu+0xa0/0x1f0
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After selecting the NPort handle/loop_id, set a bit in the loop_id_map to
prevent others from selecting the same NPort handle.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Flush pending mailbox commands on chip reset. Wake up command that's
waiting for an interrupt and wait for mailbox counters to go to zero.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During normal IO, FW can return IO with 'port unavailble' status. Driver
would send a LOGO to remote port for session resync. On an off chance, a
PLOGI could arrive before sending the LOGO. This patch will skip sendiing
LOGO if a PLOGI just came in.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch sets discovery state back to GNL (Get Name List) when session is
stuck at GPDB (Get Port DataBase). This will allow state machine to retry
login and move session state ahead in discovery.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prevent multiple registrations with transport layer for the same remote
port.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Driver uses shadow pointer instead of Mirror pointer for firmware dump
collection. Skip those entries for Mirror pointers for Request/Response
queue from firmware dump template reading.
Following messages are printed in log messages:
qla27xx_fwdt_entry_t268: unknown buffer 4
qla27xx_fwdt_entry_t268: unknown buffer 5
This patch fixes these error messages by adding skip_entry() to not read
them from template.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prevent user from sending commands through sysfs while firmware is not
running or reset is in progress.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
