aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi/spi-qup.c
AgeCommit message (Collapse)Author
2021-04-09spi: qup: fix PM reference leak in spi_qup_remove()Wang Li
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210409095458.29921-1-wangli74@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14spi: qup: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200910150410.750959-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-21spi: qup: call spi_qup_pm_resume_runtime before suspendingYuji Sasaki
spi_qup_suspend() will cause synchronous external abort when runtime suspend is enabled and applied, as it tries to access SPI controller register while clock is already disabled in spi_qup_pm_suspend_runtime(). Signed-off-by: Yuji sasaki <sasakiy@chromium.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200214074340.2286170-1-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15spi: qup: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094256.1108-7-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-04Merge branch 'spi-5.3' into spi-nextMark Brown
2019-07-04Merge branch 'spi-5.2' into spi-linusMark Brown
2019-06-13spi: qup: fix PIO/DMA transfers.Jorge Ramirez-Ortiz
- DMA/PIO: If an error IRQ occurred during PIO or DMA mode make sure to log it so on completion the transfer can be marked as an error. - PIO: Do not complete a transaction until all data has been transferred or an error IRQ was flagged. 1) If there was no error IRQ, ignore the done flag IRQ (QUP_OP_MAX_INPUT_DONE_FLAG) until all data for the transfer has been processed: not doing so risks completing the transfer returning uninitialized data in the buffers. 2) Under stress testing we have identified the need to protect read/write operations against spurious IN/OUT service events. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10Merge tag 'v5.2-rc4' into spi-5.3Mark Brown
Linux 5.2-rc4
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 409Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license rev 2 and only rev 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190112.583753585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03spi: qup: remove unnecessary gotoJorge Ramirez-Ortiz
Remove unnecessary condition check and associated goto. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10spi: qup: fix 64-bit build warningArnd Bergmann
On 64-bit systems, pointers are wider than 'int' variables, so we get a warning about a cast between them: drivers/spi/spi-qup.c:1060:23: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] This changes the code to use the correct uintptr_t cast. Fixes: 4d023737b2ef ("spi: qup: Fix QUP version identify method") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-10spi: qup: hide warning for uninitialized variableArnd Bergmann
The added conditionals in this function apparently confused gcc to the point that it no longer sees the code is safe and instead shows a false-positive warning: drivers/spi/spi-qup.c: In function 'spi_qup_transfer_one': drivers/spi/spi-qup.c:507:28: error: 'tx_nents' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/spi/spi-qup.c:464:17: note: 'tx_nents' was declared here drivers/spi/spi-qup.c:505:28: error: 'rx_nents' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/spi/spi-qup.c:464:7: note: 'rx_nents' was declared here This moves the initialization to a place that makes it obvious to the compiler. Fixes: 5884e17ef3cb ("spi: qup: allow multiple DMA transactions per spi xfer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Fix QUP version identify methodVaradarajan Narayanan
Use of_device_get_match_data to identify QUP version instead of of_device_is_compatible. Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Ensure done detectionVaradarajan Narayanan
This patch fixes an issue where a SPI transaction has completed, but the done condition is missed. This occurs because at the time of interrupt the MAX_INPUT_DONE_FLAG is not asserted. However, in the process of reading blocks of data from the FIFO, the last portion of data comes in. The opflags read at the beginning of the irq handler no longer matches the current opflag state. To get around this condition, the block read function should update the opflags so that done detection is correct after the return. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: allow multiple DMA transactions per spi xferVaradarajan Narayanan
Much like the block mode changes, we are breaking up DMA transactions into 64K chunks so we can reset the QUP engine. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: refactor spi_qup_prep_sgVaradarajan Narayanan
Take specific sgl and nent to be prepared. This is in preparation for splitting DMA into multiple transacations, this contains no code changes just refactoring. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: allow block mode to generate multiple transactionsVaradarajan Narayanan
This let's you write more to the SPI bus than 64K-1 which is important if the block size of a SPI device is >= 64K or some other device wants to do something larger. This has the benefit of completely removing spi_message from the spi-qup transactions Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: call io_config in mode specific functionVaradarajan Narayanan
DMA transactions should only only need to call io_config only once, but block mode might call it several times to setup several transactions so it can handle reads/writes larger than the max size per transaction, so we move the call to the do_ functions. This is just refactoring, there should be no functional change Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: refactor spi_qup_io_config into two functionsVaradarajan Narayanan
This is in preparation for handling transactions larger than 64K-1 bytes in block mode, which is currently unsupported and quietly fails. We need to break these into two functions 1) prep is called once per spi_message and 2) io_config is called once per spi-qup bus transaction This is just refactoring, there should be no functional change Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Do block sized read/write in block modeVaradarajan Narayanan
This patch corrects the behavior of the BLOCK transactions. During block transactions, the controller must be read/written to in block size transactions. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Fix transaction done signalingVaradarajan Narayanan
Wait to signal done until we get all of the interrupts we are expecting to get for a transaction. If we don't wait for the input done flag, we can be in between transactions when the done flag comes in and this can mess up the next transaction. While here cleaning up the code which sets controller->xfer = NULL and restores it in the ISR. This looks to be some debug code which is not required. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Fix error handling in spi_qup_prep_sgVaradarajan Narayanan
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Place the QUP in run mode before DMAVaradarajan Narayanan
Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Add completion timeoutVaradarajan Narayanan
Add i/o completion timeout for DMA and PIO modes. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Setup DMA mode correctlyVaradarajan Narayanan
To operate in DMA mode, the buffer should be aligned and the size of the transfer should be a multiple of block size (for v1). And the no. of words being transferred should be programmed in the count registers appropriately. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-08spi: qup: Enable chip select supportVaradarajan Narayanan
Enable chip select support for QUP versions later than v1. The chip select support was broken in QUP version 1. Hence the chip select support was removed earlier in an earlier commit (4a8573abe "spi: qup: Remove chip select function"). Since the chip select support is functional in recent versions of QUP, re-enabling it for QUP versions later than v1. Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-30Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', ↵Mark Brown
'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next
2016-09-01spi: qup: skip clk_disable_unprepare if the device is already runtime suspendedSudeep Holla
If the spi device is already runtime suspended, if spi_qup_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the a splat from unpreparing a non-prepared clock. This patch fixes the issue by executing clk_disable_unprepare conditionally in spi_qup_suspend. [Reworded commit message to remove irrelevant backtrace -- broonie] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-27spi: qup: Remove spi_master_put in spi_qup_remove()Wei Yongjun
The call to spi_master_put() in spi_qup_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in spi_qup_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02spi: qup: Add spi_master_put in remove functionPramod Gurav
Release memory allocated for spi master by calling spi_master_put in .remove function. Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02spi: qup: Handle clocks in pm_runtime suspend and resumePramod Gurav
Clocks must ne disabled in pm_runtime to achieve some power saving. Enable the clocks when the device is runtime resumed during a transfer. Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-11Merge remote-tracking branches 'spi/topic/qup', 'spi/topic/rockchip', ↵Mark Brown
'spi/topic/rspi', 'spi/topic/s3c64xx' and 'spi/topic/sc18is602' into spi-next
2015-03-07spi: qup: Add DMA capabilitiesAndy Gross
This patch adds DMA capabilities to the spi-qup driver. If DMA channels are present, the QUP will use DMA instead of block mode for transfers to/from SPI peripherals for transactions larger than the length of a block. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-07spi: qup: Fix cs-num DT property parsingIvan T. Ivanov
num-cs is 32 bit property, don't read just upper 16 bits. Fixes: 4a8573abe965 (spi: qup: Remove chip select function) Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-12-29spi: qup: Add SPI_CPOL configuration supportIvan T. Ivanov
Device support SPI_CPOL, but driver have missed to add support for this configuration. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-18Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-13spi: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-04Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pl022', ↵Mark Brown
'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/rspi' into spi-next
2014-06-22spi: qup: Remove chip select functionAndy Gross
This patch removes the chip select function. Chip select should instead be supported using GPIOs, defining the DT entry "cs-gpios", and letting the SPI core assert/deassert the chip select as it sees fit. The chip select control inside the controller is buggy. It is supposed to automatically assert the chip select based on the activity in the controller, but it is buggy and doesn't work at all. So instead we elect to use GPIOs. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: qup: Add support for v1.1.1Andy Gross
This patch adds support for v1.1.1 of the SPI QUP controller. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: qup: Fix order of spi_register_masterAndy Gross
This patch moves the devm_spi_register_master below the initialization of the runtime_pm. If done in the wrong order, the spi_register_master fails if any probed slave devices issue SPI transactions. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-02Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/fsl', ↵Mark Brown
'spi/topic/fsl-espi' and 'spi/topic/id-const' into spi-next
2014-05-14spi: qup: Correct selection of FIFO/Block modeAndy Gross
This patch fixes the calculation for determining whether to use FIFO or BLOCK mode. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-07spi: qup: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-03spi: qup: Fix return value checking for pm_runtime_get_sync()Axel Lin
pm_runtime_get_sync() returns 1 if !CONFIG_PM_RUNTIME. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26spi: qup: Get rid of using struct spi_qup_deviceAxel Lin
Current code uses struct spi_qup_device to store spi->mode and spi->chip_select settings. We can get these settings in spi_qup_transfer_one and spi_qup_set_cs without using struct spi_qup_device. Refactor the code a bit to remove spi_qup_setup(), spi_qup_cleanup(), and struct spi_qup_device. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24spi: qup: Remove module versionAxel Lin
The module version is unlikely to be updated, use kernel version should be enough. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: qup: Fix build error due to a typoAxel Lin
Fix below build error when CONFIG_PM_RUNTIME=y: C [M] drivers/spi/spi-qup.o drivers/spi/spi-qup.c: In function 'spi_qup_pm_suspend_runtime': drivers/spi/spi-qup.c:712:12: error: 'QUP_CLOCK_AUTO_GATE' undeclared (first use in this function) drivers/spi/spi-qup.c:712:12: note: each undeclared identifier is reported only once for each function it appears in drivers/spi/spi-qup.c: In function 'spi_qup_pm_resume_runtime': drivers/spi/spi-qup.c:725:13: error: 'QUP_CLOCK_AUTO_GATE' undeclared (first use in this function) make[2]: *** [drivers/spi/spi-qup.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: qup: Convert ot let spi core handle checking transfer speedAxel Lin
Set master->max_speed_hz then spi core will handle checking transfer speed. So we can remove the same checking in this driver. Also remove checking spi->chip_select in spi_qup_setup(), the checking is done by spi core. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 00:31:39 +0000