aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2019-08-05Merge tag 'spi-fix-v5.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A bunch of small, device specific things here plus a DT bindings fix for the new validatable YAML binding format. The most notable thing is the fix for GPIO chip selects which fixes a corner case in updates of that code to modern APIs, unfortunately due to a historical mess the code around GPIO support is obscure, fragile and an ABI which makes and attempt to improve the situation painful" * tag 'spi-fix-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: Add support for Intel Tiger Lake spi: bcm2835: Fix 3-wire mode if DMA is enabled spi: pxa2xx: Balance runtime PM enable/disable on error spi: gpio: Add SPI_MASTER_GPIO_SS flag spi: spi-fsl-qspi: change i.MX7D RX FIFO size spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg
2019-08-02spi: pxa2xx: Add support for Intel Tiger LakeJarkko Nikula
Intel Tiger Lake -LP LPSS SPI controller is otherwise similar than Cannon Lake but has more controllers and up to two chip selects per controller. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190801134901.12635-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24spi: bcm2835: Fix 3-wire mode if DMA is enabledLukas Wunner
Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22spi: pxa2xx: Balance runtime PM enable/disable on errorLubomir Rintel
Don't undo the PM initialization if we error out before we managed to initialize it. The call to pm_runtime_disable() without being preceded by pm_runtime_enable() would disturb the balance of the Force. In practice, this happens if we fail to allocate any of the GPIOS ("cs", "ready") due to -EPROBE_DEFER because we're getting probled before the GPIO driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20190719122713.3444318-1-lkundrak@v3.sk Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-17spi: gpio: Add SPI_MASTER_GPIO_SS flagLinus Walleij
The GPIO SPI master has some code in its local CS callback to set the initial sck GPIO value. This was lost in the commit converting it to use SPI core GPIO handling as this callback isn't called if the internal GPIO handling is active. Add the special SPI_MASTER_GPIO_SS to ascertain it gets called anyway so we get the initial SCK setting right. There is some platform provided GPIO handling there as well but this will be skipped as the cs_gpios will be NULL. My test targets seem not to care about the initial SCK value so I am uncertain if this is a regression, but to preserve the previous semantic we better do this. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190716204651.7743-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-10spi: spi-fsl-qspi: change i.MX7D RX FIFO sizeHan Xu
The RX FIFO should be 128 byte rather than 512 byte. It's a typo on reference manual. Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20190710023128.13115-3-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-04Merge remote-tracking branch 'spi/topic/pump-rt' into spi-nextMark Brown
2019-07-04Merge branch 'spi-5.3' into spi-nextMark Brown
2019-07-04Merge branch 'spi-5.2' into spi-linusMark Brown
2019-07-03spi: pxa2xx: Add support for Intel Elkhart LakeJarkko Nikula
Intel Elkhart Lake has the same LPSS than Intel Broxton. Add support for it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190703114603.22301-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02spi: atmel-quadspi: fix resume callTudor Ambarus
When waking up from the Suspend-to-RAM state, the following error was seen: m25p80 spi2.0: flash operation timed out The flash remained in an undefined state, returning 0xFFs. Fix it by setting the Serial Clock Baud Rate, as it was set before the conversion to SPIMEM. Tested with sama5d2_xplained and mx25l25673g spi-nor in Backup + Self-Refresh and Suspend modes. Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Reported-by: Mark Deneen <mdeneen@gmail.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02spi: atmel-quadspi: void return type for atmel_qspi_init()Tudor Ambarus
commit 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") removed the error path from atmel_qspi_init(), but not changed the function's return type. Set void return type for atmel_qspi_init(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-02spi: pxa2xx: Set minimum transfer speedJarkko Nikula
It is possible to request a transfer with a speed lower than supported by the HW. This causes silent divider calculation underflow in ssp_get_clk_div() which leads to a frequency higher than requested. Up to maximum speed of the controller. Set the minimum supported transfer speed and let the SPI core to validate no transfers have speed lower than supported. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28spi: stm32-qspi: remove signal sensitive on completionLudovic Barre
On umount step a sigkill signal is set (without user specific action), due to sigkill signal the completion will be interrupted and the data transfer can't be finished if a sync is needed. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26spi: uniphier: fix zero-length transferKeiji Hayashibara
The zero-length transfer results in timeout error because the transfer doesn't start. This commit modified to return success in this case. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26spi: uniphier: fix timeout errorKeiji Hayashibara
Timeout error was silently ignored. This commit adds timeout error handling and modifies return type of wait_for_completion_timeout(). Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24spi/acpi: avoid spurious matches during slave enumerationArd Biesheuvel
In the new SPI ACPI slave enumeration code, we use the value of lookup.max_speed_khz as a flag to decide whether a match occurred. However, doing so only makes sense if we initialize its value to zero beforehand, or otherwise, random junk from the stack will cause spurious matches. So zero initialize the lookup struct fully, and only set the non-zero members explicitly. Fixes: 4c3c59544f33 ("spi/acpi: enumerate all SPI slaves in the namespace") Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usagePatrice Chotard
On STM32 F4/F7/H7 SoCs, FTHRES is a 5 bits field in QSPI_CR register, but for STM32MP1 SoCs, FTHRES is a 4 bits field long. CR_FTHRES_MASK definition is not correct. As for all these SoCs, FTHRES field is set to 3, FIELD_PREP() macro is used with a constant as second parameter which make its usage useless. CR_FTHRES_MASK and FIELD_PREP() can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20spi: fix ctrl->num_chipselect constraintTudor Ambarus
at91sam9g25ek showed the following error at probe: atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers atmel_spi: probe of f0000000.spi failed with error -22 Commit 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set") moved the calling of spi_get_gpio_descs() after ctrl->dev is set, but didn't move the !ctrl->num_chipselect check. When there are chip selects in the device tree, the spi-atmel driver lets the SPI core discover them when registering the SPI master. The ctrl->num_chipselect is thus expected to be set by spi_get_gpio_descs(). Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was before the aforementioned commit. While touching this block, get rid of the explicit comparison with 0 and update the commenting style. Fixes: 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20spi: spi-synquacer: Fixed build on architectures missing readsl/writesl seriesMasahisa Kojima
kbuild test reported that alpha and some of the architectures are missing readsl/writesl series. Use more portable ioread32_rep()/iowrite32_rep() series. Fixes: b0823ee35cf9b ("spi: Add spi driver for Socionext SynQuacer platform") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 gpl v2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081205.495444859@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation the gpl this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license version 2 gplv2 for more details you should have received a copy of the gnu general public license version 2 gplv2 along with this source code extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19spi/acpi: fix incorrect ACPI parent checkArd Biesheuvel
The ACPI device object parsing code for SPI slaves enumerates the entire ACPI namespace to look for devices that refer to the master in question via the 'resource_source' field in the 'SPISerialBus' resource. If that field does not refer to a valid ACPI device or if it refers to the wrong SPI master, we should disregard the device. Current, the valid device check is wrong, since it gets the polarity of 'status' wrong. This could cause issues if the 'resource_source' field is bogus but parent_handle happens to refer to the correct master (which is not entirely imaginary since this code runs in a loop) So test for ACPI_FAILURE() instead, to make the code more self explanatory. Fixes: 4c3c59544f33 ("spi/acpi: enumerate all SPI slaves in the namespace") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-18spi: don't open code list_for_each_entry_safe_reverse()Vladimir Zapolskiy
The loop declaration in function spi_res_release() can be simplified by reusing the common list_for_each_entry_safe_reverse() helper macro. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17spi: No need to assign dummy value in spi_unregister_controller()Andy Shevchenko
The device_for_each_child() doesn't require the returned value to be checked. Thus, drop the dummy variable completely and have no warning anymore: drivers/spi/spi.c: In function ‘spi_unregister_controller’: drivers/spi/spi.c:2480:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] int dummy; ^~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-13spi/acpi: enumerate all SPI slaves in the namespaceArd Biesheuvel
Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-13spi: qup: fix PIO/DMA transfers.Jorge Ramirez-Ortiz
- DMA/PIO: If an error IRQ occurred during PIO or DMA mode make sure to log it so on completion the transfer can be marked as an error. - PIO: Do not complete a transaction until all data has been transferred or an error IRQ was flagged. 1) If there was no error IRQ, ignore the done flag IRQ (QUP_OP_MAX_INPUT_DONE_FLAG) until all data for the transfer has been processed: not doing so risks completing the transfer returning uninitialized data in the buffers. 2) Under stress testing we have identified the need to protect read/write operations against spurious IN/OUT service events. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10Merge tag 'v5.2-rc4' into spi-5.3Mark Brown
Linux 5.2-rc4
2019-06-10Merge tag 'spi-fix-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of fixes here. One core fix for error handling when we fail to set up the hardware before initiating a transfer and another one reverting a change in the core which broke Raspberry Pi in common use cases as part of some optimization work. There's also a couple of driver specific fixes" * tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: abort spi_sync if failed to prepare_transfer_hardware spi: spi-fsl-spi: call spi_finalize_current_message() at the end spi: bitbang: Fix NULL pointer dereference in spi_unregister_master spi: Fix Raspberry Pi breakage
2019-06-10spi: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct spi_replaced_transfers { ... struct spi_transfer inserted_transfers[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: insert * sizeof(struct spi_transfer) + sizeof(struct spi_replaced_transfers) with: struct_size(rxfer, inserted_transfers, insert) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06spi: mediatek: add SPI_LSB_FIRST supportLeilk Liu
this patch add SPI_LSB_FIRST feature support. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 30 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.872212424@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 409Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license rev 2 and only rev 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190112.583753585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 352Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081035.310807637@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 310Thomas Gleixner
Based on 1 normalized pattern(s): may be copied or modified under the terms of the gnu general public license version 2 [0] [only] see linux copying for more information extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.341514676@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 296Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gplv2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.986607096@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04spi: Add spi driver for Socionext SynQuacer platformMasahisa Kojima
This patch adds support for controller found on synquacer platforms. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-03spi: qup: remove unnecessary gotoJorge Ramirez-Ortiz
Remove unnecessary condition check and associated goto. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>