| Age | Commit message (Collapse) | Author |
|---|
|
RFC7143 states that Initiator decides what type of authentication to
use:
The initiator MUST continue with:
CHAP_N=<N> CHAP_R=<R>
or, if it requires target authentication, with:
CHAP_N=<N> CHAP_R=<R> CHAP_I=<I> CHAP_C=<C>
Allow one way authentication if mutual authentication is configured. That
passes some tests from Windows HLK for Mutual CHAP with iSNS.
Link: https://lore.kernel.org/r/20220718152555.17084-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Allow negotiating AuthMethod=None at CSG=0 (Security Negotiation) when
authentication is not required. That is required by the CHAP test in
Windows HLK.
Link: https://lore.kernel.org/r/20220718152555.17084-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
RFC7143 allows both Base64 and Hex encoding for CHAP binary entities like
Challenge and Response. Currently the Linux iSCSI target supports only Hex
encoding.
Add support for Base64 encoded CHAP Challenge and CHAP Response required
for CHAP tests in Windows HLK.
Link: https://lore.kernel.org/r/20220718152555.17084-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Variable length SCSI commands are transferred over iSCSI via two CDB
buffers - in Basic Header Segment and in Additional Header Segment (AHS).
Since AHS is not supported yet, a target reads just BHS (48 byte) from TCP
and treats the remaining octets as a next new iSCSI PDU that causes
protocol errors.
Add support for the Extended CDB AHS type.
Link: https://lore.kernel.org/r/20220718152555.17084-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When building with Clang we encounter these warnings:
| drivers/target/iscsi/iscsi_target_login.c:719:24: error: format
| specifies type 'unsigned short' but the argument has type 'int'
| [-Werror,-Wformat] " from node: %s\n", atomic_read(&sess->nconn),
-
| drivers/target/iscsi/iscsi_target_login.c:767:12: error: format
| specifies type 'unsigned short' but the argument has type 'int'
| [-Werror,-Wformat] " %s\n", atomic_read(&sess->nconn),
-
| drivers/target/iscsi/iscsi_target.c:4365:12: error: format specifies
| type 'unsigned short' but the argument has type 'int' [-Werror,-Wformat]
| " %s\n", atomic_read(&sess->nconn)
For all warnings, the format specifier is '%hu' which describes an unsigned
short. The resulting type of atomic_read is an int. The proposed fix is to
listen to Clang and swap the format specifier.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://lore.kernel.org/r/20220718180421.49697-1-justinstitt@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix following coccicheck error:
./drivers/target/iscsi/iscsi_target_nego.c:831:13-26: ERROR: se_nacl is NULL but dereferenced.
Link: https://lore.kernel.org/r/20220613014321.107045-1-yang.lee@linux.alibaba.com
Fixes: a75fcb0912a5 ("scsi: target: iscsi: Extract auth functions")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add acls/{ACL}/attrib/authentication attribute that controls authentication
for particular ACL. By default, this attribute inherits a value of the
authentication attribute of the target port group to keep backward
compatibility.
Authentication attribute has 3 states:
"0" - authentication is turned off for this ACL
"1" - authentication is required for this ACL
"-1" - authentication is inherited from TPG
Link: https://lore.kernel.org/r/20220523095905.26070-4-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Create functions that answers simple questions: Whether authentication is
required, what credentials, whether connection is autenticated.
Link: https://lore.kernel.org/r/20220523095905.26070-3-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iSCSI target is cluttered with open-coded container_of() conversions from
se_nacl to iscsi_node_acl. The code could be cleaned by introducing a
helper - to_iscsi_nacl() (similar to other helpers in target core).
While at it, make another iSCSI conversion helper consistent and rename
iscsi_tpg() helper to to_iscsi_tpg().
Link: https://lore.kernel.org/r/20220523095905.26070-2-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
|
|
In commit d72d827f2f26, I used 'cpumask_t' incorrectly:
void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
{
int ord, cpu;
cpumask_t conn_allowed_cpumask;
......
}
static ssize_t lio_target_wwn_cpus_allowed_list_store(
struct config_item *item, const char *page, size_t count)
{
int ret;
char *orig;
cpumask_t new_allowed_cpumask;
......
}
The correct pattern should be as follows:
cpumask_var_t mask;
if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
... use 'mask' here ...
free_cpumask_var(mask);
Link: https://lore.kernel.org/r/20220516054721.1548-1-mingzhe.zou@easystack.cn
Fixes: d72d827f2f26 ("scsi: target: Add iscsi/cpus_allowed_list in configfs")
Reported-by: Test Bot <zgrieee@gmail.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The structure iscsi_session naming is used by the iSCSI initiator
driver. Rename the target session to iscsit_session to have more readable
code.
Link: https://lore.kernel.org/r/20220428092939.36768-3-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The structure iscsi_conn naming is used by the iSCSI initiator
driver. Rename the target conn to iscsit_conn to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-2-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The structure iscsi_cmd naming is used by the iSCSI initiator driver.
Rename the target cmd to iscsit_cmd to have more readable code.
Link: https://lore.kernel.org/r/20220428092939.36768-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.
When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.
Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.
Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.
Break the outer loop after finding a match and make sure the np under each
tpg is unique.
Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn
Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable Delayed ACK to reduce the number of TCP ACKs.
Link: https://lore.kernel.org/r/1634135109-5044-1-git-send-email-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current value of max DataSegmentLength is 8K. T5/T6 adapters support
DataSegmentLength upto 16K. Increase max DataSegmentLength.
Link: https://lore.kernel.org/r/1634135087-4996-1-git-send-email-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation
instead.
Link: https://lore.kernel.org/r/20210910084133.17956-3-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The variable ret is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20210721101519.42299-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
|
|
The continue statement at the end of a loop has no effect, remove it.
Link: https://lore.kernel.org/r/20210617114347.10247-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")
|
|
The structure pointer passed to container_of() is never NULL; that was
already checked. That means that the result of container_of() operations
on it is also never NULL, even though se_node_acl is the first element
of the structure embedding it. On top of that, it is misleading to perform
a NULL check on the result of container_of() because the position of the
contained element could change, which would make the test invalid.
Remove the unnecessary NULL check.
As it turns out, the container_of operation was only made for the purpose
of the NULL check. If the container_of is actually needed, it is repeated
later. Remove the container_of operation as well.
The NULL check was identified and removed with the following Coccinelle
script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Link: https://lore.kernel.org/r/20210510040817.2050266-1-linux@roeck-us.net
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hou Pu <houpu@bytedance.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of calling dma_unmap_sg() after completing WRITE I/O, call
dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer.
Link: https://lore.kernel.org/r/1618403949-3443-1-git-send-email-varun@chelsio.com
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use kmemdup_nul() helper instead of open-coding to simplify the code.
Link: https://lore.kernel.org/r/20210402092517.2445595-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve a couple of conflicts between the 5.12 fixes branch and the
5.13 staging tree (iSCSI target and UFS).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
target_sequencer_start event is triggered inside target_cmd_init_cdb().
se_cmd.tag is not initialized with ITT at the moment so the event always
prints zero tag.
Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoids calling memset().
Link: https://lore.kernel.org/r/20210228055645.22253-13-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unused macro to fix the following compilation warning:
drivers/target//iscsi/iscsi_target_util.c:31: warning: macro "PRINT_BUFF" is not used [-Wunused-macros]
#define PRINT_BUFF(buff, len) \
Link: https://lore.kernel.org/r/20210228055645.22253-12-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unused macro to fix the following compilation warning:
drivers/target//iscsi/iscsi_target_nego.c:31: warning: macro "TEXT_LEN" is not used [-Wunused-macros]
#define TEXT_LEN 4096
Link: https://lore.kernel.org/r/20210228055645.22253-11-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove unused macro to fix the following compilation warning:
drivers/target//iscsi/iscsi_target_stat.c:31: warning: macro "ISCSI_INST_LAST_FAILURE_TYPE" is not used [-Wunused-macros]
#define ISCSI_INST_LAST_FAILURE_TYPE 0
Link: https://lore.kernel.org/r/20210228055645.22253-10-chaitanya.kulkarni@wdc.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename transport_init_se_cmd() to __target_init_cmd() to reflect that it is
more of an internal function that drivers should normally not use and
because we are going to add a new init function in the next patches.
Link: https://lore.kernel.org/r/20210227170006.5077-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
|
|
and ulds
The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.
As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.
Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The return value of iscsit_check_session_usage_count() is only checked if
it was not allowed to sleep. If it returns `2' then a timer is prepared. If
it returns something else or if it was allowed to sleep then it is ignored.
Let iscsit_check_session_usage_count() return true if it needs to arm the
timer - otherwise false. This simplifies the code flow of the only caller.
Link: https://lore.kernel.org/r/20201220203638.43615-4-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsit_check_session_usage_count()
iscsit_check_session_usage_count() uses in_interrupt() to find out if it is
safe to invoke wait_for_completion().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
There is only one caller of iscsit_check_session_usage_count() which
already has an argument indicating if it is safe to sleep.
Extend iscsit_check_session_usage_count() by an argument indicating if it
may sleep.
Link: https://lore.kernel.org/r/20201220203638.43615-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsit_close_session() uses in_interrupt() to decide if it needs to check
the return value of iscsit_check_session_usage_count() if it was not able
to sleep.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
iscsit_close_session() has two callers:
- iscsit_handle_time2retain_timeout()
A timer_list callback.
- iscsit_close_connection()
Runs in preemptible context, acquires a mutex.
Add an argument to iscsit_close_session() indicating if sleeping is
possible.
Link: https://lore.kernel.org/r/20201220203638.43615-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct the spelling of Nagle's name in a comment.
Link: https://lore.kernel.org/r/2921.1610694423@turing-police
Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com>
Signed-off-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Maurizio found a race where the abort and cmd stop paths can race as
follows:
1. thread1 runs iscsit_release_commands_from_conn and sets
CMD_T_FABRIC_STOP.
2. thread2 runs iscsit_aborted_task and then does __iscsit_free_cmd. It
then returns from the aborted_task callout and we finish
target_handle_abort and do:
target_handle_abort -> transport_cmd_check_stop_to_fabric ->
lio_check_stop_free -> target_put_sess_cmd
The cmd is now freed.
3. thread1 now finishes iscsit_release_commands_from_conn and runs
iscsit_free_cmd while accessing a command we just released.
In __target_check_io_state we check for CMD_T_FABRIC_STOP and set the
CMD_T_ABORTED if the driver is not cleaning up the cmd because of a session
shutdown. However, iscsit_release_commands_from_conn only sets the
CMD_T_FABRIC_STOP and does not check to see if the abort path has claimed
completion ownership of the command.
This adds a check in iscsit_release_commands_from_conn so only the abort or
fabric stop path cleanup the command.
Link: https://lore.kernel.org/r/1605318378-9269-1-git-send-email-michael.christie@oracle.com
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
|
|
The variable ret has been initialized with a value '0'. The assignment in
switch-case is redundant. Remove it.
Link: https://lore.kernel.org/r/20200914023207.113792-1-jingxiangfeng@huawei.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eleven fixes, mostly in drivers or minor fixes in driver related
infrastructure libraries (target, libfc and libsas).
Most of the bugs fixed only show up under rare circumstances, the
exception being the endianness problem in qla2xxx which is used as a
device on some sparc systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Don't call disable_irq from IRQ poll handler
scsi: megaraid_sas: Don't call disable_irq from process IRQ poll
scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
scsi: target: iscsi: Fix data digest calculation
scsi: lpfc: Update lpfc version to 12.8.0.4
scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events
scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask
scsi: qla2xxx: Fix regression on sparc64
scsi: libfc: Fix for double free()
scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
|
|
tpg->np_login_sem
The iSCSI target login thread might get stuck with the following stack:
cat /proc/`pidof iscsi_np`/stack
[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30
This can be reproduced via the following steps:
1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing
PDU exchange in the login thread and before the negotiation is finished
the the network link goes down. At this point A has not finished login
and tpg->np_login_sem is held.
2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing
PDU exchange in the login thread the target expects to process remaining
login PDUs in workqueue context.
3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new
socket. A' will wait for tpg->np_login_sem with np->np_login_timer
loaded to wait for at most 15 seconds. The lock is held by A so A'
eventually times out.
4. Before A' got timeout initiator B gets negotiation failed and calls
iscsi_target_login_drop()->iscsi_target_login_sess_out(). The
np->np_login_timer is canceled and initiator A' will hang forever.
Because A' is now in the login thread, no new login requests can be
serviced.
Fix this by moving iscsi_stop_login_thread_timer() out of
iscsi_target_login_sess_out(). Also remove iscsi_np parameter from
iscsi_target_login_sess_out().
Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code does not consider 'page_off' in data digest calculation. To
fix this, add a local variable 'first_sg' and set first_sg.offset to
sg->offset + page_off.
Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Christie <michael.christie@oralce.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Pull more SCSI updates from James Bottomley:
"This is the set of patches which arrived too late to stabilise in
-next for the first pull.
It's really just an lpfc driver update and an assortment of minor
fixes, all in drivers. The only core update is to the zone block
device driver, which isn't the one most people use"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Update lpfc version to 12.8.0.3
scsi: lpfc: Fix LUN loss after cable pull
scsi: lpfc: Fix validation of bsg reply lengths
scsi: lpfc: Fix retry of PRLI when status indicates its unsupported
scsi: lpfc: Fix oops when unloading driver while running mds diags
scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter
scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value
scsi: lpfc: Fix FCoE speed reporting
scsi: lpfc: Add missing misc_deregister() for lpfc_init()
scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport
scsi: scsi_transport_sas: Add spaces around binary operator "|"
scsi: sd_zbc: Improve zone revalidation
scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases
scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()
scsi: target: Make iscsit_register_transport() return void
|
|
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
|
|
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.
Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
