| Age | Commit message (Collapse) | Author |
|---|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
AMD-TEE reference count loaded TAs
* tag 'amdtee-fixes-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: amdtee: unload TA only when its refcount becomes 0
Link: https://lore.kernel.org/r/20210505110850.GA3434209@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Same Trusted Application (TA) can be loaded in multiple TEE contexts.
If it is a single instance TA, the TA should not get unloaded from AMD
Secure Processor, while it is still in use in another TEE context.
Therefore reference count TA and unload it when the count becomes zero.
Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE skip check of returned memref size
* tag 'optee-memref-size-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: do not check memref size on return from Secure World
Link: https://lore.kernel.org/r/20210330110037.GA1166563@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When Secure World returns, it may have changed the size attribute of the
memory references passed as [in/out] parameters. The GlobalPlatform TEE
Internal Core API specification does not restrict the values that this
size can take. In particular, Secure World may increase the value to be
larger than the size of the input buffer to indicate that it needs more.
Therefore, the size check in optee_from_msg_param() is incorrect and
needs to be removed. This fixes a number of failed test cases in the
GlobalPlatform TEE Initial Configuratiom Test Suite v2_0_0_0-2017_06_09
when OP-TEE is compiled without dynamic shared memory support
(CFG_CORE_DYN_SHM=n).
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
If build kernel without "O=dir", below error will be seen:
In file included from drivers/tee/optee/optee_trace.h:67,
from drivers/tee/optee/call.c:18:
./include/trace/define_trace.h:95:42: fatal error: ./optee_trace.h: No such file or directory
95 | #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
| ^
compilation terminated.
Fix it by adding below line to Makefile:
CFLAGS_call.o := -I$(src)
Tested with and without "O=dir", both can build successfully.
Fixes: 0101947dbcc3 ("tee: optee: add invoke_fn tracepoints")
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add tracepoints to retrieve information about the invoke_fn. This would
help to measure how many invoke_fn are triggered and how long it takes
to complete one invoke_fn call.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Simplify i2c acess in OP-TEE driver
* tag 'optee-simplify-i2c-access_for-v5.12' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: simplify i2c access
Link: https://lore.kernel.org/soc/20210208125853.GA288348%40jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Storing a bogus i2c_client structure on the stack adds overhead and
causes a compile-time warning:
drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=]
void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param,
Change the implementation of handle_rpc_func_cmd_i2c_transfer() to
open-code the i2c_transfer() call, which makes it easier to read
and avoids the warning.
Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Remove unnecessary need_resched() before cond_resched()
* tag 'optee-fix-cond-resched-call-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: optee: remove need_resched() before cond_resched()
tee: optee: replace might_sleep with cond_resched
Link: https://lore.kernel.org/r/20210203120953.GB3624453@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Testing need_resched() before cond_resched() is not needed as an
equivalent test is done internally in cond_resched(). So drop the
need_resched() test.
Fixes: dcb3b06d9c34 ("tee: optee: replace might_sleep with cond_resched")
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Pulls in updates in the internal headers from OP-TEE OS [1]. A few
defines has been shortened, hence the changes in rpc.c. Defines not used
by the driver in tee_rpc_cmd.h has been filtered out.
Note that this does not change the ABI.
Link: [1] https://github.com/OP-TEE/optee_os
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fix misspellings of "physical".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Use flexible-array member introduced in C99 instead of zero-length
array. Most of zero-length array was already taken care in previous
patch [1]. Now modified few more cases which were not handled earlier.
[1]. https://patchwork.kernel.org/patch/11394197/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
might_sleep() is a debugging aid and triggers rescheduling only for
certain kernel configurations. Replace with an explicit check and
reschedule to work for all kernel configurations. Fixes the following
trace:
[ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU
[ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974
[ 572.957964] (t=2100 jiffies g=10393 q=21)
[ 572.962054] NMI backtrace for cpu 0
[ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1
[ 572.971188] Hardware name: STM32 (Device Tree Support)
[ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14)
[ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8)
[ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4)
[ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130)
[ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110)
[ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88)
[ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c)
[ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8)
[ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358)
[ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc)
[ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30)
[ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240)
[ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44)
[ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0)
[ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90)
[ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
[ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40)
[ 573.119732] fce0: ffff0004 00000000
[ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000
[ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff
[ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20)
[ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44)
[ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154)
[ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190)
[ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0)
[ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c)
[ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54)
[ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0)
[ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8
[ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8
[ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8
seen on STM32 DK2 with CONFIG_PREEMPT_NONE.
Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests")
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
[jw: added fixes tag + small adjustments in the code]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
|
|
The SCMI pull request for the arm/drivers branch requires v5.10-rc2
because of dependencies with other git trees, so merge that in here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Only in smp systems the cache policy is setup as write alloc, in
single cpu systems the cache policy is set as writeback and it is
normal memory, so, it should pass the is_normal_memory check in the
share memory registration.
Add the right condition to make it work in no smp systems.
Fixes: cdbcf83d29c1 ("tee: optee: check type of registered shared memory")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
AMD-TEE driver bug fixes
AMD-TEE driver keeps track of shared memory buffers and their
corresponding buffer id's in a global linked list. These buffers are
used to share data between x86 and AMD Secure Processor. This pull
request fixes issues related to maintaining mapped buffers in a shared
linked list.
* tag 'amdtee-fixes-for-5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: amdtee: synchronize access to shm list
tee: amdtee: fix memory leak due to reset of global shm list
Link: https://lore.kernel.org/r/20201109080809.GA3862873@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Synchronize access to shm or shared memory buffer list to prevent
race conditions due to concurrent updates to shared shm list by
multiple threads.
Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The driver maintains a list of shared memory buffers along with their
mapped buffer id's in a global linked list. These buffers need to be
unmapped after use by the user-space client.
The global shared memory list is initialized to zero entries in the
function amdtee_open(). This clearing of list entries can be a source
for memory leak on secure side if the global linked list previously
held some mapped buffer entries allocated from another TEE context.
Fix potential memory leak issue by moving global shared memory list
to AMD-TEE driver context data structure.
Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Use UUID API to export the UUID
Uses export_uuid() to export and uuid_t to an u8 array instead of depending
on the internals of uuid_t.
* tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: optee: Use UUID API for exporting the UUID
Link: https://lore.kernel.org/r/20201013063612.GA3325842@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
Reenable kernel login method for kernel TEE client API
The kernel TEE login method was accidentally disabled previously when
enabling a few other login methods, so fix that here.
* tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: client UUID: Skip REE kernel login method as well
Link: https://lore.kernel.org/r/20201013070918.GA3328976@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the addition of session's client UUID generation via commit [1],
login via REE kernel method was disallowed. So fix that via passing
nill UUID in case of TEE_IOCTL_LOGIN_REE_KERNEL method as well.
Fixes: e33bcbab16d1 ("tee: add support for session's client UUID generation") [1]
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
There is export_uuid() function which exports uuid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Simplify tee_device_register() and friends
Uses cdev_device_add() instead of the cdev_add() device_add()
combination.
Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.
* tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: avoid explicit sysfs_create/delete_group by initialising dev->groups
tee: replace cdev_add + device_add with cdev_device_add
Link: https://lore.kernel.org/r/20200918144130.GB1219771@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
If the dev->groups is initialised, the sysfs group is created as part
of device_add call. There is no need to call sysfs_create/delete_group
explicitly.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Commit 233ed09d7fda ("chardev: add helper function to register char devs
with a struct device") added a helper function 'cdev_device_add'.
Make use of cdev_device_add in tee_device_register to replace cdev_add
and device_add. Since cdev_device_add takes care of setting the
kobj->parent, drop explicit initialisation in tee_device_alloc.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Make sure I2C functions used in OP-TEE are reachable with IS_REACHABLE()
* tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
drivers: optee: fix i2c build issue
Link: https://lore.kernel.org/r/20200901101806.GA3286324@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
When the optee driver is compiled into the kernel while the i2c core
is configured as a module, the i2c symbols are not available.
This commit addresses the situation by disabling the i2c support for
this use case while allowing it in all other scenarios:
i2c=y, optee=y
i2c=m, optee=m
i2c=y, optee=m
i2c=m, optee=y (not supported)
Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Converts tee subsystem to use pin_user_pages() instead of get_user_pages()
* tag 'tee-pin-user-pages-for-5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: convert get_user_pages() --> pin_user_pages()
Link: https://lore.kernel.org/r/20200825090715.GA2370775@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
Factor out a new, small release_registered_pages() function, in
order to consolidate the logic for discerning between
TEE_SHM_USER_MAPPED and TEE_SHM_KERNEL_MAPPED pages. This also
absorbs the kfree() call that is also required there.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: tee-dev@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Handle NULL pointer indication from tee client
Adds support to indicate NULL pointers instead of a valid buffer when
querying the needed size of a buffer.
* tag 'tee-memref-null-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee:
driver: tee: Handle NULL pointer indication from client
Link: https://lore.kernel.org/r/20200821102535.GA1872111@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to
control this type of cryptographic devices it needs coordinated access
to the bus, so collisions and RUNTIME_PM dont get in the way.
This trampoline driver allow OP-TEE to access them.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL"
to handle the support of the shared memory buffer with a NULL pointer.
This capability depends on TEE Capabilities and driver support.
Driver and TEE exchange capabilities at driver initialization.
Signed-off-by: Michael Whitfield <michael.whitfield@nxp.com>
Signed-off-by: Cedric Neveux <cedric.neveux@nxp.com>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU)
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
* tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tpm_ftpm_tee: register driver on TEE bus
optee: enable support for multi-stage bus enumeration
optee: use uuid for sysfs driver entry
Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Some drivers (like ftpm) can operate only after tee-supplicant
runs because of tee-supplicant provides things like storage
services (rpmb, shm). This patch splits probe of non tee-supplicant
dependable drivers to the early stage, and after tee-supplicant run
probe other drivers.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Arnd Bergmann <arnd@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
With the evolving use-cases for TEE bus, now it's required to support
multi-stage enumeration process. But using a simple index doesn't
suffice this requirement and instead leads to duplicate sysfs entries.
So instead switch to use more informative device UUID for sysfs entry
like:
/sys/bus/tee/devices/optee-ta-<uuid>
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When selecting a crypto cipher, we also need to select the
subsystem itself:
WARNING: unmet direct dependencies detected for CRYPTO_SHA1
Depends on [m]: CRYPTO [=m]
Selected by [y]:
- TEE [=y] && (HAVE_ARM_SMCCC [=n] || COMPILE_TEST [=y] || CPU_SUP_AMD [=y])
Selected by [m]:
- CRYPTO_DEV_QAT [=m] && CRYPTO [=m] && CRYPTO_HW [=y]
- CRYPTO_DEV_MEDIATEK [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && (ARM && ARCH_MEDIATEK || COMPILE_TEST [=y])
- CRYPTO_DEV_SAFEXCEL [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && (OF [=y] || PCI [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
- CRYPTO_DEV_CCREE [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && OF [=y] && HAS_DMA [=y]
- CRYPTO_DEV_SP_CCP [=y] && CRYPTO [=m] && CRYPTO_HW [=y] && CRYPTO_DEV_CCP [=y] && CRYPTO_DEV_CCP_DD [=m] && DMADEVICES [=y]
Link: https://lore.kernel.org/r/20200527133924.724819-1-arnd@arndb.de
Fixes: e33bcbab16d1 ("tee: add support for session's client UUID generation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Adds utility function in TEE subsystem for client UUID generation. This
function is also used in the optee driver.
* tag 'tee-login-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Add support for session login client UUID generation
tee: add support for session's client UUID generation
Link: https://lore.kernel.org/r/20200512131243.GA10028@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
tee: remove unnecessary NULL check in tee_shm_alloc()
* tag 'tee-smatch-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: remove unnecessary NULL check in tee_shm_alloc()
Link: https://lore.kernel.org/r/20200504181333.GA11018@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds support for client UUID generation for OP-TEE. For group based session
logins membership is verified.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
TEE Client API defines that from user space only information needed for
specified login operations is group identifier for group based logins.
REE kernel is expected to formulate trustworthy client UUID and pass that
to TEE environment. REE kernel is required to verify that provided group
identifier for group based logins matches calling processes group
memberships.
TEE specification only defines that the information passed from REE
environment to TEE environment is encoded into on UUID.
In order to guarantee trustworthiness of client UUID user space is not
allowed to freely pass client UUID.
UUIDv5 form is used encode variable amount of information needed for
different login types.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
[jw: remove unused variable application_id]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
There are use-cases where user-space shouldn't be allowed to communicate
directly with a TEE device which is dedicated to provide a specific
service for a kernel client. So add a private login method for kernel
clients and disallow user-space to open-session using GP implementation
defined login method range: (0x80000000 - 0xBFFFFFFF).
Reviewed-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Enable support to register kernel memory reference with TEE. This change
will allow TEE bus drivers to register memory references.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
