aboutsummaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2018-04-13Merge branches 'thermal-core' and 'thermal-soc' into nextZhang Rui
2018-04-02thermal: Add cooling device's statistics in sysfsViresh Kumar
This extends the sysfs interface for thermal cooling devices and exposes some pretty useful statistics. These statistics have proven to be quite useful specially while doing benchmarks related to the task scheduler, where we want to make sure that nothing has disrupted the test, specially the cooling device which may have put constraints on the CPUs. The information exposed here tells us to what extent the CPUs were constrained by the thermal framework. The write-only "reset" file is used to reset the statistics. The read-only "time_in_state_ms" file shows the time (in msec) spent by the device in the respective cooling states, and it prints one line per cooling state. The read-only "total_trans" file shows single positive integer value showing the total number of cooling state transitions the device has gone through since the time the cooling device is registered or the time when statistics were reset last. The read-only "trans_table" file shows a two dimensional matrix, where an entry <i,j> (row i, column j) represents the number of transitions from State_i to State_j. This is how the directory structure looks like for a single cooling device: $ ls -R /sys/class/thermal/cooling_device0/ /sys/class/thermal/cooling_device0/: cur_state max_state power stats subsystem type uevent /sys/class/thermal/cooling_device0/power: autosuspend_delay_ms runtime_active_time runtime_suspended_time control runtime_status /sys/class/thermal/cooling_device0/stats: reset time_in_state_ms total_trans trans_table This is tested on ARM 64-bit Hisilicon hikey620 board running Ubuntu and ARM 64-bit Hisilicon hikey960 board running Android. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-03-14thermal: imx: Fix race condition in imx_thermal_probe()Mikhail Lappo
When device boots with T > T_trip_1 and requests interrupt, the race condition takes place. The interrupt comes before THERMAL_DEVICE_ENABLED is set. This leads to an attempt to reading sensor value from irq and disabling the sensor, based on the data->mode field, which expected to be THERMAL_DEVICE_ENABLED, but still stays as THERMAL_DEVICE_DISABLED. Afher this issue sensor is never re-enabled, as the driver state is wrong. Fix this problem by setting the 'data' members prior to requesting the interrupts. Fixes: 37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling") Cc: <stable@vger.kernel.org> Signed-off-by: Mikhail Lappo <mikhail.lappo@esrlabs.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-02-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - fix a race condition issue in power allocator governor (Yi Zeng). - add support for AP806 and CP110 in armada thermal driver, together with several improvements (Baruch Siach, Miquel Raynal) - add support for r8z7743 in rcar thermal driver (Biju Das) - convert thermal core to use new hwmon API to avoid warning (Fabio Estevam) - small fixes and cleanups in thermal core and x86_pkg_thermal, int3400_thermal, hisi_thermal, mtk_thermal and imx_thermal drivers (Pravin Shedge, Geert Uytterhoeven, Alexey Khoroshilov, Brian Bian, Matthias Brugger, Nicolin Chen, Uwe Kleine-König) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: thermal_hwmon: Convert to hwmon_device_register_with_info() thermal/x86 pkg temp: Remove debugfs_create_u32() casts thermal: int3400_thermal: fix error handling in int3400_thermal_probe() thermal/drivers/hisi: Remove bogus const from function return type thermal: armada: Give meaningful names to the thermal zones thermal: armada: Wait sensors validity before exiting the init callback thermal: armada: Change sensors trim default value thermal: armada: Update Kconfig and module description thermal: armada: Add support for Armada CP110 thermal: armada: Add support for Armada AP806 thermal: armada: Use real status register name thermal: armada: Clarify control registers accesses thermal: armada: Simplify the check of the validity bit thermal: armada: Use msleep for long delays dt-bindings: thermal: Describe Armada AP806 and CP110 dt-bindings: thermal: rcar: Add device tree support for r8a7743 thermal: mtk: Cleanup unused defines thermal: imx: update to new formula according to NXP AN5215 thermal: imx: use consistent style to write temperatures thermal: imx: improve comments describing algorithm for temp calculation ...
2018-02-01Merge tag 'driver-core-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...
2018-01-15Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui
2018-01-15thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()Fabio Estevam
Booting Linux on a mx6q based board leads to the following warning: (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). , so do the conversion as suggested. Also, this results in the core taking care of creating the 'name' attribute, so drop the code doing that from the thermal driver. The initial attempt to convert this driver to hwmon_device_register_with_info() caused issues on the N900 platform in commit 7611fb68062f ("thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"): bq27xxx-battery 2-0055: failed to register battery bq27xxx-battery: probe of 2-0055 failed with error -22 ... rx51-battery: probe of n900-battery failed with error -22 , leading to a revert in commit 3feb479cea37 ("Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()""). The probe errors happened due to the '-' character being present in the name of the power supply devices: bq27200-0 and rx51-battery. Since commit 74d3b6419772 ("hwmon: Relax name attribute validation for new APIs") hwmon will no longer treat these names as errors, allowing the transition for hwmon_device_register_with_info() to happen in a safely manner. Cc: Pavel Machek <pavel@ucw.cz> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-01-13thermal/x86 pkg temp: Remove debugfs_create_u32() castsGeert Uytterhoeven
When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-01-13thermal: int3400_thermal: fix error handling in int3400_thermal_probe()Alexey Khoroshilov
There are resources that are not dealocated on failure path in int3400_thermal_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-01-09treewide: Use DEVICE_ATTR_WOJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)\)?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02thermal/drivers/hisi: Remove bogus const from function return typeGeert Uytterhoeven
With gcc-4.1.2: drivers/thermal/hisi_thermal.c: In function ‘hisi_thermal_probe’: drivers/thermal/hisi_thermal.c:530: warning: type qualifiers ignored on function return type Remove the "const" keyword to fix this. Fixes: a160a465297362c5 ("thermal/drivers/hisi: Prepare to add support for other hisi platforms") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Give meaningful names to the thermal zonesMiquel Raynal
After registration to the thermal core, sysfs will make one entry per instance of the driver in /sys/class/thermal_zoneX and /sys/class/hwmon/hwmonX, X being the index of the instance, all of them having the type/name "armada_thermal". Until now there was only one thermal zone per SoC but SoCs like Armada A7K and Armada A8K have respectively two and three thermal zones (one per AP and one per CP) and this number is subject to grow in the future. Use dev_name() instead of the "armada_thermal" string to get a meaningful name and be able to identify the thermal zones from userspace. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Wait sensors validity before exiting the init callbackMiquel Raynal
The thermal core will check for sensors validity right after the initialization callback has returned. As the initialization routine make a reset, the sensors are not ready immediately and the core spawns an error in the dmesg. Avoid this annoying situation by polling on the validity bit before exiting from these routines. This also avoid the use of blind sleeps. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Change sensors trim default valueMiquel Raynal
Errata #132698 highlights an error in the default value of Tc trim. Set this parameter to b'011. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Update Kconfig and module descriptionMiquel Raynal
Update Armada thermal driver Kconfig entry as well as the driver's MODULE_DESCRIPTION content, now that 64-bit SoCs are also supported, eg. Armada 7K and Armada 8K. Use the generic term "Marvell EBU Armada SoCs" instead of listing all the supported SoCs everywhere (excepted in the Kconfig description, where it is useful to have a list). Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Add support for Armada CP110Baruch Siach
The CP110 component is integrated in the Armada 8k and 7k lines of processors. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [<miquel.raynal@free-electrons.com>: renamed the register pointers as well as some definitions related to the new register names and simplified the init sequence for Armada 380] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Add support for Armada AP806Baruch Siach
The AP806 component is integrated in the Armada 8K and 7K lines of processors. The thermal sensor sample field on the status register is a signed value. Extend armada_get_temp() and the driver structure to handle signed values. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [<miquel.raynal@free-electrons.com>: Changes when applying over the previous patches, including the register names changes, also switched the coefficients values to s64 instead of unsigned long to deal with negative values and used do_div instead of the traditionnal '/'] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Use real status register nameMiquel Raynal
Three 32-bit registers are used to drive the thermal IP: control0, control1 and status. The two control registers share the same name both in the documentation and in the code, while the latter is referred as "sensor" in the code. Rename this pointer to be called "status" in order to be aligned with the documentation. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Clarify control registers accessesMiquel Raynal
Bindings were incomplete for a long time by only exposing one of the two available control registers. To ease the migration to the full bindings (already in use for the Armada 375 SoC), rename the pointers for clarification. This way, it will only be needed to add another pointer to access the other control register when the time comes. This avoids dangerous situations where the offset 0 of the control area can be either one register or the other depending on the bindings used. After this change, device trees of other SoCs could be migrated to the "full" bindings if they may benefit from features from the unaccessible register, without any change in the driver. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Simplify the check of the validity bitMiquel Raynal
All Armada SoCs use one bit to declare if the sensor values are valid. This bit moves across the versions of the IP. The method until then was to do both a shift and compare with an useless flag of "0x1". It is clearer and quicker to directly save the value that must be ANDed instead of the bit position and do a single bitwise AND operation. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Use msleep for long delaysBaruch Siach
Use msleep for long (> 10ms) delays, instead of the busy waiting mdelay. All delays are called from the probe routine, where scheduling is allowed. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: mtk: Cleanup unused definesMatthias Brugger
The mtk_thermal has some defiens which are never used within the driver. This patch delets them. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: imx: update to new formula according to NXP AN5215Uwe Kleine-König
According to an application note from 03/2017 there is an updated formula to calculate the temperature that better matches reality. This is implemented here. While updating move the magic constants from cpp defines which are far above the explaining formula to constants in the code just under the explaining comment. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: imx: use consistent style to write temperaturesUwe Kleine-König
The previous commit already took care to use the right notation for temperatures. Add correct units to all values representing temperatures in the right notation for the rest of the file. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: imx: improve comments describing algorithm for temp calculationUwe Kleine-König
The description of the implemented algorithm is hardly understandable without having the right application note side-by-side to the code. Fix this by using shorter and more intuitive variable names, describe their meaning and transform a single formula instead of first talking about slope and then about "milli_Tmeas". There are no code changes. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: imx: Use better parameter names than "val"Uwe Kleine-König
The values passed to imx_init_calib() and imx_init_temp_grade() are read from specific OCOTP values. Use their names (in lower case) as parameter name instead of "val" to make the code easier to understand. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: tegra: remove forward declarationsNicolin Chen
This patch just simply moves tegra_thermctl_set_trip_temp() behind those function implementations so that it can remove those forward declarations. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-12-27thermal: int3400_thermal: Ignore Unknown Notification CodesBrian Bian
Some BIOS implementations route ACPI codes other than 0x83 to INT3400 device. Ignore these ACPI notification codes because the INT3400 driver does not handle them. Signed-off-by: Brian Bian <brian.bian@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-12-27thermal: power_allocator: fix one race condition issue for thermal_instances ↵Yi Zeng
list When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by: Yi Zeng <yizeng@asrmicro.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-12-27drivers: thermal: remove duplicate includesPravin Shedge
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-12-07cpu_cooling: Drop static-power related stuffViresh Kumar
No one has used it for the last two and half years (since it was introduced by commit c36cf0717631 (thermal: cpu_cooling: implement the power cooling device API), get rid of it. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-07cpu_cooling: Keep only one of_cpufreq*cooling_register() helperViresh Kumar
of_cpufreq_cooling_register() isn't used by anyone and so can be removed, but then we would be left with two routines: cpufreq_cooling_register() and of_cpufreq_power_cooling_register() that would look odd. Remove current implementation of of_cpufreq_cooling_register() and rename of_cpufreq_power_cooling_register() as of_cpufreq_cooling_register(). This simplifies lots of stuff. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-07cpu_cooling: Remove unused cpufreq_power_cooling_register()Viresh Kumar
It isn't used by anyone, drop it. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-07cpu_cooling: Make of_cpufreq_power_cooling_register() parse DTViresh Kumar
All the callers of of_cpufreq_power_cooling_register() have almost identical code and it makes more sense to move that code into the helper as its all about reading DT properties. This got rid of lot of redundant code. Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - introduce brcmstb AVS TMON thermal driver (Brian Norris) - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao) - major rework on HISI driver plus additional support of hisi3660 (Daniel Lezcano) - add nvmem-cells binding on imx6sx (Leonard Crestez) - fix a NULL pointer dereference on ti thermal driver unloading (Tony Lindgren) - improve tmon tool to make it easier to cross-compile tmon (Markus Mayer) - add Coffee Lake and Cannon Lake support for intel processor and pch thermal drivers (Srinivas Pandruvada) - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits) thermal: pch: Add Cannon Lake support thermal: int340x: processor_thermal: Add Coffee Lake support thermal: int340x: processor_thermal: Add Cannon Lake support thermal: bxt: remove redundant variable trip thermal: cpu_cooling: pr_err() strings should end with newlines thermal: add brcmstb AVS TMON driver Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal/drivers/hisi: Add support for hi3660 SoC thermal/drivers/hisi: Prepare to add support for other hisi platforms thermal/drivers/hisi: Add platform prefix to function name thermal/drivers/hisi: Put platform code together thermal/drivers/qcom-spmi: Use devm_iio_channel_get thermal/drivers/generic-iio-adc: Switch tz request to devm version thermal/drivers/step_wise: Fix temperature regulation misbehavior thermal/drivers/hisi: Use round up step value thermal/drivers/hisi: Move the clk setup in the corresponding functions thermal/drivers/hisi: Remove mutex_lock in the code thermal/drivers/hisi: Remove thermal data back pointer thermal/drivers/hisi: Convert long to int thermal/drivers/hisi: Rename and remove unused field ...
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge branches 'thermal-core', 'thermal-tool', 'thermal-intel' and ↵Zhang Rui
'thermal-soc' into next
2017-11-02Merge branch 'imx-nvmem' into thermal-socZhang Rui
2017-11-02thermal: pch: Add Cannon Lake supportSrinivas Pandruvada
Added Cannon Lake PCH ids. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-11-02thermal: int340x: processor_thermal: Add Coffee Lake supportSrinivas Pandruvada
Add new PCI id for Coffee lake processor thermal device. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-11-02thermal: int340x: processor_thermal: Add Cannon Lake supportSrinivas Pandruvada
Added PCI-ID of Cannon Lake thermal device. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-11-02thermal: bxt: remove redundant variable tripColin Ian King
Variable trip is assigned but never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/thermal/intel_bxt_pmic_thermal.c:204:4: warning: Value stored to 'trip' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-10-31thermal: cpu_cooling: pr_err() strings should end with newlinesArvind Yadav
pr_err() messages should end with a new-line to avoid other messages being concatenated. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Javi Merino <javi.merino@kernel.org> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31thermal: add brcmstb AVS TMON driverBrian Norris
The AVS TMON core provides temperature readings, a pair of configurable high- and low-temperature threshold interrupts, and an emergency over-temperature chip reset. The driver utilizes the first two to provide temperature readings and high-temperature notifications to applications. The over-temperature reset is not exposed to applications; this reset threshold is critical to the system and should be set with care within the bootloader. Applications may choose to utilize the notification mechanism, the temperature reading mechanism (e.g., through polling), or both. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31thermal/drivers/hisi: Add support for hi3660 SoCKevin Wangtao
This patch adds the support for thermal sensor on the Hi3660 SoC. Hi3660 tsensor support alarm in alarm threshold, it also has a configurable hysteresis interval, interrupt will be triggered when temperature rise above the alarm threshold or fall below the hysteresis threshold. Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31thermal/drivers/hisi: Prepare to add support for other hisi platformsKevin Wangtao
For platform compatibility, add the tsensor ops to a thermal data structure. Each platform has its own probe function to register proper tsensor ops function to the pointer, platform related resource request are also implemented in the platform probe function. Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31thermal/drivers/hisi: Add platform prefix to function nameKevin Wangtao
As the next patches will provide support for the hikey3660's sensor, several functions with the same purpose but for different platforms will be introduced. In order to make a clear distinction between them, let's prefix the function names with the platform name. This patch has no functional changes, only name changes. Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 05:27:01 +0000