aboutsummaryrefslogtreecommitdiff
path: root/drivers/uio
AgeCommit message (Collapse)Author
2017-04-08uio_mf624: Align memory regions to page size and set correct offsetsMichal Sojka
mf624 card has its registers not aligned to pages. Since commit b65502879556 ("uio: we cannot mmap unaligned page contents") mmap()ing mf624 registers fails, because now the uio drivers must set uio_mem->addr to be page-aligned. We align the address here and set the newly introduced offs field to the offset of the mf264 registers within the page so that userspace can find the address of the mmap()ed register by reading /sys/class/uio/uio?/maps/map?/offset. Tested with real mf624 card. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08uio_mf624: Refactor memory info initializationMichal Sojka
No functional changes. Move initialization of struct uio_mem to a function. This will allow the next commit to change the initialization code at a single place rather that at three different places. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08uio: Allow handling of non page-aligned memory regionsMichal Sojka
Since commit b65502879556 ("uio: we cannot mmap unaligned page contents") addresses and sizes of UIO memory regions must be page-aligned. If the address in the BAR register is not page-aligned (which is the case of the mf264 card), the mentioned commit forces the UIO driver to round the address down to the page size. Then, there is no easy way for user-space to learn the offset of the actual memory region within the page, because the offset seen in /sys/class/uio/uio?/maps/map?/offset is calculated from the rounded address and thus it is always zero. Fix that problem by including the offset in struct uio_mem. UIO drivers can set this field and userspace can read its value from /sys/class/uio/uio?/maps/map?/offset. The following commits update the uio_mf264 driver to set this new offs field. Drivers for hardware with page-aligned BARs need not to be modified provided that they initialize struct uio_info (which contains uio_mem) with zeros. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-14vmbus: add direct isr callback modeStephen Hemminger
Change the simple boolean batched_reading into a tri-value. For future NAPI support in netvsc driver, the callback needs to occur directly in interrupt handler. Batched mode is also changed to disable host interrupts immediately in interrupt routine (to avoid unnecessary host signals), and the tasklet is rescheduled if more data is detected. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-10uio-hv-generic: store physical addresses instead of virtualArnd Bergmann
gcc warns about the newly added driver when phys_addr_t is wider than a pointer: drivers/uio/uio_hv_generic.c: In function 'hv_uio_mmap': drivers/uio/uio_hv_generic.c:71:17: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] virt_to_phys((void *)info->mem[mi].addr) >> PAGE_SHIFT, drivers/uio/uio_hv_generic.c: In function 'hv_uio_probe': drivers/uio/uio_hv_generic.c:140:5: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] = (phys_addr_t)dev->channel->ringbuffer_pages; drivers/uio/uio_hv_generic.c:147:3: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (phys_addr_t)vmbus_connection.int_page; drivers/uio/uio_hv_generic.c:153:3: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (phys_addr_t)vmbus_connection.monitor_pages[1]; I can't see why we store a virtual address in a phys_addr_t here, as the only user of that variable converts it into a physical address anyway, so this moves the conversion to where it logically fits according to the types. Fixes: 95096f2fbd10 ("uio-hv-generic: new userspace i/o driver for VMBus") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06uio-hv-generic: new userspace i/o driver for VMBusStephen Hemminger
This is a new driver to enable userspace networking on VMBus. It is based largely on the similar driver that already exists for PCI, and earlier work done by Brocade to support DPDK. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29uio: pruss: add clk_disable()Alexey Khoroshilov
pruss_probe() enables gdev->pruss_clk, but there is no clk_disable() in the driver. The patch adds clk_disable() to pruss_cleanup() and error handling for clk_enable(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31uio: fix dmem_region_start computationJan Viktorin
The variable i contains a total number of resources (including IORESOURCE_IRQ). However, we want the dmem_region_start to point after the last resource of type IORESOURCE_MEM. The original behaviour leads (very likely) to skipping several UIO mapping regions and makes them useless. Fix this by computing dmem_region_start from the uiomem which points to the last used UIO mapping. Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation") Signed-off-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01uio: add missing error codesDan Carpenter
My static checker complains that "ret" could be uninitialized at the end, which is true but it's more likely that it would be set to zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04uio: fix false positive __might_sleep warning splatMichal Hocko
Andy has reported a __might_sleep warning [ 5174.883617] WARNING: CPU: 0 PID: 1532 at /home/agrover/git/kernel/kernel/sched/core.c:7389 __might_sleep+0x7d/0x90() [ 5174.884407] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa02a5821>] uio_read+0x91/0x170 [uio] [ 5174.885198] Modules linked in: tcm_loop target_core_user uio target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod uinput fuse nfsv3 nfs_acl nfs lockd grace fscache sunrpc microcode i2c_piix4 virtio_balloon i2c_core xfs libcrc32c crc32c_intel virtio_net virtio_blk [ 5174.887351] CPU: 0 PID: 1532 Comm: tcmu-runner Not tainted 4.2.0-rc7+ [ 5174.887853] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 5174.888633] ffffffff81a3b870 ffff880045393ca8 ffffffff817afaae 0000000000000000 [ 5174.889224] ffff880045393cf8 ffff880045393ce8 ffffffff8109a846 ffff880045393cd8 [ 5174.889793] ffffffffa02a7150 00000000000002dc 0000000000000000 ffff880045008000 [ 5174.890375] Call Trace: [ 5174.890562] [<ffffffff817afaae>] dump_stack+0x4c/0x65 [ 5174.890938] [<ffffffff8109a846>] warn_slowpath_common+0x86/0xc0 [ 5174.891388] [<ffffffff8109a8c6>] warn_slowpath_fmt+0x46/0x50 [ 5174.891808] [<ffffffffa02a5821>] ? uio_read+0x91/0x170 [uio] [ 5174.892237] [<ffffffffa02a5821>] ? uio_read+0x91/0x170 [uio] [ 5174.892653] [<ffffffff810c584d>] __might_sleep+0x7d/0x90 [ 5174.893055] [<ffffffff811ea023>] __might_fault+0x43/0xa0 [ 5174.893448] [<ffffffff817b31ce>] ? schedule+0x3e/0x90 [ 5174.893820] [<ffffffffa02a58c2>] uio_read+0x132/0x170 [uio] [ 5174.894240] [<ffffffff810cbb80>] ? wake_up_q+0x70/0x70 [ 5174.894620] [<ffffffff81236168>] __vfs_read+0x28/0xe0 [ 5174.894993] [<ffffffff81353233>] ? security_file_permission+0xa3/0xc0 [ 5174.895541] [<ffffffff8123678f>] ? rw_verify_area+0x4f/0xf0 [ 5174.896006] [<ffffffff812368ba>] vfs_read+0x8a/0x140 [ 5174.896391] [<ffffffff817b28f5>] ? __schedule+0x425/0xcc0 [ 5174.896788] [<ffffffff812375d9>] SyS_read+0x49/0xb0 The warning is a false positive because uio_read doesn't depent on TASK_INTERRUPTIBLE after copy_to_user so it is safe to silence the warning by an explicit setting the state to TASK_RUNNING in the path which might call into TASK_RUNNING. Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04uio: uio_fsl_elbc_gpcm: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05uio: UIO_PRUSS should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/uio/uio_pruss.ko] undefined! ERROR: "dma_free_coherent" [drivers/uio/uio_pruss.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05uio: uio_fsl_elbc_gpcm: Use module_platform_driverVaishali Thakkar
Use module_platform_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @a@ identifier f, x; @@ -static f(...) { return platform_driver_register(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { platform_driver_unregister(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_platform_driver; @@ -module_exit(e); +module_platform_driver(x); Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05uio: Destroy uio_idr on module exitJohannes Thumshirn
Destroy uio_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from configMatwey V. Kornilov
mach-dependant stuff has been removed by 2eb2478d471e ("uio: uio_pruss: replace private SRAM API with genalloc") There is no need to keep depends on ARCH_DAVINCI_DA850 Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12uio: pruss: Add CONFIG_HAS_IOMEM dependenceMatwey V. Kornilov
uio_pruss uses io memory, that should be explicitly depend on it Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12uio: pruss: Include <linux/sizes.h>Matwey V. Kornilov
uio_pruss references SZ_16K and SZ_256K defines, but linux/sizes.h is not included. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24uio: don't free irq that was not requestedStephen Hemminger
UIO base driver should only free_irq that it has requested. UIO supports drivers without interrupts (irq == 0) or custom handlers. This fixes warnings like: WARNING: CPU: 1 PID: 5478 at kernel/irq/manage.c:1244 __free_irq+0xa9/0x1e0() Trying to free already-free IRQ 0 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03Revert "uio: constify of_device_id array"Greg Kroah-Hartman
This reverts commit 4d8beff2ae07fad85d723b4cdf704b05f0ed4794. It causes build warnings, and it's incorrect as we do write to this structure. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25uio: constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-20uio: Request/free irq separate from dev lifecycleBrian Russell
Separate irq request/free from the device lifecycle. After device unregister the parent module can call pci_disable_msi. >From the PCI MSI how to: "Before calling this function, a device driver must always call free_irq() on any interrupt for which it previously called request_irq(). Failure to do so results in a BUG_ON(), leaving the device with MSI enabled and thus leaking its vector." So we need to separately free the irq at unregister to allow the device to be kept around in the case of it still having open FDs. Signed-off-by: Brian Russell <brussell@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12uio: uio_fsl_elbc_gpcm: new driverJohn Ogness
This driver provides UIO access to memory of a peripheral connected to the Freescale enhanced local bus controller (eLBC) interface using the general purpose chip-select mode (GPCM). Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12uio/uio_pci_generic: don't return zero on failure path in probe()Alexey Khoroshilov
If uio_register_device() fails in probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code propagation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-14Merge tag 'char-misc-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
2014-11-07uio: support memory sizes larger than 32 bitsCristian Stoica
This is a completion to 27a90700a4275c5178b883b65927affdafa5185c The size field is also increased to allow values larger than 32 bits on platforms that have more than 32 bit physical addresses. Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-20uio: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-02uio: Export definition of struct uio_deviceAndy Grover
In order to prevent a O(n) search of the filesystem to link up its uio node with its target configuration, TCMU needs to know the minor number that UIO assigned. Expose the definition of this struct so TCMU can access this field. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-07-13Merge 3.16-rc5 into char-misc-nextGreg Kroah-Hartman
This resolves a number of merge issues with changes in this tree and Linus's tree at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09uio: uio_pruss: use struct deviceAndre Heider
Get rid of the repeating &dev->dev constructs and prevent introducing new ones. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-17Revert "uio: fix vma io range check in mmap"Greg Kroah-Hartman
This reverts commit ddb09754e6c7239e302c7b675df9bbd415f8de5d. Linus objected to this originally, I can see why it might be needed, but given that no one spoke up defending this patch, I'm going to revert it. If you have hardware that requires this change, please speak up in the future and defend the patch. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Bin Wang <binw@marvell.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Norbert Ciosek <norbertciosek@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27uio: fix vma io range check in mmapBin Wang
the vma range size is always page size aligned in mmap, while the real io space range may not be page aligned, thus leading to range check failure in the uio_mmap_physical(). for example, in a case of io range size "mem->size == 1KB", and we have (vma->vm_end - vma->vm_start) == 4KB, due to "len" is aligned to page size in do_mmap_pgoff(). now fix this issue by align mem->size to page size in the check. Signed-off-by: Bin Wang <binw@marvell.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()Daeseok Youn
When platform_get_irq() is failed after "priv" allocated, it need to free "priv". But the label of bad0 doesn't try to free about "priv". So this patch changes that lable to "bad1". But "bad1" has pm_runtime_disable() call, this function should be called when uio_register_device() is failed. So it is moved into handling error for uio_register_device(). Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20uio: fix devm_request_irq usageAaro Koskinen
Commit e6789cd3dfb553077606ccafeb05e0043f072481 (uio: Simplify uio error path by using devres functions) converted uio to use devm_request_irq(). This introduced a change in behaviour since the IRQ is associated with the parent device instead of the created UIO device. The IRQ will remain active after uio_unregister_device() is called, and some drivers will crash because of this. The patch fixes this. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-16Merge 3.13-rc4 into char-misc-nextGreg Kroah-Hartman
We want these fixes in here.
2013-12-08uio: uio_mf624: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02uio: we cannot mmap unaligned page contentsLinus Torvalds
In commit 7314e613d5ff ("Fix a few incorrectly checked [io_]remap_pfn_range() calls") the uio driver started more properly checking the passed-in user mapping arguments against the size of the actual uio driver data. That in turn exposed that some driver authors apparently didn't realize that mmap can only work on a page granularity, and had tried to use it with smaller mappings, with the new size check catching that out. So since it's not just the user mmap() arguments that can be confused, make the uio mmap code also verify that the uio driver has the memory allocated at page boundaries in order for mmap to work. If the device memory isn't properly aligned, we return [ENODEV] The fildes argument refers to a file whose type is not supported by mmap(). as per the open group documentation on mmap. Reported-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/uio/uio_pruss.c: use gen_pool_dma_alloc() to allocate sram memoryNicolin Chen
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code. Signed-off-by: Nicolin Chen <b42378@freescale.com> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-07Merge tag 'char-misc-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here's the big char/misc driver patchset for 3.13-rc1. Lots of stuff in here, including some new drivers for Intel's "MIC" co-processor devices, and a new eeprom driver. Other things include the driver attribute cleanups, extcon driver updates, hyperv updates, and a raft of other miscellaneous driver fixes. All of these have been in linux-next for a while" * tag 'char-misc-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (121 commits) misc: mic: Fixes for randconfig build errors and warnings. tifm: fix error return code in tifm_7xx1_probe() w1-gpio: Use devm_* functions w1-gpio: Detect of_gpio_error for first gpio uio: Pass pointers to virt_to_page(), not integers uio: fix memory leak misc/at24: avoid infinite loop on write() misc/93xx46: avoid infinite loop on write() misc: atmel_pwm: add deferred-probing support mei: wd: host_init propagate error codes from called functions mei: replace stray pr_debug with dev_dbg mei: bus: propagate error code returned by mei_me_cl_by_id mei: mei_cl_link remove duplicated check for open_handle_count mei: print correct device state during unexpected reset mei: nfc: fix memory leak in error path lkdtm: add tests for additional page permissions lkdtm: adjust recursion size to avoid warnings lkdtm: isolate stack corruption test mei: move host_clients_map cleanup to device init mei: me: downgrade two errors to debug level ...
2013-10-29uio: Pass pointers to virt_to_page(), not integersBen Hutchings
Most architectures define virt_to_page() as a macro that casts its argument such that an argument of type unsigned long will be accepted without complaint. However, the proper type is void *, and passing unsigned long results in a warning on MIPS. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29uio: fix memory leakCong Ding
we have to call kobject_put() to clean up the kobject after function kobject_init(), kobject_add(), or kobject_uevent() is called. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29Fix a few incorrectly checked [io_]remap_pfn_range() callsLinus Torvalds
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde <nico@ngolde.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.
2013-09-26uio: uio_sercos3: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26uio: uio_netx: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26uio: uio_mf624: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26uio: uio_cif: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26uio: uio_aec: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26uio: Simplify uio error path by using devres functionsMichal Simek
Using devres functions simplify driver error path. - Use devm_kzalloc - Use devm_request_irq Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 19:51:42 +0000