aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2007-02-07USB: add binary API to usbmonPete Zaitcev
This patch adds a new, "binary" API in addition to the old, text API usbmon had before. The new API allows for less CPU use, and it allows to capture all data from a packet where old API only captured 32 bytes at most. There are some limitations and conditions to this, e.g. in case someone constructs a URB with 1GB of data, it's not likely to be captured, because even the huge buffers of the new reader are finite. Nonetheless, I expect this new capability to capture all data for all real life scenarios. The downside is, a special user mode application is required where cat(1) worked before. I have sample code at http://people.redhat.com/zaitcev/linux/ and Paolo Abeni is working on patching libpcap. This patch was initially written by Paolo and later I tweaked it, and we had a little back-and-forth. So this is a jointly authored patch, but I am submitting this I am responsible for the bugs. Signed-off-by: Paolo Abeni <paolo.abeni@email.it> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB Gadget file_storage.c: remove unnecessary castsJohn Daiker
Went looking through some usb stuff and found some unnecessary casts in file_storage.c This is part of the KernelJanitors TODO list. Signed-off-by: John Daiker <daikerjohn@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Bugfix for aircable: Add module and name to usb_serial_driverJohannes Hölzl
While adding the dynamic-id support to usb serial I found a small bug in the air cable driver: Adds module and name information to the usb_serial_driver instance of aircable. So the aircable driver is correctly shown under /sys/bus/usb-serial/drivers/aircable and has the module link. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add driver pointer to all usb-serial driversJohannes Hölzl
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add dynamic id support to usb-serial coreGreg Kroah-Hartman
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2007-02-07ohci: Add support for OHCI controller on the of_platform busSylvain Munaut
PPC embedded systems can have a ohci controller builtin. In the new model, it will end up as a driver on the of_platform bus, this patches takes care of them. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07ohci: Rework bus glue integration to allow several at onceSylvain Munaut
The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07rndis_host learns ActiveSync basicsOle Andre Vadla Ravnas
Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: ethernet gadget interop with MCCI Windows driverDavid Brownell
It turns out that minor tweaks to the "CDC Subset" support in the Ethernet gadget driver, just updating a config descriptor, let it be automagically recognized by a Windows driver supported by MCCI. This patch adds those descriptors, so systems using PXA 255 processors (like Gumstix etc) can interop with those commercial MS-Windows drivers. This is a Good Thing since Microsoft's RNDIS code has bugginess issues, which are unfortunately compounded by "won't fix" issues as well as "the published specs are incomplete and wrong" issues. Being able to talk to the MCCI driver gives Windows users another connectivity option. (MCCI also has CDC Ethernet drivers, which can help most non-PXA processors.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07usbcore: remove unneeded error checkAlan Stern
This patch (as830) removes some unnecessary error checking. According to the kerneldoc, schedule_work() can't fail. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: indicate active altsetting in proc/bus/usb/devices fileDavid Brownell
Update /proc/bus/usb/devices output to report active altsettings. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: devio.c add missing INIT_LIST_HEAD()Dan Carpenter
It should hopefully fix the list corruption bug on: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=214402 Add a missing INIT_LIST_HEAD() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: mutexification of rio500Oliver Neukum
this makes the rio500 misc usb driver use mutexes and turns uninterruptible sleep into interruptible sleep where the semantics are not affected. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Remove unneeded void * casts in idmouse.cTobias Klauser
The patch removes unneeded void * casts for the following (void *) pointers: - struct file: private_data The patch also contains some whitespace and coding style cleanups in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>David Brownell
This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Fix EHCI warningBenjamin Herrenschmidt
This patch fixes a warning introduced by the big endian MMIO EHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-02-07USB: Fix OHCI warningBenjamin Herrenschmidt
This patch fixes a warning introduces by the split endian OHCI support patch on platforms that don't have readl_be/writel_be variants (though mostly harmless as those are called in an if (0) statement, but gcc still warns). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Implement support for EHCI with big endian MMIOBenjamin Herrenschmidt
This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Implement support for "split" endian OHCIBenjamin Herrenschmidt
This patch separates support for big endian MMIO register access and big endian descriptors in order to support the Toshiba SCC implementation which has big endian registers but little endian in-memory descriptors. It simplifies the access functions a bit in ohci.h while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Rework the OHCI quirk mecanism as suggested by DavidBenjamin Herrenschmidt
This patch applies David Brownell's suggestion for reworking the OHCI quirk mechanism via a table of PCI IDs. It adapts the existing quirks to use that mechanism. This also moves the quirks to reset() as suggested by the comment in there. This is necessary as we need to have the endian properly set before we try to init the controller. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: convert usb class devices to real devicesGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: move usb_device_class class devices to be real devicesGreg Kroah-Hartman
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: add EPIC support to the io_edgeport driverGreg Kroah-Hartman
This patch adds EPiC support to the io_edgeport driver which adds support for a number of NCR printers: - NCR (Axiohm) 7401-K580 printer - NCR (TEC) 7401-K590 printer, 7402-K592 - NCR (TEC) 7167, 7168 printers - NCR (TEC) 7197, 7198, F306, F307, F309 printers - NCR (Axiohm) 7194 printer - NCR (Axiohm) 7158 printer and a few more. It is based on the 2.6.19 kernel. Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2007-02-07USB: unusual_devs.h for Sony floppyLuiz Fernando N. Capitulino
This patch increases the range for 0x054c:0x002c devices to make the following Sony USB floppy to work: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=002c Rev=20.00 S: Manufacturer=SONY S: Product=USB Floppy C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=usb-storage E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=127ms Signed-off-by: Marcelo Ricardo Leitner <mrl@mandriva.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-05USB HID: handle multi-interface devices for Apple macbook pro properlySoeren Sonnenburg
Some HID devices by Apple have both keyboard and mouse interfaces; the keyboard interface is handled by usbhid, but the mouse (really touchpad) interface must be handled by the separate 'appletouch' driver. Using HID_QUIRK_IGNORE will make hiddev ignore both interfaces, therefore a new quirk flag to ignore only the mouse interface is required. Signed-off-by: Soeren Sonnenburg <kernel@nn7.de> Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05USB HID: fix bogus comment in hid_get_class_descriptor()Jiri Kosina
The comment in hid_get_class_descriptor() says a very obvious thing and is also violating codingstyle. Just remove it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05USB HID: remove hid_find_field_by_usage()Jiri Kosina
The unused hid_find_field_by_usage() function has been commented out for a pretty long time. Remove it completely. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05HID: API - fix leftovers of hidinput API in USB HIDJiri Kosina
hidinput_{open,close}() functions do not belong to usbhid, but to the generic HID layer. Move them, and fix hooks in struct hid_device, so that now the callbacks are done to transport-specific _open() functions, but not input_open() functions. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05HID: hid debug from hid-debug.h to hid layerJiri Kosina
hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05hid: force feedback driver for PantherLord USB/PS2 2in1 AdapterAnssi Hannula
Add a force feedback driver for PantherLord USB/PS2 2in1 Adapter, 0810:0001. The device identifies itself as "Twin USB Joystick". Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05hid: quirk for multi-input devices with unneeded output reportsAnssi Hannula
Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports when enumerating reports on a hid-input device. Add this quirk and HID_QUIRK_MULTI_INPUT to 0810:0001. PantherLord Twin USB Joystick, 0810:0001 has separate input reports for 2 distinct game controllers in the same interface, so it needs HID_QUIRK_MULTI_INPUT. However, the device also contains one output report per controller which is used to control the force feedback function, and we do not want those to appear as separate input devices as well. The simplest approach seems to be to add a quirk to skip output reports on 0810:0001, and allow the force feedback driver to handle those. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05hid: allow force feedback for multi-input devicesAnssi Hannula
Allow hid devices with HID_QUIRK_MULTI_INPUT to have force feedback. This was previously disabled because there were not any force feedback drivers for such devices. This will change with my upcoming patch. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-03[PATCH] fix rtl8150Al Viro
That code doesn't do what its author apparently thought it would do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-30HID: fix pb_fnmode and move it to generic HIDJiri Kosina
The apple powerbook people are used to switch the pb_fnmode setting at runtime through writing to sysfs, altering the module parameter value. This was broken for them in 2.6.20-rc1 when generic HID layer was introduced, as the pb_fnmode flag was made per-hiddevice, instead of global variable. This patch moves the pb_fnmode module parameter from usbhid module to hid module, but apart from that retains backward compatibility with respect to changing the mode through sysfs. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25USB HID: fix hid_blacklist clash for 0x08ca/0x0010Jiri Kosina
commit d8c8a393166d6283003fb111d0b4a40931c0eda4 introduced a clash in hid_blacklist for 0x08ca/0x0010 (GTCO vs. AIPTEK). As the vendor of GTCO device doesn't seem to be interested in supporting their legacy HW with this conflicting ids, it is OK to remove it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-23[PATCH] funsoft: ktermios fixAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-22USB: unusual_devs.h entry for nokia 6233Manuel Osdoba
In appendix a patch for the nokia 6233 mobile phone is included. The patch is against 2.6.20-rc5. It is my first patch. Hopefully it has the right format. The code makes my nokia 6233 on my computer work. From: Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: Fix for typo in ohci-ep93xx.cPetr Stetiar
Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.html Signed-off-by: Petr Stetiar <ynezz@true.cz> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: disable USB_MULTITHREAD_PROBEGreg Kroah-Hartman
Disable the USB_MULTITHREAD_PROBE option because it causes crashes on people's machines and they never remember to actually read the config help files. No one likes this, everyone hates it, I'm going to go eat worms... The full logic will be ripped out later. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: add vendor/device id for Option GT Max 3.6 cardsgarrett_damore@tadpole.com
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: unusual_devs.h for 0x046b:ff40Pete Zaitcev
American Megatrends did something wrong in their floppy emulator. It breaks with both kinds of MODE SENSE which our stack sends. Alan and I tried a few tweaks, and got LUNs sensed right, but US_FL_NO_WP_DETECT is still needed. I set the firmware bracket to 1.00 exactly, in case AMI or Sun fix it with a firmware update. Hey, you never know. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: make usbhid ignore Imation Disc StakkaOliver Neukum
on request of the sourceforge project for this device, a kind of robotized CD storage, it should be ignored by the generic driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: rndis_host: fix crash while probing a Nokia S60 mobileDaniel Gollub
Bug fix for driver rndis_host which fixes rndis_host probing certain Nokia S60 (Series 60) mobiles. While the rndis_host get probed by usbnet and tries to bind the Nokia mobile the bind is going to fail. The rndis_host module tries to release the device, in a wrong way, which cause the oops. Fixes Bugzilla #7201 Signed-off-by: Daniel Gollub <dgollub@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22USB: asix: Detect internal PHY and enable/use accordinglyAndres Salomon
Different AX88772 dongles use different PHYs; the chip is capable of using both a primary and secondary PHY, and supports an internal and external PHY. It appears that some DUB-E100 devices use the internal PHY, so trying to use an external one will not work (note that this is different across revisions, as well; the "A" and "B" revs of the DUB-E100 use different PHYs!). The data sheet for the AX88772 chip specifies that the internal PHY id will be 0x10, so if that's read from the EEPROM, we should use that rather than attempting to use an external PHY. Thanks to Mitch Bradley for pointing this out! Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Hollis <dhollis@davehollis.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touchedDaniel Ritz
ITM screens send invalid x/y data when not touched. this was fixes a while ago but the problem is if the screen is not touched anymore the driver never does not report BTN_TOUCH as zero. fix it by sending the report with the last valid coordinates when pressure is released. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: J.P. Delport <jpdelport@csir.co.za> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-21hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklistJeremy Roberson
Adds GTCO CalComp Interwrite IPanels to the hid-core.c blacklist. Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo ↵Anssi Hannula
breakage The commit 4916b3a57fc94664677d439b911b8aaf86c7ec23 introduced a hid regression between 2.6.19 and 2.6.20-rc1. The device put in input_dev->cdev is now of type usb_device instead of usb_interface. Before: > # readlink -f /sys/class/input/input6/event4/device > /sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1 After: > # readlink -f /sys/class/input/input3/event3/device > /sys/devices/pci0000:00/0000:00:10.0/usb1/1-1 This causes breakage: > # udevinfo -q all -n /dev/input/event3 > P: /class/input/input3/event3 > N: input/event3 > S: input/by-path/pci-1-1--event- > E: ID_SERIAL=noserial > E: ID_PATH=pci-1-1- No ID_MODEL, ID_VENDOR, ID_REVISION, ID_TYPE etc etc. Fix this by assigning the intf->dev into hid->dev, and fixing all the users. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: GEYSER4_ISO needs quirkAdrian Friedli
I've got a newer MacBook with core2duo. Two keys on the keyboard are swapped, "unswaping" works with the same trick as GEYSER3_ISO. Signed-off-by: Adrian Friedli <masteradi@gmx.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUTRussell King
We have USB_HID _newly_ selected in configurations which didn't have it before, which overrides CONFIG_HID and builds HID without input support. Nevertheless, here's a patch to solve more of the same that my original patch attempted to solve. The original patch is still required. Seems to solve the final instance of this problem here. Signed-off-by: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-11[PATCH] really fix funsoft driverDavid Miller
Fix void cast and re-enable on sparc. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 03:49:25 +0000