| Age | Commit message (Collapse) | Author |
|---|
|
The variable for the 'permissive' module parameter used to be static
but was recently changed to be extern. This puts it in the kernel
global namespace if the driver is built-in, so its name should begin
with a prefix identifying the driver.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register")
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Originally Xen PV drivers only use single-page ring to pass along
information. This might limit the throughput between frontend and
backend.
The patch extends Xenbus driver to support multi-page ring, which in
general should improve throughput if ring is the bottleneck. Changes to
various frontend / backend to adapt to the new interface are also
included.
Affected Xen drivers:
* blkfront/back
* netfront/back
* pcifront/back
* scsifront/back
* vtpmfront
The interface is documented, as before, in xenbus_client.c.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
It's not clear to me why only the enabling operation got handled so
far.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
We print at the warninig level messages such as:
pciback 0000:90:00.5: MSI-X preparation failed (-38)
which is due to the hypervisor not supporting this sub-hypercall
(which was added in Xen 4.3).
Instead of having scary messages all the time - only have it
when the hypercall is actually supported.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.
Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.
This is CVE-2015-2150 / XSA-120.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
When a PF driver unloads, it may find it necessary to leave the VFs
around simply because of pciback having marked them as assigned to a
guest. Utilize a suitable notification to let go of the VFs, thus
allowing the PF to go back into the state it was before its driver
loaded (which in particular allows the driver to be loaded again with
it being able to create the VFs anew, but which also allows to then
pass through the PF instead of the VFs).
Don't do this however for any VFs currently in active use by a guest.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v2: Removed the switch statement, moved it about]
[v3: Redid it a bit differently]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
The commit "xen/pciback: Don't deadlock when unbinding." was using
the version of pci_reset_function which would lock the device lock.
That is no good as we can dead-lock. As such we swapped to using
the lock-less version and requiring that the callers
of 'pcistub_put_pci_dev' take the device lock. And as such
this bug got exposed.
Using the lock-less version is OK, except that we tried to
use 'pci_restore_state' after the lock-less version of
__pci_reset_function_locked - which won't work as 'state_saved'
is set to false. Said 'state_saved' is a toggle boolean that
is to be used by the sequence of a) pci_save_state/pci_restore_state
or b) pci_load_and_free_saved_state/pci_restore_state. We don't
want to use a) as the guest might have messed up the PCI
configuration space and we want it to revert to the state
when the PCI device was binded to us. Therefore we pick
b) to restore the configuration space.
We restore from our 'golden' version of PCI configuration space, when an:
- Device is unbinded from pciback
- Device is detached from a guest.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
A little cleanup. No functional difference.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
We had been printing it only if the device was built with
debug enabled. But this information is useful in the field
to troubleshoot.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Cleanup the function a bit - also include the id of the
domain that is using the device.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Instead of open-coding it in drivers that want to double check
that their functions are indeed holding the device lock.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
As commit 0a9fd0152929db372ff61b0d6c280fdd34ae8bdb
'xen/pciback: Document the entry points for 'pcistub_put_pci_dev''
explained there are four entry points in this function.
Two of them are when the user fiddles in the SysFS to
unbind a device which might be in use by a guest or not.
Both 'unbind' states will cause a deadlock as the the PCI lock has
already been taken, which then pci_device_reset tries to take.
We can simplify this by requiring that all callers of
pcistub_put_pci_dev MUST hold the device lock. And then
we can just call the lockless version of pci_device_reset.
To make it even simpler we will modify xen_pcibk_release_pci_dev
to quality whether it should take a lock or not - as it ends
up calling xen_pcibk_release_pci_dev and needs to hold the lock.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen updates from David Vrabel:
"Features and fixes:
- Add pvscsi frontend and backend drivers.
- Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses.
- Try and keep memory contiguous during PV memory setup (reduces
SWIOTLB usage).
- Allow front/back drivers to use threaded irqs.
- Support large initrds in PV guests.
- Fix PVH guests in preparation for Xen 4.5"
* tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits)
xen: remove DEFINE_XENBUS_DRIVER() macro
xen/xenbus: Remove BUG_ON() when error string trucated
xen/xenbus: Correct the comments for xenbus_grant_ring()
x86/xen: Set EFER.NX and EFER.SCE in PVH guests
xen: eliminate scalability issues from initrd handling
xen: sync some headers with xen tree
xen: make pvscsi frontend dependant on xenbus frontend
arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options
xen-scsifront: don't deadlock if the ring becomes full
x86: remove the Xen-specific _PAGE_IOMAP PTE flag
x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings
x86: skip check for spurious faults for non-present faults
xen/efi: Directly include needed headers
xen-scsiback: clean up a type issue in scsiback_make_tpg()
xen-scsifront: use GFP_ATOMIC under spin_lock
MAINTAINERS: Add xen pvscsi maintainer
xen-scsiback: Add Xen PV SCSI backend driver
xen-scsifront: Add Xen PV SCSI frontend driver
xen: Add Xen pvSCSI protocol description
xen/events: support threaded irqs for interdomain event channels
...
|
|
The DEFINE_XENBUS_DRIVER() macro looks a bit weird and causes sparse
errors.
Replace the uses with standard structure definitions instead. This is
similar to pci and usb device registration.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Use PCI device flag helper functions when assigning or releasing device.
No functional change.
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
|
|
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@
- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;
// </smpl>
[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Fix to return -EFAULT from the error handling case instead of 0 when
version mismatch with pcifront.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle were:
- reduced/streamlined smp_mb__*() interface that allows more usecases
and makes the existing ones less buggy, especially in rarer
architectures
- add rwsem implementation comments
- bump up lockdep limits"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
rwsem: Add comments to explain the meaning of the rwsem's count field
lockdep: Increase static allocations
arch: Mass conversion of smp_mb__*()
arch,doc: Convert smp_mb__*()
arch,xtensa: Convert smp_mb__*()
arch,x86: Convert smp_mb__*()
arch,tile: Convert smp_mb__*()
arch,sparc: Convert smp_mb__*()
arch,sh: Convert smp_mb__*()
arch,score: Convert smp_mb__*()
arch,s390: Convert smp_mb__*()
arch,powerpc: Convert smp_mb__*()
arch,parisc: Convert smp_mb__*()
arch,openrisc: Convert smp_mb__*()
arch,mn10300: Convert smp_mb__*()
arch,mips: Convert smp_mb__*()
arch,metag: Convert smp_mb__*()
arch,m68k: Convert smp_mb__*()
arch,m32r: Convert smp_mb__*()
arch,ia64: Convert smp_mb__*()
...
|
|
which are quite a few. It should be evident that dealing with that
many options is a bit complex.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
And also mention that you cannot do any pci_reset_function,
pci_reset_slot, or such calls. This is because they take the same
lock as SysFS does - and we would end up with a dead-lock if
we call those functions.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
When the toolstack wants us to drop or add an PCI device it
changes the XenBus state to Configuring - and as result of that
we find out which devices we should still be exporting out and
which ones not. For the ones we don't need anymore we need to
do an PCI reset so that it is ready for the next guest.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
We were doing the operations of freeing and reset in the wrong
order. Granted nothing broke because the reset functions just
set bar->which = 0.
But nonethless this was incorrect.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
We are using 'psdev->dev','found_psdev->dev', and 'dev' at the
same time - and they all point to the same structure.
To keep it straight lets just use one - 'dev'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
|
|
Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There is a missing curly brace here so we might print some extra debug
information.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
It need to free dev_entry when it failed to assign to a new
slot on the virtual PCI bus.
smatch says:
drivers/xen/xen-pciback/vpci.c:142 __xen_pcibk_add_pci_dev() warn:
possible memory leak of 'dev_entry'
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.
Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME
Coalesce formats and add missing word spaces
Add missing newlines
Align arguments and reflow to 80 columns
Remove DRV_NAME from formats as pr_fmt adds the same content
This does change some of the prefixes of these messages
but it also does make them more consistent.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Fix to return -ENOENT in the pcistub_device_find() and pci_get_drvdata()
error handling case instead of 0(overwrite to 0 by str_to_slot()), as done
elsewhere in this function.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
For MSI-X capable devices the hypervisor wants to write protect the
MSI-X table and PBA, yet it can't assume that resources have been
assigned to their final values at device enumeration time. Thus have
pciback do that notification, as having the device controlled by it is
a prerequisite to assigning the device to guests anyway.
This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI:
add mechanism to fully protect MSI-X table from PV guest accesses") on
the master branch of git://xenbits.xen.org/xen.git.
CC: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
While shuting down a HVM guest with pci devices passed through we
get this:
pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002)
------------[ cut here ]------------
WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0()
Hardware name: MS-7640
Device pciback
disabling already-disabled device
Modules linked in:
Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1
Call Trace:
[<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0
[<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50
[<ffffffff813cf288>] pci_disable_device+0x88/0xa0
[<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0
[<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120
[<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120
[<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0
This fixes the bug.
CC: stable@vger.kernel.org
Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
"This has two fixes. One is a security fix wherein we would spam the
kernel printk buffer if one of the guests was misbehaving. The other
is much tamer and it was us only checking for one type of error from
the IRQ subsystem (when allocating new IRQs) instead of for all of
them.
- Fix an IRQ allocation where we only check for a specific error (-1).
- CVE-2013-0231 / XSA-43. Make xen-pciback rate limit error messages
from xen_pcibk_enable_msi{,x}()"
* tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: fix error handling path if xen_allocate_irq_dynamic fails
xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
|
|
... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).
This is CVE-2013-0231 / XSA-43.
Also make the two messages uniform in both their wording and severity.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
- CVE-2013-0190/XSA-40 (or stack corruption for 32-bit PV kernels)
- Fix racy vma access spotted by Al Viro
- Fix mmap batch ioctl potentially resulting in large O(n) page allcations.
- Fix vcpu online/offline BUG:scheduling while atomic..
- Fix unbound buffer scanning for more than 32 vCPUs.
- Fix grant table being incorrectly initialized
- Fix incorrect check in pciback
- Allow privcmd in backend domains.
Fix up whitespace conflict due to ugly merge resolution in Xen tree in
arch/arm/xen/enlighten.c
* tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests.
Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic."
xen/gntdev: remove erronous use of copy_to_user
xen/gntdev: correctly unmap unlinked maps in mmu notifier
xen/gntdev: fix unsafe vma access
xen/privcmd: Fix mmap batch ioctl.
Xen: properly bound buffer access when parsing cpu/*/availability
xen/grant-table: correctly initialize grant table version 1
x86/xen : Fix the wrong check in pciback
xen/privcmd: Relax access control in privcmd_ioctl_mmap
|
|
Fix the wrong check in pciback.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, and __devinitdata from these
drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen updates from Konrad Rzeszutek Wilk:
- Add necessary infrastructure to make balloon driver work under ARM.
- Add /dev/xen/privcmd interfaces to work with ARM and PVH.
- Improve Xen PCIBack wild-card parsing.
- Add Xen ACPI PAD (Processor Aggregator) support - so can offline/
online sockets depending on the power consumption.
- PVHVM + kexec = use an E820_RESV region for the shared region so we
don't overwrite said region during kexec reboot.
- Cleanups, compile fixes.
Fix up some trivial conflicts due to the balloon driver now working on
ARM, and there were changes next to the previous work-arounds that are
now gone.
* tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/PVonHVM: fix compile warning in init_hvm_pv_info
xen: arm: implement remap interfaces needed for privcmd mappings.
xen: correctly use xen_pfn_t in remap_domain_mfn_range.
xen: arm: enable balloon driver
xen: balloon: allow PVMMU interfaces to be compiled out
xen: privcmd: support autotranslated physmap guests.
xen: add pages parameter to xen_remap_domain_mfn_range
xen/acpi: Move the xen_running_on_version_or_later function.
xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h
xen/acpi: Fix compile error by missing decleration for xen_domain.
xen/acpi: revert pad config check in xen_check_mwait
xen/acpi: ACPI PAD driver
xen-pciback: reject out of range inputs
xen-pciback: simplify and tighten parsing of device IDs
xen PVonHVM: use E820_Reserved area for shared_info
|
|
Correct spelling typo in multiple drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This add checks for out of range numbers (including in cases where the
folding of slot and function into a single value could yield false
matches).
It also removes the bogus field width restrictions in str_to_quirk() -
nowhere else in the driver this is being done, and hence this function
could reject input the equivalent of which would be happily accepted
in other places (in particular, "0x" prefixes causing the effective
width of the actual number to be either zero or less than what would be
required to cover the full range of valid values). Note that for the
moment this second part is cosmetic only, as the kernel's sscanf()
currently ignores the field widths, but a patch to overcome this is on
its way.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Now that at least one of the conformance problems of the kernel's
sscanf() was addressed (commit da99075c1d368315e1508b6143226c0d27b621e0),
we can improve the parsing done in xen-pciback both in terms of code
readability and correctness (in particular properly rejecting input
strings not well formed).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
* commit 'v3.7-rc1': (10892 commits)
Linux 3.7-rc1
x86, boot: Explicitly include autoconf.h for hostprogs
perf: Fix UAPI fallout
ARM: config: make sure that platforms are ordered by option string
ARM: config: sort select statements alphanumerically
UAPI: (Scripted) Disintegrate include/linux/byteorder
UAPI: (Scripted) Disintegrate include/linux
UAPI: Unexport linux/blk_types.h
UAPI: Unexport part of linux/ppp-comp.h
perf: Handle new rbtree implementation
procfs: don't need a PATH_MAX allocation to hold a string representation of an int
vfs: embed struct filename inside of names_cache allocation if possible
audit: make audit_inode take struct filename
vfs: make path_openat take a struct filename pointer
vfs: turn do_path_lookup into wrapper around struct filename variant
audit: allow audit code to satisfy getname requests from its names_list
vfs: define struct filename and have getname() return it
btrfs: Fix compilation with user namespace support enabled
userns: Fix posix_acl_file_xattr_userns gid conversion
userns: Properly print bluetooth socket uids
...
|
|
VFs are reported as single-function devices in PCI_HEADER_TYPE, which
causes pci_scan_slot() in the PV domU to skip all VFs beyond #0 in the
pciback-provided slot. Avoid this by assigning each VF to a separate
virtual slot.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen update from Konrad Rzeszutek Wilk:
"Features:
- When hotplugging PCI devices in a PV guest we can allocate
Xen-SWIOTLB later.
- Cleanup Xen SWIOTLB.
- Support pages out grants from HVM domains in the backends.
- Support wild cards in xen-pciback.hide=(BDF) arguments.
- Update grant status updates with upstream hypervisor.
- Boot PV guests with more than 128GB.
- Cleanup Xen MMU code/add comments.
- Obtain XENVERS using a preferred method.
- Lay out generic changes to support Xen ARM.
- Allow privcmd ioctl for HVM (used to do only PV).
- Do v2 of mmap_batch for privcmd ioctls.
- If hypervisor saves the LED keyboard light - we will now instruct
the kernel about its state.
Fixes:
- More fixes to Xen PCI backend for various calls/FLR/etc.
- With more than 4GB in a 64-bit PV guest disable native SWIOTLB.
- Fix up smatch warnings.
- Fix up various return values in privmcmd and mm."
* tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits)
xen/pciback: Restore the PCI config space after an FLR.
xen-pciback: properly clean up after calling pcistub_device_find()
xen/vga: add the xen EFI video mode support
xen/x86: retrieve keyboard shift status flags from hypervisor.
xen/gndev: Xen backend support for paged out grant targets V4.
xen-pciback: support wild cards in slot specifications
xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer.
xen/swiotlb: Remove functions not needed anymore.
xen/pcifront: Use Xen-SWIOTLB when initting if required.
xen/swiotlb: For early initialization, return zero on success.
xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used.
xen/swiotlb: Move the error strings to its own function.
xen/swiotlb: Move the nr_tbl determination in its own function.
xen/arm: compile and run xenbus
xen: resynchronise grant table status codes with upstream
xen/privcmd: return -EFAULT on error
xen/privcmd: Fix mmap batch ioctl error status copy back.
xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl
xen/mm: return more precise error from xen_remap_domain_range()
xen/mmu: If the revector fails, don't attempt to revector anything else.
...
|
|
When we do an FLR, or D0->D3_hot we may lose the BARs as the
device has turned itself off (and on). This means the device cannot
function unless the pci_restore_state is called - which it is
when the PCI device is unbound from the Xen PCI backend driver.
For PV guests it ends up calling pci_enable_device / pci_enable_msi[x]
which does the proper steps
That however is not happening if a HVM guest is run as QEMU
deals with PCI configuration space. QEMU also requires that the
device be "parked" under the ownership of a pci-stub driver to
guarantee that the PCI device is not being used. Hence we
follow the same incantation as pci_reset_function does - by
doing an FLR, then restoring the PCI configuration space.
The result of this patch is that when you run lspci, you get
now this:
- Region 0: [virtual] Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
- Region 1: [virtual] Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
+ Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
+ Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=32]
- Region 3: [virtual] Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K]
+ Region 3: Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K]
The [virtual] means that lspci read those entries from SysFS but when
it read them from the device it got a different value (0xfffffff).
CC: stable@vger.kernel.org #only for 3.5, 3.6
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
As the function calls pcistub_device_get() before returning non-NULL,
its callers need to take care of calling pcistub_device_put() on
(mostly, but not exclusively) error paths.
Otoh, the function already guarantees that the 'dev' member is non-NULL
upon successful return, so callers do not need to check for this a
second time.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Particularly for hiding sets of SR-IOV devices, specifying them all
individually is rather cumbersome. Therefore, allow function and slot
numbers to be replaced by a wildcard character ('*').
Unfortunately this gets complicated by the in-kernel sscanf()
implementation not being really standard conformant - matching of
plain text tails cannot be checked by the caller (a patch to overcome
this will be sent shortly, and a follow-up patch for simplifying the
code is planned to be sent when that fixed went upstream).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
* commit 'v3.6-rc5': (1098 commits)
Linux 3.6-rc5
HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
Remove user-triggerable BUG from mpol_to_str
xen/pciback: Fix proper FLR steps.
uml: fix compile error in deliver_alarm()
dj: memory scribble in logi_dj
Fix order of arguments to compat_put_time[spec|val]
xen: Use correct masking in xen_swiotlb_alloc_coherent.
xen: fix logical error in tlb flushing
xen/p2m: Fix one-off error in checking the P2M tree directory.
powerpc: Don't use __put_user() in patch_instruction
powerpc: Make sure IPI handlers see data written by IPI senders
powerpc: Restore correct DSCR in context switch
powerpc: Fix DSCR inheritance in copy_thread()
powerpc: Keep thread.dscr and thread.dscr_inherit in sync
powerpc: Update DSCR on all CPUs when writing sysfs dscr_default
powerpc/powernv: Always go into nap mode when CPU is offline
powerpc: Give hypervisor decrementer interrupts their own handler
powerpc/vphn: Fix arch_update_cpu_topology() return value
ARM: gemini: fix the gemini build
...
Conflicts:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
drivers/rapidio/devices/tsi721.c
|
|
Covers the rest of the uses of pci error handler.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When we do FLR and save PCI config we did it in the wrong order.
The end result was that if a PCI device was unbind from
its driver, then binded to xen-pciback, and then back to its
driver we would get:
> lspci -s 04:00.0
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
13:42:12 # 4 :~/
> echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind
> modprobe e1000e
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:04:00.0: Disabling ASPM L0s L1
e1000e 0000:04:00.0: enabling device (0000 -> 0002)
xen: registering gsi 48 triggering 0 polarity 1
Already setup the GSI :48
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e: probe of 0000:04:00.0 failed with error -2
This fixes it by first saving the PCI configuration space, then
doing the FLR.
Reported-by: Ren, Yongjie <yongjie.ren@intel.com>
Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org
|
