aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-06-06iwlwifi: add iwl_set_bits_maskJohannes Berg
In a few cases we need to set a value in a certain mask inside a register, add the function iwl_set_bits_mask() to make such code easy. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: allocate Tx cmd pool per deviceEmmanuel Grumbach
Different transports will have different needs: New tranports need headroom for their own use before the Tx cmd. So allocate the Tx cmd pool in the transport and give it a unique name based on dev_name. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: update mask value for SCD queue configEmmanuel Grumbach
Although we don't use bit 24, this bit is valid, but bit 23 is not. Update the mask accordingly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: s/txq_setup/txq_enableEmmanuel Grumbach
We need to be able to enable / disable Tx queues in HW dynamically. So this function is no longer related to AGG only. It can do the job for any queue, even AC ones. Change the name to better reflect its role. Also use the new function to configure the AC / CMD queues in tx_start. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: s/txq_agg_disable/txq_disableEmmanuel Grumbach
We need to be able to enable / disable Tx queues in HW dynamically. So this function is no longer related to AGG only. It can do the job for any queue, even AC ones. Change the name to better reflect its role. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: use iwl_trans_set_wr_ptrs to init the queuesEmmanuel Grumbach
This functions does the job so use it instead of duplicating the code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: first config the SCD queues, then activate themEmmanuel Grumbach
The DMA channels of the FH should be activated after the configuration of the SCD queues too. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: SCD_INT_MSK is obsolete - don't update itEmmanuel Grumbach
The scheduler can issue an interrupt when moving the read pointer. To get this interrupt, the driver needs to configure what queue can issue an interrupt when its read pointer moves in the scheduler: this is the SCD_INT_MSK. The driver also needs to enable the interrupt in CSR_INT_MASK (bit CSR_INT_BIT_SCD). Since we don't enable the scheduler interrupt in CSR_INT_MASK, there is no point in requesting an interrupt from the scheduler: it will be masked anyway. So don't configure the scheduler to issue interrupts at all. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move ht40 bitmap into configJohannes Berg
There's no need to dynamically fill the HT40 band bitmap as it's a device parameter, just put it into the HT configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: unify tx_chains_num settingJohannes Berg
There's no need to copy the same code for all devices since none of the 5000 series devices (that don't have the RX SISO override) don't set the rx_with_siso_diversity variable. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move DVM code into subdirectoryJohannes Berg
Since we're working on another mode/driver inside iwlwifi, move the current one into a subdirectory to more cleanly separate the code. While at it, rename all the files. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: trust mac80211 HT40 settingJohannes Berg
When mac80211 asks us to do HT40, it'll not do so on a channel that we marked as not having HT40+/- with IEEE80211_CHAN_NO_HT40PLUS (or MINUS). Thus, there's no need to verify it again in the driver. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move PCIe into subdirectoryJohannes Berg
Structure the code a bit more and move all PCIe code including the hardware configuration files into a PCIe specific subdirectory. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: clear STATUS_SCAN_HW when PAN_PARAMS failsIlan Peer
The STATUS_SCAN_HW is set before calling iwlagn_set_pan_params (used as an input to calculate slot time allocation). The bit needs to be cleared in case sending the command fails. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: give HT format to mac80211/radiotapJohannes Berg
We know whether we received a frame in GF format or not, add it to the radiotap information. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: use mac80211 channel for radar checkJohannes Berg
In channel switch, instead of relying on our internal channel database, just use the mac80211 channel that we filled with that information on startup. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: use mac80211 channels for reset scanJohannes Berg
Instead of iterating our own channel list, use the mac80211 channel list since that's already processed per band and thus makes for less code. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: trust mac80211 channel settingJohannes Berg
mac80211 will never set, switch to, or scan on an invalid channel, so remove the code to validate the channels against the driver channel list. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: use mac80211 channel in connection initJohannes Berg
mac80211 guarantees that the channel pointer is always valid, so we can use that instead of our own channel list. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: make a lot of functions staticJohannes Berg
A lot of functions were temporarily made non-static for experimental work, make them static again now. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: handle race condition in ROC flowIlan Peer
When a remain on channel request from mac80211 is followed by a request to tx a mgmt frame offchannel, it is possible that the remain on channel expires before the device reported the tx status for the frame. This causes a race condition in mac80211. To fix this, delay the ROC notification to mac80211 until the device reported the Tx status for all frames in the aux queue. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: Check BSS ctx active before call mac80211Ilan Peer
It is possible that the BSS context is not active (for example when the current mode is set to GO), or that the vif->type is different than station. In such a case we cannot call mac80211 to report the average rssi for the interface (the function assumes that the vif is valid and that the type is station). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-05net/wireless: ipw2200: introduce ipw_read_eeprom functionStanislav Yakovlev
We separate reading of device's eeprom content from writing it back to the device's sram. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: support NL80211_HIDDEN_SSID_ZERO_LEN for uAPAvinash Patil
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mwifiex: invalidate bss config before setting channel for uAPAvinash Patil
Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to start_ap functionJohannes Berg
Instead of setting the channel first and then starting the AP, let cfg80211 store the channel and provide it as one of the AP settings. This means that now you have to set the channel before you can start an AP interface, but since hostapd/wpa_supplicant always do that we're OK with this change. Alternatively, it's now possible to give the channel as an attribute to the start-ap nl80211 command, overriding any preset channel. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: add debugging to shadow registers and fix typoMeenakshi Venkataraman
Add a debugging log when using shadow registers. Also fix a minor typo in this connection. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: clean up coding style in PCIe transportJohannes Berg
Mostly clean up indentation around parentheses after if, function calls, etc. and also a few unneeded line breaks and some other things. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: move notification wait into coreJohannes Berg
This code is a library to be used by multiple opmodes, so move it into the iwlwifi module. Reviewed-by: Donald H Fry <donald.h.fry@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: implement dynamic opmode loadingDon Fry
This is the next step in splitting up the driver, making the uCode API dependent pieces of it live in separate modules. Right now there's only one so it's not user-selectable, but we're actively working on more. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: move IWL_CMD_FAILED_MSKJohannes Berg
This is common, not uCode API specific, so move it to the transport together with the command header struct definition. Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Guy Cohen <guy.cohen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: properly handle device_set_wakeup_enableJohannes Berg
This is intended to be set whenever wakeup will be needed upon suspend, not only when suspending, so use the new callbacks to set it then. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: Move IWL_MASK macro to transport.Gregory Greenman
This macro is needed by other transports besides PCIe, thus moving to a common location. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: s/iwlagn_unmap_tfd/iwl_unmap_tfdEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: s/iwlagn_txq_free_tfd/iwl_txq_free_tfdEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: add __printf argument checkingJohannes Berg
Joe Perches suggested adding the __printf attribute to the __iwl_dbg function to check arguments; add it to all of the logging functions (err, warn, info, dbg and crit.) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: fix debug print in iwl_sta_calc_ht_flagsMeenakshi Venkataraman
We missed passing an argument to the debug print. Fix it. Cc: stable@kernel.org Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05iwlwifi: fix prints in iwl_rx_handleEmmanuel Grumbach
The debug prints were wrong and buggy. The HW pointer wasn't printed correctly, it was mixed up with the pointer to the rxbuf. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05rt2x00: Add support for RT5360 based PCI devices.villacis@palosanto.com
This chip is used at least by the D-Link DWA-525 adapter. Signed-off-by: Alex Villac<ED>s Lasso <a_villacis@palosanto.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05ath9k: Support ethtool getstats api.Ben Greear
This returns many of the values that formerly could only be obtained from debugfs. This should be an improvement when trying to access these counters programatically. Currently this support is only enabled when DEBUGFS is enabled because otherwise these stats are not accumulated. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05ath9k: Fix modal EEPROM dumpMohammed Shafi Shajakhan
we provide excess buffer size for 'simple_read_from_buffer' for modal EEPROM dump. This results in trailing NULL bytes at the end of EEPROM dump, fix this. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Holger Schurig <holgerschurig@googlemail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: Holger Schurig <holgerschurig@gogglemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05brcm80211: brcmu_pkt_buf_free_skb() should handle NULLDan Carpenter
This is potentially called with NULL pointers, for example, look at brcmf_c_prec_enq(). Since it's a free() function, probably people expect it to handle NULL pointers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05brcm80211: remove an unneeded NULL checkDan Carpenter
This code causes a static checker warning because "pi" gets dereferenced before it is checked. The dereference is inside the write_phy_reg() function which is called from wlc_phy_write_txmacreg_nphy(). This code is only called from wlc_phy_init_nphy() and "pi" is a valid pointer so we can remove the check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05rt2800usb: 2001:3c17 is an RT3370 deviceAlbert Pool
D-Link DWA-123 rev A1 Signed-off-by: Albert Pool<albertpool@solcon.nl> Cc: <stable@vger.kernel.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-02Merge tag 'dm-3.5-changes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
2012-06-03dm thin: provide userspace access to pool metadataJoe Thornber
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: https://github.com/jthornber/thin-provisioning-tools Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm thin: use slab mempoolsMike Snitzer
Use dedicated caches prefixed with a "dm_" name rather than relying on kmalloc mempools backed by generic slab caches so the memory usage of thin provisioning (and any leaks) can be accounted for independently. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: allow ioctls to trigger pg initMikulas Patocka
After the failure of a group of paths, any alternative paths that need initialising do not become available until further I/O is sent to the device. Until this has happened, ioctls return -EAGAIN. With this patch, new paths are made available in response to an ioctl too. The processing of the ioctl gets delayed until this has happened. Instead of returning an error, we submit a work item to kmultipathd (that will potentially activate the new path) and retry in ten milliseconds. Note that the patch doesn't retry an ioctl if the ioctl itself fails due to a path failure. Such retries should be handled intelligently by the code that generated the ioctl in the first place, noting that some SCSI commands should not be retried because they are not idempotent (XOR write commands). For commands that could be retried, there is a danger that if the device rejected the SCSI command, the path could be errorneously marked as failed, and the request would be retried on another path which might fail too. It can be determined if the failure happens on the device or on the SCSI controller, but there is no guarantee that all SCSI drivers set these flags correctly. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: delay retry of bypassed pgMike Christie
If I/O needs retrying and only bypassed priority groups are available, set the pg_init_delay_retry flag to wait before retrying. If, for example, the reason for the bypass is that the controller is getting reset or there is a firmware upgrade happening, retrying right away would cause a flood of log messages and retries for what could be a few seconds or even several minutes. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: reduce size of struct multipathMike Snitzer
Move multipath structure's 'lock' and 'queue_size' members to eliminate two 4-byte holes. Also use a bit within a single unsigned int for each existing flag (saves 8-bytes). This allows future flags to be added without each consuming an unsigned int. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 11:13:02 +0000