aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-12-20bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logicMichael Chan
[ Upstream commit c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 ] When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Fix wrong return value check in bnxt_close_nic()Kalesh AP
[ Upstream commit bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e ] The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Save ring error counters across resetMichael Chan
[ Upstream commit 4c70dbe3c0087b439b9e5015057e3e378cf5d8b1 ] Currently, the ring counters are stored in the per ring datastructure. During reset, all the rings are freed together with the associated datastructures. As a result, all the ring error counters will be reset to zero. Add logic to keep track of the total error counts of all the rings and save them before reset (including ifdown). The next patch will display these total ring error counters under ethtool -S. Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/ Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230817231911.165035-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Clear resource reservation during resumeSomnath Kotur
[ Upstream commit 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a ] We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_spi: Fix reset behaviorStefan Wahren
[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ] In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Fix ethtool -G iface tx behaviorStefan Wahren
[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ] After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Prevent crash on TX ring changesStefan Wahren
[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ] The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_workMoshe Shemesh
[ Upstream commit eab0da38912ebdad922ed0388209f7eb0a5163cd ] Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: lenovo: Restrict detection of patched firmware only to USB cptkbdMikhail Khvainitski
[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ] Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") introduced a regression for ThinkPad TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses the same workarounds) but slightly different so that there are false-positives during detecting well-behaving firmware. This commit restricts detecting well-behaving firmware to the only model which known to have one and have stable enough quirks to not cause false-positives. Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468 Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for ASUS USB-C2500Kelly Kane
[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ] The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for D-Link DUB-E250Antonio Napolitano
[ Upstream commit 72f93a3136ee18fd59fa6579f84c07e93424681e ] The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Antonio Napolitano <anton@polit.no> Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7037d95a047c ("r8152: add vendor/device ID pair for ASUS USB-C2500") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add USB device driver for config selectionBjørn Mork
[ Upstream commit ec51fbd1b8a2bca2948dede99c14ec63dc57ff6b ] Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä
[ Upstream commit 20c2dbff342aec13bf93c2f6c951da198916a455 ] Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvoJani Nikula
[ Upstream commit f2f9c8cb6421429ef166d6404426693212d0ca07 ] Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/lvds: Use REG_BIT() & co.Ville Syrjälä
[ Upstream commit 9dd56e979cb69f5cd904574c852b620777a2f69f ] Use REG_BIT() & co. for the LVDS port register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/display: Drop check for doublescan mode in modevalidAnkit Nautiyal
[ Upstream commit 9d04eb20bc71a383b4d4e383b0b7fac8d38a2e34 ] Since the DP/HDMI connector do not set connector->doublescan_allowed, the doublescan modes will get automatically filtered during drm_helper_probe_single_connector_modes(). Therefore check for double scan modes is not required and is dropped from modevalid functions for both DP and HDMI. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13USB: gadget: core: adjust uevent timing on gadget unbindRoy Luo
commit 73ea73affe8622bdf292de898da869d441da6a9d upstream. The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13devcoredump: Send uevent once devcd is readyMukesh Ojha
commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream. dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_omap: Add earlycon support for the AM654 UART controllerRonald Wahl
commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream. Currently there is no support for earlycon on the AM654 UART controller. This commit adds it. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Do not start RX DMA on THRI interruptRonald Wahl
commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream. Starting RX DMA on THRI interrupt is too early because TX may not have finished yet. This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with an AM62 SoC that is using the 8250 OMAP variant. Cc: stable@vger.kernel.org Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bitRonald Wahl
commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream. This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") which unfortunately set the UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never cleared it. Cc: stable@vger.kernel.org Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: sc16is7xx: address RX timeout interrupt errataDaniel Mack
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream. This device has a silicon bug that makes it report a timeout interrupt but no data in the FIFO. The datasheet states the following in the errata section 18.1.4: "If the host reads the receive FIFO at the same time as a time-out interrupt condition happens, the host might read 0xCC (time-out) in the Interrupt Indication Register (IIR), but bit 0 of the Line Status Register (LSR) is not set (means there is no data in the receive FIFO)." The errata description seems to indicate it concerns only polled mode of operation when reading bit 0 of the LSR register. However, tests have shown and NXP has confirmed that the RXLVL register also yields 0 when the bug is triggered, and hence the IRQ driven implementation in this driver is equally affected. This bug has hit us on production units and when it does, sc16is7xx_irq() would spin forever because sc16is7xx_port_irq() keeps seeing an interrupt in the IIR register that is not cleared because the driver does not call into sc16is7xx_handle_rx() unless the RXLVL register reports at least one byte in the FIFO. Fix this by always reading one byte from the FIFO when this condition is detected in order to clear the interrupt. This approach was confirmed to be correct by NXP through their support channels. Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13ARM: PL011: Fix DMA supportArnd Bergmann
commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream. Since there is no guarantee that the memory returned by dma_alloc_coherent() is associated with a 'struct page', using the architecture specific phys_to_page() is wrong, but using virt_to_page() would be as well. Stop using sg lists altogether and just use the *_single() functions instead. This also simplifies the code a bit since the scatterlists in this driver always have only one entry anyway. https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers gc: Add a commit log from the initial thread: https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13usb: typec: class: fix typec_altmode_put_partner to put plugsRD Babiera
commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream. When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released evaluates against the released altmode's partner instead of the calling altmode itself, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. typec_altmode_set_partner is not run for port altmodes, so also add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"Mathias Nyman
commit 24be0b3c40594a14b65141ced486ae327398faf8 upstream. This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac. Enabling runtime pm as default for all AMD xHC 1.1 controllers caused regression. An initial attempt to fix those was done in commit a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states") but new issues are still seen. Revert this to get those AMD xHC 1.1 systems working This patch went to stable an needs to be reverted from there as well. Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1") Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13parport: Add support for Brainboxes IX/UC/PX parallel cardsCameron Williams
commit 1a031f6edc460e9562098bdedc3918da07c30a6e upstream. Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157, PX-203 and PX-475 (LPT port) Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_dw: Add ACPI ID for Granite Rapids-D UARTAndy Shevchenko
commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream. Granite Rapids-D has an additional UART that is enumerated via ACPI. Add ACPI ID for it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13usb: gadget: f_hid: fix report descriptor allocationKonstantin Aladyshev
commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream. The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") has introduced a bug that leads to hid device corruption after the replug operation. Reverse device managed memory allocation for the report descriptor to fix the issue. Tested: This change was tested on the AMD EthanolX CRB server with the BMC based on the OpenBMC distribution. The BMC provides KVM functionality via the USB gadget device: - before: KVM page refresh results in a broken USB device, - after: KVM page refresh works without any issues. Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") Cc: stable@vger.kernel.org Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13drm/amdgpu: Update EEPROM I2C address for smu v13_0_0Candice Li
[ Upstream commit e0409021e34af50e7b6f31635c8d21583d7c43dd ] Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Add I2C EEPROM support on smu v13_0_6Candice Li
[ Upstream commit b81fde0dfe402e864ef1ac506eba756c89f1ad32 ] Support I2C EEPROM on smu v13_0_6. v2: Move IP_VERSION(13, 0, 6) ahead of IP_VERSION(13, 0, 10). Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: simplify amdgpu_ras_eeprom.cAlex Deucher
[ Upstream commit 6246059a19d4cd32ef1af42a6ab016b779cd68c4 ] All chips that support RAS also support IP discovery, so use the IP versions rather than a mix of IP versions and asic types. Checking the validity of the atom_ctx pointer is not required as the vbios is already fetched at this point. v2: add comments to id asic types based on feedback from Luben Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Return from switch early for EEPROM I2C addressLuben Tuikov
[ Upstream commit 8782007b5f5795f118c5167f46d8c8142abcc92f ] As soon as control->i2c_address is set, return; remove the "break;" from the switch--it is unnecessary. This mimics what happens when for some cases in the switch, we call helper functions with "return <helper function>". Remove final function "return true;" to indicate that the switch is final and terminal, and that there should be no code after the switch. Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Remove second moot switch to set EEPROM I2C addressLuben Tuikov
[ Upstream commit 1bb745d7596d2b368fd9afb90473f3581495e39d ] Remove second switch since it already has its own function and case in the first switch. This also avoids requalifying the EEPROM I2C address for VEGA20, SIENNA CICHLID, and ALDEBARAN, as those have been set by the first switch and shouldn't match SMU v13.0.x. Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: 158225294683 ("drm/amdgpu: Add EEPROM I2C address for smu v13_0_0") Fixes: c9bdc6c3cf39 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Add support for RAS table at 0x40000Luben Tuikov
[ Upstream commit 64a3dbb06ad88d89a0958ccafc4f01611657f641 ] Add support for RAS table at I2C EEPROM address of 0x40000, since on some ASICs it is not at 0, but at 0x40000. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Tested-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Decouple RAS EEPROM addresses from chipsLuben Tuikov
[ Upstream commit 3b8164f8084ff7888ed24970efa230ff5d36eda8 ] Abstract RAS I2C EEPROM addresses from chip names, and set their macro definition names to the address they set, not the chip they attach to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS table start offset, this leaves us with only two macro definitions as opposed to five, and removes the redundancy of four. Cc: Candice Li <candice.li@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Remove redundant I2C EEPROM addressLuben Tuikov
[ Upstream commit da858deab88eb561f2196bc99b6dbd2320e56456 ] Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it represented (ARCTURUS), and since we don't include the I2C device type identifier in EEPROM memory addresses, i.e. that high up in the device abstraction--we only use EEPROM memory addresses, as memory is continuously represented by EEPROM device(s) on the I2C bus. Add a comment describing what these memory addresses are, how they come about and how they're usually extracted from the device address byte. Cc: Candice Li <candice.li@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Add EEPROM I2C address support for ip discoveryCandice Li
[ Upstream commit c9bdc6c3cf39df6db9c611d05fc512b1276b1cc8 ] 1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H 2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10Candice Li
[ Upstream commit bc22f8ec464af9e14263c3ed6a1c2be86618c804 ] Enable RAS EEPROM support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: e0409021e34a ("drm/amdgpu: Update EEPROM I2C address for smu v13_0_0") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: correct the amdgpu runtime dereference usage countPrike Liang
[ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ] Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.cSrinivasan Shanmugam
[ Upstream commit 93125cb704919f572c01e02ef64923caff1c3164 ] Fixes the below checkpatch.pl warnings: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line WARNING: suspect code indent for conditional statements (8, 12) WARNING: braces {} are not necessary for single statement blocks Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: c6df7f313794 ("drm/amdgpu: correct the amdgpu runtime dereference usage count") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/amdgpu: fix memory overflow in the IB testTim Huang
[ Upstream commit 6b0b7789a7a5f3e69185449f891beea58e563f9b ] Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13gpiolib: sysfs: Fix error handling on failed exportBoerge Struempfel
[ Upstream commit 95dd1e34ff5bbee93a28ff3947eceaf6de811b1a ] If gpio_set_transitory() fails, we should free the GPIO again. Most notably, the flag FLAG_REQUESTED has previously been set in gpiod_request_commit(), and should be reset on failure. To my knowledge, this does not affect any current users, since the gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted to 0. However the gpio_set_transitory() function calles the .set_config() function of the corresponding GPIO chip and there are some GPIO drivers in which some (unlikely) branches return other values like -EPROBE_DEFER, and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not be reset, which results in the pin being blocked until the next reboot. Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep") Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_writeSu Hui
[ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ] Clang static analyzer complains that value stored to 'rets' is never read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'. Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13misc: mei: client.c: return negative error code in mei_cl_writeSu Hui
[ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ] mei_msg_hdr_init() return negative error code, rets should be 'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'. Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13hwtracing: hisi_ptt: Add dummy callback pmu::read()Junhao He
[ Upstream commit 55e0a2fb0cb5ab7c9c99c1ad4d3e6954de8b73a0 ] When start trace with perf option "-C $cpu" and immediately stop it with SIGTERM or others, the perf core will invoke pmu::read() while the driver doesn't implement it. Add a dummy pmu::read() to avoid any issues. Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device") Signed-off-by: Junhao He <hejunhao3@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20231010084731.30450-6-yangyicong@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13coresight: etm4x: Remove bogous __exit annotation for some functionsUwe Kleine-König
[ Upstream commit 348ddab81f7b0983d9fb158df910254f08d3f887 ] etm4_platform_driver (which lives in ".data" contains a reference to etm4_remove_platform_dev(). So the latter must not be marked with __exit which results in the function being discarded for a build with CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer contain invalid data. etm4x_amba_driver referencing etm4_remove_amba() has the same issue. Drop the __exit annotations for the two affected functions and a third one that is called by the other two. For reasons I don't understand this isn't catched by building with CONFIG_DEBUG_SECTION_MISMATCH=y. Fixes: c23bc382ef0e ("coresight: etm4x: Refactor probing routine") Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: James Clark <james.clark@arm.com> Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/ Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13coresight: etm4x: Make etm4_remove_dev() return voidUwe Kleine-König
[ Upstream commit c5f231f1a7e18d28e02b282d33541d31358360e4 ] etm4_remove_dev() returned zero unconditionally. Make it return void instead, which makes it clear in the callers that there is no error to handle. Simplify etm4_remove_platform_dev() accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230518201629.260672-1-u.kleine-koenig@pengutronix.de Stable-dep-of: 348ddab81f7b ("coresight: etm4x: Remove bogous __exit annotation for some functions") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13binder: fix memory leaks of spam and pending workCarlos Llamas
commit 1aa3aaf8953c84bad398adf6c3cabc9d6685bf7d upstream A transaction complete work is allocated and queued for each transaction. Under certain conditions the work->type might be marked as BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when the target is currently frozen. However, these work types are not being handled in binder_release_work() so they will leak during a cleanup. This was reported by syzkaller with the following kmemleak dump: BUG: memory leak unreferenced object 0xffff88810e2d6de0 (size 32): comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s) hex dump (first 32 bytes): e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-..... 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114 [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline] [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline] [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152 [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010 [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline] [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352 [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline] [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline] [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857 [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the leaks by kfreeing these work types in binder_release_work() and handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup. Cc: stable@vger.kernel.org Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming") Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [cmllamas: backport to v6.1 by dropping BINDER_WORK_TRANSACTION_PENDING as commit 0567461a7a6e is not present. Remove fixes tag accordingly.] Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13md/raid6: use valid sector values to determine if an I/O should wait on the ↵David Jeffery
reshape commit c467e97f079f0019870c314996fae952cc768e82 upstream. During a reshape or a RAID6 array such as expanding by adding an additional disk, I/Os to the region of the array which have not yet been reshaped can stall indefinitely. This is from errors in the stripe_ahead_of_reshape function causing md to think the I/O is to a region in the actively undergoing the reshape. stripe_ahead_of_reshape fails to account for the q disk having a sector value of 0. By not excluding the q disk from the for loop, raid6 will always generate a min_sector value of 0, causing a return value which stalls. The function's max_sector calculation also uses min() when it should use max(), causing the max_sector value to always be 0. During a backwards rebuild this can cause the opposite problem where it allows I/O to advance when it should wait. Fixing these errors will allow safe I/O to advance in a timely manner and delay only I/O which is unsafe due to stripes in the middle of undergoing the reshape. Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: David Jeffery <djeffery@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13powercap: DTPM: Fix missing cpufreq_cpu_put() callsLukasz Luba
commit bdefd9913bdd453991ef756b6f7176e8ad80d786 upstream. The policy returned by cpufreq_cpu_get() has to be released with the help of cpufreq_cpu_put() to balance its kobject reference counter properly. Add the missing calls to cpufreq_cpu_put() in the code. Fixes: 0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function") Fixes: 0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support") Cc: v5.16+ <stable@vger.kernel.org> # v5.16+ Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 00:03:49 +0000