aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-09-10sfc: Allocate DMA and event rings using GFP_KERNELBen Hutchings
Currently we allocate DMA descriptor rings and event rings using pci_alloc_consistent() which selects non-blocking behaviour from the page allocator (GFP_ATOMIC). This is unnecessary, and since we currently allocate a single contiguous block for each ring (up to 32 pages!) these allocations are likely to fail if there is any significant memory pressure. Use dma_alloc_coherent() and GFP_KERNEL instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Fix failure paths in efx_probe_port()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Remove declarations of functions that no longer existBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Accumulate RX_NODESC_DROP count in rx_dropped, not rx_over_errorsBen Hutchings
rx_over_errors appears to be intended as a count of packets that overflow a packet buffer in the NIC. Given that we implement a cut-through receive path, this should always be 0. rx_dropped appears to be the correct counter for packets dropped due to lack of host buffers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Use MCDI RX_BAD_FCS_PKTS count as MAC rx_bad countBen Hutchings
Calculating rx_bad as rx_packets - rx_good is unnecessary and incorrect, since rx_good does not include control frames (e.g. pause frames) and rx_packets does. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/main.c
2010-09-09Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-09drivers/net/bnx2x: use ARRAY_SIZE macro in bnx2x_main.cNikitas Angelinas
Replace sizeof(bnx2x_parity_mask)/(sizeof(bnx2x_parity_mask[0]) with ARRAY_SIZE(bnx2x_parity_mask) in drivers/net/bnx2x/bnx2x_main.c Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09ipheth: remove incorrect devtype to WWANDan Williams
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets. As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: change multi-line comments styleFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: remove volatiles, switch to I/O accessorsFlorian Fainelli
Remove all the volatile keywords where they were used, switch to using the proper readl/writel accessors. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: fix asm -> linux headers inclusionFlorian Fainelli
Replace asm/io.h and asm/cpu.h wih linux/io.h and linux/cpu.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: fix bad printk usagesFlorian Fainelli
Use pr_(info|err) and pr_cont where required instead of calls to printk. Add missing pr_fmt to the driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: fix all but one "line over 80 characters warnings"Florian Fainelli
One line has not been changed because it would not improve readability. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: stylistic fixesFlorian Fainelli
This patch fixes the following checkpatch.pl warnings: - spaces after tabs - space between function and arguments - one-line statement braces - tabs instead of spaces Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09au1000-eth: typedefs removalFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09ixgbevf: remove private net_device_statsEric Dumazet
Use the net_device provided net_device_stats structure. Remove ixgbevf_get_stats() now its not needed. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-09-08KS8851: Correct RX packet allocationEric Dumazet
Use netdev_alloc_skb_ip_align() helper and do correct allocation Tested-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08atlx: make strings constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Chris Snook <chris.snook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08cxacru: ignore cx82310_eth devicesOndrej Zary
Ignore ADSL routers, which can have the same vendor and product IDs as ADSL modems but should be handled by the cx82310_eth driver. This intentionally ignores device IDs that aren't currently handled by cx82310_eth. There may be other device IDs that perhaps shouldn't be claimed by cxacru. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08ixgbevf: Removed unneeded HW struct membersGreg Rose
The VF has no flash and can only do memory mapped I/O. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08drivers/net/ixgbe/ixgbe_main.c: Add ixgbe_psumJoe Perches
Reduce indentation in a couple of places Add static function ixgbe_psum Add temporary for adapter->stats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08drivers/net/ixgbe/ixgbe_main.c: Use pr_<level>Joe Perches
Did not add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt because no printk in this module used message prefixing. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08drivers/net/ixgbe/ixgbe_main.c: Checkpatch cleanupsJoe Perches
Whitespace cleanups. Move inline keyword after function type declarations. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08ixgbe: fix TX ring enable issues seen when VMDQ is enabledAlexander Duyck
The ordering of operations was messed up in the init and as a result when VMDQ was enabled we were trying to enable TX rings before setting the VFTE bits. This resulted in a ring that appeared to fail to enable when in fact it was blocked because the VFTE bits were cleared after the reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: NAPI support for l2 and l3 disciplineFrank Blaschka
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08Kconfig: have CCWGROUP depend on CLAWMike Frysinger
Since the claw code calls ccwgroup_remove_ccwdev(), we need to make sure CCWGROUP is enabled when CLAW is enabled. Otherwise we hit fun undefined references at build time: ERROR: "ccwgroup_remove_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_probe_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_register" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_unregister" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_create_from_string" [drivers/s390/net/claw.ko] undefined! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: Use %pI6Joe Perches
Format an ipv6 address using vsprintf extensions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qdio: extend API to allow pollingJan Glauber
Extend the qdio API to allow polling in the upper-layer driver. This is needed by qeth to use NAPI. To use the new interface the upper-layer driver must specify the queue_start_poll(). This callback is used to signal the upper-layer driver that is has initiative and must process the inbound queue by calling qdio_get_next_buffers(). If the upper-layer driver wants to stop polling it calls qdio_start_irq(). Since adapter interrupts are not completely stoppable qdio implements a software bit QDIO_QUEUE_IRQS_DISABLED to safely disable interrupts for an input queue. The old interface is preserved and will be used as is by zfcp. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08e1000: fix Tx hangs by disabling 64-bit DMAJesse Brandeburg
Several users report issues with 32-bit adapters when plugged into PCI slots in machines with >= 4GB ram. In particular AMD systems with HyperTransport to PCI bridges seem to trigger the issue, but it isn't limited to only them. This issue is not easily reproducible here, yet still continues to occur in the field. For e1000 on PCI devices, just disable DMA addresses over the 4GB boundary when in PCI (not PCI-X) mode, to prevent the issue from continuing to pop up. The performance impact for this is negligible. The code was refactored to move the init of the hw struct to its own function. This allows the init to be called very early in probe, which then allows using hw-> members for this fix. A slight refactor to the DMA mask code was done for minor correctness based on the instructions in DMA-API-HOWTO. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08drivers: isdn: capi: use simple_strtol to convert numbersAndy Shevchenko
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALLBen Hutchings
niu_get_ethtool_tcam_all() assumes that its output buffer is the right size, and warns before returning if it is not. However, the output buffer size is under user control and ETHTOOL_GRXCLSRLALL is an unprivileged ethtool command. Therefore this is at least a local denial-of-service vulnerability. Change it to check before writing each entry and to return an error if the buffer is already full. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driverOndrej Zary
This patch introduces cx82310_eth driver - driver for USB ethernet port of ADSL routers based on Conexant CX82310 chips. Such routers usually have ethernet port(s) too which are bridged together with the USB ethernet port, allowing the USB-connected machine to communicate to the network (and also internet through the ADSL, of course). This is my first driver, so please check thoroughly. As there's no protocol documentation, it was done with usbsnoop dumps from Windows driver, some parts (the commands) inspired by cxacru driver and also other usbnet drivers. The driver passed my testing - some real work and also pings sized from 0 to 65507 B. The only problem I found is the ifconfig error counter. When I return 0 (or 1 but empty skb) from rx_fixup(), usbnet increases the error counter although it's not an error condition (because packets can cross URB boundaries). Maybe the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some other value, e.g. 2)? The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems using cxacru driver (they probably use the same chipset but simpler firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The driver matches only devices with class 255 and checks for the iProduct string during init. I already posted a patch for the cxacru driver to ignore these devices. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: bus speed strings should be const PCI hotplug: Fix build with CONFIG_ACPI unset PCI: PCIe: Remove the port driver module exit routine PCI: PCIe: Move PCIe PME code to the pcie directory PCI: PCIe: Disable PCIe port services during port initialization PCI: PCIe: Ask BIOS for control of all native services at once ACPI/PCI: Negotiate _OSC control bits before requesting them ACPI/PCI: Do not preserve _OSC control bits returned by a query ACPI/PCI: Make acpi_pci_query_osc() return control bits ACPI/PCI: Reorder checks in acpi_pci_osc_control_set() PCI: PCIe: Introduce commad line switch for disabling port services PCI: PCIe AER: Introduce pci_aer_available() x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs
2010-09-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: resolve confusion of MD_CHANGE_CLEAN md: don't clear MD_CHANGE_CLEAN in md_update_sb() for external arrays Move .gitignore from drivers/md to lib/raid6
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "hwrng: n2-drv - remove casts from void*" crypto: testmgr - Default to no tests crypto: testmgr - Fix test disabling option crypto: hash - Fix handling of small unaligned buffers
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) pkt_sched: Fix lockdep warning on est_tree_lock in gen_estimator ipvs: avoid oops for passive FTP Revert "sky2: don't do GRO on second port" gro: fix different skb headrooms bridge: Clear INET control block of SKBs passed into ip_fragment(). 3c59x: Remove incorrect locking; correct documented lock hierarchy sky2: don't do GRO on second port ipv4: minor fix about RPF in help of Kconfig xfrm_user: avoid a warning with some compiler net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf() pxa168_eth: fix a mdiobus leak net sched: fix kernel leak in act_police vhost: stop worker only if created MAINTAINERS: Add ehea driver as Supported ath9k_hw: fix parsing of HT40 5 GHz CTLs ath9k_hw: Fix EEPROM uncompress block reading on AR9003 wireless: register wiphy rfkill w/o holding cfg80211_mutex netlink: Make NETLINK_USERSOCK work again. irda: Correctly clean up self->ias_obj on irda_bind() failure. wireless extensions: fix kernel heap content leak ...
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: wlan-ng: Explicitly set some fields in cfg80211 interface Staging: octeon: depends on NETDEVICES Staging: spectra: depend on X86_MRST Staging: zram: free device memory when init fails Staging: rt2870sta: Add more device IDs from vendor drivers staging: comedi das08_cs.c: Fix io_req_t conversion staging: spectra needs <linux/slab.h> staging: hv: Fixed lockup problem with bounce_buffer scatter list staging: hv: Increased storvsc ringbuffer and max_io_requests staging: hv: Fixed the value of the 64bit-hole inside ring buffer staging: hv: Fixed bounce kmap problem by using correct index staging: hv: Fix missing functions for net_device_ops
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ftdi_sio: Added custom PIDs for ChamSys products USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors. USB: cdc-acm: Add pseudo modem without AT command capabilities USB: cxacru: Use a bulk/int URB to access the command endpoint usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters. USB: cdc-acm: Adding second ACM channel support for various Nokia and one Samsung phones usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P. USB: ssu100: turn off debug flag usb: allow drivers to use allocated bandwidth until unbound USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile. USB: cp210x: Add B&G H3000 link cable ID USB: CP210x Add new device ID USB: option: fix incorrect novatel entries USB: Fix kernel oops with g_ether and Windows USB: rndis: section mismatch fix USB: ehci-ppc-of: problems in unwind USB: s3c-hsotg: Remove DEBUG define
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix tty_line must not be equal to number of allocated tty pointers in tty driver serial: bfin_sport_uart: restore transmit frame sync fix serial: fix port type conflict between NS16550A & U6_16550A MAINTAINERS: orphan isicom vt: Fix console corruption on driver hand-over.
2010-09-07Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: do not oops when erroneous PEB is scheduled for scrubbing UBI: fix kconfig unmet dependency UBI: fix forward compatibility UBI: eliminate update of list_for_each_entry loop cursor
2010-09-07Merge branch 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intelLinus Torvalds
* 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intel: (25 commits) intel_agp,i915: Add more sandybridge graphics device ids drm/i915: Enable MI_FLUSH on Sandybridge agp/intel: Fix cache control for Sandybridge agp/intel: use #ifdef idiom for intel-agp.h agp/intel: fix physical address mask bits for sandybridge drm/i915: Prevent double dpms on drm/i915: Avoid use of uninitialised values when disabling panel-fitter drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt drm/i915: Tightly scope intel_encoder to prevent invalid use drm/i915: Allocate the PCI resource for the MCHBAR drm/i915/dp: Really try 5 times before giving up. drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOS drm/i915/dp: Boost timeout for enabling transcoder to 100ms drm/i915: Re-use set_base_atomic to share setting of the display registers drm/i915: Fix offset page-flips on i965+ drm/i915: Include a generation number in the device info i915: return -EFAULT if copy_to_user fails i915: return -EFAULT if copy_to_user fails agp/intel: Promote warning about failure to setup flush to error. drm/i915: overlay on gen2 can't address above 1G ...
2010-09-07via-velocity: Turn scatter-gather support back off.David S. Miller
It causes all kinds of DMA API debugging assertions and all straight-forward attempts to fix it have failed. So turn off SG, and we'll tackle making this work properly in net-next-2.6 Reported-by: Dave Jones <davej@redhat.com> Tested-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07PATCH: b44 Handle RX FIFO overflow better (simplified)Mark Lord
This patch is a simplified version of the original patch from James Courtier-Dutton. >From: James Courtier-Dutton >Subject: [PATCH] Fix b44 RX FIFO overflow recovery. >Date: Wednesday, June 30, 2010 - 1:11 pm > >This patch improves the recovery after a RX FIFO overflow on the b44 >Ethernet NIC. >Before it would do a complete chip reset, resulting is loss of link >for a few seconds. >This patch improves this to do recovery in about 20ms without loss of link. > >Signed off by: James@superbug.co.uk Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-073c59x: Fix deadlock in vortex_error()Ben Hutchings
This fixes a bug introduced in commit de847272149365363a6043a963a6f42fb91566e2 "3c59x: Use fine-grained locks for MII and windowed register access". vortex_interrupt() holds vp->window_lock over multiple register accesses to reduce locking overhead. However it also needs to call vortex_error() sometimes, and that uses the regular functions for access to windowed registers, which will try to acquire window_lock again. Therefore, drop window_lock around the call to vortex_error() and set the window afterward reacquiring the lock. Since vortex_error() may call vortex_rx(), which *does* require its caller to hold window_lock, lift that call up into vortex_interrupt(). This also removes the potential for calling vortex_rx() on a later-generation NIC. Reported-and-tested-by: Jens Schüßler <jgs@trash.net> [in Debian's 2.6.32] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07bonding: Fix jiffies overflow problems (again)Jiri Bohac
The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07stmmac: fix sleep inside atomicGiuseppe Cavallaro
We cannot use spinlock when kmalloc is invoked with GFP_KERNEL flag because it can sleep. So this patch reviews the usage of spinlock within the stmmac_resume function avoing this bug. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07r8169: add gro supportEric Dumazet
- Use napi_gro_receive() and vlan_gro_receive() - Enable GRO by default Tested on a RTL8111/8168 adapter Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07bnx2x: Update bnx2x version to 1.52.53-6Yaniv Rosner
Note that the date format was fixed. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-23 04:42:09 +0000