| Age | Commit message (Collapse) | Author |
|---|
|
Simplify the code and make the output format consistent with other RTC
drivers by standardizing on using the %ptR printf extension.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-6-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
These instances of '&client->dev' might as well be spelled 'dev', since
'client' has been computed from 'dev' via 'client =
to_i2c_client(dev)'.
Later patches will get rid of that local variable 'client', so remove
these unnecessary references so those later patches become easier to
read.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-5-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This dev_info() seems to be a debug leftover, and it would only get
printed once (or, once per battery change).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-4-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The isl12022 can (only) keep track of times in the range
2000-2099. The data sheet says
The calendar registers track date, month, year, and day of the week
and are accurate through 2099, with automatic leap year correction.
The lower bound of 2000 is obtained by simply observing that its YR
register only counts from 00 through 99.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-3-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The comments say that devm_rtc_device_register() is deprecated and
that one should instead use devm_rtc_allocate_device() and
[devm_]rtc_register_device. So do that.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220921114624.3250848-2-linux@rasmusvillemoes.dk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use platform_device_put() to free platform device before print
error message when platform_device_add() fails to run.
Fixes: 1a71fb84fda6 ("rtc: stmp3xxx: add wdt-accessor function")
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20220915065253.43668-1-linyujun809@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code, the error handling paths and avoid the need of
a dedicated function used with devm_add_action_or_reset().
Based on my test with allyesconfig, this reduces the .o size from:
text data bss dec hex filename
6705 1968 0 8673 21e1 drivers/rtc/rtc-mxc.o
down to:
6212 1968 0 8180 1ff4 drivers/rtc/rtc-mxc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1b5ad1877304b01ddbba73ca615274a52f781aa2.1660582728.git.christophe.jaillet@wanadoo.fr
|
|
This register would fail to be reset if reading the RTC bias failed for
whichever reason. This commit reorganises the code around to
unconditionally write it back to its previous value, unmap it, and
return the result of regmap_read(), which makes it both simpler and more
correct in the error case.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220823130702.1046-1-linkmauve@linkmauve.fr
|
|
To allow new SoCs to use this device without a new compatible string,
use a soc_device_attribute list to define all SoCs affected by the TI
i2327 erratum and require help from their bootloaders to unlock this
device.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220816173312.23243-2-bb@ti.com
|
|
After writing the magic words to the KICK0 and KICK1 registers, we must
wait for a 1 in the unlock field of the general control register to
signify when the rtc device is in an unlocked state.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220816173312.23243-1-bb@ti.com
|
|
During boot, the driver prints out a stray carriage return character.
Remove it, together with the preceding space character.
While at it, change prescaler to "unsigned long", as returned by
clk_get_rate(), to avoid truncating very large clock rates, and update
the format specifiers.
Fixes: 0b31d703598dc199 ("rtc: Add driver for Microchip PolarFire SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/bce2ca405ef96b1363fd1370887409d9e8468422.1660659437.git.geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- two driver fixes for issues introduced this cycle
- one trivial driver improvement regarding ACPI
- more DTS conversion and additions
- documentation updates
- subsystem-wide move from strlcpy to strscpy
* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: i2c-sysfs: fix hyperlinks
docs: i2c: i2c-sysfs: improve wording
docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
docs: i2c: i2c-protocol: remove unused legend items
docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
docs: i2c: i2c-protocol: update introductory paragraph
i2c: move core from strlcpy to strscpy
i2c: move drivers from strlcpy to strscpy
i2c: kempld: Support ACPI I2C device declaration
i2c: mediatek: add i2c compatible for MT8188
dt-bindings: i2c: update bindings for mt8188 soc
i2c: microchip-corei2c: fix erroneous late ack send
dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
i2c: qcom-geni: Fix GPI DMA buffer sync-back
|
|
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"New drivers:
- Microchip PolarFire
- Nuvoton NCT3018Y
- TI K3 RTC
Subsystem:
- Replace flush_scheduled_work() with flush_work()
- Remove deprecated ida_simple_get()/ida_simple_remove() calls
Drivers:
- use simple i2c probe where possible
- sun6i: add R329 support
- zynqmp: add calibration support
- vr41xx: remove unused driver"
* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: spear: set range max
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: zynqmp: initialize fract_tick
rtc: Add NCT3018Y real time clock driver
dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
rtc: vr41xx: remove driver
rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
rtc: rv8803: fix missing unlock on error in rv8803_set_time()
rtc: zynqmp: Add calibration set and get support
rtc: zynqmp: Updated calibration value
dt-bindings: rtc: zynqmp: Add clock information
rtc: sun6i: add support for R329 RTC
rtc: Directly use ida_alloc()/free()
rtc: Introduce ti-k3-rtc
dt-bindings: rtc: Add TI K3 RTC description
dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
...
|
|
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"No core patches, only driver updates:
- pwr-mlxbf: new reset driver for Mellanox BlueField
- at91-reset: SAMA7G5 support
- ab8500: continue refurbishing
- misc minor fixes"
* tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node
power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind
power: supply: ab8500: Remove flush_scheduled_work() call.
power: supply: ab8500_fg: drop duplicated 'is' in comment
power: supply: ab8500: Drop external charger leftovers
power: supply: ab8500: Add MAINTAINERS entry
dt-bindings: power: reset: qcom,pshold: convert to dtschema
power: supply: Fix typo in power_supply_check_supplies
power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
power: reset: pwr-mlxbf: add missing include
power: reset: at91-reset: add support for SAMA7G5
power: reset: at91-reset: add reset_controller_dev support
power: reset: at91-reset: add at91_reset_data
power: reset: at91-reset: document structures and enums
dt-bindings: reset: add sama7g5 definitions
dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
power: reset: pwr-mlxbf: add BlueField SoC power control driver
power: supply: ab8500: Exit maintenance if too low voltage
power: supply: ab8500: Respect charge_restart_voltage_uv
...
|
|
Pull another VFIO update from Alex Williamson:
- Rename vfio source file to more easily allow additional source
files in the upcoming development cycles (Jason Gunthorpe)
* tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio:
vfio: Move vfio.c to vfio_main.c
|
|
A series of mostly-independent fixes and cleanups for the RISC-V PMU
drivers.
Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2
* palmer/riscv-pmu:
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
|
|
The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220811120918.17961-1-wangborong@cdjrlc.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This code tries to store -EFAULT in an unsigned int. The
xenbus_file_read() function returns type ssize_t so the negative value
is returned as a positive value to the user.
This change forces another change to the min() macro. Originally, the
min() macro used "unsigned" type which checkpatch complains about. Also
unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use
size_t for the min(). (No effect on runtime for the min_t() change).
Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c68
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Persistent grants feature can be used only when both backend and the
frontend supports the feature. The feature was always supported by
'blkback', but commit aac8a70db24b ("xen-blkback: add a parameter for
disabling of persistent grants") has introduced a parameter for
disabling it runtime.
To avoid the parameter be updated while being used by 'blkback', the
commit caches the parameter into 'vbd->feature_gnt_persistent' in
'xen_vbd_create()', and then check if the guest also supports the
feature and finally updates the field in 'connect_ring()'.
However, 'connect_ring()' could be called before 'xen_vbd_create()', so
later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to
'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use
'persistent grants' feature even if the guest doesn't support the
feature.
This commit fixes the issue by moving the parameter value caching to
'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct
embeds 'vbd' object, which will be used by 'connect_ring()' later, this
should be called before 'connect_ring()' and therefore this should be
the right and safe place to do the caching.
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in
order to set the per-vCPU event channel vector callback on Linux and
use it in preference of HVM_PARAM_CALLBACK_IRQ.
If the per-VCPU vector setup is successful on BSP, use this method
for the APs. If not, fallback to the global vector-type callback.
Also register callback_irq at per-vCPU event channel setup to trick
toolstack to think the domain is enlightened.
Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- A few fixes for the DM verity and bufio changes in this merge window
- A smatch warning fix for DM writecache locking in writecache_map
* tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix some cases where the code sleeps with spinlock held
dm writecache: fix smatch warning about invalid return from writecache_map
dm verity: fix verity_parse_opt_args parsing
dm verity: fix DM_VERITY_OPTS_MAX value yet again
dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking
|
|
Pull drm fixes from Dave Airlie:
"Not much to squeeze into rc1, just two small fixes, one for core gem
and one for shmem-helpers:
gem:
- Annotate WW context in error paths
shmem-helper:
- Add missing vunmap in error paths"
* tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
drm/shmem-helper: Add missing vunmap on error
|
|
Counter info encoding format is defined by the SBI specificaiton.
KVM implementation of SBI PMU extension will also leverage this definition.
Move the definition to common sbi header file from the sbi pmu driver.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Some of the SBI PMU calls does not pass 64bit arguments
correctly and not under RV32 compile time flags. Currently,
this doesn't create any incorrect results as RV64 ignores
any value in the additional register and qemu doesn't support
raw events.
Fix those SBI calls in order to set correct values for RV32.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, riscv_pmu_event_set_period updates the userpage mapping.
However, the caller of riscv_pmu_event_set_period should update
the userpage mapping because the counter can not be updated/started
from set_period function in counter overflow path.
Invoke the perf_event_update_userpage at the caller so that it
doesn't get invoked twice during counter start path.
Fixes: f5bfa23f576f ("RISC-V: Add a perf core library for pmu drivers")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pass the upper half of the initial value of the counter correctly
for RV32.
Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220711174632.4186047-2-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This series implements Sstc extension support which was ratified
recently. Before the Sstc extension, an SBI call is necessary to
generate timer interrupts as only M-mode have access to the timecompare
registers. Thus, there is significant latency to generate timer
interrupts at kernel. For virtualized enviornments, its even worse as
the KVM handles the SBI call and uses a software timer to emulate the
timecomapre register.
Sstc extension solves both these problems by defining a
stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to
program a timer and recieve interrupt without supervisor execution
enviornment (M-mode/HS mode) intervention.
* palmer/riscv-sstc:
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
|
|
RISC-V ISA has sstc extension which allows updating the next clock event
via a CSR (stimecmp) instead of an SBI call. This should happen dynamically
if sstc extension is available. Otherwise, it will fallback to SBI call
to maintain backward compatibility.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Follow the advice of the below link and prefer 'strscpy'. Conversion is
easy because no code used the return value. It has been done with a
simple sed invocation.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy'. Conversion is
easy because no driver used the return value and has been done with a
simple sed invocation.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Adds an ACPI companion to the KEMPLD I2C driver so that it correctly
detects any I2C devices nested under the KEMPLD's ACPI node (SBRG.CPLD).
This allows I2C devices attached to the KEMPLD I2C adapter to be declared
and instantiated via ACPI.
Signed-off-by: Chris Pringle <chris.pringle@phabrix.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since
MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix up direct references to the fwnode field in struct device
and extend ACPI device properties support.
Specifics:
- Replace direct references to the fwnode field in struct device with
dev_fwnode() and device_match_fwnode() (Andy Shevchenko)
- Make the ACPI code handling device properties support properties
with buffer values (Sakari Ailus)"
* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: VIOT: Do not dereference fwnode in struct device
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* gem: Annotate WW context in error paths
* shmem-helper: Add missing vunmap in error paths
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YvOLPpufsvOJHiNY@linux-uq9g
|
|
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
|
|
We should trace the allocated address instead of page struct.
Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- changes to input core to properly queue synthetic events (such as
autorepeat) and to release multitouch contacts when an input device
is inhibited or suspended
- reworked quirk handling in i8042 driver that consolidates multiple
DMI tables into one and adds several quirks for TUXEDO line of
laptops
- update to mt6779 keypad to better reflect organization of the
hardware
- changes to mtk-pmic-keys driver preparing it to handle more variants
- facelift of adp5588-keys driver
- improvements to iqs7222 driver
- adjustments to various DT binding documents for input devices
- other assorted driver fixes.
* tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: adc-joystick - fix ordering in adc_joystick_probe()
dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml
Input: deactivate MT slots when inhibiting or suspending devices
Input: properly queue synthetic events
dt-bindings: input: iqs7222: Use central 'linux,code' definition
Input: i8042 - add dritek quirk for Acer Aspire One AO532
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: input: gpio-keys: reference input.yaml and document properties
dt-bindings: input: gpio-keys: enforce node names to match all properties
dt-bindings: input: Convert adc-keys to DT schema
dt-bindings: input: Centralize 'linux,input-type' definition
dt-bindings: input: Use common 'linux,keycodes' definition
dt-bindings: input: Centralize 'linux,code' definition
dt-bindings: input: Increase maximum keycode value to 0x2ff
Input: mt6779-keypad - implement row/column selection
Input: mt6779-keypad - match hardware matrix organization
Input: i8042 - add additional TUXEDO devices to i8042 quirk tables
Input: goodix - switch use of acpi_gpio_get_*_resource() APIs
Input: i8042 - add TUXEDO devices to i8042 quirk tables
Input: i8042 - add debug output for quirks
...
|
|
area_cache_get() is used to distribute cache->area and set cache->id,
and if cache->id is not 0 and cache->area->kref refcount is 0, it will
release the cache->area by nfp_cpp_area_release(). area_cache_get()
set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().
But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
is already set but the refcount is not increased as expected. At this
time, calling the nfp_cpp_area_release() will cause use-after-free.
To avoid the use-after-free, set cache->id after area_init() and
nfp_cpp_area_acquire() complete successfully.
Note: This vulnerability is triggerable by providing emulated device
equipped with specified configuration.
BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1
Call Trace:
<TASK>
nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)
Allocated by task 1:
nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)
Freed by task 1:
kfree (mm/slub.c:4562)
area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
Signed-off-by: Jialiang Wang <wangjialiang0806@163.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop devl_lock() / devl_unlock() from ports creation and removal flows
since the devlink instance lock is now taken by mlxsw_core.
Fixes: 72a4c8c94efa ("mlxsw: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d5410ac7b0ba ("net:bonding:support balance-alb interface
with vlan to bridge") introduced a reference count leak by not releasing
the reference acquired by ip_dev_find(). Remedy this by insuring the
reference is released.
Fixes: d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/26758.1660194413@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
