aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-04-17[media] omap3isp: resizer: Improved resizer rsz factor formulaSakari Ailus
Round properly the rsz factor so that we get highest rsz so that the input width (or height) is highest possible smaller or equal to what the user asks. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-17[media] omap3isp: resizer: Use 4-tap mode equations when the ratio is <= 512Laurent Pinchart
As the number of phases/taps, used to select the correct equations to compute the ratio, depends on the ratio, start with the 7-tap mode equations to compute an approximation of the ratio, and switch to the 4-tap mode equations if the approximation is lower than or equal to 512. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] omap3isp: resizer: Center the crop rectangleLaurent Pinchart
When the crop rectangle needs to be modified to match hardware requirements, center the resulting rectangle on the requested rectangle instead of removing pixels from the right and bottom sides only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] V4L: mx3_camera: select VIDEOBUF2_DMA_CONTIG instead of ↵Uwe Kleine-König
VIDEOBUF_DMA_CONTIG Since commit 379fa5d ([media] V4L: mx3_camera: convert to videobuf2) mx3_camera uses videobuf2, but that commit didn't upgrade the select resulting in the following build failure: drivers/built-in.o: In function `mx3_camera_init_videobuf': clkdev.c:(.text+0x86580): undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `mx3_camera_probe': clkdev.c:(.devinit.text+0x3548): undefined reference to `vb2_dma_contig_init_ctx' clkdev.c:(.devinit.text+0x3578): undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `mx3_camera_remove': clkdev.c:(.devexit.text+0x674): undefined reference to `vb2_dma_contig_cleanup_ctx' make[2]: *** [.tmp_vmlinux1] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] sh_mobile_csi2: fix module reloadingGuennadi Liakhovetski
If the camera host driver (sh_mobile_ceu_camera.c) is unloaded and then reloaded, probe will fail, because camera client .set_bus_param() and .query_bus_param() methods have been set to NULL. Fix this by caching the original pointers and restoring them on driver-unbind. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: don't dereference I2C client after it has been removedGuennadi Liakhovetski
i2c_unregister_device() frees the I2C client, so, dereferencing it afterwards is a bug, that leads to Oopses. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] imx074: return a meaningful error code instead of -1Guennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] soc-camera: fix a recent multi-camera breakage on sh-mobileGuennadi Liakhovetski
With the introduction of CSI2 support on sh-mobile, the host driver switched to using v4l2_device_call_until_err() with grp_id == 0 to call subdev operations on the sensor and the CSI2 subdev. However, this has broken multi-client set ups like the one on migor, because that way all operations get called on both clients. To fix this add a grp_id and set it to the client private context. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix an error messageGuennadi Liakhovetski
buf->size is not yet initialised in videobuf2-dma-contig at the time of the error message, use "size." Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] videobuf2: fix core to correctly identify allocation failuresGuennadi Liakhovetski
The videobuf2-dma-contig allocator returns an ERR_PTR() on failure, not a NULL like all other allocators. Fix videobuf2-core to also correctly recognise those failures. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-13[media] cx18: Fix list BUG for IDX stream, triggerable in cx18_probe() error ↵Andy Walls
clean up, If allocating stream buffers for one of the primary streams (e.g. YUV) failed during card probe, the error path clean up would try to manipulate the yet unitialized IDX stream structures. This caused a BUG due to unitialized list heads. Detect that case and ignore the uninitialized IDX stream. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] Fix dependencies for Technisat USB2.0 DVB-S/S2Patrick Boettcher
Device is based on STV0903 demod and STV6110x tuner Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] dib0700: fix possible NULL pointer dereferencePatrick Boettcher
Seems like 'adap->fe' test for NULL was meant to be before we dereference that pointer. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pciPatrick Boettcher
This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Steffen Barszus <steffenbpunkt@googlemail.com> Cc: Boris Cuber <me@boris64.net> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04[media] DIB0700: fix typo in dib0700_devices.cPatrick Boettcher
Fix typo introduced in b4d6046e841955be9cc49164b03b91c9524f9c2e. Spotted by Dr. David Alan Gilbert. Thanks for that. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] radio: wl128x: Update registration process with ST [media] staging: altera-jtag needs delay.h
2011-04-04Merge branch 'unicore32' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32 * 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it floatable unicore32 core architecture: remove duplicated #include unicore32 rtc driver fix: cleanup irq_set_freq and irq_set_state unicore32 fix: remove arch-specific futex support unicore32 ldscript fix: add cacheline parameter to PERCPU() macro
2011-04-04Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modalias
2011-04-04rtc-mrst: Fix section typesMajor Lee
Fix the following section mismatch warning. WARNING: drivers/rtc/built-in.o(.data+0xa0): Section mismatch in reference from the variable vrtc_mrst_platform_driver to the function .init.text:vrtc_mrst_platform_probe() The variable vrtc_mrst_platform_driver references the function __init vrtc_mrst_platform_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Major Lee <major_lee@wistron.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-02unicore32 framebuffer fix: get videomemory by __get_free_pages() and make it ↵Guan Xuetao
floatable 1. get videomemory by __get_free_pages() in fb-puv3.c 2. remove resource reservation for old fixed UNIGFX_MMAP & UVC_MMAP space 3. remove unused macros: PKUNTIY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE, PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE and KUSER_UNIGFX_BASE 4. remove unused header linux/vmalloc.h in fb-puv3.h Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-04-01Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: kdump: Allow shrinking of kdump region to be overridden powerpc/pmac/smp: Remove no-longer needed preempt workaround powerpc/smp: Increase vdso_data->processorCount, not just decrease it powerpc/smp: Create idle threads on demand and properly reset them powerpc/smp: Don't expose per-cpu "cpu_state" array powerpc/pmac/smp: Fix CPU hotplug crashes on some machines powerpc/smp: Add a smp_ops->bringup_up() done callback powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collision powerpc/pmac/smp: Properly NAP offlined CPU on G5 powerpc/pmac/smp: Remove HMT changes for PowerMac offline code powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one file powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bit powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32 powerpc/pmac/smp: Fix 32-bit PowerMac cpu_die powerpc/smp: Remove unused smp_ops->cpu_enable() powerpc/smp: Remove unused generic_cpu_enable() powerpc/smp: Fix generic_mach_cpu_die() powerpc/smp: soft-replugged CPUs must go back to start_secondary powerpc: Make decrementer interrupt robust against offlined CPUs
2011-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Pass task_struct to schedule_tail() in ret_from_fork apbuart: Depend upon sparc. sparc64: Fix section mis-match errors. sparc32,leon: Fixed APBUART frequency detection sparc32, leon: APBUART driver must use archdata to get IRQ number sparc: Hook up syncfs system call.
2011-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: appletalk: Fix OOPS in atalk_release(). mlx4: Fixing bad size of event queue buffer mlx4: Fixing use after free bonding:typo in comment sctp: Pass __GFP_NOWARN to hash table allocation attempts. connector: convert to synchronous netlink message processing fib: add rtnl locking in ip_fib_net_exit atm/solos-pci: Don't flap VCs when carrier state changes atm/solos-pci: Don't include frame pseudo-header on transmit hex-dump atm/solos-pci: Use VPI.VCI notation uniformly. Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom netdev: fix mtu check when TSO is enabled net/usb: Ethernet quirks for the LG-VL600 4G modem phylib: phy_attach_direct: phy_init_hw can fail, add cleanup bridge: mcast snooping, fix length check of snooped MLDv1/2 via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent() via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variable net: gre: provide multicast mappings for ipv4 and ipv6 bridge: Fix compilation warning in function br_stp_recalculate_bridge_id() net: Fix warnings caused by MAX_SKB_FRAGS change.
2011-04-01powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collisionBenjamin Herrenschmidt
This collides with the cpu_state in our SMP code, use processor_state instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-31[media] radio: wl128x: Update registration process with STManjunatha Halli
As underlying ST driver registration API's have changed with latest 2.6.38-rc8 kernel this patch will update the FM driver accordingly. Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-31[media] staging: altera-jtag needs delay.hRandy Dunlap
altera-jtag.c needs to include <linux/delay.h> to fix a build error: drivers/staging/altera-stapl/altera-jtag.c:398: error: implicit declaration of function 'udelay' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-31mlx4: Fixing bad size of event queue bufferYevgeny Petrilin
We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31mlx4: Fixing use after freeYevgeny Petrilin
In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31bonding:typo in commentPeter Pan(潘卫平)
use accumulates instead of acumulates. Signed-off-by: Pan Weiping <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30apbuart: Depend upon sparc.David S. Miller
It absolutely needs to be able to get at pdev_archdata members which are sparc specific. Signed-off-by: David S. Miller <davem@davemloft.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2011-03-30connector: convert to synchronous netlink message processingPatrick McHardy
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30atm/solos-pci: Don't flap VCs when carrier state changesPhilip A. Prindeville
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30atm/solos-pci: Don't include frame pseudo-header on transmit hex-dumpPhilip A. Prindeville
Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30atm/solos-pci: Use VPI.VCI notation uniformly.Philip A. Prindeville
Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: avr32: Fix missing irq namespace conversion powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip genirq: Remove the now obsolete config options and select statements arm: versatile : Fix typo introduced in irq namespace cleanup sound: Fixup the last user of the old irq functions genirq: Remove obsolete comment genirq: Remove now obsolete set_irq_wake() sh: Fix irq cleanup fallout x86: apb_timer: Fixup genirq fallout genirq: Fix misnamed label in handle_edge_eoi_irq Fix up crazy conflict in arch/powerpc/include/asm/qe_ic.h: - commit eead4d5c63ff ("powerpc: qe_ic: Rename get_irq_desc_data and get_irq_desc_chip") made the helper functions use irq_desc_get_handler_data() instead of the legacy (and no longer existing) get_irq_desc_data. - commit d4db35e8dc96 ("powerpc/qe_ic: Fix another breakage from the irq_data conversion") used irq_desc_get_chip_data() instead. According to Thomas, the former is the correct direct conversion, but it does look like both should work (arch/powerpc/sysdev/qe_lib/qe_ic.c seems to initialize both to the same thing), and the chip data in some ways is the more logical. Somebody should really decide on one of the other. This merge picks irq_desc_get_handler_data() as the straightforward pure conversion to new names, as per Thomas.
2011-03-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits) ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support ARM: 6838/1: etm: fix section mismatch warning ARM: 6837/1: remove unused pci_fixup_prpmc1100 ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC Fix the broken build for Marvell Dove platform. ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARM: 6833/1: perf: add required isbs() to ARMv7 backend ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile arm: mach-mx3: pcm043: add write-protect and card-detect for SD1 eukrea_mbimxsd51: add SD Card detect eukrea_mbimxsd25-baseboard: add SD card detect mx3/eukrea_mbimxsd-baseboard: add SD card detect support mx3/eukrea_mbimxsd-baseboard: fix gpio request ARM: mxs/mx28evk: add mmc device ARM: mxs/mx23evk: add mmc device ARM: mxs: dynamically allocate mmc device ARM: mx51_efika: update platform data for new mfd changes mx2/iomux: Set direction for CSPI2 pins ...
2011-03-30sparc32,leon: Fixed APBUART frequency detectionDaniel Hellstrom
The UARTs may be located on different APB buses, thus have different UART clock frequency. The system frequency is not the same (but often) as the UART frequency, rather the APB bus frequency that the APBUART is located at has the same frequency, so this looks at the "freq" property instead. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30sparc32, leon: APBUART driver must use archdata to get IRQ numberDaniel Hellstrom
See Commit id 1636f8ac2b08410df4766449f7c86b912443cd99 (sparc/of: Move of_device fields into struct pdev_archdata), this patch is similar to 19e4875fb21a69fbf620e84769a74d189c69c58d (of/sparc: fix build regression from of_device changes) Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30Atheros, atl2: Fix mem leaks in error paths of atl2_set_eepromJesper Juhl
We leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom(). The memory allocated to 'eeprom_buff' is not freed when we return -EIO. This patch fixes that up and also removes a pointless explicit cast. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/usb: Ethernet quirks for the LG-VL600 4G modemAndrzej Zaborowski
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30phylib: phy_attach_direct: phy_init_hw can fail, add cleanupMarc Kleine-Budde
The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()Ben Hutchings
via-ircc has been passing a NULL pointer to DMA allocation functions, which is completely invalid and results in a BUG on PowerPC. Now that we always have the device pointer available, pass it in. Reference: http://bugs.debian.org/619450 Reported-by: Andrew Buckeridge <andrewb@bgc.com.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Andrew Buckeridge <andrewb@bgc.com.au> [against 2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variableBen Hutchings
via-ircc still maintains its own array of device pointers in Linux 2.4 style. Worse, it always uses index 0, so it will crash if there are multiple suitable devices in the system. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modaliasAxel Lin
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-30sh: Fix irq cleanup falloutThomas Gleixner
I missed that coccinelle does not fix up header files by default. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <lethal@linux-sh.org>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29Merge branch 'stable/bug-fixes-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Use new irq_move functions xen: Convert genirq namespace xen: fix p2m section mismatches xen/p2m: Allocate p2m tracking pages on override xen-gntdev: unlock on error path in gntdev_mmap() xen-gntdev: return -EFAULT on copy_to_user failure
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry watchdog: fix nv_tco section mismatch watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. watchdog: Convert release_resource to release_region/release_mem_region watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
2011-03-29Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix potential memleak
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 13:31:10 +0000