aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-23bnx2x: Use the correct divisor value for PHC clock readings.Sudarsana Reddy Kalluru
Time Sync (PTP) implementation uses the divisor/shift value for converting the clock ticks to nanoseconds. Driver currently defines shift value as 1, this results in the nanoseconds value to be calculated as half the actual value. Hence the user application fails to synchronize the device clock value with the PTP master device clock. Need to use the 'shift' value of 0. Signed-off-by: Sony.Chacko <Sony.Chacko@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Fix incorrrect usage of APIs for un-mapping DMA memoryManish Chopra
Driver uses incorrect APIs to unmap DMA memory which were mapped using dma_map_single(). This patch fixes it to use appropriate APIs for un-mapping DMA memory. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qed: Zero-out the buffer paased to dcbx_query() APISudarsana Reddy Kalluru
qed_dcbx_query_params() implementation populate the values to input buffer based on the dcbx mode and, the current negotiated state/params, the caller of this API need to memset the buffer to zero. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Reconfigure rss indirection direction table when rss count is updatedSudarsana Reddy Kalluru
Rx indirection table entries are in the range [0, (rss_count - 1)]. If user reduces the rss count, the table entries may not be in the ccorrect range. Need to reconfigure the table with new rss_count as a basis. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qed*: Reduce the memory footprint for Rx pathSudarsana Reddy Kalluru
With the current default values for Rx path i.e., 8 queues of 8Kb entries each with 4Kb size, interface will consume 256Mb for Rx. The default values causing the driver probe to fail when the system memory is low. Based on the perforamnce results, rx-ring count value of 1Kb gives the comparable performance with Rx coalesce timeout of 12 seconds. Updating the default values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Loopback implementation should ignore the normal trafficSudarsana Reddy Kalluru
During the execution of loopback test, driver may receive the packets which are not originated by this test, loopback implementation need to skip those packets. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: Do not allow RSS config for 100G devicesSudarsana Reddy Kalluru
RSS configuration is not supported for 100G adapters. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22qede: get_channels() need to populate max tx/rx coalesce valuesSudarsana Reddy Kalluru
Recent changes in kernel ethtool implementation requires the driver callback for get_channels() has to populate the values for max tx/rx coalesce fields. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-22net: dsa: bcm_sf2: Do not rely on kexec_in_progressFlorian Fainelli
After discussing with Eric, it turns out that, while using kexec_in_progress is a nice optimization, which prevents us from always powering on the integrated PHY, let's just turn it on in the shutdown path. This removes a dependency on kexec_in_progress which, according to Eric should not be used by modules Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernelsFlorian Fainelli
For a kernel that is being kexec'd we re-enable the integrated GPHY in order for the subsequent MDIO bus scan to succeed and properly bind to the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut down by the time the MDIO driver is probing the bus, and it would fail to read the correct PHY OUI and therefore bind to an appropriate PHY driver. Later on, this would cause DSA not to be able to successfully attach to the PHY, and the interface would not be created at all. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20stmmac: display the descriptors if DES0 = 0Giuseppe CAVALLARO
It makes sense to display the descriptors even if DES0 is zero. This helps for example in case of it is needed to dump rx write-back descriptors to get timestamp status. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: pci: Fix reset wait for SwitchX2Jiri Pirko
SwitchX2 firmware does not implement reset done yet. Moreover, when busy-polled for ready magic, that slows down firmware and reset takes longer than the defined timeout, causing initialization to fail. So restore the previous behaviour and just sleep in this case. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: switchx2: Fix ethernet port initializationElad Raz
When creating an ethernet port fails, we must move the port to disable, otherwise putting the port in switch partition 0 (ETH) or 1 (IB) will always fails. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Make mlxsw_sp_router_fib4_del return void and remove ↵Jiri Pirko
warn The function return value is not checked anywhere. Also, the warning causes huge slowdown when removing large number of FIB entries which were not offloaded, because of ordering issue. Ido's preparing a patchset to fix the ordering issue, but that is definitelly not net tree material. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20mlxsw: spectrum_router: Use correct tree index for bindingJiri Pirko
By a mistake, there is tree index 0 passed to RALTB. Should be MLXSW_SP_LPM_TREE_MIN. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Reported-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19stmmac: fix and review the ptp registration.Giuseppe CAVALLARO
The commit commit 7086605a6ab5 ("stmmac: fix error check when init ptp") breaks the procedure added by the commit efee95f42b5d ("ptp_clock: future-proofing drivers against PTP subsystem becoming optional") So this patch tries to re-import the logic added by the latest commit above: it makes sense to have the stmmac_ptp_register as void function and, inside the main, the stmmac_init_ptp can fails in case of the capability cannot be supported by the HW. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nicolas Pitre <nico@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18qed: Use list_move_tail instead of list_del/list_add_tailWei Yongjun
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18rocker: fix maybe-uninitialized warningArnd Bergmann
In some rare configurations, we get a warning about the 'index' variable being used without an initialization: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function ‘ofdpa_port_fib_ipv4.isra.16.constprop’: drivers/net/ethernet/rocker/rocker_ofdpa.c:2425:92: warning: ‘index’ may be used uninitialized in this function [-Wmaybe-uninitialized] This is a false positive, the logic is just a bit too complex for gcc to follow here. Moving the intialization of 'index' a little further down makes it clear to gcc that the function always returns an error if it is not initialized. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net/hyperv: avoid uninitialized variableArnd Bergmann
The hdr_offset variable is only if we deal with a TCP or UDP packet, but as the check surrounding its usage tests for skb_is_gso() instead, the compiler has no idea if the variable is initialized or not at that point: drivers/net/hyperv/netvsc_drv.c: In function ‘netvsc_start_xmit’: drivers/net/hyperv/netvsc_drv.c:494:42: error: ‘hdr_offset’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an additional check for the transport type, which tells the compiler that this path cannot happen. Since the get_net_transport_info() function should always be inlined here, I don't expect this to result in additional runtime checks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: bcm63xx: avoid referencing uninitialized variableArnd Bergmann
gcc found a reference to an uninitialized variable in the error handling of bcm_enet_open, introduced by a recent cleanup: drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open' drivers/net/ethernet/broadcom/bcm63xx_enet.c:1129:2: warning: 'phydev' may be used uninitialized in this function [-Wmaybe-uninitialized] This makes the use of that variable conditional, so we only reference it here after it has been used before. Unlike my normal patches, I have not build-tested this one, as I don't currently have mips test in my randconfig setup. Fixes: 625eb8667d6f ("net: ethernet: broadcom: bcm63xx: use phydev from struct net_device") Cc: Philippe Reynes <tremyfr@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ibmvnic: Update MTU after device initializationThomas Falcon
It is possible for the MTU to be changed during the initialization process with the VNIC Server. Ensure that the net device is updated to reflect the new MTU. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ibmvnic: Fix GFP_KERNEL allocation in interrupt contextThomas Falcon
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ibmvnic: Driver Version 1.0.1Thomas Falcon
Increment driver version to reflect features that have been added since release. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18cxgb4: Fix number of queue sets corssing the limitGanesh Goudar
Do not let number of offload queue sets to go more than MAX_OFLD_QSETS, which would otherwise crash the driver on machines with cores more than MAX_OFLD_QSETS. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18dwc_eth_qos: enable flow control by defaultNiklas Cassel
Allow autoneg to enable flow control by default. The behavior when autoneg is off has not changed. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18dwc_eth_qos: do not clear pause flags from phy_device->supportedNiklas Cassel
phy_device->supported is originally set by the PHY driver. The ethernet driver should filter phy_device->supported to only contain flags supported by the IP. The IP supports setting rx and tx flow control independently, therefore SUPPORTED_Pause and SUPPORTED_Asym_Pause should not be cleared. If the flags are cleared, pause frames cannot be enabled (even if they are supported by the PHY). Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18Merge tag 'mac80211-for-davem-2016-10-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This is relatively small, mostly to get the SG/crypto from stack removal fix that crashes things when VMAP stack is used in conjunction with software crypto. Aside from that, we have: * a fix for AP_VLAN usage with the nl80211 frame command * two fixes (and two preparation patches) for A-MSDU, one to discard group-addressed (multicast) and unexpected 4-address A-MSDUs, the other to validate A-MSDU inner MAC addresses properly to prevent controlled port bypass ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18bnx2: fix locking when netconsole is usedIvan Vecera
Functions bnx2_reg_rd_ind(), bnx2_reg_wr_ind() and bnx2_ctx_wr() can be called with IRQs disabled when netconsole is enabled. So they should use spin_{,un}lock_irq{save,restore} instead of _bh variants. Example call flow: bnx2_poll() ->bnx2_poll_link() ->bnx2_phy_int() ->bnx2_set_remote_link() ->bnx2_shmem_rd() ->bnx2_reg_rd_ind() -> spin_lock_bh(&bp->indirect_lock); spin_unlock_bh(&bp->indirect_lock); ... -> __local_bh_enable_ip static inline void __local_bh_enable_ip(unsigned long ip) WARN_ON_ONCE(in_irq() || irqs_disabled()); <<<<<< WARN Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: dsa: bcm_sf2: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 After this patch: $ modinfo drivers/net/dsa/bcm_sf2.ko | grep alias alias: platform:brcm-sf2 alias: of:N*T*Cbrcm,bcm7445-switch-v4.0C* alias: of:N*T*Cbrcm,bcm7445-switch-v4.0 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: dsa: b53: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias $ After this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias alias: of:N*T*Cbrcm,bcm63xx-switchC* alias: of:N*T*Cbrcm,bcm63xx-switch alias: of:N*T*Cbrcm,bcm6368-switchC* alias: of:N*T*Cbrcm,bcm6368-switch alias: of:N*T*Cbrcm,bcm6328-switchC* alias: of:N*T*Cbrcm,bcm6328-switch alias: of:N*T*Cbrcm,bcm3384-switchC* alias: of:N*T*Cbrcm,bcm3384-switch Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: hisilicon: Fix hns_mdio module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias alias: platform:Hi-HNS_MDIO alias: acpi*:HISI0141:* After this patch: $ modinfo drivers/net/ethernet/hisilicon//hns_mdio.ko | grep alias alias: platform:Hi-HNS_MDIO alias: of:N*T*Chisilicon,hns-mdioC* alias: of:N*T*Chisilicon,hns-mdio alias: of:N*T*Chisilicon,mdioC* alias: of:N*T*Chisilicon,mdio alias: acpi*:HISI0141:* Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: qcom/emac: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac After this patch: $ modinfo drivers/net/ethernet/qualcomm/emac/qcom-emac.ko | grep alias alias: platform:qcom-emac alias: of:N*T*Cqcom,fsm9900-emacC* alias: of:N*T*Cqcom,fsm9900-emac Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: hns: Fix hns_dsaf module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias alias: acpi*:HISI00B2:* alias: acpi*:HISI00B1:* After this patch: $ modinfo drivers/net/ethernet/hisilicon/hns/hns_dsaf.ko | grep alias alias: acpi*:HISI00B2:* alias: acpi*:HISI00B1:* alias: of:N*T*Chisilicon,hns-dsaf-v2C* alias: of:N*T*Chisilicon,hns-dsaf-v2 alias: of:N*T*Chisilicon,hns-dsaf-v1C* alias: of:N*T*Chisilicon,hns-dsaf-v1 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: ethernet: nb8800: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/aurora/nb8800.ko | grep alias alias: of:N*T*Csigma,smp8734-ethernetC* alias: of:N*T*Csigma,smp8734-ethernet alias: of:N*T*Csigma,smp8642-ethernetC* alias: of:N*T*Csigma,smp8642-ethernet alias: of:N*T*Caurora,nb8800C* alias: of:N*T*Caurora,nb8800 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: nps_enet: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias alias: of:N*T*Cezchip,nps-mgt-enetC* alias: of:N*T*Cezchip,nps-mgt-enet Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17cxgb4: fix memory leak of qe on error exit pathColin Ian King
A memory leak of qe occurs when t4_sched_queue_unbind fails, so fix this by free'ing qe on the error exit path. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: Require exact match for TCP socket lookups if dif is l3mdevDavid Ahern
Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-15vmxnet3: avoid assumption about invalid dma_pa in vmxnet3_set_mc()Alexey Khoroshilov
vmxnet3_set_mc() checks new_table_pa returned by dma_map_single() with dma_mapping_error(), but even there it assumes zero is invalid pa (it assumes dma_mapping_error(...,0) returns true if new_table is NULL). The patch adds an explicit variable to track status of new_table_pa. Found by Linux Driver Verification project (linuxtesting.org). v2: use "bool" and "true"/"false" for boolean variables. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-15stmmac: fix an error code in stmmac_ptp_register()Dan Carpenter
PTR_ERR(NULL) is success. We have to preserve the error code earlier. Fixes: 7086605a6ab5 ("stmmac: fix error check when init ptp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-15net: qcom/emac: disable interrupts before calling phy_disconnectTimur Tabi
There is a race condition that can occur if EMAC interrupts are enabled when phy_disconnect() is called. phy_disconnect() sets adjust_link to NULL. When an interrupt occurs, the ISR might call phy_mac_interrupt(), which wakes up the workqueue function phy_state_machine(). This function might reference adjust_link, thereby causing a null pointer exception. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-15r8169: set coherent DMA mask as well as streaming DMA maskArd Biesheuvel
PCI devices that are 64-bit DMA capable should set the coherent DMA mask as well as the streaming DMA mask. On some architectures, these are managed separately, and so the coherent DMA mask will be left at its default value of 32 if it is not set explicitly. This results in errors such as r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded hwdev DMA mask = 0x00000000ffffffff, dev_addr = 0x00000080fbfff000 swiotlb: coherent allocation failed for device 0000:02:00.0 size=4096 CPU: 0 PID: 1062 Comm: systemd-udevd Not tainted 4.8.0+ #35 Hardware name: AMD Seattle/Seattle, BIOS 10:53:24 Oct 13 2016 on systems without memory that is 32-bit addressable by PCI devices. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14Merge tag 'wireless-drivers-for-davem-2016-10-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.9 wlcore * fix a double free regression causing hard to track crashes rtl8xxxu * fix driver reload issues, a memory leak and an endian bug rtlwifi * fix a major regression introduced in 4.9 with firmware loading on certain hardware ath10k * fix regression about broken cal_data debugfs file (since 4.7) ath9k * revert temperature compensation for AR9003+ devices, it was causing too much problems ath6kl * add Dell OEM SDIO I/O for the Venue 8 Pro ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14net: asix: Avoid looping when the device does not respondGuenter Roeck
Check answers from USB stack and avoid re-sending the request multiple times if the device does not respond. This fixes the following problem, observed with a probably flaky adapter. [62108.732707] usb 1-3: new high-speed USB device number 5 using xhci_hcd [62108.914421] usb 1-3: New USB device found, idVendor=0b95, idProduct=7720 [62108.914463] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [62108.914476] usb 1-3: Product: AX88x72A [62108.914486] usb 1-3: Manufacturer: ASIX Elec. Corp. [62108.914495] usb 1-3: SerialNumber: 000001 [62114.109109] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 [62114.109139] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffff92 [62119.109048] asix 1-3:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -110 ... Since the USB timeout is 5 seconds, and the operation is retried 30 times, this results in [62278.180353] INFO: task mtpd:1725 blocked for more than 120 seconds. [62278.180373] Tainted: G W 3.18.0-13298-g94ace9e #1 [62278.180383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ... [62278.180957] kworker/2:0 D 0000000000000000 0 5744 2 0x00000000 [62278.180978] Workqueue: usb_hub_wq hub_event [62278.181029] ffff880177f833b8 0000000000000046 ffff88017fd00000 ffff88017b126d80 [62278.181048] ffff880177f83fd8 ffff880065a71b60 0000000000013340 ffff880065a71b60 [62278.181065] 0000000000000286 0000000103b1c199 0000000000001388 0000000000000002 [62278.181081] Call Trace: [62278.181092] [<ffffffff8e0971fd>] ? console_conditional_schedule+0x2c/0x2c [62278.181105] [<ffffffff8e094f7b>] schedule+0x69/0x6b [62278.181117] [<ffffffff8e0972e0>] schedule_timeout+0xe3/0x11d [62278.181133] [<ffffffff8daadb1b>] ? trace_timer_start+0x51/0x51 [62278.181146] [<ffffffff8e095a05>] do_wait_for_common+0x12f/0x16c [62278.181162] [<ffffffff8da856a7>] ? wake_up_process+0x39/0x39 [62278.181174] [<ffffffff8e095aee>] wait_for_common+0x52/0x6d [62278.181187] [<ffffffff8e095b3b>] wait_for_completion_timeout+0x13/0x15 [62278.181201] [<ffffffff8de676ce>] usb_start_wait_urb+0x93/0xf1 [62278.181214] [<ffffffff8de6780d>] usb_control_msg+0xe1/0x11d [62278.181230] [<ffffffffc037d629>] usbnet_write_cmd+0x9c/0xc6 [usbnet] [62278.181286] [<ffffffffc03af793>] asix_write_cmd+0x4e/0x7e [asix] [62278.181300] [<ffffffffc03afb41>] asix_set_sw_mii+0x25/0x4e [asix] [62278.181314] [<ffffffffc03b001d>] asix_mdio_read+0x51/0x109 [asix] ... Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14net/mlx4_en: fixup xdp tx irq to match rxBrenden Blanco
In cases where the number of tx rings is not a multiple of the number of rx rings, the tx completion event will be handled on a different core from the transmit and population of the ring. Races on the ring will lead to a double-free of the page, and possibly other corruption. The rings are initialized by default with a valid multiple of rings, based on the number of cpus, therefore an invalid configuration requires ethtool to change the ring layout. For instance 'ethtool -L eth0 rx 9 tx 8' will cause packets received on rx0, and XDP_TX'd to tx48, to be completed on cpu3 (48 % 9 == 3). Resolve this discrepancy by shifting the irq for the xdp tx queues to start again from 0, modulo rx_ring_num. Fixes: 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14qed: Additional work toward cleaning C=1Yuval Mintz
This cleans many of the warnings that would arise in qed as a result of compilations with C=1; Most of those are the addition of missing 'static' to functions, although there are several other fixes as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14qed*: Fix Kconfig dependencies with INFINIBAND_QEDRYuval Mintz
The qedr driver would require a tristate Kconfig option [to allow it to compile as a module], and toward that end we've added the INFINIBAND_QEDR option. But as we've made the compilation of the qed/qede infrastructure required for RoCE dependent on the option we'd be facing linking difficulties in case that QED=y or QEDE=y, and INFINIBAND_QEDR=m. To resolve this, we seperate between the INFINIBAND_QEDR option and the infrastructure support in qed/qede by introducing a new QED_RDMA option which would be selected by INFINIBAND_QEDR but would be a boolean instead of a tristate; Following that, the qed/qede is fixed based on this new option so that all config combinations would be supported. Fixes: cee9fbd8e2e9 ("qede: add qedr framework") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14qed: Fix static checker warning.Yuval Mintz
Smatch compains about qed_roce_ll2_tx() dereference of the 'cdev' variable while testing its validity later. As the validation checking is an over-kill [variable would always be set], simply remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14IB/ipoib: move back IB LL address into the hard headerPaolo Abeni
After the commit 9207f9d45b0a ("net: preserve IP control block during GSO segmentation"), the GSO CB and the IPoIB CB conflict. That destroy the IPoIB address information cached there, causing a severe performance regression, as better described here: http://marc.info/?l=linux-kernel&m=146787279825501&w=2 This change moves the data cached by the IPoIB driver from the skb control lock into the IPoIB hard header, as done before the commit 936d7de3d736 ("IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses"). In order to avoid GRO issue, on packet reception, the IPoIB driver stash into the skb a dummy pseudo header, so that the received packets have actually a hard header matching the declared length. To avoid changing the connected mode maximum mtu, the allocated head buffer size is increased by the pseudo header length. After this commit, IPoIB performances are back to pre-regression value. v2 -> v3: rebased v1 -> v2: avoid changing the max mtu, increasing the head buf size Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14net: wan: slic_ds26522: Allow driver to built if COMPILE_TEST is enabledJavier Martinez Canillas
The driver only has runtime but no build time dependency with FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE. So it can be built for testing purposes if the COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 21:51:32 +0000