aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-11-06hisax: remove bad udelay call to fix build error on ARMMartin Michlmayr
The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06qlge: Set PCIe reset type for EEH to fundamental.Ron Mercer
This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06qlge: Fix early exit from mbox cmd complete wait.Ron Mercer
This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: fix traffic hangs on Tx with ioatdma loadedDon Skidmore
When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabledYi Zou
When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ixgbe: Fix gso_max_size for 82599 when DCB is enabledYi Zou
The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06macsonic: fix crash on PowerBook 520Finn Thain
No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06NET: cassini, fix lock imbalanceJiri Slaby
Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06ems_usb: Fix byte order issues on big endian machinesSebastian Haas
CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06be2net: Bug fix to send config commands to hardware after netdev_registerAjit Khaparde
Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06be2net: fix to set proper flow control on resumeAjit Khaparde
If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-11-06rt2x00: Don't queue ieee80211 work after USB removalSean Cross
This prevents the rt2x00 driver from queueing ieee80211 work after the   USB card has been removed, preventing a kernel panic. Signed-off-by: Sean Cross <sean@chumby.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06Revert "ipw2200: fix oops on missing firmware"John W. Linville
This reverts commit e6c5fc53d0f44a772398402ee8a1879818e42b4e. Based on this regression report: Date: Thu, 05 Nov 2009 15:59:16 +0100 From: Holger Schurig <holgerschurig@gmail.com> To: linux-wireless@vger.kernel.org Subject: BUG: oops when "rmmod ipw2200" This happened on wireless-testing v2.6.32-rc6-41575-g5e68bfb. I modprobed ipw2200, put it into monitor mode, used tshark a while to monitor, then I stopped tshark, "ifconfig eth2 down" and finally "rmmod ipw2200", and voila: [ 917.189620] ------------[ cut here ]------------ [ 917.189717] kernel BUG at net/wireless/core.c:543! [ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP [ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading [ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd [ 917.190680] [ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425 [ 917.190886] EIP: 0060:[<f8accf34>] EFLAGS: 00010202 CPU: 0 [ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211] [ 917.191083] EAX: f601d4c4 EBX: 00000000 ECX: 00000000 EDX: f79e8600 [ 917.191176] ESI: f601d400 EDI: f95b4350 EBP: f6009eb4 ESP: f6009e8c [ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 917.191360] Process rmmod (pid: 1763, ti=f6008000 task=f79e8130 task.ti=f6008000) [ 917.191486] Stack: [ 917.191562] f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0 [ 917.191916] <0> f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00 [ 917.192100] <0> f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8 [ 917.192100] Call Trace: [ 917.192100] [<c01407ee>] ? trace_hardirqs_on+0xb/0xd [ 917.192100] [<f94fd030>] ? unregister_ieee80211+0xe/0x27 [libipw] [ 917.192100] [<f95a9d4f>] ? ipw_pci_remove+0x59/0x227 [ipw2200] [ 917.192100] [<c0207fca>] ? pci_device_remove+0x19/0x39 [ 917.192100] [<c02b93a4>] ? __device_release_driver+0x59/0x9d [ 917.192100] [<c02b944f>] ? driver_detach+0x67/0x85 [ 917.192100] [<c02b88d6>] ? bus_remove_driver+0x69/0x85 [ 917.192100] [<c02b9878>] ? driver_unregister+0x4d/0x54 [ 917.192100] [<c02081c3>] ? pci_unregister_driver+0x28/0x71 [ 917.192100] [<f95a9cf4>] ? ipw_exit+0x1c/0x1e [ipw2200] [ 917.192100] [<c0148e2b>] ? sys_delete_module+0x192/0x1ef [ 917.192100] [<c0162cdb>] ? remove_vma+0x52/0x58 [ 917.192100] [<c01028bb>] ? sysenter_exit+0xf/0x18 [ 917.192100] [<c0102888>] ? sysenter_do_call+0x12/0x36 [ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00 [ 917.192100] EIP: [<f8accf34>] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:f6009e8c [ 917.203718] ---[ end trace bcaaf449945a5100 ]--- Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06be2net: Fix CQE_STATUS_EXTD_SHIFT defineSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05virtio_net: rename driver struct to please modpostUwe Kleine-König
Commit 3d1285b (move virtnet_remove to .devexit.text) introduced the first reference to __devexit in struct virtio_driver virtio_net which upset modpost ("Section mismatch in reference from the variable virtio_net to the function .devexit.text:virtnet_remove()"). Fix this by renaming virtio_net to virtio_net_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Michael S. Tsirkin <mst@redhat.com> Blame-taken-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04rtl8187: Fix kernel oops when device is removed when LEDS enabledLarry Finger
As reported by Rick Farina (sidhayn@gmail.com), removing the RTL8187 USB stick, or unloading the driver rtl8187 using rmmod will cause a kernel oops. There are at least two forms of the failure, (1) BUG: Scheduling while atomic, and (2) a fatal kernel page fault. This problem is reported in Bugzilla #14539. This problem does not occur for kernel 2.6.31, but does for 2.6.32-rc2, thus it is technically a regression; however, bisection did not locate any faulty patch. The fix was found by comparing the faulty code in rtl8187 with p54usb. My interpretation is that the handling of work queues in mac80211 changed enough to the LEDs to be unregistered before tasks on the work queues are cancelled. Previously, these actions could be done in either order. (Herton Ronaldo Krzesinski <herton@mandriva.com.br> reports that the code is the same in 2.6.31, so this may be a candidate for 2.6.31.x. -- JWL) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Rick Farina <sidhayn@gmail.com> Tested-by: Rick Farina <sidhayn@gmail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04isdn: hfc_usb: Fix read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04isdn: hisax: Fix test in waitforxfwRoel Kluin
The negation makes it a bool before the comparison and hence it will never be 0x40. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04isdn: eicon: Return on errorJiri Slaby
When diva_strace_read_uint returns an error, return even from process_idi_event, because l2_state is uninitialized. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Acked-by: Armin Schindler <armin@melware.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04isdn: eicon: Use offsetofJiri Slaby
Use offsetof instead of explicit implementation. * fixes bug with omitted & like: len = (byte)(((T30_INFO *) 0)->station_id + 20) * avoids compiler warnings with wrong sizes (pointer-to-char cast): len = (byte)(&(((T30_INFO *) 0)->universal_6)); * cleans up the code Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Acked-by: Armin Schindler <armin@melware.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04misdn: Fix reversed 'if' in st_own_ctrlDan Carpenter
The current code probably returns -EINVAL a lot. Otherwise it would oops. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04isdn: hisax: Fix lock imbalance.Jiri Slaby
Add omittted unlocks to 2 functions. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Karsten Keil <Karsten-Keil@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04DaVinci EMAC: correct param for ISRTonyliu
emac_irq is declared as: static irqreturn_t emac_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct emac_priv *priv = netdev_priv(ndev); ... Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this. Signed-off-by: Tonyliu <Bo.Liu@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04cdc_ether: additional Ericsson MBM PID's to the whitelistTorgny Johansson
Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-30libertas if_usb: Fix crash on 64-bit machinesDavid Woodhouse
On a 64-bit kernel, skb->tail is an offset, not a pointer. The libertas usb driver passes it to usb_fill_bulk_urb() anyway, causing interesting crashes. Fix that by using skb->data instead. This highlights a problem with usb_fill_bulk_urb(). It doesn't notice when dma_map_single() fails and return the error to its caller as it should. In fact it _can't_ currently return the error, since it returns void. So this problem was showing up only at unmap time, after we'd already suffered memory corruption by doing DMA to a bogus address. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k: fix misplaced semicolon on rate controlLuis R. Rodriguez
The patch e43419f9: ath9k: downgrade assert in rc.c for invalid rate downgraded an ASSERT to a WARN_ON() but also misplaced a semicolon at the end of the second check. What this did was force the rate control code to always return the rate even if we should have warned about it. Since this should not have happened anymore anyway this fix isn't critical as the proper rate would have been returned anyway. Cc: stable@kernel.org Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30b43: Fix DMA TX bounce buffer copyingMichael Buesch
b43 allocates a bouncebuffer, if the supplied TX skb is in an invalid memory range for DMA. However, this is broken in that it fails to copy over some metadata to the new skb. This patch fixes three problems: * Failure to adjust the ieee80211_tx_info pointer to the new buffer. This results in a kmemcheck warning. * Failure to copy the skb cb, which contains ieee80211_tx_info, to the new skb. This results in breakage of various TX-status postprocessing (Rate control). * Failure to transfer the queue mapping. This results in the wrong queue being stopped on saturation and can result in queue overflow. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30rt73usb.c : more idsXose Vazquez Perez
stolen from windows inf file(07/17/2009, 1.03.05.0000) Ovislink 0x1b75, 0x7318 MSI 0x0db0, 0x4600 WideTell 0x7167, 0x3840 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ipw2200: fix oops on missing firmwareZhu Yi
For non-monitor interfaces, the syntax for alloc_ieee80211/free_80211 is wrong. Because alloc_ieee80211 only creates (wiphy_new) a wiphy, but free_80211() does wiphy_unregister() also. This is only correct when the later wiphy_register() is called successfully, which apparently is not the case for your fw doesn't exist one. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30sky2: set carrier off in probeBrandon Philips
Before bringing up a sky2 interface up ethtool reports "Link detected: yes". Do as ixgbe does and netif_carrier_off() on probe(). Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of PreMax ethernet pcmcia card, and some Sierra Wireless serial card(AC555, AC7xx, AC8xx). use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo framesRaimonds Cicans
r8169 card drop incoming VLAN tagged MTU byte large jumbo frames It looks to compare current and maximal packet sizes hardware use '<' operator, not '<='. Bug introduced by commit fdd7b4c3302c93f6833e338903ea77245eb510b4 ("r8169: fix crash when large packets are received") Signed-off-by: Raimonds Cicans <ray@apollo.lv> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ibmtr: possible Read buffer overflow?roel kluin
Prevent read outside array bounds. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29e1000e: rework disable K1 at 1000Mbps for 82577/82578Bruce Allan
This patch reworks a previous workaround (commit 7d3cabbcc) for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. The original version of this workaround was found to be incomplete. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29e1000e: config PHY via software after resetsBruce Allan
On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an issue with the hardware automatically configuring the PHY with contents from the EEPROM after the PHY is reset, so do the configuration by the driver instead. This was already similarly done for some 82566 parts in e1000_phy_hw_reset_ich8lan() but needs to be done after other resets, so move the PHY configuration code to its own function and call after all PHY resets. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29e100: e100_phy_init() isolates selected PHY, causes 10 second boot delayBruce Allan
A change in how PHYs are electrically isolated caused all PHYs to be isolated followed by reverting that isolation for the selected PHY. Unfortunately, isolating the selected PHY for even a short period of time can result in DHCP negotiation taking more than 10 seconds on certain embedded configurations delaying boot time as reported by Bernhard Kaindl. This patch reverts the change to how PHYs are isolated yet still works around the issue for 82552 needing the selected PHY's BMCR register to be written after the unused PHYs are isolated. This code is moved below the setting of nic->phy ID in order to do the 82552-specific workaround. Cc: Bernhard Kaindl <bernhard.kaindl@gmx.net> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29netdev: usb: dm9601.c can drive a device not supported yet, add support for itJanusz Krzysztofik
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix firmware mailbox command timeout.Ron Mercer
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix EEH handling.Ron Mercer
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-28bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28virtio-net: fix data corruption with OOMMichael S. Tsirkin
virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28sfc: Set ip_summed correctly for page buffers passed to GROBen Hutchings
Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27airo: Reorder tests, check bounds before elementRoel Kluin
Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas spi: fix sparse errorsHolger Schurig
This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: add 'struct b43_wl' missing declarationMiguel Boton
'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: Fix Bugzilla #14181 and the bug from the previous 'fix'Larry Finger
"b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 22:58:03 +0000