aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-08-14[PATCH] zd1211rw: Firmware version vs bootcode version mismatch handlingDaniel Drake
This is needed for my G220F, otherwise it fails to initialize after the existing firmware upload routine. The vendor driver actually does more than what I have done here: it downloads the firmware + boot code, modifies it, and uploads it again (really messy). I have not copied that part over, as my device can get on its feet without it. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Add ID for Allnet ALLSPOT Hotspot finderDaniel Drake
Tested by Wonka on IRC. zd1211 chip 157e:3204 v4810 high 00-11-e0 AL7230B_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Add ID for Senao NUB-8301Daniel Drake
Tested by lyakh on IRC zd1211 chip 1740:2000 v4721 high 00-02-6f AL7230B_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Support AL7230B RFDaniel Drake
This patch adds support for another Airoha RF which is present in some ZD1211 adapters. This RF supports 802.11a as well as 802.11b/g, but 802.11a connectivity is not yet supported by this driver. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: AL2230 ZD1211B vendor syncDaniel Drake
This patch synchronizes our code to some recent vendor driver modifications. A new PHY layout is supported, some values are tweaked, and the AL2230 is now programmed over a new interface which is many times faster. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Match vendor driver IFS valuesDaniel Drake
The vendor driver resets the IFS value every time the channel changes, to this one. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: ZD1211B ASIC/FWT, not jointly decoderDaniel Drake
The vendor driver chooses this value based on an ifndef ASIC, and ASIC is never defined. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14Merge branch 'from-linus' into upstreamJohn W. Linville
2006-08-11USB: usbtest.c: unsigned retval makes ctrl_out return 0 in case of errorOrjan Friberg
In my quest to try and figure out why test 14 (control write) doesn't work with my EZ-USB board, I noticed that sometimes testusb reported no error even though the kernel log complained "byte 0 is 0 not 2" etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: Additional PID for SHARP W-ZERO3Norihiko Tomiyama
I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: appletouch: fix atp_disconnectJohannes Berg
appletouch uses urb->transfer_dma after having freed the urb, this shows up only if the system is compiled with slab debugging. This patch fixes it by reordering the free calls. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: removed a unbalanced #endif from ohci-au1xxx.cYoichi Yuasa
This patch has removed a unbalanced #endif from ohci-au1xxx.c . Please apply before 2.6.18 release. Error message was: In file included from drivers/usb/host/ohci-hcd.c:909: drivers/usb/host/ohci-au1xxx.c:113:2: #endif without #if Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: unusual_devs entry for A-VOX WSX-300ER MP3 playerDavid Kuehling
This patch (as763) adds an unusual_devs entry for the A-VOX WSX-300ER MP3 player. From: David Kuehling <dvdkhlng@gmx.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11PCI: remove dead HOTPLUG_PCI_SHPC_PHPRM_LEGACY option.Dave Jones
Nothing in the tree references this config option. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11pciehp: make pciehp build for powerpcKristen Carlson Accardi
Make pciehp build on powerpc Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-10Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-mmcGreg Kroah-Hartman
2006-08-10Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-armGreg Kroah-Hartman
2006-08-09[PATCH] PATCH: 2.6.18 oops on boot fix for IDEAlan Cox
When the IDE fix for Jmicron went in one piece went walking somewhere (send log shows my end somehow). Without this sometimes you get an oops on boot. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Greg Kroah-Hartman
2006-08-09Merge branch 'upstream-greg' of ↵Greg Kroah-Hartman
gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-08-09Merge branch 'upstream-greg' of ↵Greg Kroah-Hartman
gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-08-09[PATCH] libata: clear sdev->locked on door lock failureTejun Heo
SCSI EH locks door if sdev->locked is set. Sometimes door lock command fails continuously (e.g. when medium is not present) and as libata uses EH to acquire sense data, this easily creates a loop where a failed lock door invokes EH and EH issues lock door on completion. This patch clears sdev->locked on door lock failure to break this loop. This problem has been spotted and diagnosed by Unicorn Chang <uchang@tw.ibm.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09[PATCH] Fix compile problem when sata debugging is onKeith Owens
Fix a sata debug print statement that still uses an old variable name. Signed-off-by: Keith Owens <kaos@ocs.com.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09[PATCH] myri10ge: always re-enable dummy rdmas in myri10ge_resumeBrice Goglin
Dummy RDMA are always enabled on device startup since commit 9a71db721a2cbb9921b929b2699ab181f5a3c6c0 (to work around buggy PCIe chipsets which do not implement resending properly). But, we also need to always re-enable them when resuming the device. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08Merge branch 'tj-upstream-fixes' of git://htj.dyndns.org/libata-tj into ↵Jeff Garzik
upstream-fixes
2006-08-08Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbGreg Kroah-Hartman
2006-08-08V4L/DVB (4431): Add several error checks to dstYeasah Pell
Signed-off-by: Yeasah Pell <yeasah@shwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4430): Quickcam_messenger compilation fixDiego Calleja
In bugzilla #6943, Maxim Britov reported: "I can enable Logitech quickcam support in .config, but it want be compile. I have to add into drivers/media/video/Makefile: obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/" He's right, just enable that driver as module while disabling every other driver that gets into that directory, nothing will get compiled. This patch fixes the Makefile. Signed-off-by: Diego Calleja <diegocg@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4427): Fix V4L1 Compat for VIDIOCGPICT ioctlMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4419): Turn on the Low Noise Amplifier of the Samsung tuners.Hans Verkuil
Without the LNA these tuners perform very poorly (read 'unwatchable') when the signal is weak. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4418): Fix broken msp3400 module option 'standard'Hans Verkuil
Due to a wrong statement order the 'standard' module option didn't work for 'G' model chips. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4416): Cx25840_read4 has wrong endianness.Hans Verkuil
cx25840_read4 assembled the bytes in the wrong order. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4411): Fix minor errors in build filesTrent Piepho
In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one!Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4399): Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4395): Restore compat_ioctl in pwc driverLuc Van Oostenryck
The compat_ioctl support of the pwc driver was dropped during the last update of the driver. I suppose it was by mistake. If yes here is the patch to restore the support. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-08V4L/DVB (4371a): Fix V4L1 dependencies on compat_ioctl32Mauro Carvalho Chehab
Compat32 should be able to handle V4L1 ioctls if the old API support were selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-07[TG3]: Fix tx race conditionMichael Chan
Fix a subtle race condition between tg3_start_xmit() and tg3_tx() discovered by Herbert Xu <herbert@gondor.apana.org.au>: CPU0 CPU1 tg3_start_xmit() if (tx_ring_full) { tx_lock tg3_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in tg3_tx() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if tg3_tx() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in tg3_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in tg3_tx() before calling netif_wake_queue(). 4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier. Herbert and David suggested using the memory barrier instead of volatile. 5. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. 6. Update version to 3.65. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-07[TG3]: skb->dev assignment is done by netdev_alloc_skbChristoph Hellwig
All caller of netdev_alloc_skb need to assign skb->dev shortly afterwards. Move it into common code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-07[S390] lost interrupt after chpid vary off/on cycle.Peter Oberparleiter
I/O on a CCW device may stall if a channel path to that device is logicaly varied off/on. A user I/O interrupt can get misinterpreted as interrupt for an internal path verification operation due to a missing check and is therefore never reported to the device driver. Correct check for pending interruptions before starting path verification. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] retry after deferred condition code.Cornelia Huck
Do a retry of read device characteristics / read configuration data when a deferred condition code 1 is encountered in ccw_device_wake_up(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] tape class return value handling.Heiko Carstens
Without this patch register_tape_dev() will always fail, but might return a value that is not an error number. This will lead to accesses to already freed memory areas... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[MMC] Another stray 'io' referencePierre Ossman
Another misuse of the global 'io' variable instead of the local 'base'. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06[MMC] Fix base address configuration in wbsdPierre Ossman
There were some confusion about base I/O variables in the wbsd driver. Seems like things have been working on shear luck so far. The global 'io' variable (used when manually configuring the resources) was used instead of the local 'base' variable. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06[ARM] Fix Acorn platform SCSI driver build failuresRussell King
SCSI folk forgot to fix up all the uses of 'buffer' before deleting this struct member. Do it for them to rescue the resulting build failures. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06[ARM] Fix NCR5380-based SCSI card buildRussell King
The NCR5380-based SCSI cards need the SCSI SPI transport selected to build correctly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: ati_remote - use msec instead of jiffies Input: ati_remote - add missing input_sync() Input: ati_remote - relax permissions sysfs module parameters Input: ati_remote - make filter time a module parameter Input: atkbd - restore repeat rate when resuming Input: trackpoint - activate protocol when resuming Input: logips2pp - fix button mapping for MX300 Input: keyboard - change to use kzalloc Input: serio/gameport - check whether driver core calls succeeded Input: spaceball - make 4000FLX Lefty work Input: keyboard - simplify emulate_raw() implementation Input: keyboard - remove static variable and clean up initialization Input: hiddev - use standard list implementation Input: add missing handler->start() call Input: HID - fix potential out-of-bound array access Input: fix list iteration in input_release_device() Input: iforce - add Trust Force Feedback Race Master support Input: iforce - check array bounds before accessing elements Input: libps2 - warn instead of oopsing when passed bad arguments Input: fm801-gp - fix use after free ...
2006-08-06[PATCH] SCX200_ACB: eliminate spurious timeout errorsDavid Woodhouse
While busy-waiting for completion, check the hardware after scheduling; don't schedule and then immediately check the _timeout_. If the yield() took a long time (as it does on my OLPC prototype board when it's busy), we'd report a timeout even though the hardware was now ready. This fixes it, and also switches the yield() for a cond_resched() because we don't actually want to be _that_ nice about it. I see nice tightly-packed SMBus transactions now, rather than waiting for milliseconds between successive phases. Actually, we shouldn't be busy-waiting here at all. We should be using interrupts. That's an exercise for another day though. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Christer Weinigel <wingel@nano-system.com> Cc: <Jordan.Crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] pnpacpi: reject ACPI_PRODUCER resourcesmatthieu castet
A patch in -mm kernel correct the parsing of "address resources" of pnpacpi. Before we assumed it was memory only, but it could be also IO. But this change show an hidden bug : some resources could be producer type that are not handled by pnp layer. So we should ignore the producer resources. This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292). Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer resources. Before correcting "address resources" parsing, it was seen as memory and was harmless, because nobody tried to reserve this memory range as it should be IO. With the correction it become IO resources, and make failed all others device that want to register IO in this range and use pnp layer (like a ISA sound card). The solution is to ignore producer resources Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: "Brown, Len" <len.brown@intel.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 21:30:54 +0000